bioplastics copy
DESCRIPTION
TRANSCRIPT
BIOPLASTICS
By:Mugdha NigamME Biotech
Bio-Plastics Bio-based Plastics
Major focus is on “origin of life” or where did Carbon come from..
Biodegradable Plastics
Focus is on “end of life or disposal”
Defined by EN13432 and ASTM D6400
What are Biodegradable plastics?
Biodegradable or Compostable plastics are those that meet all the scientifically recognized standards of biodegradability of plastics and plastic products independent of their carbon origin.
According to ASDM D6400, biodegradability is measured on Mineralization, Disintegration and Safety of the material.
- atleast 90% conversion to CO2, water and biomass via microbial assimilation.
- should occur within a time period of 180 days or less.
- no impacts on plants.
- etc……
Drivers for Bioplastics Reduced environmental impact. Disposal issues – Landfills. Concerns about human health. Legislative initiatives.
Lifecycle of Bioplastics
Types of Bioplastics (Kaeb, 2009)
Starch and Starch blends Virgin starch is brittle and difficult to be
processed. This problem is mainly caused by the presence of strong inter‐ and intra‐ molecular hydrogen bonds between the starch macromolecules.
Thermoplasticized starch Cross-linked starch Starch esters Starch – Biopolymer blends
High density Low resistance to oil and solvents Easy to process bur vulnerable to
degradation. Sensitive to moisture High water vapour permeability
Cellulose based Bioplastics Cellulose-based bioplastics are typically chemically-modified
plant cellulose materials such as cellulose acetate (CA). Common cellulose sources include wood pulp, hemp and
cotton. These biodegradable plastics can be processed on
conventional injection molding machines or on extruders adapted to their specific processing properties.
The thermal resistance is somewhat lower, but the permeability to steam and oxygen is relatively high compared to that of standard plastics. The material is resistant to oils and fats and, for a short while, even to weak acids and alkalies.
Polylactic Acid (PLA) PLA is an aliphatic
polyester. The conformational ratio
of L- and D- lactic acid in the polyester decides the material properties.
Degrades within 4 to 6 weeks .
High stability Transparency
The biology of Polyhydroxyalkanaotes (PHA)
The carbon sources are assimilated, converted into hydroxyalkanoate (HA) compounds and finally polymerized into high molecular weight PHAs and stored as water insoluble granules in the cell cytoplasm.
PHAs are an excellent storage compound because their presence in the cytoplasm, even in large quantities does not disturb the osmotic pressure of the cell.
These granules may be surrounded by a phospholipid monolayer that contains specific granule associated proteins.
PHA granules are intriguingly maintained in an amorphous state in vivo.
A) Transmission Electron micrograph of Ralstonia eutropha H16 containing 70 wt% P(3HB) granules cultured in mineral medium containing palm kernel oil as the sole carbon source for 48h.
B) Nile Blue stained R. eutropha cells containing P(3HB) granules cultivated for 72h in mineral medium containing palm kernel oil as the sole carbon source.
Chemical Composition of PHAs approximately 150 different constituents of
PHAs have been identified as homopolymers or as copolymers.
Good thermoplastic material. Wide temperature range Lower crystallinity Tendency of shrinkage UV resistance
Monomer size
• Short chain-length PHAs (SCL-PHA): contains 3-5 carbon atoms.
• Medium chain-length PHAs (MCL-PHA): contains 6-14 carbon atoms
Number of different
monomers in PHAs
•Homopolymer: The polymerization begins with the linkage of a small molecule or monomer through ester bonds to the carboxylic group of the next monomer. A homopolymer is produced when single monomeric units are linked together. i.e P(3HB).•Heteropolymer: When two or more different monomeric units are linked together, a copolymer is formed. i.e P(3HB-co-4HB).
Biosynthetic origin
• Natural PHAs: produced naturally by microorganisms from general substrates. i.e Poly(3-hydroxybutyrate) P(3HB)
• Semisynthetic PHAs: requires addition of unusual precursors such as 3-mercaptopropionic acid to promote the biosynthesis of poly(3-hydroxybutyrate-co-3-mercaptopropionic) [P(3HB-co-3MP)]
Wild type and recombinant strains used for pilot and large scale production of PHA
Strain and Process Development for industrial production of PHA
Commercially important PHAs Poly(3-hydroxybutyrate)
[P(3HB)]
Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)]
Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)]
Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-co-3HHx)]
Comparison of mechanical properties of different PHAs with common plastics
In general SCL PHAs are highly crystalline and have poor
tensile strength. MCL PHAs are amorphous and very elastomeric.
P(3HB-co-3HHx) is an interesting copolymer. 3HHx units addition(5 mol%) into the 3HB sequence
reduces the melting point from 180 °C to less than 155 °C, thus significantly improving the thermal processability and physical properties.
Aeromonas caviae and A. hydrophila are the only found organisms to naturally produce this polymer.
All materials for short life packing like food utensils, films, electronic appliances
PHA are polyesters that can be easily stained.
Heat sensitive matrices, latex gels. Nonwoven matrices to remove facial oil.
PHA can processed into fibers.
Medical implant materials, drug controlled release matrices.
PHA oligomers used as food supplements to obtain ketone bodies.
Hydrolysed to form combustible HA methyl esters.
PhaP used to purify recombinant proteins and along with specific ligands, can achieve targeting to dieseased tissue.
Packaging Industry
Printing and Photography
Chemical Industry
Textile Industry
Medical Implants
Healthy food additives
Biofuels & additives
Protein Purification & Specific Drug delivery
Applications of PHA in various fields
Advantages
Lower fossil fuels consumption. Less dependency on non-renewable
resources. Lower CO2 and other green house gas
emissions in the atmosphere. Decrease in waste generation. Water saving.
Disadvantages Bio-based plastics are made from plant
sources like corn and maize. With already increasing demand of food supply, Plastic production from plants could create a steep cut-short.
Some bioplastics don’t readily decompose. They require high temperature in especially built pilot plants. Thus, they may not be so economical.
GMOs are used to increase productivity of PHA and PLA.
Future developments prospects High cell density within short period of
time. Controllable lysis of cells containing PHA
granules. Controllable PHA molecular weight. Use of PHA monomers as biofuels
additives. PHA blending with starch, cellulose. PHA as building blocks for new polymers.
References Lei Pei et al, Biotechnology of Biopolymers, 2010. Guo-Qiang Chen, Chemical Society Reviews,
2009. Ching-Yee Loo and Kumar Sudesh, Malayasian
Polymer Journal, 2007. Erwin T.H. Vink et al, Polymer degradation and
stability, 2002. Franziska Hempel et al, Microbial Cell Factories,
2011. bioplastics MAGAZINE
www.bioplasticsmagazine.com/
THANKYOU