bhutan power corporation limited thimphu: bhutan · pdf filebhutan power corporation limited...
TRANSCRIPT
BHUTAN POWER CORPORATION LIMITED
THIMPHU: BHUTAN
TENDER DOCUMENT
(TENDER NO. BPC/TS/TCD/2017/T-3A & 3B)
FOR
TURNKEY PACKAGE FOR DESIGN, ENGINEERING, SUPPLY,
CONSTRUCTION, TESTING & COMMISSIONING OF 66/33 kV GIS
SUBSTATION AT CHANGIDAPHU, THIMPHU AND DAMJI,GASA.
VOLUME III
JUNE 2017
CONTENTS
VOLUME I & II INSTRUCTION TO BIDDERS, CONDITIONS OF
CONTRACT, TECHNICAL SPECIFICATIONS & SAMPLE
FORMS
NOTICE INVITING BID
SECTION 1 INSTRUCTION TO BIDDERS
SECTION 2 CONDITIONS OF CONTRACT
PART I - GENERAL CONDITIONS OF CONTRACT
SECTION 3 CONDITIONS OF CONTRACT
PART II - CONDITIONS OF PARTICULAR APPLICATION
SECTION 4 TECHNICAL SPECIFICATIONS
SECTION 5 FORM OF BID, APPENDIX TO BID, FORM FOR BID
SECURITY, INTEGRITY PACT, MANUFACTURER’S
AUTHORISATION / UNDERTAKING
SECTION 6 SAMPLE FORM OF AGREEMENT
SECTION 7 SAMPLE FORMS OF SECURITIES
SECTION 8 SCHEDULES OF SUPPLEMTARY INFORMATION
(ALL THE ABOVE SECTIONS ARE IN VOLUME I EXCEPT SECTION 4, WHICH IS IN
VOLUME II)
VOLUME III PRICE SCHEDULE INCLUDING BILL OF QUANTITIES
PREAMBLE TO PRICE SCHEDULE
PRICE SCHEDULES
Volume III / Preamble / Page 1 of 3
SCHEDULE OF PRICES
Preamble
1. The Contract is of turnkey nature and includes the definitive engineering
and design that shall ultimately define actual quantities of work.
2. The provisional quantities of various items of work like excavation/ filling,
foundations, supply and erection of steelwork, construction of control
building structure, supply, erection, testing and commissioning of the
electrical equipment and miscellaneous work items such as fire protection
system for transformers, air conditioning etc. for the proposed substation
are given in the price-schedule. However, the quantities may vary
consequent to actual execution of the work. The payment shall be made for
the actual quantities used for various items. Items with quantity ‘LOT’ will
not be eligible for any variation in payment irrespective of the quantities of
the constituent sub-items.
3. The Contract Price shall be adjusted for the actual and correct quantities as
executed and duly approved by the Employer on the basis of the proposed
all inclusive unit rates to arrive at the final Contract Price.
4. Wherever no quantity is given against any item in the Schedule of prices, a
rate shall nevertheless be entered against that item. This rate shall be used,
in case the item is required to be used during actual execution of the
contract.
5. It shall be a condition of this contract that the all-inclusive rates quoted in
Schedule of Rates / Prices shall not be varied for reasons of change in
respective quantities.
6. Further, it shall also be an important condition of this contract that there
shall not be any change in Unit Rates of items consequent to revision of
labour rates by the Royal Government of Bhutan.
7. The supply rate against each item shall be an all-inclusive rate, and be
inclusive of engineering, manufacture, supply, freight, transport,
insurance, etc. The Bidder shall indicate the all-inclusive rate separately
for each item. Further, the all-inclusive unit rates shall be on FAS basis
inclusive of ex-works price, packing and forwarding charges, railway
freight, transport charges to actual work site, storage where necessary,
charges for transit insurance, insurance of material/ goods at site. Bidder
shall quote prices inclusive of BST and Customs Duties, as applicable and
applicable percentage BST and Customs Duty shall be brought out
separately.
8. All labour, supervision, inspection, testing and commissioning costs
should be covered in Schedules for erection of substation equipment. The
charges/ expenses to be incurred on testing and commissioning of the
Volume III / Preamble / Page 2 of 3
entire system as a whole shall be included in the prices for individual
activities.
9. The total price for each activity should cover all costs and expenses
required for supply, delivery, storage, erection, testing, commissioning and
maintenance of works together with all risks, liabilities, contigencies,
insurances and obligations imposed and implied by the Contractor.
10. Bidder shall enter prices in Schedule 4 for the supply of specified spares to
site. These prices will be considered during bid evaluation.
11. Separate price schedules for unit prices of major items and civil works
have been included for the purpose of estimation of Contract variations, if
any, due to additions and deletions to the scope of works during execution.
It shall be noted that such unit rates of constituent sub-items of “LOT”
items in the price schedule are not meant for changing the “LOT” prices
during actual execution and “LOT” price quoted by the bidder shall govern
irrespective of quantity variation for the intended works. The rates of such
sub-items can, however, be adopted for on-account payment purposes.
12. All items of work specified in the specifications have not been included in
the price-schedule. The items of work not specifically called for in the
Schedules are deemed to have been covered under the items called for, to
leave the works complete, as per the specifications. The rate quoted by the
Contractor shall be deemed to be all inclusive, to cover the smaller items
specified / required but not included in the Price-Schedule.
13. In addition to the points stipulated / highlighted in these clauses, all the
conditions mentioned in the specifications, pertaining to measurement of
quantities and unit rates of scheduled items shall apply.
14. It is deemed that the Bidder has understood the site conditions,
environment, transport facilities, soil data etc. while preparing the price
schedule and has adequately provided for them in his quoted prices. No
claims of extra compensation will be payable for items and situations not
foreseen and not incorporated by him in the schedules.
15. The wording under "Description" in the schedules is for subject matter
guidance only. The Bidder's price shall include all works as specified in
the specifications and drawings and all contractual obligations whether
specifically mentioned or not.
16. The Bidder shall, if so desired by the Employer/Engineer, furnish at any
stage of the bidding or Contract execution, break-up of prices considered
for any or all items covered in various activities.
Volume III / Preamble / Page 3 of 3
17. The measurement of quantities shall be on the following basis:
a) Structural Steel
The per M.T. rate shall cover, supply and erection of galvanized
structural steel including all connections and connecting material as
specified to constitute complete equipment support structure in the
final form contemplated in the specifications. Connecting materials
like nuts, bolts, washers, cover-plates etc. shall neither be measured
nor be paid separately, but shall be deemed to be included in the
weight of above steel members. The rectification to damage to
protective zinc surface by approved paint as specified shall be
covered under the quoted rates.
b) Foundations and Miscellaneous RCC and Other Works: -
Designs of Foundations and other RC items of work to suit actual
soil characteristics shall be submitted by the Contractor for the
approval of the Engineer, and shall be paid as per the Unit Rates of
individual items like ordinary concrete, steel reinforcement bars,
excavation etc, based on the actual quantities.
The rates for excavation shall be deemed to include execution of all
items mentioned in the specifications like earth work for casting of
foundations, benching and back filling, compacting, leveling, de-
watering etc., It also includes cost of shoring and shuttering
wherever used. The rates for concreting shall together cover cost of
all materials for shuttering, casting concrete, curing and also cost of
all materials related with the item.
Unit rates for reinforcement shall include supply, cutting, bending,
tying, properly placing, providing lap and every other work needed
for casting of the concrete, as specified. Similarly the Rates for
other items like stone masonry revetment shall be deemed to be all-
inclusive.
c) Control Building and Other Buildings: -
Rates for control room building and other buildings shall be item
rate. The quoted rates shall cover, supply, transportation, storage
and insurance of all materials at site, all labour and plant for
erection, finishing, etc as per specifications and drawings included
therein.
1 Supply and delivery of Equipment
2 Erection works
3Testing and commissioning including design of
Aux.systems.
4 Supply and delivery of Spares and special tools
6 Earth works
7 Supply of structural steel and reinforcement steel works
8 Supply and erection
TOTAL
0. SUMMARY SHEET
PACKAGE-3A
66/33KV INDOOR GIS SUBSTATION, CHANGIDAPHU, THIMPHU
SN DESCRIPTION Total Price(Nu)
Summary
Amount in Nu
Ex-Work CIF (Site)
1 2 3 4 = 1 x 3 5 6 7 = 1 x 2 x 5 8 = 1 x 2 x 6 9 = 4 + 7 + 8
1.0 POWER TRANSFORMER
1.1 20MVA, 66/33kV, Power transformer including
RTCCSet 2
2.0 GIS EQUIPMENT
2.1 66kV GIS transformer feeder bay (1250A, 20kA) Bay 2
2.3 66kV GIS line feeder (1250A, 20kA) Bay 2
2.4 66kV GIS Voltage Transformer (3phase, 1250A,
40kA)Bay 2
2.5 66kV GIS Bus Sectionaliser breaker (1250A, 20kA)Bay 1
3.0 CONTROL AND RELAY PANEL
3.1 66kV line feeder No 2
3.2 66kV transformer feeder No 2
3.3 Bus Section No 1
4.0 LIGHTNING ARRESTER
Unit RateBST
Total Including
Taxes
66/33KV INDOOR GIS SUBSTATION, CHANGIDAPHU,THIMPHU
1. SCHEDULE OF SUPPLY & DELIVERY
Item Description UnitProv.
Quantity
CD/
Taxes
Total Excluding
CD and BST
CD/Tax
AmountBST Amount
4.0 LIGHTNING ARRESTER
4.1 60kV Set 2
5.0 SUBSTATION AUTOMATION
SYSTEMS/SCADA
5.1Complete Substation Automation
Systems(SAS)/SCADA) and Accessories. All the
required data should report to NLDC, Thimphu.
Lot 1
6.0 33kV GAS INSULATED SWITCHGEAR
6.1 Incomer Panel, 1250A with all digital meters,
numerical relays, CT , PT & etc.No 2
6.233kV outgoing feeder panels,1250A with all digital
meters, numerical relays, CT , & etc.(refer SLD)No 4
6.3 33kV outgoing Feeders panels, 1250A with all digital
meters, numerical relays, CT, PT & etc. No 2
6.4 33kV Bus Coupler panel, 1250A with all digital
meters, numerical relays, CT, PT & etc.No 1
Schedule 1/Supply of Equipment/Page 1 of 4
Amount in Nu
Ex-Work CIF (Site)
1 2 3 4 = 1 x 3 5 6 7 = 1 x 2 x 5 8 = 1 x 2 x 6 9 = 4 + 7 + 8
Unit RateBST
Total Including
Taxes
66/33KV INDOOR GIS SUBSTATION, CHANGIDAPHU,THIMPHU
1. SCHEDULE OF SUPPLY & DELIVERY
Item Description UnitProv.
Quantity
CD/
Taxes
Total Excluding
CD and BST
CD/Tax
AmountBST Amount
7.0 STATION TRANSFORMER
7.1 250kVA, 33/0.415kV, Station transformer No 2
8.0 POWER AND CONTROL CABLES
8.1 Single Phase 66kV, 630sq.mm cable including end
terminations and sealing
8.1(a) from 66 kV Gantry (outdoor)to 66kV GIS equipment
(indoor)1
8.1(b) from 66kV GIS equipment (indoor)to primary of
2x20MVA, 66/33kV Transformer (outdoor)1
8.2Single Phase 33kV, 630 sq.mm cables including end
terminations from secondary of 2x20MVA, 66/33kV
power transformers to 33kV GIS panels
Lot 1
8.3 3cx 70 sq.mm, XLPE Al. Cable from 33kV GIS panel
to two station transformers.Lot 1
8.4 1.1kV Power and Control Cables for the entire
Lot
8.4 1.1kV Power and Control Cables for the entire
substation including 20% for spareLot 1
8.5 33kV, 3Cx300 sq. mm., XLPE, Aluminium, earthed
grade Cable alongwith associated termination &
accessories from 33kV Switchgear to Lattice
Structure
Lot 1
9.0 CABLING EQUIPMENT
9.1 All accessories for switchyard such as cable trays,
racks, conduits, bends, tees, junction boxes, etc. for
the entire cabling system including all accessoriesLot 1
Schedule 1/Supply of Equipment/Page 2 of 4
Amount in Nu
Ex-Work CIF (Site)
1 2 3 4 = 1 x 3 5 6 7 = 1 x 2 x 5 8 = 1 x 2 x 6 9 = 4 + 7 + 8
Unit RateBST
Total Including
Taxes
66/33KV INDOOR GIS SUBSTATION, CHANGIDAPHU,THIMPHU
1. SCHEDULE OF SUPPLY & DELIVERY
Item Description UnitProv.
Quantity
CD/
Taxes
Total Excluding
CD and BST
CD/Tax
AmountBST Amount
10.0 OUTDOOR LIGHTING
10.1 Complete outdoor lighting system with LED for
substation area including access road with complete
accessories, lighting panels etc.
Lot 1
11.0 INDOOR LIGHTING
11.1 Complete indoor lighting system with LED including
all lighting panels & complete accessories. Lot 1
12.0 EARTHING & LIGHTNING PROTECTION
12.1 Earthing and lightning protection systems for
switchyard complete with earth grid and mat, earth
leads, electrodes, shield wire, clamps and connectors
and all other hardware & accessories
Lot 1
13.0 BATTERY& BATTERY CHARGER
13.1 110V DC Battery and Battery charger( Maintenance
free)Set 2
14.0 DISTRIBUTION BOARDS
14.1 AC Distribution board Set 2
14.2 DC Distribution board Set 2
15.0 FIRE FIGHTING SYSTEMS
15.1 Fire Fighting Equipment and Fire Fighting System
including Emulsifier System for Power Transformers
(2Nos. power transformers)
Lot 1
Schedule 1/Supply of Equipment/Page 3 of 4
Amount in Nu
Ex-Work CIF (Site)
1 2 3 4 = 1 x 3 5 6 7 = 1 x 2 x 5 8 = 1 x 2 x 6 9 = 4 + 7 + 8
Unit RateBST
Total Including
Taxes
66/33KV INDOOR GIS SUBSTATION, CHANGIDAPHU,THIMPHU
1. SCHEDULE OF SUPPLY & DELIVERY
Item Description UnitProv.
Quantity
CD/
Taxes
Total Excluding
CD and BST
CD/Tax
AmountBST Amount
16.0 FIRE ALARM & DETECTION SYSTEM
16.1 Complete fire alarm and detection system as per
technical specificationsLot 1
17.0 SURVILANCE AND SECURITY SYSTEMS
17.1 Complete CCTV systems along with complete
accessoriesLot 1
18.0 EPABX SYSTEM
18.1Complete EPABX system suitable for optic fibre
communication along with all accessories.Lot 1
19.0 FIBRE OPTIC CABLE
19.1
1310 nm, Monomode Underground Armoured Fibre
Optic approach cable, Joint Boxes,Pigtails, clamps &
any other required accessories
Lot 1
20.0 DIESEL GENERATOR(DG) SET
21.1Diesel generator set, 50 kVA, 415V along with
control panel and required accessoriesNo. 1
21.0 33kV LATTICE STRUCTURE
33 kV out going feeders Lattice structure
inclusive of all items like Lightning Arresters,
Isolators with earth blade, insulators, hardware
accessories complete
Set 4
22.0 EOT CRANE
1.0
EOT crane of 5T capacity suitable to operate as
and when required, complete with all accessories
and slings as detailed in the specifications.
No. 1
2.02x13 m Runway rails of suitable size complete in
all respect including fixing at site.Set 1
3.0Complete trolley runway with conductors,
fixtures, insulations etc. as per Clauses.Set 1
4.0 All consumables for site assembly & erection etc. Lot 1
G-TOTAL
Schedule 1/Supply of Equipment/Page 4 of 4
1 2 3 = 1 x 2
1.0 POWER TRANSFORMER
1.1 20MVA, 66/33kV, Power transformer including RTCC Set 2
2.0 GIS EQUIPMENT
2.1 66kV GIS transformer feeder bay (1250A, 20kA) Bay 2
2.2 66kV GIS line feeder (1250A, 20kA) Bay 2
2.3 66kV GIS Voltage Transformer (3phase, 1250A, 20kA) Bay 1
2.4 66kV GIS Bus Coupler breaker (1250A, 20kA) Bay 1
3.0 CONTROL AND RELAY PANEL
3.1 66kV line feeder No 2
3.2 66kV transformer feeder No 2
3.3 Bus Section No 1
4.0 LIGHTNING ARRESTER
4.1 60kV Set 2
66/33KV INDOOR GIS SUBSTATION, CHANGIDAPHU,THIMPHU
2. SCHEDULE OF ERECTION
ItemDescription
Unit Prov. Quantity Unit Price Total
5.0 SUBSTATION AUTOMATION SYSTEMS/SCADA
5.1 Complete Substation Automation Systems(SAS)/SCADA) and Accessories. All the
required data should report to NLDC, Thimphu.Lot 1
6.0 33kV GIS Panel
6.1 Incomer Panel, 1250A with all digital meters, numerical relays, CT , PT & etc. No 2
6.2 33kV outgoing feeder panels,1250A with all digital meters, numerical relays, CT ,
& etc.(refer SLD)No 4
6.3 33kV outgoing Feeders panels, 1250A with all digital meters, numerical relays, CT,
PT & etc. No 2
6.4 33kV Bus Coupler panel, 1250A with all digital meters, numerical relays, CT, PT &
etc.1
7.0 STATION SERVICE TRANSFORMER
7.1 250kVA, 33/0.415kV, Station transformer No 2
Schedule 2/Erection/Page 1 of 3
1 2 3 = 1 x 2
ItemDescription
Unit Prov. Quantity Unit Price Total
8.0 POWER AND CONTROL CABLES
8.1 Single Phase 66kV, 630sq.mm cable including end terminations and sealing
8.1(a) from 66 kV Gantry (outdoor)to 66kV GIS equipment (indoor)
8.1(b) from 66kV GIS equipment (indoor)to primary of 2x20MVA, 66/33kV Transformer
(outdoor)
8.2Single Phase 33kV, 630 sq.mm cables including end terminations from secondary of
2x20MVA, 66/33kV power transformers to 33kV GIS panelsLot 1
8.3
3cx 70 sq.mm, XLPE Al. Cable from 33kV GIS panel to two station transformers. Lot 1
8.4 1.1kV Power and Control Cables for the entire substation Lot 1
8.5 33kV, 3Cx300 sq. mm., XLPE, Aluminium, earthed grade Cable alongwith
associated termination & accessories from 33kV Switchgear to Lattice Structure Lot 1
9.0 CABLING EQUIPMENT
9.1 All accessories for switchyard such as cable trays, racks, conduits, bends, tees, Lot 1
Lot 1
9.1 All accessories for switchyard such as cable trays, racks, conduits, bends, tees,
junction boxes, etc. for the entire cabling system including all accessoriesLot 1
10.0 OUTDOOR LIGHTING
10.1 Complete outdoor lighting system for switchyard including access road with
complete accessories, lighting panels etc.
Lot1
11.0 INDOOR LIGHTING
11.1 Complete indoor lighting system including all lighting panels & complete
accessoriesLot 1
12.0 EARTHING & LIGHTNING PROTECTION
12.1 Earthing and lightning protection systems for switchyard complete with earth grid
and mat, earth leads, electrodes, shield wire,clamps and connectors and all other
hardware & accessories
Lot 1
13.0 BATTERY& BATTERY CHARGER
13.1 110V DC Battery and Battery charger No 2
14.0 DISTRIBUTION BOARDS
14.1 AC Distribution board Set 2
Schedule 2/Erection/Page 2 of 3
1 2 3 = 1 x 2
ItemDescription
Unit Prov. Quantity Unit Price Total
14.2 DC Distribution board Set 2
15.0 FIRE FIGHTING SYSTEMS
15.1 Fire Fighting Equipment and Fire Fighting System including Emulsifier System for
Power Transformers (2 Nos. power transformers)Lot 1
16.0 FIRE ALARM & DETECTION SYSTEM
16.1 Complete fire alarm and detection system as per technical specifications Lot 1
17.0 SURVILANCE AND SECURITY SYSTEMS
17.1 Complete CCTV systems along with complete accessories Lot 1
18.0 EPABX SYSTEM
18.1Complete EPABX system suitable for optic fibre communication along with all
accessories.LOT 1
19.0 FIBRE OPTIC CABLE
19.11310 nm, Monomode Underground Armoured Fibre Optic approach cable, Joint
Boxes,Pigtails, clamps & any other required accessoriesLOT 1
20.0 DIESEL GENERATOR(DG) SET
20.1Diesel generator set, 50 kVA, 415V along with control panel and required
accessoriesNo. 1
21 33kV LATTICE STRUCTURE
21.133 kV out going feeders Lattice structure inclusive of all items like Lightning
Arresters, Isolators with earth blade, insulators, hardware accessories completeSet 4
22.0 EOT Crane Lot 1
TOTAL
Schedule 2/Erection/Page 3 of 3
Amount in Nu.
Item Description UnitProv.
QuantityUnit Price Total Amount Remarks
1 Complete testing and commissioning of substation including
design and engineering of Aux. Systems.Lot 1
TOTAL
66/33KV INDOOR GIS SUBSTATION, CHANGIDAPHU, THIMPHU
3. TESTING AND COMISSIONING
Schedule 3/Testing Commissioning/Page 1 of 1
1 2 3 4 = 1 x 3 5 6 7=1x2x5 8=1x2x6 9=4+7+8
1.0 66kV GIS SPARE PARTS
1.1 Set of Gasket/'O'Rings for one complete bay No 1
1.2 Rupture Disc for gas compartment Set 2
1.3 Gas Insulating Barrier for gas compartment Set 2
1.4 Circuit Breaker Trip Coils Set 5
1.5 Circuit Breaker Closing Coils Set 5
1.6 Gas Density Monitor with Pressure Swicth Set 2
1.7 Manual Operation Handle for Circuit Breaker No 2
1.8 Manual Operation Handle for DS and ES No 2
1.9 Moisture absorbent No 2
1.10 Additional SF6 Gas (5% from the total quantity) No 1
1.11 Current Transformer( ring type) Set 1
1.12 Potential Transformer No 1
1.13 Disconnector Set 1
1.14 High speed earth switch Set 1
2.0 LIGHTNING ARRESTORS
2.1 60kV Lighting Arrestor
2.1.1Single phase surge arrestor complete in all respect
including base and surge monitorNo. 1
2.1.2 Terminal connectors No. 2
2.2 33kV Lightning Arrestor
2.1.1 30kV surge arrestor including surge monitor Set 2
2.1.2 Terminal connectors Set 2
3.0 SPECIAL TOOLS FOR GIS EQUIPMENT
3.1Set of SF6 Gas Filling Adapter/Device Including
Hoses Valves, etc.Set 1
3.2 Set of SF6 Gas Filling and Evacuating Equipment Set 1
3.3 Set of Dew Point Meter Set 1
3.4 Precision Pressure Gauge Set 2
3.5 SF6 Gas Leakage Detection Device Set 1
3.6 Set of Torque Wrench Set 1
3.7 Tong tester meter(0mA to 2A) No 1
3.8 Digital Multi meter No 1
3.9 Megger (5KV) No 1
3.10 Earth resistance clamp on meter No 1
3.1 SF6 GAS Analysing equiment No 1
CD/Tax Amount BST Amount Total Including
CD/taxes & BST Remarks
66/33KV INDOOR GIS SUBSTATION, CHANGIDAPHU,THIMPHU
4. SUPPLY & DELIVERY OF ESSENTIAL SPARES AND SPECIAL TOOLS
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
Site
Schedule 4/Spares Special Tools/Page 1 of 5
CD/Tax Amount BST Amount Total Including
CD/taxes & BST Remarks
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
Site
4 TRANSFORMER SPARE PARTS
4.1 66/33kV TR
4.1.1 Breather -(Silica gel(12.5kg)) No 1
4.1.2 Gasket Set 1
4.1.3 Packing Box Set 2
4.1.4 Touch up Paint Set 1
4.1.5 HV Bushing Set 1
4.1.6 LV Bushing Set 1
4.1.7 OTI No 1
4.1.8 WTI No 1
4.2 33/0.415 kV TRANSFORMER
4.2.1 33 kV bushing mounted inside cable box No. 1
4.2.2 0.415kV bushing with metal parts with gaskets
mounted inside cable boxNo.
1
4.2.3 Set of gaskets Set 1
Set of Valve complete Set 1
5 SPECIAL TOOLS FOR POWER TRANSFORMER
5.1 Adjustable angle wrenchs(10") Set 1
5.2 Adjustable angle wrenchs(6") Set 1
5.3 Adjustable angle wrenchs(8") Set 1
5.4 Adjustable angle wrenchs(12") Set 1
5.5 C-Clamp Set 1
5.6 Manila Rope_18DIA X 10M Set 4
5.7 Pipe Wrench (10INCH) Set 1
5.8 Pipe Wrench (6INCH) Set 1
5.9 Pipe Wrench (8INCH) Set 1
5.10 Pipe Wrench (12INCH) Set 1
5.11 Torque Wrench Set 1
5.12 Paint Spray Gun Set 1
6 33kV GIS PANEL SPARE PARTS
6.1 Closing coil of each type No. 6
6.2 Trip coil of each type No. 6
6.3 Potential transformer Set 1
6.4 Current transformer Incomer Set 1
6.5 Current transformer outgoing feeder Set 2
Schedule 4/Spares Special Tools/Page 2 of 5
CD/Tax Amount BST Amount Total Including
CD/taxes & BST Remarks
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
Site
7.0 POWER CABLE
7.1 Single Phase 66kV, 630sq.mm cable Mtr. 300
7.2
33kV, 1Cx630 sq. mm., XLPE, Aluminium, earthed
grade Cable alongwith associated termination &
accessories from 20MVA transformer to 33kV GIS
Switchgear
Mtr. 100
7.3
33kV, 3Cx300 sq. mm., XLPE, Aluminium, earthed
grade Cable alongwith associated termination &
accessories from 33kV GIS Switchgear to Lattice
Structure
Mtr. 400
7.4
33kV, 3Cx70 sq. mm., XLPE, Aluminium, earthed
grade Cable alongwith associated termination &
accessories from 33kV GIS Switchgear to
2X250kVA LT Transformer
Mtr. 50
7.5 66kV Cable termination kits at gantry end Set 2
7.6 66kV cable sealing end at GIS bus Set 4
7.7 66kV cable termination kit at 2x20MVA transformer Set 2
7.8Indoor cable termination kit for 33kV incommer at
GIS Switchgear end.Set 2
7.9Indoor cable termination kit for 33kV outgoing
feeders at GIS Switchgear end.Set 4
7.10Indoor cable termination kit for station transformer
feeders at GIS Switchgear end.Set 2
7.11Out door cable terminationkit for all types of 33kV
power cable each.Set 4
8.0 CONTROL AND RELAY PANEL SPARE PARTS
66kV
8.1 Control Switches No. 1
8.2 Relays one number of each type No. 1
8.3 Meters one number of each type No. 1
Schedule 4/Spares Special Tools/Page 3 of 5
CD/Tax Amount BST Amount Total Including
CD/taxes & BST Remarks
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
Site
9.0 Spares for 110V Battery Charger
9.1 SCR for Recifier bridge No. 1
9.2 Blocking diode for rectifier bridge No. 1
9.3 Electronic control card for AVR No. 1
9.4 Electronic conrol card for AVR / ACR No. 1
9.5 Electronic control card for OCR No. 1
9.6 HRC fuse link for output ckt. Set 1
9.7 Fuse link for various control ckt. Set 1
9.8 Indicating Lamps Set 1
10.0 MCC and Control panel each
10.1 Indicating lamps (Set consists of 1 no. of each type) Set 1
10.2 Lamp holder and globes (Set consists of 1 no. of
each type)Set 1
10.3 Control fuse (Set consists of 1 no. of each type) Set 1
10.4 Push buttons (Set consists of 1 no. of each type) Set 1
10.5 Auxiliary relay (Set consists of 1 no. of each type) Set 1
10.6 Annunciation cards No 1
10.7 Sound card No 1
12.0 LIGHTING EQUIPMENT Lot 1
12.1 Outdoor lighting (LED) with complete fittings. No 5
12.2 Indoor lighting (LED) for each type including
complete fittingsNo
10
13.0 SAS/SCADA SYSTEM
13.1 SCADA Computer spares
13.1.1 Hard Disk Drive No. 1
13.2 SAS Spares
13.2.1 Bay IED No. 1
13.2.2 Longest length of fibre optic cable No. 1
13.2.3 Ethernet Switch No. 1
14.0 EPABX Lot 1
15.0 FIRE ALARM SYSTEM
15.1 Manual Call Point No. 1
15.2 Detector of each type Set 1
Schedule 4/Spares Special Tools/Page 4 of 5
CD/Tax Amount BST Amount Total Including
CD/taxes & BST Remarks
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
Site
16.0 CCTV
16.1 PC based Digital Video Recorder System Lot 1
17 EOT CRANE FOR GIS HALL
17.1
Pair of brake shoe with lining for each size of brake
used viz. D.C. operated E.M, or Hydraulic thruster
operated.
Sets 2
17.2Pair of brake linings with rivets for each size of
brake used.Sets 2
17.3 Main springs for each size of brake used. Nos. 2
17.4 Brake coils for each size of brake used. Sets 2
17.5 Thruster of each size used. No. 1
17.6 Pair of oil seals for each gear box used on crane. Sets 2
17.7 Contactors of each size used. Sets 2
17.8Fixed & moving contacts of each size of contactor
used.Set 1
17.9 3 Nos. Coils for each size of contactor used. Set 1
17.10 Overload relay for each motor. No. 1
17.11 Timers Nos. 3
17.12 3 No. fuse links of each sizes used on crane Sets 2
17.13 1 Printed circuit breaker of each size and type Set 1
17.14 Complete set of lamps for lightning and signals Set 1
17.15 Carbon brushes & holdings for each slip ring motor Sets 2
17.16 Fuse links of each size used Sets 2
17.17 Resistance element of each size and type Set 1
17.18 Communication Cards/cables
17.19 I/O Cards
17.20 Processors
17.21 Indicating lamps
Total Amount (Nu.)
TOTAL
1
Set
(for
one
compl
Schedule 4/Spares Special Tools/Page 5 of 5
1 2 3 4 (3x2)
1.0 Earth Works
1.1
Earthwork in excavation including clearing away vegetation, if any in foundations, and pits trenches, drains, road formation and
earthing etc. in all types of soils (ordinary/ hard soil) in both dry and wet conditions including shoring, strutting, dewatering, dressing
of sides and ramming of bottom & backfilling with selected earth from excavation in layers of 200 mm, watering, ramming,
consolidation & transporting excavated material (at all leads and lifts) to temporary stockpiles within the PURCHASER’s premises,
spreading, levelling etc. all complete as specified and as directed.
(a) Depth upto 3.00 m from G.L. Cu.M. 2,135
(b) Depth exceeding 3.00 m and upto 6.00 m Cu.M. 712
(c) All Depths exceeding 6.00 m. Cu.M. 178
1.2 Same as the item No.3.1 but for excavation in soft rock at all depths. Cu.M. 178
1.3 Same as the item No.3.1 but for excavation in hard rock at all depths. Cu.M. 385
1.4 Extra over items 3.1 to 3.3 for lead outside PURCHASER’s premises upto 2.00 km. Cu.M. 50
1.5
Earthwork in embankment for roads/ ramps with excavated earth obtained from items 3.1 to 3.3 above or any other excavation,
including handling and transporting excavated earth from PURCHASER’s premises at all leads, depositing in layers 200 mm deep,
watering and compacting the same to 95% Modified Proctor density, finishing and dressing, etc. complete all as specified.
Cu.M. 500
Earthwork in filling in plinth under floors, ramps, etc. including watering, ramming, compacting to 95% Modified Proctor density
and dressing to the required profiles, etc. complete, as directed by the Engineer.
(a) With excavated earth from stockpiles in the PURCHASER’s premises at all leads Cu.M. 1,423
(b) With excavated earth from approved borrow areas from outside PURCHASER’s premises upto a lead of 2.0 km Cu.M. 569
1.7 Extra over items 3.5 & 3.6 for lead from
i) 2 km - 5 km. Cu.M. 75
ii) 5 km -10 km. Cu.M. 75
1.8
Supplying approved granular / coarse granular material with maximum particle size of 20mm, brought from borrow pits outside
PURCHASER’s boundary and filling at places wherever specified including clearing away vegetation, depositing in layers not
exceeding 150 mm, watering and compaction with mechanical compaction machines to 70% of relative density including finishing to
specified slopes, etc. all as specified.
Cu.M. 80
1.9Supplying and spreading 150mm thick layer of 40mm nominal size (ungraded) of uncrushed/crushed/broken stone including
clearing vegetation and compacting the same to correct lines and levels, etc. complete. Cu.M. 750
SCHEDULE - 6: EARTH WORKS FOR 66/33 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Total Price DescriptionItem
1.6
UnitProvisional
Quantity Unit Price
Page 1 of 2
1 2 3 4 (3x2)
SCHEDULE - 6: EARTH WORKS FOR 66/33 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Total Price DescriptionItem UnitProvisional
Quantity Unit Price
1.10
Earthwork in excavation including clearing away vegetation if any, for general site grading in all types of soils (ordinary/ hard soil)
in both dry and wet conditions & transporting excavated material (at all leads and lifts) to temporary stockpiles within the
EMPLOYER’s premises, spreading, levelling etc. all complete as specified and as directed.
a) Depth upto 3.00 m from G.L. Cu.M. 2,835
b) Depth exceeding 3.00 m and upto 6.00 m Cu.M. 945
c) All Depths exceeding 6.00 m. Cu.M. 236
1.11 Same as the item No.3.10 but for excavation in soft rock at all depths. Cu.M. 236
1.12 Same as the item No.3.10 but for excavation in hard rock at all depths Cu.M. 236
1.13 Extra over items No.3.10 to 3.12 for lead outside EMPLOYER’s premises upto
a) 2.00 km. Cu.M. 70.0
b) 5.00 km Cu.M. 70.0
1.14Filling for general site grading with selected excavated surplus material including transporting within the owner's premises, and
levelling but excluding excavation, as directed by the Engineer.
a) With excavated earth from stockpiles in the EMPLOYER’s premises at all leads. Cu.M. 1600.0
b) With excavated earth from approved borrow areas from outside EMPLOYER’s premises upto
i) 2.00 km. Cu.M. 100.0
ii) 5.00 km Cu.M. 100.0
iii) 10 km Cu.M. 20.0
1.15Same as item No.3.14, but including depositing the approved excavated material in layers in line and level and compacting the same
to the finished grade level to 95% Modified Procter Density including watering, ramming,finishing, dressing etc complete.
a) With excavated earth from stockpiles in the EMPLOYER’s premises at all leads. Cu.M. 100.0
b) With excavated earth from approved borrow areas from outside EMPLOYER’s premises upto a lead of 2.0 km. Cu.M. 100.0
1.16 Extra over items 3.15 for lead of
a) 2 km to 5 km Cu.M. 100.0
b) 5 km to 10 km Cu.M. 100.0
c) 10 km to 15 km Cu.M. 100.0
Total Amount (Nu.)
Page 2 of 2
Ex-Works
FAS
excluding
BST/CD
FAS
including
BST/CD
BST% CD%
Value(BST+CD)
1 2 3 4 5=1 x 3 6 7 8=(6+7)x1 x 2 9=1 x 4
1.0 Structural Steel
1.1
Supplying, Transporting, fabricating, loading,
unloading, etc of Hot dip galvanized structural steel
work fabricated from rolled sections, Compound
Sections built from Rolled Steel Sections and plates.
(The rate shall include bolts, nuts, flat washers,
foundation bolts,pack washers & plates.)
All works strictly shall be carried out as per approved
drawings after detailed Engineering.
M.T. 8
1.2
Same as item no.1.1 above but for chequered plates
including fixing/ welding opening notches etc. all as
per specifications and drawings.(a) Non galvanised
M.T. 0.5
1.3
Supply, fabricate, transport, delivery to site, loading
and unloading, etc. for insert plates, angles for cable
trenches, precast cover slab &floor grating of approved
make and pattern, fabricated to required shapes and
sizes including making opening in same of required
shape and size fixing clamps, clips or welding as per
specifications and drawings
M.T. 0.4
2.0 Concrete and Allied Works
2.1
Supply including handling and transport complete,
tested grade steel reinforcement for all reinforced
concrete works. all as per approved drawings
a)Using high yield strength deformed bars conforming to
IS:1786 (All diameters)
i 8 mm to 12 mm MT 11
ii 16 mm dia. and above MT 5
Total Amount (Nu.)
SCHEDULE - 7: SUPPLY OF STRUCTURAL STEEL AND REINFORCEMENT STEEL WORKS FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU, THIMPHU
UnitProvisional
Quantity
Provision for BST/CD Unit Price
Total FAS
including BST/CD Item Description
Total FAS excluding
BST/CD
Page 1 of 1
Unit Price Total Price
1 2 3 4 (3x2)
1.00 Structural Steel
1.10
Erection of Main and Auxiliary structures including all works above ground level Rolled sections, Compound Sections
built from Rolled Steel Sections and plates, Miscellaneous steel work such as stairs, ladders, etc., Plates only, For water
tanks, covers, ducts, etc.
(The rate shall include bolts, nuts, washers, welding, all butt weld splices for making up member length as required and
shall also include one shop coat of red oxide zinc chrome primer after erection)
All works strictly shall be carried out as per approved drawings.
M.T. 8
1.20Same as item no.1.1 above but for chequered plates including fixing/ welding opening notches etc. all as per specifications
and drawings.(a) Non galvanisedM.T. 0.5
1.30
Fixing in position of M.S.non-galvanised floor grating of approved make and pattern, fabricated to required shapes and
sizes including making opening in same of required shape and size fixing clamps, clips or welding as per specifications
and drawings.
M.T. 0.4
2.00 Concrete and Allied Works
2.10
Providing and Laying plain or Sulphate resistant cement concrete with or without water proofing compound in blinding
layer, thickness as shown in drawings, including antiweed treatment, etc. with 1:5:10 concrete with aggregates of size
20mm downgraded including curing, etc. complete. (Rate to be inclusive of supply of all necessary material like formworks
& nails, laying in position as per specifications and as directed by Engineer for the substation area below the gravel.)
Cu.M. 9
2.20
Providing and Laying plain or Sulphate resistant cement concrete with or without water proofing compound in blinding
layer, thickness as shown in drawings, under reinforced concrete, masonry walls in foundations, grade slabs, bottom of pits,
sumps, etc. with 1:3:6 concrete with aggregates of size 20mm downgraded including curing, etc. complete. (Rate to be
inclusive of supply of all necessary material like formwork & nails, laying in position as per specifications and as directed
by Engineer.)
Cu.M. 209
(a) Providing and Laying Reinforced concrete of grade M20 with or without water proofing compound excluding
reinforcement but including formwork, with coarse aggregate of sizes 20 mm downgraded as directed by Engineer in
foundations (all types), walls, grade slabs, road pavement and any other structures including vibrating, curing, etc.
complete. (Rate to be inclusive of supply of all necessary material like formwork & nails, laying in position as per
specifications and shall include mixing of water-proofing compound where-ever directed by Engineer.)
Cu.M. 353
(b) Same as in item 2.5(a) but for concrete of grade M25. Cu.M. 15
2.40
Supplying & fixing in position all items required for Box type waterproofing treatment to basement walls & slabs as
specified by India Waterproofing Company or equivalent (Contractor to furnish 10 years Guarantee in format acceptable to
EMPLOYER.)
Sq.M. 40
Item Description Erection Price
2.30
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
Page 1 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
2.50
Placing in postion including cleaning, cutting, bending, lapping, binding with 16 SWG annealed soft iron wire/welding,
irrespective of locations & levels, all as per drawings including handling and transport complete, tested grade steel
reinforcement for all reinforced concrete works.
(a) Using high yield strength deformed bars confirming to IS:1786 (All diameters).
i. 8 mm to 12 mm M.T. 11
ii. 16 mm dia. and above M.T. 5
2.60 Providing and laying approved water proofing compound in concrete / plastering for works, where specified. Kg. 5
2.70
Supplying & fixing precast slabs including suitable formwork to provide smooth finish, casting, curing, storing, protecting
under appropiate conditions, erecting them in position , etc. complete using M20 concrete with 20mm downgraded coarse
aggregate for trench covers including lifting hooks as required and as per specification & drawings.
Sq.M. 22
2.80
Supplying, fabricating and fixing in position in concrete or in masonry at any level, of length between 150 to 600 mm MS
flanged puddle pipes conforming to IS 1239 with puddle including one coat of primer on exposed surfaces all as per
specifications and as directed. (Flanges shall be flat face and shall be as per ANSI B 16.5 150 rating.)
(a) 25 mm dia. No. 50
(b) 50 mm dia. No. 25
(c) 75 mm dia. No. 15
(d) 100 mm dia. No. 10
2.90
Grouting pockets, holes, pipe sleeves of any shape or size for column bases, Machine foundations, etc. with cement mortar
1:2 with water cement ratio not more than 0.5 including roughening surface, cleaning with compressed air/ water jets,
ramming, curing, etc. complete.
Cu.M. 5
2.10Supplying & laying integral floor finish with 15 mm thk. layer of “Ironite” or equivalent on concrete floor. (using not less
than 2 kg of “Ironite” per sq.m).Sq.M. 25
2.11Supply & fixing of approved PVC water stops as indicated in drgs. Including all necessary splices etc. as per
manufacturer’s instructions, etc. complete.
(a) 150 mm ribbed type-min 10thk R.M. 28
(b) 225 mm ribbed type-min 10thk. R.M. 28
2.12
Supplying & Laying uncoursed random rubble mansonry wherever specified, with approved quality locally available hard
stone in cement mortar (1:5) including scaffolding, curing, raking of joints and flush/raised pointing in (1:3) cement mortar
etc. complete.
Cu.M. 480
Page 2 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
3.00 Road Works and Drains
3.10Supplying & Laying sand filter layer 225 mm thick including spreading and compacting to lines and levels as specified
using sand of classification D 85 < 4 D15, D2 > 2.5mm (D2 refers to sieve size permitting 2% by weight, etc.).Sq.M. 1500
3.20Supplying & laying soling course of finished thickness of 230 mm, packing with 80 mm metall, dry rolling, sprinkling
gravel, watering and rolling, etc. all complete as specified.Sq.M. 1500
3.30Supplying & Laying waterbound macadam course of compacted finished thickness of 100mm including dry rolling,
spreading and consolidation of screening and binding material all complete as specified.Sq.M. 300
3.40Supplying & laying Hammer dressed stone edging 150 x 250 mm with stones including excavation, refilling and disposal
of surplus earth within 30 m lead.R.M. 150
3.50 Supplying & Laying 50mm thk. Asphalt concrete macadam course as per specifications. Sq.M. 650
3.60 Supplying & Laying 25mm thick premix asphalt macadam including tack coat as per specifications. Sq.M. 650
3.70Supplying & Laying a seal coat of asphalt of grade 80/100 at 1.5 kg/sq.m. and spreading grit, brushing, rolling, etc.
complete as specified and as directed.Sq.M. 650
3.80
Supplying & Laying reinforced concrete road with thickness as specified in the specification with or without water
proofing compound excluding reinforcement but including formwork, with coarse aggregate of sizes 20 mm downgraded
as directed by Engineer including vibrating, curing, etc. complete. (Rate to be inclusive of supply of all necessary material,
laying in position as per specifications and shall include mixing of water-proofing compound where-ever directed by
Engineer.)
Cu.M. 25
3.90Supplying, & Laying, jointing, hydraulically testing NP2 class cement concrete pipes conforming to IS:458 for cable
crossing etc. (Pipe shall have collar joint sealed in C.M. 1:2).
(a) 150 mm dia. R.M. 15
(b) 300 mm dia. R.M. 15
(c) 450 mm dia. R.M. 15
(d) 600 mm dia. R.M. 15
(e) 900 mm dia. R.M. 15
3.10Supplying, & Laying, jointing, hydraulically testing NP3 class cement concrete pipes conforming to IS:458 for cable
crossing etc. (pipe shall have collar joint sealed in C.M. 1:2).
(a) 150 mm dia. R.M. 15
(b) 300 mm dia. R.M. 15
(c) 450 mm dia. R.M. 15
(d) 600 mm dia. R.M. 15
(e) 900 mm dia. R.M. 15
Page 3 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
3.11
Supplying, laying & fixing G.I. pipes of Class ‘C’ ( unit price to be inclusive of necessary heavy class GI fitting such as
tees, bends, unions, elbows, reducers, sockets, flanges, check nuts, plug ends, etc. ) in vertical or horizontal position at all
heights, including cutting, threading, bending and jointing, cutting holes in the walls or floors and making good the same
with cement mortar 1:4, trenching, refilling , sand bedding, providing necessary G.I. malleable clamps and supports and
testing the line as specified complete.
(a) 100 mm dia. R.M. 800
(b) 50 mm dia. R.M. 40
(c) 32 mm dia. R.M. 20
(d) 25 mm dia. R.M. 20
4.00 Building and Miscellaneous Works
Supplying & laying of Brick masonry in super structure in cement mortar 1:6 (1 cement : 6 coarse sand ) using approved
quality country bricks including scaffolding, curing, raking of joints, etc. as specified for walls, etc. at all levels.
i. 115 mm thick including placing chicken mesh at every 4th layer. Sq.M. 25
ii. same as item No.4.1(i) above but in C.M. 1:4. Sq.M. 5
iii. 230 mm thick and above. Cu.M. 10
4.20 Same as in item No.4.1 but for brick masonry in cement mortar 1:6 in foundations and in plinth.
(a) 230 mm thick and above. Cu.M. 8
4.30
Supply, Providing & laying hammer dressed RRM with approved quality locally available hard stone in cement mortar
(1:5) including scaffolding, curing, raking of joints and flush/raised pointing in (1:3) cement mortar etc. complete.for
boundary wall as per specification, drawings and as directed by Engineer. ( including supply & fixing in position 11nos of
barbed wire and concertina coil of 700mm dia., 80 nos of circles per running meter. Clips hot dip galvanised. The wire
shall be of 12SWG Tensile wire, covering 10RM with one coil, each RM will have 8 nos. of circles etc.).
R.M. 320
Providing & Laying Interior plain faced cement plaster in C.M. 1:6 with neeroo finish on all types of surfaces specified in
drawings at all levels. The rates shall also include moulding wherever specified, scaffolding, curing, etc.
(a) 12 mm thick on brick walls and concrete surfaces. Sq.M. 50
(b) 6 mm thick on underside of slabs. Sq.M. 50
Providing & Laying 20 mm thick exterior cement plaster in C.M. 1:3 in two layers, with first layer of 14mm thickness, and
second layer of 6mm thickness, using sand of approved quality, size and shape and including providing bands, grooves,
drip moulds, and including scaffolding, curing, etc. complete at all levels.
(a) Sand faced plaster including grooves in plaster. Sq.M. 50
(b) Plain sand faced plaster. Sq.M. 50
4.60Supply of 230 mm thick rubble packing under floor with approved hard stone, set in regular lines, hand packed, filling the
interstices with small stone chips and sand with approved hard stone obtained from borrow pits outside owner’s boundary.Sq.M. 30
4.40
4.50
4.10
Page 4 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
Supplying and fixing approved quality premoulded bituminous joint filter as per IS:1838 wherever specified.
a) 12 mm thick Sq.M. 20
b) 25 mm thick Sq.M. 20
4.80Supplying and filling in place bituminous sealing compound conforming to IS:1834 in grooves 25 mm x 25 mm over joints.
R.M. 20
4.90
Supplying and fixing the chain link fencing of 2.0m high above finished grade level, 50 x 50 mm mesh with 3.15 mm dia.
GI Wire. The chain link shall be clamped to angle posts ISA 65 x 65 x 6 at spacing not exceeding 2.5m by MS flat 50x6
with 16mm diameter bolt with flat washers.The foundation shall be anchored in 1:3:6 PCC block of size 350mm x 350mm
x 600mm deep, including providing of braced bays at corners and every tenth bay with angle ISA 75x75x6 diagonal
bracing one 4mm diameter galvanised MS line wires at top and bottom including erection, painting over approved primer
cost, etc. complete as per details indicated in the drawings.
Sq.M. 200
4.10
Providing & Fixing in place 1000 litres capacity SINTEX or equivalent high density polyethylene cylindrical vertical water
tank on roof, with closed top including all GI fixtures and fittings for 25 mm Inlet, 25mm outlet, 25mm overflow, 50mm
scour connection and PVC float valve complete.
No. 2
4.11
Supply, Design, fabricate, transport to site and erect in position electrically operated sliding gate made out of hollow
rectangular MS pipes complete with drive unit having 3 phase motor and gear arrangement, electric control panel, limit
switches and arrangement for manual operation, as per standard supply including all necessary fixtures, etc. complete. Rate
shall include all inserts and embedments essential for smooth operation of the gate. The rate shall also include for 3 coats
of enamel painting of approved brand and shade after erection over 2 coats of red oxide zinc chromate primer.
Sq.M. 30
4.12Supply & Fixing of 140 mm dia. HDPE pipes PE 63 grade with pressure rating of PN 2.5 conforming to IS:4984 for cables
at road/pavement crossings as per drawing.R.M. 25
4.13Supply & Fixing of 110 mm dia. HDPE pipes PE 63 grade with pressure rating of PN 2.5 conforming to IS:4984 for
weeps holes in the walls. as per drawing.R.M. 50
4.14
Supplying, Fabricating and erecting M.S. gates consisting of M.S. angle framework (Internal) and 25 mm dia. G.I. pipe
external frame work using ISA 50x50x6 with 6mm thick MS joining plates including chain link stretched and tack welded
over the framework with necessary hinges, locking arrangement including applying one coat of red oxide paint to all
exposed surfaces of steel. Contractor shall arrange for all the materials, tools, labour, etc. required to complete the job.
Sq.M. 50
4.70
Page 5 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
5.0 Building Works
A. EARTH WORKS
1.00Excavation in foundation trenches or drains, for all width<1.5m & area 10sqm in plan, incl. dressing & ramming, disposal
of surplus soil for all lead & lift -All kinds of Soil for footings and wall footings etc.
1.10 All kinds of soil. Cu.M 404
1.20 Ordinary rock with or without blasting. Cu.M 106
2.00
Hand excavation and refilling in layers < 200 mm, of trenches for pipes incl. dressing of sides/ ramming of bottom, depth
up to 1.5m, disposal of surplus materials within lead of 50 m. ( For external water supply pipes & waste pipes) - All kinds
of soil for pipes(80 mm< dia < 300 mm).
M 715
3.00Filling of trenches, sides of foundations etc. in layers < 200 mm using selected excavated earth, ramming etc. within lead
50 m & lift 1.5 m.Cu.M 415
B. STEEL WORKS
4.00Providing & fixing cold twisted deformed bar (Fe500) for R.C.C work incl. cutting, bending, binding & placing in position
complete, in footings, columns, beams, slabs, lintels, cornices and props etc.Kg 60812
5.00 Providing and fixing stainless steel staircase handrails, balustrades, horzontal pipes etc, complete as per the drawings. Set 1
C. P.C.C & R.C.C WORKS
6.00Providing & laying Cement concrete 1:4:8, 40 mm agg., excluding the cost of centering & shuttering-in foundation and
plinth- All works uptp plinth levels.Cu.M 37
7.00Providing & laying R.C.C 1:1.5:3, 20 mm agg. excluding the cost of formwork & reinforcement cost in- foundation pads,
bases of columns below plinth, plinth beams, etc, complete. Cu.M 150
8.00Providing & laying R.C.C 1:1.5:3, 20 mm agg. excluding the cost of formwork & reinforcement cost for- Columns above
plinth beams, props, etc complete.Cu.M 50
9.00Providing & laying R.C.C 1:1.5:3, 20 mm agg. excluding p&f the cost of formwork & excluding reinforcement cost for -
First floor slab, roof slab, prorch, landings of staircase, etc complete.Cu.M 68
10.00Providing & laying R.C.C 1:1.5:3, 20 mm agg. excluding the cost of formwork & reinforcement cost for - floor beams,
lintels, staircases, etc. Cu.M 105
Page 6 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
11.00
Providing & laying traditional R.C.C Cornices in 1:1.5:3, 20 mm agg. including cost of formwork including finishing with
6mm thick plaster on the exposed surface with cement mortar 1:3, excluding reinforcement & decorative painting cost as
per standard design/drawings furnished (Meas. to be along the cornice and wall junction).
11.10 Multi-storied building at floor 2 level including the cost of lhanglag and at other floors where lhanglag is provided. M 27
11.20 Phana at roof level cornice. M 83
11.30 Lintel cornice (only cornice portion at external face). M 229
12.00
Providing & laying water tank for fire fighting system including RCC, 1:1:2, 20 mm agg. with water proofing compound,
the cost of formwork, reinforcement, pipes, water stoppers, valves, water level indicators etc, complete as per specification
and drawings in accordance to IS:3370.
Each 1
D. FORM WORKS
13.00 Providing & fixing centering and shuttering (formwork), including strutting, propping etc. and removal of formwork.
13.10 Foundations and plinths. Sq.M 630
13.20 Beams and lintels. Sq.M 740
13.30 Columns above plinth upto props. Sq.M 460
13.40 Staircase excluding landing. Sq.M 13
13.50 Slabs including landings of staircase. Sq.M 302
E. STONE/BRICKWORK
14.00 Providing & laying Hand packed stone filling/soling (under flooring footings and retaining walls). Cu.M 118
15.00 Providing & laying Random Rubble Masonry with hard stone in foundation & plinth - In CM 1:5 under plinth beams. Cu.M 60
16.00 Providing & laying 250 mm Cement Concrete Block in superstructure (upto floor 2 level ) as external infill- In CM 1:4. Cu.M 187
17.00 Providing & laying 125 mm Cement Concrete Block in superstructure (upto floor 2 level ) as internal infill- In CM 1:4. Sq.M 28
F. PLASTERING
19.00 Providing & laying 6 mm cement plaster (in ceilings) in cement mortar 1:4. Sq.M 193
20.00Providing & laying 12 mm cement plaster on rough side of single or half -brick wall - C.M 1:4 (Internal walls above plinth
including exposed portion of beams and columns).Sq.M 115
21.00 Providing & laying 20 mm cement plaster - C.M 1:4 (External walls Above plinth). Sq.M 664
22.00 Providing & laying cement plaster, finished with floating coat of neat cement - 20 mm plaster in C.M 1:4 in plinth walls. Sq.M 102
23.00Providing & applying plaster of paris putty 12 mm thickness over plastered surface to prepare the surface even and smooth
complete.Sq.M 133
Page 7 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
G. FLOORING
24.00 Providing and laying sand bedding, including watering, ramming, dressing , etc in ground floor. Cu.M 25
25.00 Providing and laying 2.5 mm thk. Bitumen sheet in floors of ground floor and under walls. Sq.M 454
26.00Providing and laying in position plain cement concrete 1:3:6, 20 mm aggregate excluding the cost of centering and
shuttering in floors of ground floor - 100 mm thk.(All work up to plinth level).Cu.M 45
27.00 Providing and laying cement concrete flooring 1:2:4 finished with floating coat of neat cement. Sq.M 260
28.00Providing & laying Epoxy Flooring in ground floor vertified and polished - in white cement as per the drawings and
specifications (FF1)- Shades to be choose by Client.Sq.M 245
29.00Providing & laying 150 mm Epoxy skirting in ground floor vertified and polished - in white cement as per the drawings
and specifications (FF1).M 49
30.00Providing & laying anti-acid floor tiles in Battery Room, 25 mm thick, vetrified and polished- in white cement as specified
in architectural drawings (FF2).Sq.M 31
31.00Providing & laying 150 mm anti-acid skirting tiles in Battery Room, 25 mm thick, vetrified and polished- in white ceemnt
as specified in architectural drawings (FF2).M 23
32.00Providing & laying anti-acid wall tiles in Battery Room, 25 mm thick, vetrified and polished up to 2.1 m height from
finished floor levels - in white ceemnt as specified in architectural drawings (WT3).Sq.M 48
33.00Providing & laying terrazo floor tiles, 25 mm thick, vetrified and polished- in grey cement as specified in architectural
drawings (FF3).Sq.M 94
34.00Providing & laying 150 mm terrazo skirting tiles, 25 mm thick, vetrified and polished- in grey cement as specified in
architectural drawings (FF3).M 88
35.00Providing & laying granite floor tiles, 25 mm thick, vetrified and polished in landings and tread risers of staircase in grey
cement as specified in architectural drawings (FF4).Sq.M 14
36.00Providing & laying 150mm granite skirting tiles, 25 mm thick, vetrified and polished in staircase in grey ceemnt as
specified in architectural drawings (FF4).M 10
37.00Providing & laying anti-skid terrazo floor tiles, 25 mm thick, vetrified and polished in washrooms in grey cement as
specified in architectural drawings (FF5).Sq.M 16
38.00Providing & laying 150mm anti-skid terrazo skirting tiles, 25 mm thick, vetrified and polished in washrooms in grey
cement as specified in architectural drawings (FF5).M 38
39.00Providing & laying ceramic wall tiles, 25 mm thick, vetrified and polished in washrooms walls up to 2.1 m height from
finished floor levels in white cement as specified in architectural drawings (WT1).Sq.M 79
Page 8 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
40.00Providing & laying ceramic wall tiles, 25 mm thick, vetrified and polished in pantry walls up to 2.1 m height from finished
floor levels in white cement as specified in architectural drawings (WT2).Sq.M 15
41.00Providing & laying granite -counter top in tiles, 25 mm thick, vetrified and polished in washrooms basins and pantry
counter in white cement as specified in architectural drawings (FF7).Sq.M 3
42.00
Providing and laying False Flooring, 600x600x40mm thick square modualr panel with 38 mm High Density E1 chipboard
core strengthened with high performance thermosetting resins. Including substructure- heavy duty pedastal assembly &
stringers, anti static, anti-vibrational, all steel components epoxy caoted, fire rating confirming to BS 476 Part 6 & &,
Electrical resistivity as ASTM F150/NFPA 99/ANSI S7.1/CEI 61340, etc, complete. Substructure installed to support
panel shall b e suitable to achieve a minimum finished floor height of 600mm from existing floor level. The Engineer In-
charge shall choose suitable brands or equivalent to UNITILE UCBLA 38 SERIES, etc.
Sq.M 99
H. WINDOWS AND DOOR WOOKS Sq.M
43.00Providing & fixing pelmet 100 mm x 12 mm, with 25 mm dia. wooden curtain rod & brackets including M.S.flats
25x3x100 mm & plugs etc. complete - Mixed Conifer.Sq.M 81
44.00Providing & fixing anodised Aluminium doors, including all accessories such as U-rubber gasket for fixing glass panes,
weather strips or weather seals, roller, springs, glass panes, etc complete as per the drawings.M
44.10 Control room building
44.1.1 D0 Each 1
44.1.2 D1 Each 1
44.1.3 D2 Each 1
44.1.4 D3 Each 3
44.1.5 SD1 Each 1
44.1.6 SD2 Each 2
44.1.7 RS Each 1
44.20 Pump house
44.2.1 D1 Each 1
44.2.2 RS Each 1
44.30 Store shed
44.3.1 D1 Each 2
44.3.2 RS Each 1
44.40 Security Guard room
44.4.1 D1 Each 1
44.4.2 D2 Each 2
Page 9 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
45.00
Providing, making and fixing in position of timber Doors Components including frames, security bars (if any),brass tower
bolt 150 mm,brass handle 150 mm,brass hinges 250 mm,brass sliding bolts 250 mm and applying wood preservative on
unexposed surface and painting, all necessary hardwares (holdfast complete, bolts, screws etc.) as applicable and as per the
design drawing and specification.
45.10 D4 Each 5
45.20 D5 Each 3
46.00
Providing & fixing anodised Aluminium windows including all accessories such as U-rubber gasket for fixing glass panes,
weather strips or weather seals, roller, springs,glass panes, steel frames, hold fast, etc complete as per
the drawings / technical specification.
46.10 Control room building Each
46.1.1 W1 Each 21
46.1.2 W2 Each 5
46.1.3 WK Each 1
46.1.4 V1 Each 4
46.20 Pump house
46.2.1 W1 Each 4
46.30 Store shed
46.3.1 W1 Each 11
46.40 Security Guard room
46.4.1 W1 Each 1
46.4.2 W2 Each 2
46.4.3 V1 Each 2
I. PARTITION AND FALSE FLOORING
47.00Providing & fixing anodised Aluminium partitions framing of specified sections including all accessories such as U-rubber
gasket for fixing glass panes, weather strips or weather seals, roller, springs, 8mm thick prelaminated boards, etc complete.Sq.M 23
48.00 Providing & fixing TRAC-84C false ceiling as per the techincal specifications, complete. Sq.M 99
J. ROOFING
49.00Providing and fixing PPGI tropical deep green roof sheeting, including bolts,hooks,and nuts 8 mm dia. With bitumen and
G.I limpet washers filled with white lead for connection, etc, excluding the cost of purlins,struts, rafters and trusses.-24G.Sq.M 934
50.00Providing and fixing 600 mm ridges or hips in PPGI roof sheeting including bolts, hooks, and nuts 8mm dia. With bitumen
and G.I limpet washers filled with white lead for connection. M 140
51.00Steel work welded, in built up sections, trusses, frameworks including cutting, hoisting, fixing and appl. Priming coat of
red lead paint. in tubular sections.Kg 15560
52.00 Providing and fixing MS round hold-down bolts with nuts and washer plates, complete in all areas. Kg 625
Page 10 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
53.00 Providing & fixing bolts and expansion bolts (wherever necessary) of various sizes including nuts & washers. Kg 680
54.00 Providing, making and fixing, M.S plates all thickness complete in roof truss work. Kg 813
55.00Providing and fixing 450 mm over all semi-circular PVC gutter, including brackets, bolts, nuts, washers and rain water
pipes connections, exlcluding the cost of pipes - 24g sheets.Kg 202
56.00Providing and fixing on wall face single socketed rigid PVC (working pressure 4kgf per sq.cm) rain water pipes including
jointing with seal ring leaving 10 mm gap for thermal expansion - complete - 110 mmM 55
57.00Providing and fixing on the wall face PVC coupler for rigid rain water pipes including jointing with seal ring leaving
10 mm gap for thermal expansion - complete - 110 mm.M 50
58.00Providing and fixing on the wall face PVC bend for rigid rain waer pipes including jointing with seal ring leaving 10 mm
gap for thermal expansion - complete - 110 mm.M 19
59.00 Providing, making and fixing M.S. straps, flats, sole plates etc in eaves board of 225x2 mm M.S flats in roof. M 37
K. PLUMBING WORKS
60.00 Providing & fixing PVC pipes incl. PVC fittings & clamps & repair walls - 20 mm internal piping. M 35
61.00 Providing & fixing PVC pipes incl. PVC fittings & clamps & repair walls - 25 mm external piping. M 20
62.00 Providing & fixing PVC pipes incl. PVC fittings & clamps & repair walls - 40 mm external piping (excluding trenching). M 425
63.00 Providing & fixing 600 x 450 mm bevelled edge mirror (superior glass) incl.4mm A.C sheet base fixed to wooden cleats. M 5
64.00 Providing & fixing c.p. towel rail 600 x 20 mm with c.p brass brackets fixed to wooden cleats. Each 4
65.00 Providing & fixing soap dish including brackets, wooden cleats, c.p. brass screws. Each 5
66.00 Providing & fixing soap dispenser including brackets, wooden cleats, c.p. brass screws. Each 5
67.00 Providing & fixing c.p brass bibcock - 15 mm standard vertical, c.p knob. Each 5
68.00 Providing & fixing pedestals for basins, white vit.china, recessed back for pipes & necessary fittings. Each 5
69.00
Providing and fixing flat back 550 x 400 mm wash basin with single 15 mm c.p brass pillar, including C.I brackets, 15 mm
C.P brass pillar taps, C.P chain and rubber plug 32 mm pvc waste, 32 mm dia trap & union, repair walls. (Note: Approval
for the brand have to be sought from the employer before the purchase of the items.)
Each 5
70.00Providing and fixing kitchen sink including all connections, fittings and repairs to walls, etc, stainless steel 580 x 480 x 175
mm single bowl.Each 1
71.00 Providing & fixing C.P Brass shower fittings with revolving joint, 15 mm. Each 2
Page 11 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
72.00Providing & fixing European‐type vitreous china w.c pedestal including seat and lid with c.p brass hinges, 15 lit white
vitreous china low level cistern, fittings, brackets, repair walls.Each 5
73.00 Providing & fixing toilet paper holder - Recessed ceramic, roll-type, 150 x 150 mm. Each 5
74.00 Providing & fixing plastic tank including all accessories complete - 2000 litre capacity. Each 2
75.00 Providing & fixing plastic tank including all accessories complete - 3000 litre capacity. Each 2
76.00 P & f P.V.C Nahani Trap - 110 mm inlet & 75 mm outlet. Each 10
77.00 Providing & fixing brass stop cock - 25 mm ( At junction-External). Each 5
78.00Providing & fixing P.V.C soil and vent pipes, single or double socketed, including pipe clip complete (excluding the cost of
PVC fittings)-110 mm dia.M 26
79.00 Providing & fixing P.V.C Coupler -110 mm dia. Each 13
80.00 Providing & fixing P.V.C Coupler -75 mm dia. Each 13
81.00 Providing & fixing P.V.C door bend - 75 mm dia. Each 9
82.00Providing & laying H.D.P.E pipes, pressure class 10kg/sq.m, including H.D.P.E fittings (excluding trenching, refilling &
thrust block), 75 mm.Each 16
83.00Providing & laying H.D.P.E pipes including H.D.P.E fittings pressure class 6kg/sq.cm(excluding trenching, refilling &
thrust block) -- 110 mm dia.Each 41
84.00 Constructing Soak Pit filled with brick bats including 100 mm S.W drain-pipe - As per the drawing. Each 2
85.00
Constructing Septic Tanks, in 2nd class brick masonry in cement mortar 1:4, including fittings, C.I cover with frame, 40
mm thick concrete flooring (40 mm aggregates) cement plaster concrete base in C.M 1:4:8 etc. complete as per standard
design - 50 users.
Each 1
86.00
Constructing Septic Tanks, in 2nd class brick masonry in cement mortar 1:4, including fittings, C.I cover with frame, 40
mm thick concrete flooring (40 mm aggregates) cement plaster concrete base in C.M 1:4:8 etc. complete as per standard
design - 15 users.
Each 1
L. DRAINAGE WORKS
87.00Providing and laying plinth protection 50 mm thk. complete including finishing the top surface smooth - with cement
concrete 1:3:6, 20 mm aggregate, laid over 100 mm thick layer of compacted gravel (40 mm).Sq.M 286
88.00
Construction of second class brick masonry open surface drain in cement mortar 1:4 including earth work in excavation
100mm thick concrete bed 1:5:10, 40 mm aggregate and 25 mm thick cement concrete 1:2:4, 12mm aggregate for filling
haunches including 12 mm cement plastering 1:4 with a floating coat of neat cement and disposal of surplus earth etc.
complete- 250 x 200 mm depth.
M 255
89.00
Const. Brick masonry manhole in CM 1:5, R.C.C top slab with 1:2:4 20 mm agg., fdn. PCC 1:4:8 40 mm agg.12mm
CP 1:3 finished with floating coat & making channels in PCC 1:2:4., 20 mm agg. neatly finished complete - as per the
drawing.
Each 5
90.00
Const. Brick masonry inspection chamber in CM 1:5, R.C.C top slab with 1:2:4 20mm agg., fdn. PCC 1:4:8 40mm
agg.12mm CP 1:3 finished with floating coat & making channels in PCC 1:2:4., 20mm agg. neatly finished complete - as
per the drawing.
Each 3
Page 12 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Item Description Erection Price Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT CHANGIDAPHU,THIMPHU
Unit
M. PAINTING
91.00Providing and applying one coat of primers of approved color and texture by the client on the eave board and eave ceiling -
pink primer.Sq.M 399
92.00Providing and applying two coats of synthetic enamel paint of approved color and texture by the client on eave board and
ceiling.Sq.M 399
93.00 Providing & applying one coat of primers ( on external wall surface) -Cement primer. Sq.M 385
94.00 Finishing wall with Water- Proof Cement Paint - New work, three coats ( on external wall surface). Sq.M 385
95.00Providing & applying finishing coats - Acrylic washable distemper, two coats on new work, including cement primer coat -
internal walls.Sq.M 318
96.00Providing, preparing and applying Sumdang Traditional Bhutanese painting (Washable) - Ding quality. (Rate quoted
should be able to cover the cost of applying paints to all the cornices, external window portions, etc.)Sq.M 773
N. FURNITURES
97.00 Control room
97.10 Arch Table for control room Each 3
97.20 Rotating chair Each 4
98.00 General office/record room
98.10 File rack Each 2
98.20 Medium Office working table consisting of : 1 office working table, 1 drawer cabinet, 1 side extension table Each 1
98.30 Executive rotating chair Each 1
98.40 Chair with arm rest with fabric Each 3
98.50 Writiing table Each 3
98.60 Rotating chair Each 2
99.00 Guest room
99.10 Medium size beds with Mattress, pillows, quilts, etc Each 2
99.20 Wooden cupborads Each 2
99.30 TV set - 32 inch LED (Sony, Samsung) Set 1
99.40 Easy sofa double seater set consisting of one number double seater and two numbers single seater Set 1
99.50 Center table Each 1
99.60 TV cabinet simple with one drawer Each 1
99.70 Fridge (single deck), equivalent to 190 litres. Make to be approved by BPC Each 1
99.80 Rice cooker, Curry cooker and Water boiler. Make to be approved by BPC Set 1
99.90 Micro wave oven. Make to be approved by BPC. Each 1
99.10 Plate and cups set each 1
99.11 Dining table 4 Seater No. 1
99.12 Chair for dining table No. 4
Total Amount (Nu.)
Page 13 of 13
1 Supply and delivery of Equipment
2 Erection works
3 Testing and commissioning including design of Aux.systems.
4 Supply and delivery of Spares and special tools
6 Earth works
7 Supply of structural steel and reinforcement steel works
8 Supply and erection
2 X 5 MVA, 66/33 KV INDOOR GIS SUBSTATION INCLUDING ALL OTHER ASSOCIATED WORKS AT DAMJI IN GASA
DZONGKHAG AS PACKAGE 'B'
SN DESCRIPTION Total Price(Nu)
TOTAL
0. SUMMARY SHEET
Summary
Amount in Nu
Ex-Work CIF (Site)
1 2 3 4 = 1 x 3 5 6 7 = 1 x 2 x 5 8 = 1 x 2 x 6 9 = 4 + 7 + 8
1.0 POWER TRANSFORMER
1.1 5MVA, 66/33kV, Power transformer including
RTCCSet 2
2.0 GIS EQUIPMENT
2.1 66kV GIS transformer feeder bay (1250A, 20kA) Bay 2
2.3 66kV GIS line feeder (1250A, 20kA) Bay 2
2.4 66kV GIS Voltage Transformer (3phase, 1250A,
40kA)Bay 2
2.5 66kV GIS Bus Sectionaliser breaker (1250A, 20kA)Bay 1
3.0 CONTROL AND RELAY PANEL
3.1 66kV line feeder No 2
3.2 66kV transformer feeder No 2
3.3 Bus Section No 1
4.0 LIGHTNING ARRESTER
4.1 60kV Set 2
5.0 SUBSTATION AUTOMATION
SYSTEMS/SCADA
Unit RateBST
Total Including
Taxes
TURNKEY PACKAGE FOR DESIGN, SUPPLY, CONSTRUCTION, ERECTION, TESTING & COMMISSIONING OF 2 X 5 MVA, 66/33 KV INDOOR GIS SUBSTATION INCLUDING ALL
OTHER ASSOCIATED WORKS AT DAMJI IN GASA DZONGKHAG
1. SCHEDULE OF SUPPLY & DELIVERY
Item Description UnitProv.
Quantity
CD/
Taxes
Total Excluding
CD and BST
CD/Tax
AmountBST Amount
SYSTEMS/SCADA
5.1Complete Substation Automation
Systems(SAS)/SCADA) and Accessories. All the
required data should report to NLDC, Thimphu.
Lot 1
6.0 33kV Gas Insulated Switchgear
6.1 Incomer Panel, 1250A with all digital meters,
numerical relays, CT , PT & etc.No 2
6.233kV outgoing feeder panels,1250A with all digital
meters, numerical relays, CT , & etc.(refer SLD)No 4
6.3 33kV outgoing Feeders panels, 1250A with all
digital meters, numerical relays, CT, PT & etc. No 2
6.4 33kV Bus Coupler panel, 1250A with all digital
meters, numerical relays, CT, PT & etc.No 1
Schedule 1/Supply of Equipment/Page 1 of 4
Amount in Nu
Ex-Work CIF (Site)
1 2 3 4 = 1 x 3 5 6 7 = 1 x 2 x 5 8 = 1 x 2 x 6 9 = 4 + 7 + 8
Unit RateBST
Total Including
Taxes
TURNKEY PACKAGE FOR DESIGN, SUPPLY, CONSTRUCTION, ERECTION, TESTING & COMMISSIONING OF 2 X 5 MVA, 66/33 KV INDOOR GIS SUBSTATION INCLUDING ALL
OTHER ASSOCIATED WORKS AT DAMJI IN GASA DZONGKHAG
1. SCHEDULE OF SUPPLY & DELIVERY
Item Description UnitProv.
Quantity
CD/
Taxes
Total Excluding
CD and BST
CD/Tax
AmountBST Amount
7.0 STATION TRANSFORMER
7.1 250kVA, 33/0.415kV, Station transformer No 2
8.0 POWER AND CONTROL CABLES
8.1 Single Phase 66kV, 630sq.mm cable including end
terminations and sealing.
8.1(a) from 66 kV Gantry (outdoor)to 66kV GIS
equipment (indoor)1
8.1(b) from 66kV GIS equipment (indoor)to primary of
2x5MVA, 66/33kV Transformer (outdoor)1
8.2Single Phase 33kV, 630 sq.mm cables including end
terminations from secondary of 2x5MVA, 66/33kV
power transformers to 33kV GIS panels
Lot 1
8.3 33kV, 3Cx300 sq. mm., XLPE, Aluminium, earthed
grade Cable alongwith associated termination &
accessories from 33kV Switchgear to Lattice
Structure
Lot 1
8.4 3cx 70 sq.mm, XLPE Al. Cable from 33kV GIS
Lot
8.4 3cx 70 sq.mm, XLPE Al. Cable from 33kV GIS
panel to two station transformers including end
termination.
Lot 1
8.5 1.1kV Power and Control Cables for the entire
substation including 20% for spareLot 1
9.0 CABLING EQUIPMENT
9.1 All accessories for switchyard such as cable trays,
racks, conduits, bends, tees, junction boxes, etc. for
the entire cabling system including all accessoriesLot 1
10.0 OUTDOOR LIGHTING
10.1 Complete outdoor lighting system with LED for
substation area including access road with complete
accessories, lighting panels etc.
Lot 1
Schedule 1/Supply of Equipment/Page 2 of 4
Amount in Nu
Ex-Work CIF (Site)
1 2 3 4 = 1 x 3 5 6 7 = 1 x 2 x 5 8 = 1 x 2 x 6 9 = 4 + 7 + 8
Unit RateBST
Total Including
Taxes
TURNKEY PACKAGE FOR DESIGN, SUPPLY, CONSTRUCTION, ERECTION, TESTING & COMMISSIONING OF 2 X 5 MVA, 66/33 KV INDOOR GIS SUBSTATION INCLUDING ALL
OTHER ASSOCIATED WORKS AT DAMJI IN GASA DZONGKHAG
1. SCHEDULE OF SUPPLY & DELIVERY
Item Description UnitProv.
Quantity
CD/
Taxes
Total Excluding
CD and BST
CD/Tax
AmountBST Amount
11.0 INDOOR LIGHTING
11.1 Complete indoor lighting system with LED
including all lighting panels & complete accessories. Lot 1
12.0 EARTHING & LIGHTNING PROTECTION
12.1 Earthing and lightning protection systems for
switchyard complete with earth grid and mat, earth
leads, electrodes, shield wire, clamps and connectors
and all other hardware & accessories
Lot 1
13.0 BATTERY& BATTERY CHARGER
13.1 110V DC Battery and Battery charger Set 2
14.0 DISTRIBUTION BOARDS
14.1 AC Distribution board Set 2
14.2 DC Distribution board Set 2
15.0 FIRE FIGHTING SYSTEMS
15.1 Fire Fighting Equipment and Fire Fighting System
including Emulsifier System for Power
Transformers (2Nos. power transformers)
Lot 1
16.0 FIRE ALARM & DETECTION SYSTEM
16.1 Complete fire alarm and detection system as per
technical specificationsLot 1
17.0 SURVILANCE AND SECURITY SYSTEMS
17.1 Complete CCTV systems along with complete
accessoriesLot 1
Schedule 1/Supply of Equipment/Page 3 of 4
Amount in Nu
Ex-Work CIF (Site)
1 2 3 4 = 1 x 3 5 6 7 = 1 x 2 x 5 8 = 1 x 2 x 6 9 = 4 + 7 + 8
Unit RateBST
Total Including
Taxes
TURNKEY PACKAGE FOR DESIGN, SUPPLY, CONSTRUCTION, ERECTION, TESTING & COMMISSIONING OF 2 X 5 MVA, 66/33 KV INDOOR GIS SUBSTATION INCLUDING ALL
OTHER ASSOCIATED WORKS AT DAMJI IN GASA DZONGKHAG
1. SCHEDULE OF SUPPLY & DELIVERY
Item Description UnitProv.
Quantity
CD/
Taxes
Total Excluding
CD and BST
CD/Tax
AmountBST Amount
18.0 EPABX SYSTEM
18.1Complete EPABX system suitable for optic fibre
communication along with all accessories.LOT 1
19.0 FIBRE OPTIC CABLE
19.1
1310 nm, Monomode Underground Armoured Fibre
Optic approach cable, Joint Boxes,Pigtails, clamps
& any other required accessories
LOT 1
20.0 DIESEL GENERATOR(DG) SET
20.1Diesel generator set, 50 kVA, 415V along with
control panel and required accessoriesNo. 1
21.0 33kV LATTICE STRUCTURE
33 kV out going feeders Lattice structure inclusive
of all items like Lightning Arresters, Isolators with
earth blade, insulators, hardware accessories
complete
Set 4
22.0 EOT CRANE
EOT crane of 5T capacity suitable to operate as
22.1
EOT crane of 5T capacity suitable to operate as
and when required, complete with all
accessories and slings as detailed in the
specifications.
22.22x13 m Runway rails of suitable size complete
in all respect including fixing at site.
22.3Complete trolley runway with conductors,
fixtures, insulations etc. as per Clauses.
22.4All consumables for site assembly & erection
etc.
G-TOTAL
Schedule 1/Supply of Equipment/Page 4 of 4
1 2 3 = 1 x 2
1.0 POWER TRANSFORMER
1.1 5MVA, 66/33kV, Power transformer including RTCC Set 2
2.0 GIS EQUIPMENT
2.1 66kV GIS transformer feeder bay (1250A, 20kA) Bay 2
2.2 66kV GIS line feeder (1250A, 20kA) Bay 2
2.3 66kV GIS Voltage Transformer (3phase, 1250A, 20kA) Bay 1
2.4 66kV GIS Bus Coupler breaker (1250A, 20kA) Bay 1
3.0 CONTROL AND RELAY PANEL
3.1 66kV line feeder No 2
3.2 66kV transformer feeder No 2
3.3 Bus Section No 1
2. SCHEDULE OF ERECTION
ItemDescription
Unit Prov. Quantity Unit Price Total
TURNKEY PACKAGE FOR DESIGN, SUPPLY, CONSTRUCTION, ERECTION, TESTING & COMMISSIONING OF 2 X 5 MVA, 66/33 KV INDOOR GIS SUBSTATION
INCLUDING ALL OTHER ASSOCIATED WORKS AT DAMJI IN GASA DZONGKHAG
3.3 Bus Section No 1
4.0 LIGHTNING ARRESTER
4.1 60kV Set 2
5.0 SUBSTATION AUTOMATION SYSTEMS/SCADA
5.1 Complete Substation Automation Systems(SAS)/SCADA) and Accessories. All the required
data should report to NLDC, Thimphu.Lot 1
6.0 33kV GIS Panel
6.1 Incomer Panel, 1250A with all digital meters, numerical relays, CT , PT & etc. No 2
6.2 33kV outgoing feeder panels,1250A with all digital meters, numerical relays, CT , &
etc.(refer SLD)No 4
6.3 33kV outgoing Feeders panels, 1250A with all digital meters, numerical relays, CT, PT &
etc. No 2
6.433kV Bus Coupler panel, 1250A with all digital meters, numerical relays, CT, PT & etc. No 1
Schedule 2/Erection/Page 1 of 3
1 2 3 = 1 x 2
ItemDescription
Unit Prov. Quantity Unit Price Total
7.0 STATION SERVICE TRANSFORMER
7.1 250kVA, 33/0.415kV, Station transformer No 2
8.0 POWER AND CONTROL CABLES
8.1 Single Phase 66kV, 630sq.mm cable including end terminations
8.1(a) from 66 kV Gantry (outdoor)to 66kV GIS equipment (indoor)
8.1(b) from 66kV GIS equipment (indoor)to primary of 2x5MVA, 66/33kV Transformer
(outdoor)
8.2 Single Phase 33kV, 630 sq.mm cables including end terminations from secondary of
2x5MVA, 66/33kV power transformers to 33kV GIS panelsLot 1
8.3 33kV, 3Cx300 sq. mm., XLPE, Aluminium, earthed grade Cable alongwith associated
termination & accessories from 33kV Switchgear to Lattice Structure
8.4 3cx 70 sq.mm, XLPE Al. Cable from 33kV GIS panel to two station transformers
including end termination.Lot 1
8.5 1.1kV Power and Control Cables for the entire substation Lot 1
9.0 CABLING EQUIPMENT
9.1 All accessories for switchyard such as cable trays, racks, conduits, bends, tees,
junction boxes, etc. for the entire cabling system including all accessoriesLot 1
Lot 1
junction boxes, etc. for the entire cabling system including all accessories
10.0 OUTDOOR LIGHTING
10.1 Complete outdoor lighting system for switchyard including access road with
complete accessories, lighting panels etc.
Lot1
11.0 INDOOR LIGHTING
11.1 Complete indoor lighting system including all lighting panels & complete
accessoriesLot 1
12.0 EARTHING & LIGHTNING PROTECTION
12.1 Earthing and lightning protection systems for switchyard complete with earth grid
and mat, earth leads, electrodes, shield wire,clamps and connectors and all other
hardware & accessories
Lot 1
13.0 BATTERY& BATTERY CHARGER
13.1 110V DC Battery and Battery charger No 2
14.0 DISTRIBUTION BOARDS
14.1 AC Distribution board Set 2
14.2 DC Distribution board Set 2
Schedule 2/Erection/Page 2 of 3
1 2 3 = 1 x 2
ItemDescription
Unit Prov. Quantity Unit Price Total
15.0 FIRE FIGHTING SYSTEMS
15.1 Fire Fighting Equipment and Fire Fighting System including Emulsifier System for
Power Transformers (2 Nos. power transformers)Lot 1
16.0 FIRE ALARM & DETECTION SYSTEM
16.1 Complete fire alarm and detection system as per technical specifications Lot 1
17.0 SURVILANCE AND SECURITY SYSTEMS
17.1 Complete CCTV systems along with complete accessories Lot 1
18.0 EPABX SYSTEM
18.1 Complete EPABX system suitable for optic fibre communication along with all accessories. LOT 1
19.0 FIBRE OPTIC CABLE
19.11310 nm, Monomode Underground Armoured Fibre Optic approach cable, Joint
Boxes,Pigtails, clamps & any other required accessoriesLOT 1
20.0 DIESEL GENERATOR(DG) SET20.0 DIESEL GENERATOR(DG) SET
20.1 Diesel generator set, 50 kVA, 415V along with control panel and required accessories No. 1
21.1 33kV LATTICE STRUCTURE
21.133 kV out going feeders Lattice structure inclusive of all items like Lightning Arresters,
Isolators with earth blade, insulators, hardware accessories completeSet 4
22.0 EOT Crane Lot 1
TOTAL
Schedule 2/Erection/Page 3 of 3
Amount in Nu.
Item Description UnitProv.
QuantityUnit Price Total Amount Remarks
1 Complete testing and commissioning of substation including
design and engineering of Aux. Systems.Lot 1
TOTAL
3. TESTING AND COMISSIONING
TURNKEY PACKAGE FOR DESIGN, SUPPLY, CONSTRUCTION, ERECTION, TESTING & COMMISSIONING OF 2 X 5 MVA, 66/33
KV INDOOR GIS SUBSTATION INCLUDING ALL OTHER ASSOCIATED WORKS AT DAMJI IN GASA DZONGKHAG
Schedule 3/Testing Commissioning/Page 1 of 1
1 2 3 4 = 1 x 3 5 6 7=1x2x5 8=1x2x6 9=4+7+8
1.0 66kV GIS SPARE PARTS
1.1 Set of Gasket/'O'Rings for one complete bay No 1
1.2 Rupture Disc for gas compartment Set 2
1.3 Gas Insulating Barrier for gas compartment Set 2
1.4 Circuit Breaker Trip Coils Set 5
1.5 Circuit Breaker Closing Coils Set 5
1.6 Gas Density Monitor with Pressure Swicth Set 2
1.7 Manual Operation Handle for Circuit Breaker No 2
1.8 Manual Operation Handle for DS and ES No 2
1.9 Moisture absorbent No 2
1.10 Additional SF6 Gas (5% from the total quantity) No 1
1.11 Curent Transformer Set 1
1.12 PT No 1
1.13 LA Set 1
1.14 Discnector Set 1
1.15 High Speed Earth switch Set 1
2.0 LIGHTNING ARRESTORS
2.1 60kV Lightning Arrestor
2.1.1Single phase surge arrestor complete in all respect
including base and surge monitorSet
1
2.1.2 Terminal connectors Set 1
2.2 33kV Lightning Arrestor
2.1.1 30kV surge arrestor including surge monitor Set 2
2.1.2 Terminal connectors Set 2
4. SUPPLY & DELIVERY OF ESSENTIAL SPARES AND SPECIAL TOOLS
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
Site
TURNKEY PACKAGE FOR DESIGN, SUPPLY, CONSTRUCTION, ERECTION, TESTING & COMMISSIONING OF 2 X 5 MVA, 66/33 KV INDOOR GIS SUBSTATION INCLUDING
ALL OTHER ASSOCIATED WORKS AT DAMJI IN GASA DZONGKHAG
CD/Tax Amount BST Amount Total Including
CD/taxes & BST
Schedule 4/Spares Special Tools/Page 1 of 5
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
SiteCD/Tax Amount BST Amount
Total Including
CD/taxes & BST
3.0 SPECIAL TOOLS FOR GIS EQUIPMENT
3.1Set of SF6 Gas Filling Adapter/Device Including
Hoses Valves, etc.Set 1
3.2 Set of SF6 Gas Filling and Evacuating Equipment Set 1
3.3 Set of Dew Point Meter Set 1
3.4 Precision Pressure Gauge Set 2
3.5 SF6 Gas Leakage Detection Device Set 1
3.6 Set of Torque Wrench Set 1
3.7 Tong tester meter(0mA to 2A) No 1
3.8 Digital Multi meter No 1
3.9 Megger (5KV) No 1
3.10 Earth resistance clamp on meter No 1
3.11 BDV test kit No 1
4 TRANSFORMER SPARE PARTS
4.1 66/33kV TR
4.1.1 Breather -(Silica gel(12.5kg)) No 1
4.1.2 Gasket Set 1
4.1.5 HV Bushing mounted inside the cable box Set 1
4.1.6 LV Bushing mounted inside the cable box Set 1
4.1.7 OTI No 1
4.1.8 WTI No 1
4.2 33/0.415 kV TRANSFORMER
4.2.1 33 kV bushing mounted inside cable box No. 1
4.2.2 0.415kV bushing with metal parts with gaskets
mounted inside cable boxNo.
1
4.2.3 Set of gaskets Set 1
Set of Valve complete Set 1
5 SPECIAL TOOLS FOR POWER TRANSFORMER
5.1 Adjustable angle wrenchs(10") Set 1
5.2 Adjustable angle wrenchs(6") Set 1
5.3 Adjustable angle wrenchs(8") Set 1
5.4 Adjustable angle wrenchs(12") Set 1
5.5 C-Clamp Set 1
5.6 Manila Rope_18DIA X 10M Set 4
5.7 Pipe Wrench (10INCH) Set 1
5.8 Pipe Wrench (6INCH) Set 1
5.9 Pipe Wrench (8INCH) Set 1
5.10 Pipe Wrench (12INCH) Set 1
5.11 Torque Wrench Set 1
5.12 Paint Spray Gun Set 1
Schedule 4/Spares Special Tools/Page 2 of 5
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
SiteCD/Tax Amount BST Amount
Total Including
CD/taxes & BST
6 33kV GIS PANEL SPARE PARTS
6.2 Closing coil of each type No. 6
6.3 Trip coil of each type No. 6
6.4 Potential transformer Set 1
6.5 Current transformer for Incomer Set 1
6.6 Current transformer for Outgoing feeder Set 1
7 CONTROL AND RELAY PANEL SPARE PARTS
7.1 66kV
7.1.1 Control Switches No. 1
7.1.2 Relays one number of each type No. 1
7.1.3 Meters one number of each type No. 1
8 POWER CABLE & CABLE TERMINATIN.
8.1 Single Phase 66kV, 630sq.mm cable Mtr. 300
8.2
33kV, 1Cx630 sq. mm., XLPE, Aluminium, earthed
grade Cable alongwith associated termination &
accessories from 5MVA transformer to 33kV GIS
Switchgear
Mtr. 100
8.3
33kV, 3Cx300 sq. mm., XLPE, Aluminium, earthed
grade Cable alongwith associated termination &
accessories from 33kV GIS Switchgear to Lattice
Structure
Mtr. 400
8.4
33kV, 3Cx70 sq. mm., XLPE, Aluminium, earthed
grade Cable alongwith associated termination &
accessories from 33kV GIS Switchgear to
2X250kVA LT Transformer
Mtr. 50
8.5 66kV Cable termination kits at gantry end Set 2
8.6 66kV cable sealing end at GIS bus Set 4
66kV cable termination kit at 2x5MVA transformer Set 2
8.7Indoor cable termination kit for 33kV incommer at
GIS Switchgear end.Set 2
8.8Indoor cable termination kit for 33kV outgoing
feeders at GIS Switchgear end.Set 4
8.9Indoor cable termination kit for station transformer
feeders at GIS Switchgear end.Set 2
8.10Out door cable terminationkit for all types of 33kV
power cable each.Set 4
Schedule 4/Spares Special Tools/Page 3 of 5
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
SiteCD/Tax Amount BST Amount
Total Including
CD/taxes & BST
10.0 BATTERY CHARGER
10.1 Spares for 110V Battery Charger
10.2 SCR for Recifier bridge No. 1
10.3 Blocking diode for rectifier bridge No. 1
10.4 Electronic control card for AVR No. 1
10.5 Electronic conrol card for AVR / ACR No. 1
10.6 Electronic control card for OCR No. 1
10.7 HRC fuse link for output ckt. Set 1
10.8 Fuse link for various control ckt. Set 1
10.9 Indicating Lamps Set 1
11.0 MCC and Control panel each
11.1 Indicating lamps (Set consists of 1 no. of each type) Set 1
11.2 Lamp holder and globes (Set consists of 1 no. of each
type)Set
1
11.3 Control fuse (Set consists of 1 no. of each type) Set 1
11.4 Push buttons (Set consists of 1 no. of each type) Set 1
11.5 Auxiliary relay (Set consists of 1 no. of each type) Set 1
11.6 Annunciation cards No 1
11.7 Sound card No 1
12.0 LIGHTING EQUIPMENT
12.1 Outdoor lighting (LED) with complete fittings. No 5
12.2 Indoor lighting (LED) for each type including
complete fittingsNo
10
13.1 SCADA Computer spares
13.2 Hard Disk Drive No. 1
14 SAS Spares
14.1 Bay IED No. 1
14.2 Longest length of fibre optic cable No. 1
14.3 Ethernet Switch No. 1
15.0 EPABX Lot 1
16.0 FIRE ALARM SYSTEM
16.1 Manual Call Point No. 1
16.2 Detector of each type Set 1
17.0 CCTV
17.1 PC based Digital Video Recorder System Lot 1
Schedule 4/Spares Special Tools/Page 4 of 5
Unit Price
EX-work
Total
Excluding CD
& BST
CD /
Taxes BST SN Description Unit QTY'
Unit Price CIF
SiteCD/Tax Amount BST Amount
Total Including
CD/taxes & BST
18 EOT CRANE FOR GIS HALL
18.1
Pair of brake shoe with lining for each size of brake
used viz. D.C. operated E.M, or Hydraulic thruster
operated.
Sets 2
18.2Pair of brake linings with rivets for each size of
brake used.Sets 2
18.3 Main springs for each size of brake used. Nos. 2
18.4 Brake coils for each size of brake used. Sets 2
18.5 Thruster of each size used. No. 1
18.6 Pair of oil seals for each gear box used on crane. Sets 2
18.7 Contactors of each size used. Sets 2
18.8Fixed & moving contacts of each size of contactor
used.Set 1
18.9 3 Nos. Coils for each size of contactor used. Set 1
18.10 Overload relay for each motor. No. 1
18.11 Timers Nos. 3
18.12 3 No. fuse links of each sizes used on crane Sets 2
18.13 1 Printed circuit breaker of each size and type Set 1
18.14 Complete set of lamps for lightning and signals Set 1
18.15 Carbon brushes & holdings for each slip ring motor Sets 2
18.16 Fuse links of each size used Sets 2
18.17 Resistance element of each size and type Set 1
18.18 Communication Cards/cables
18.19 I/O Cards
18.20 Processors
18.21 Indicating lamps
TOTAL
Set (for one
complete crane)1
Schedule 4/Spares Special Tools/Page 5 of 5
1 2 3 4 (3x2)
1.0 Earth Works
1.1
Earthwork in excavation including clearing away vegetation, if any in foundations, and pits trenches, drains, road formation and
earthing etc. in all types of soils (ordinary/ hard soil) in both dry and wet conditions including shoring, strutting, dewatering,
dressing of sides and ramming of bottom & backfilling with selected earth from excavation in layers of 200 mm, watering,
ramming, consolidation & transporting excavated material (at all leads and lifts) to temporary stockpiles within the
PURCHASER’s premises, spreading, levelling etc. all complete as specified and as directed.
(a) Depth upto 3.00 m from G.L. Cu.M. 3433
(b) Depth exceeding 3.00 m and upto 6.00 m Cu.M. 892
(c) All Depths exceeding 6.00 m. Cu.M. 541
1.2 Same as the item No.3.1 but for excavation in soft rock at all depths. Cu.M. 270
1.3 Same as the item No.3.1 but for excavation in hard rock at all depths. Cu.M. 135
1.4 Extra over items 3.1 to 3.3 for lead outside PURCHASER’s premises upto 2.00 km. Cu.M. 135
1.5
Earthwork in embankment for roads/ ramps with excavated earth obtained from items 3.1 to 3.3 above or any other excavation,
including handling and transporting excavated earth from PURCHASER’s premises at all leads, depositing in layers 200 mm
deep, watering and compacting the same to 95% Modified Proctor density, finishing and dressing, etc. complete all as specified.
Cu.M. 120
Earthwork in filling in plinth under floors, ramps, etc. including watering, ramming, compacting to 95% Modified Proctor density
and dressing to the required profiles, etc. complete, as directed by the Engineer.
(a) With excavated earth from stockpiles in the PURCHASER’s premises at all leads Cu.M. 3,784
(b) With excavated earth from approved borrow areas from outside PURCHASER’s premises upto a lead of 2.0 km Cu.M. 1,622
1.7 Extra over items 3.5 & 3.6 for lead from
i) 2 km - 5 km. Cu.M. 75
ii) 5 km -10 km. Cu.M. 45
1.8
Supplying approved granular / coarse granular material with maximum particle size of 20mm, brought from borrow pits outside
PURCHASER’s boundary and filling at places wherever specified including clearing away vegetation, depositing in layers not
exceeding 150 mm, watering and compaction with mechanical compaction machines to 70% of relative density including
finishing to specified slopes, etc. all as specified
Cu.M. 80
1.9Supplying and spreading 150mm thick layer of 40mm nominal size (ungraded) of uncrushed/crushed/broken stone including
clearing vegetation and compacting the same to correct lines and levels, etc. complete.Cu.M. 320
1.10
Earthwork in excavation including clearing away vegetation if any, for general site grading in all types of soils (ordinary/ hard
soil) in both dry and wet conditions & transporting excavated material (at all leads and lifts) to temporary stockpiles within the
EMPLOYER’s premises, spreading, levelling etc. all complete as specified and as directed.
SCHEDULE - 6: EARTH WORKS FOR 66/33 kV GIS SUBSTATION AT DAMJI, GASA
Total Price DescriptionItem
1.6
UnitProvisional
Quantity Unit Price
Page 1 of 2
1 2 3 4 (3x2)
SCHEDULE - 6: EARTH WORKS FOR 66/33 kV GIS SUBSTATION AT DAMJI, GASA
Total Price DescriptionItem UnitProvisional
Quantity Unit Price
a) Depth upto 3.00 m from G.L. Cu.M. 2,575
b) Depth exceeding 3.00 m and upto 6.00 m Cu.M. 945
c) All Depths exceeding 6.00 m. Cu.M. 319
1.11 Same as the item No.3.10 but for excavation in soft rock at all depths. Cu.M. 239
1.12 Same as the item No.3.10 but for excavation in hard rock at all depths Cu.M. 80
1.13 Extra over items No.3.10 to 3.12 for lead outside EMPLOYER’s premises upto
a) 2.00 km. Cu.M. 239
b) 5.00 km Cu.M. 160
1.14Filling for general site grading with selected excavated surplus material including transporting within the owner's premises, and
levelling but excluding excavation, as directed by the Engineer.
a) With excavated earth from stockpiles in the EMPLOYER’s premises at all leads. Cu.M. 1425.0
b) With excavated earth from approved borrow areas from outside EMPLOYER’s premises upto
i) 2.00 km. Cu.M. 120
ii) 5.00 km Cu.M. 100
iii) 10 km Cu.M. 50
1.15Same as item No.3.14, but including depositing the approved excavated material in layers in line and level and compacting the
same to the finished grade level to 95% Modified Procter Density including watering, ramming,finishing, dressing etc complete.
a) With excavated earth from stockpiles in the EMPLOYER’s premises at all leads. Cu.M. 160
b) With excavated earth from approved borrow areas from outside EMPLOYER’s premises upto a lead of 2.0 km. Cu.M. 100.0
1.16 Extra over items 3.15 for lead of
a) 2 km to 5 km Cu.M. 120
b) 5 km to 10 km Cu.M. 100
c) 10 km to 15 km Cu.M. 80
Total Amount (Nu.)
Page 2 of 2
Ex-
Works
FAS
excluding
BST/CD
FAS
including
BST/CD
BST% CD%
Value(BST+CD)
1 2 3 4 5=1 x 3 6 7 8=(6+7)x1 x 2 9=1 x 4
1.0 Structural Steel
1.1
Supplying, Transporting, fabricating, loading,
unloading, etc of Hot dip galvanized structural steel
work fabricated from rolled sections, Compound
Sections built from Rolled Steel Sections and plates,
(The rate shall include bolts, nuts, flat washers,
foundation bolts,pack washers,plates)
All works strictly shall be carried out as per approved
drawings after detailed Engineering)
M.T. 8
1.2
Same as item no.1.1 above but for chequered plates
including fixing/ welding opening notches etc. all as per
specifications and drawings.(a) Non galvanised
M.T. 0.50
1.3
Supply, fabricate, transport, delivery to site, loading
and unloading, etc. for insert plates, angles for cable
trenches, precast cover slab &floor grating of approved
make and pattern, fabricated to required shapes and
sizes including making opening in same of required
shape and size fixing clamps, clips or welding as per
specifications and drawings
M.T. 0.40
2.0 Concrete and Allied Works
2.1
Supply including handling and transport complete,
tested grade steel reinforcement for all reinforced
concrete works. all as per approved drawings
a)Using high yield strength deformed bars conforming to
IS:1786 (All diameters)
i 8 mm to 12 mm MT 11
ii 16 mm dia. and above MT 5
Total Amount (Nu.)
SCHEDULE - 7: SUPPLY OF STRUCTURAL STEEL AND REINFORCEMENT STEEL WORKS FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
Unit Provisional
Quantity
Provision for BST/CD Unit Price
Total FAS
including BST/CD Item Description
Total FAS excluding
BST/CD
Pg. 1 of 1
Unit Price Total Price
1 2 3 4 (3x2)
1.0 Structural Steel
1.1
Erection of Main and Auxiliary structures including all works above ground level Rolled sections, Compound Sections
built from Rolled Steel Sections and plates, Miscellaneous steel work such as stairs, ladders, etc., Plates only, For water
tanks, covers, ducts, etc.
(The rate shall include bolts, nuts, washers, welding, all butt weld splices for making up member length as required and
shall also include one shop coat of red oxide zinc chrome primer after erection)
All works strictly shall be carried out as per approved drawings.
M.T. 8
1.2Same as item no.1.1 above but for chequered plates including fixing/ welding opening notches etc. all as per specifications
and drawings.(a) Non galvanisedM.T. 0.5
1.3
Fixing in position of M.S.non-galvanised floor grating of approved make and pattern, fabricated to required shapes and
sizes including making opening in same of required shape and size fixing clamps, clips or welding as per specifications
and drawings.
M.T. 1.5
2.0 Concrete and Allied Works
2.1
Providing and Laying plain or Sulphate resistant cement concrete with or without water proofing compound in blinding
layer, thickness as shown in drawings, including antiweed treatment, etc. with 1:5:10 concrete with aggregates of size
20mm downgraded including curing, etc. complete. (Rate to be inclusive of supply of all necessary material like
formworks & nails, laying in position as per specifications and as directed by Engineer for the substation area below the
gravel.)
Cu.M. 9
2.2
Providing and Laying plain or Sulphate resistant cement concrete with or without water proofing compound in blinding
layer, thickness as shown in drawings, under reinforced concrete, masonry walls in foundations, grade slabs, bottom of
pits, sumps, etc. with 1:3:6 concrete with aggregates of size 20mm downgraded including curing, etc. complete. (Rate to be
inclusive of supply of all necessary material like formwork & nails, laying in position as per specifications and as directed
by Engineer.)
Cu.M. 209
(a) Providing and Laying Reinforced concrete of grade M20 with or without water proofing compound excluding
reinforcement but including formwork, with coarse aggregate of sizes 20 mm downgraded as directed by Engineer in
foundations (all types), walls, grade slabs, road pavement and any other structures including vibrating, curing, etc.
complete. (Rate to be inclusive of supply of all necessary material like formwork & nails, laying in position as per
specifications and shall include mixing of water-proofing compound where-ever directed by Engineer.)
Cu.M. 353
(b) Same as in item 2.5(a) but for concrete of grade M25. Cu.M. 15
2.4
Supplying & fixing in position all items required for Box type waterproofing treatment to basement walls & slabs as
specified by India Waterproofing Company or equivalent (Contractor to furnish 10 years Guarantee in format acceptable to
EMPLOYER.)
Sq.M. 50
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
2.3
Page 1 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
2.5
Placing in postion including cleaning, cutting, bending, lapping, binding with 16 SWG annealed soft iron wire/welding,
irrespective of locations & levels, all as per drawings including handling and transport complete, tested grade steel
reinforcement for all reinforced concrete works.
(a) Using high yield strength deformed bars confirming to IS:1786 (All diameters).
i. 8 mm to 12 mm M.T. 11
ii. 16 mm dia. and above M.T. 5
2.6 Providing and laying approved water proofing compound in concrete / plastering for works, where specified. Kg. 5
2.7
Supplying & fixing precast slabs including suitable formwork to provide smooth finish, casting, curing, storing, protecting
under appropiate conditions, erecting them in position , etc. complete using M20 concrete with 20mm downgraded coarse
aggregate for trench covers including lifting hooks as required and as per specification & drawings.
Sq.M. 22
2.8
Supplying, fabricating and fixing in position in concrete or in masonry at any level, of length between 150 to 600 mm MS
flanged puddle pipes conforming to IS 1239 with puddle including one coat of primer on exposed surfaces all as per
specifications and as directed. (Flanges shall be flat face and shall be as per ANSI B 16.5 150 rating.)
(a) 25 mm dia. No. 50
(b) 50 mm dia. No. 25
(c) 75 mm dia. No. 15
(d) 100 mm dia. No. 10
2.9
Grouting pockets, holes, pipe sleeves of any shape or size for column bases, Machine foundations, etc. with cement mortar
1:2 with water cement ratio not more than 0.5 including roughening surface, cleaning with compressed air/ water jets,
ramming, curing, etc. complete.
Cu.M. 5
2.10Supplying & laying integral floor finish with 15 mm thk. layer of “Ironite” or equivalent on concrete floor. (using not less
than 2 kg of “Ironite” per sq.m).Sq.M. 25
2.11Supply & fixing of approved PVC water stops as indicated in drgs. Including all necessary splices etc. as per
manufacturer’s instructions, etc. complete.
(a) 150 mm ribbed type-min 10thk R.M. 28
(b) 225 mm ribbed type-min 10thk. R.M. 28
2.12
Supplying & Laying uncoursed random rubble mansonry wherever specified, with approved quality locally available hard
stone in cement mortar (1:5) including scaffolding, curing, raking of joints and flush/raised pointing in (1:3) cement mortar
etc. complete.
Cu.M. 480
Page 2 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
3.0 Road Works and Drains
3.1Supplying & Laying sand filter layer 225 mm thick including spreading and compacting to lines and levels as specified
using sand of classification D 85 < 4 D15, D2 > 2.5mm (D2 refers to sieve size permitting 2% by weight, etc.). Sq.M. 1500
3.2Supplying & laying soling course of finished thickness of 230 mm, packing with 80 mm metall, dry rolling, sprinkling
gravel, watering and rolling, etc. all complete as specified. Sq.M. 1500
3.3Supplying & Laying waterbound macadam course of compacted finished thickness of 100mm including dry rolling,
spreading and consolidation of screening and binding material all complete as specified.Sq.M. 1500
3.4Supplying & laying Hammer dressed stone edging 150 x 250 mm with stones including excavation, refilling and disposal
of surplus earth within 30 m lead.R.M. 300
3.5 Supplying & Laying 50mm thk. Asphalt concrete macadam course as per specifications. Sq.M. 1500
3.6 Supplying & Laying 25mm thick premix asphalt macadam including tack coat as per specifications. Sq.M. 1500
3.7Supplying & Laying a seal coat of asphalt of grade 80/100 at 1.5 kg/sq.m. and spreading grit, brushing, rolling, etc.
complete as specified and as directed.Sq.M. 1500
3.8
Supplying & Laying reinforced concrete road with thickness as specified in the specification with or without water
proofing compound excluding reinforcement but including formwork, with coarse aggregate of sizes 20 mm downgraded
as directed by Engineer including vibrating, curing, etc. complete. (Rate to be inclusive of supply of all necessary material,
laying in position as per specifications and shall include mixing of water-proofing compound where-ever directed by
Engineer.)
Cu.M. 56
3.9Supplying, & Laying, jointing, hydraulically testing NP2 class cement concrete pipes conforming to IS:458 for cable
crossing etc. (Pipe shall have collar joint sealed in C.M. 1:2).
(a) 150 mm dia. R.M. 10
(b) 300 mm dia. R.M. 10
(c) 450 mm dia. R.M. 10
(d) 600 mm dia. R.M. 15
(e) 900 mm dia. R.M. 15
3.10Supplying, & Laying, jointing, hydraulically testing NP3 class cement concrete pipes conforming to IS:458 for cable
crossing etc. (pipe shall have collar joint sealed in C.M. 1:2).
(a) 150 mm dia. R.M. 10
(b) 300 mm dia. R.M. 10
(c) 450 mm dia. R.M. 10
(d) 600 mm dia. R.M. 15
(e) 900 mm dia. R.M. 15
Page 3 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
3.11
Supplying, laying & fixing G.I. pipes of Class ‘C’ ( unit price to be inclusive of necessary heavy class GI fitting such as
tees, bends, unions, elbows, reducers, sockets, flanges, check nuts, plug ends, etc. ) in vertical or horizontal position at all
heights, including cutting, threading, bending and jointing, cutting holes in the walls or floors and making good the same
with cement mortar 1:4, trenching, refilling , sand bedding, providing necessary G.I. malleable clamps and supports and
testing the line as specified complete.
(a) 100 mm dia. R.M. 1318
(b) 50 mm dia. R.M. 155
(c) 32 mm dia. R.M. 78
(d) 25 mm dia. R.M. 65
4.0 Building and Miscellaneous Works
Supplying & laying of Brick masonry in super structure in cement mortar 1:6 (1 cement : 6 coarse sand ) using approved
quality country bricks including scaffolding, curing, raking of joints, etc. as specified for walls, etc. at all levels.
i. 115 mm thick including placing chicken mesh at every 4th layer. Sq.M. 25
ii. same as item No.4.1(i) above but in C.M. 1:4. Sq.M. 5
iii. 230 mm thick and above. Cu.M. 10
4.2 Same as in item No.4.1 but for brick masonry in cement mortar 1:6 in foundations and in plinth.
(a) 230 mm thick and above. Cu.M. 8
4.3
Supply, Providing & laying hammer dressed RRM with approved quality locally available hard stone in cement mortar
(1:5) including scaffolding, curing, raking of joints and flush/raised pointing in (1:3) cement mortar etc. complete.for
boundary wall as per specification, drawings and as directed by Engineer. ( including supply & fixing in position 11nos of
barbed wire and concertina coil of 700mm dia., 80 nos of circles per running meter. Clips hot dip galvanised. The wire
shall be of 12SWG Tensile wire, covering 10RM with one coil, each RM will have 8 nos. of circles etc.).
R.M. 763
Providing & Laying Interior plain faced cement plaster in C.M. 1:6 with neeroo finish on all types of surfaces specified in
drawings at all levels. The rates shall also include moulding wherever specified, scaffolding, curing, etc.
(a) 12 mm thick on brick walls and concrete surfaces. Sq.M. 50
(b) 6 mm thick on underside of slabs. Sq.M. 30
Providing & Laying 20 mm thick exterior cement plaster in C.M. 1:3 in two layers, with first layer of 14mm thickness, and
second layer of 6mm thickness, using sand of approved quality, size and shape and including providing bands, grooves,
drip moulds, and including scaffolding, curing, etc. complete at all levels.
(a) Sand faced plaster including grooves in plaster. Sq.M. 50
(b) Plain sand faced plaster. Sq.M. 50
4.6Supply of 230 mm thick rubble packing under floor with approved hard stone, set in regular lines, hand packed, filling the
interstices with small stone chips and sand with approved hard stone obtained from borrow pits outside owner’s boundary.Sq.M. 100
4.5
4.1
4.4
Page 4 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
Supplying and fixing approved quality premoulded bituminous joint filter as per IS:1838 wherever specified.
a) 12 mm thick Sq.M. 20
b) 25 mm thick Sq.M. 20
4.8Supplying and filling in place bituminous sealing compound conforming to IS:1834 in grooves 25 mm x 25 mm over
joints.R.M. 20
4.9
Supplying and fixing the chain link fencing of 2.0m high above finished grade level, 50 x 50 mm mesh with 3.15 mm dia.
GI Wire. The chain link shall be clamped to angle posts ISA 65 x 65 x 6 at spacing not exceeding 2.5m by MS flat 50x6
with 16mm diameter bolt with flat washers.The foundation shall be anchored in 1:3:6 PCC block of size 350mm x 350mm
x 600mm deep, including providing of braced bays at corners and every tenth bay with angle ISA 75x75x6 diagonal
bracing one 4mm diameter galvanised MS line wires at top and bottom including erection, painting over approved primer
cost, etc. complete as per details indicated in the drawings.
Sq.M. 150
4.10
Providing & Fixing in place 1000 litres capacity SINTEX or equivalent high density polyethylene cylindrical vertical water
tank on roof, with closed top including all GI fixtures and fittings for 25 mm Inlet, 25mm outlet, 25mm overflow, 50mm
scour connection and PVC float valve complete.
No. 2
4.11
Supply, Design, fabricate, transport to site and erect in position electrically operated sliding gate made out of hollow
rectangular MS pipes complete with drive unit having 3 phase motor and gear arrangement, electric control panel, limit
switches and arrangement for manual operation, as per standard supply including all necessary fixtures, etc. complete.
Rate shall include all inserts and embedments essential for smooth operation of the gate. The rate shall also include for 3
coats of enamel painting of approved brand and shade after erection over 2 coats of red oxide zinc chromate primer.
Sq.M. 30
4.12Supply & Fixing of 140 mm dia. HDPE pipes PE 63 grade with pressure rating of PN 2.5 conforming to IS:4984 for
cables at road/pavement crossings as per drawing.R.M. 25
4.13Supply & Fixing of 110 mm dia. HDPE pipes PE 63 grade with pressure rating of PN 2.5 conforming to IS:4984 for
weeps holes in the walls. as per drawing.R.M. 80
4.14
Supplying, Fabricating and erecting M.S. gates consisting of M.S. angle framework (Internal) and 25 mm dia. G.I. pipe
external frame work using ISA 50x50x6 with 6mm thick MS joining plates including chain link stretched and tack welded
over the framework with necessary hinges, locking arrangement including applying one coat of red oxide paint to all
exposed surfaces of steel. Contractor shall arrange for all the materials, tools, labour, etc. required to complete the job.
Sq.M. 50
4.7
Page 5 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
5.0 Building Works
A. EARTH WORKS
1.00Excavation in foundation trenches or drains, for all width<1.5m & area 10sqm in plan, incl. dressing & ramming, disposal
of surplus soil for all lead & lift -All kinds of Soil for footings and wall footings etc.
1.10 All kinds of soil. Cu.M 404
1.20 Ordinary rock with or without blasting. Cu.M 106
2.00
Hand excavation and refilling in layers < 200 mm, of trenches for pipes incl. dressing of sides/ ramming of bottom, depth
up to 1.5m, disposal of surplus materials within lead of 50 m. ( For external water supply pipes & waste pipes) - All kinds
of soil for pipes(80 mm< dia < 300 mm).
M 715
3.00Filling of trenches, sides of foundations etc. in layers < 200 mm using selected excavated earth, ramming etc. within lead
50 m & lift 1.5 m.Cu.M 415
B. STEEL WORKS
4.00Providing & fixing cold twisted deformed bar (Fe500) for R.C.C work incl. cutting, bending, binding & placing in position
complete, in footings, columns, beams, slabs, lintels, cornices and props etc.Kg 60812
5.00 Providing and fixing stainless steel staircase handrails, balustrades, horzontal pipes etc, complete as per the drawings. Set 1
C. P.C.C & R.C.C WORKS
6.00Providing & laying Cement concrete 1:4:8, 40 mm agg., excluding the cost of centering & shuttering-in foundation and
plinth- All works uptp plinth levels.Cu.M 37
7.00Providing & laying R.C.C 1:1.5:3, 20 mm agg. excluding the cost of formwork & reinforcement cost in- foundation pads,
bases of columns below plinth, plinth beams, etc, complete. Cu.M 150
8.00Providing & laying R.C.C 1:1.5:3, 20 mm agg. excluding the cost of formwork & reinforcement cost for- Columns above
plinth beams, props, etc complete.Cu.M 50
9.00Providing & laying R.C.C 1:1.5:3, 20 mm agg. excluding p&f the cost of formwork & excluding reinforcement cost for -
First floor slab, roof slab, prorch, landings of staircase, etc complete.Cu.M 68
10.00Providing & laying R.C.C 1:1.5:3, 20 mm agg. excluding the cost of formwork & reinforcement cost for - floor beams,
lintels, staircases, etc. Cu.M 105
Page 6 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
11.00
Providing & laying traditional R.C.C Cornices in 1:1.5:3, 20 mm agg. including cost of formwork including finishing with
6mm thick plaster on the exposed surface with cement mortar 1:3, excluding reinforcement & decorative painting cost as
per standard design/drawings furnished (Meas. to be along the cornice and wall junction).
11.10 Multi-storied building at floor 2 level including the cost of lhanglag and at other floors where lhanglag is provided. M 27
11.20 Phana at roof level cornice. M 83
11.30 Lintel cornice (only cornice portion at external face). M 229
12.00
Providing & laying water tank for fire fighting system including RCC, 1:1:2, 20 mm agg. with water proofing compound,
the cost of formwork, reinforcement, pipes, water stoppers, valves, water level indicators etc, complete as per specification
and drawings in accordance to IS:3370.
Each 1
D. FORM WORKS
13.00 Providing & fixing centering and shuttering (formwork), including strutting, propping etc. and removal of formwork.
13.10 Foundations and plinths. Sq.M 630
13.20 Beams and lintels. Sq.M 740
13.30 Columns above plinth upto props. Sq.M 460
13.40 Staircase excluding landing. Sq.M 13
13.50 Slabs including landings of staircase. Sq.M 302
E. STONE/BRICKWORK
14.00 Providing & laying Hand packed stone filling/soling (under flooring footings and retaining walls). Cu.M 118
15.00 Providing & laying Random Rubble Masonry with hard stone in foundation & plinth - In CM 1:5 under plinth beams. Cu.M 60
16.00 Providing & laying 250 mm Cement Concrete Block in superstructure (upto floor 2 level ) as external infill- In CM 1:4. Cu.M 187
17.00 Providing & laying 125 mm Cement Concrete Block in superstructure (upto floor 2 level ) as internal infill- In CM 1:4. Sq.M 28
F. PLASTERING
19.00 Providing & laying 6 mm cement plaster (in ceilings) in cement mortar 1:4. Sq.M 193
20.00Providing & laying 12 mm cement plaster on rough side of single or half -brick wall - C.M 1:4 (Internal walls above plinth
including exposed portion of beams and columns).Sq.M 115
21.00 Providing & laying 20 mm cement plaster - C.M 1:4 (External walls Above plinth). Sq.M 664
22.00 Providing & laying cement plaster, finished with floating coat of neat cement - 20 mm plaster in C.M 1:4 in plinth walls. Sq.M 102
23.00Providing & applying plaster of paris putty 12 mm thickness over plastered surface to prepare the surface even and smooth
complete.Sq.M 133
Page 7 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
G. FLOORING
24.00 Providing and laying sand bedding, including watering, ramming, dressing , etc in ground floor. Cu.M 25
25.00 Providing and laying 2.5 mm thk. Bitumen sheet in floors of ground floor and under walls. Sq.M 454
26.00Providing and laying in position plain cement concrete 1:3:6, 20 mm aggregate excluding the cost of centering and
shuttering in floors of ground floor - 100 mm thk.(All work up to plinth level).Cu.M 45
27.00 Providing and laying cement concrete flooring 1:2:4 finished with floating coat of neat cement. Sq.M 260
28.00Providing & laying Epoxy Flooring in ground floor vertified and polished - in white cement as per the drawings and
specifications (FF1)- Shades to be choose by Client.Sq.M 245
29.00Providing & laying 150 mm Epoxy skirting in ground floor vertified and polished - in white cement as per the drawings
and specifications (FF1).M 49
30.00Providing & laying anti-acid floor tiles in Battery Room, 25 mm thick, vetrified and polished- in white cement as specified
in architectural drawings (FF2).Sq.M 31
31.00Providing & laying 150 mm anti-acid skirting tiles in Battery Room, 25 mm thick, vetrified and polished- in white ceemnt
as specified in architectural drawings (FF2).M 23
32.00Providing & laying anti-acid wall tiles in Battery Room, 25 mm thick, vetrified and polished up to 2.1 m height from
finished floor levels - in white ceemnt as specified in architectural drawings (WT3).Sq.M 48
33.00Providing & laying terrazo floor tiles, 25 mm thick, vetrified and polished- in grey cement as specified in architectural
drawings (FF3).Sq.M 94
34.00Providing & laying 150 mm terrazo skirting tiles, 25 mm thick, vetrified and polished- in grey cement as specified in
architectural drawings (FF3).M 88
35.00Providing & laying granite floor tiles, 25 mm thick, vetrified and polished in landings and tread risers of staircase in grey
cement as specified in architectural drawings (FF4).Sq.M 14
36.00Providing & laying 150mm granite skirting tiles, 25 mm thick, vetrified and polished in staircase in grey ceemnt as
specified in architectural drawings (FF4).M 10
37.00Providing & laying anti-skid terrazo floor tiles, 25 mm thick, vetrified and polished in washrooms in grey cement as
specified in architectural drawings (FF5).Sq.M 16
38.00Providing & laying 150mm anti-skid terrazo skirting tiles, 25 mm thick, vetrified and polished in washrooms in grey
cement as specified in architectural drawings (FF5).M 38
39.00Providing & laying ceramic wall tiles, 25 mm thick, vetrified and polished in washrooms walls up to 2.1 m height from
finished floor levels in white cement as specified in architectural drawings (WT1).Sq.M 79
Page 8 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
40.00Providing & laying ceramic wall tiles, 25 mm thick, vetrified and polished in pantry walls up to 2.1 m height from finished
floor levels in white cement as specified in architectural drawings (WT2).Sq.M 15
41.00Providing & laying granite -counter top in tiles, 25 mm thick, vetrified and polished in washrooms basins and pantry
counter in white cement as specified in architectural drawings (FF7).Sq.M 3
42.00
Providing and laying False Flooring, 600x600x40mm thick square modualr panel with 38mm High Density E1 chipboard
core strengthened with high performance thermosetting resins. Including substructure- heavy duty pedastal assembly &
stringers, anti static, anti-vibrational, all steel components epoxy caoted, fire rating confirming to BS 476 Part 6 & &,
Electrical resistivity as ASTM F150/NFPA 99/ANSI S7.1/CEI 61340, etc, complete. Substructure installed to support
panel shall b e suitable to achieve a minimum finished floor height of 600mm from existing floor level. The Engineer In-
charge shall choose suitable brands or equivalent to UNITILE UCBLA 38 SERIES, etc.
Sq.M 99
H. WINDOWS AND DOOR WOOKS Sq.M
43.00Providing & fixing pelmet 100 mm x 12 mm, with 25 mm dia. wooden curtain rod & brackets including M.S.flats
25x3x100 mm & plugs etc. complete - Mixed Conifer.Sq.M 81
44.00Providing & fixing anodised Aluminium doors, including all accessories such as U-rubber gasket for fixing glass panes,
weather strips or weather seals, roller, springs, glass panes, etc complete as per the drawings.M
44.10 Control room building
44.1.1 D0 Each 1
44.1.2 D1 Each 1
44.1.3 D2 Each 1
44.1.4 D3 Each 3
44.1.5 SD1 Each 1
44.1.6 SD2 Each 2
44.1.7 RS Each 1
44.20 Pump house
44.2.1 D1 Each 1
44.2.2 RS Each 1
44.30 Store shed
44.3.1 D1 Each 2
44.3.2 RS Each 1
44.40 Security Guard room
44.4.1 D1 Each 1
44.4.2 D2 Each 2
Page 9 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
45.00
Providing, making and fixing in position of timber Doors Components including frames, security bars (if any),brass tower
bolt 150 mm,brass handle 150 mm,brass hinges 250 mm,brass sliding bolts 250 mm and applying wood preservative on
unexposed surface and painting, all necessary hardwares (holdfast complete, bolts, screws etc.) as applicable and as per the
design drawing and specification.
45.10 D4 Each 5
45.20 D5 Each 3
46.00
Providing & fixing anodised Aluminium windows including all accessories such as U-rubber gasket for fixing glass
panes, weather strips or weather seals, roller, springs,glass panes, steel frames, hold fast, etc complete
as per the drawings / technical specification.
46.10 Control room building Each
46.1.1 W1 Each 21
46.1.2 W2 Each 5
46.1.3 WK Each 1
46.1.4 V1 Each 4
46.20 Pump house
46.2.1 W1 Each 4
46.30 Store shed
46.3.1 W1 Each 11
46.40 Security Guard room
46.4.1 W1 Each 1
46.4.2 W2 Each 2
46.4.3 V1 Each 2
I. PARTITION AND FALSE FLOORING
47.00
Providing & fixing anodised Aluminium partitions framing of specified sections including all accessories such as U-rubber
gasket for fixing glass panes, weather strips or weather seals, roller, springs, 8 mm thick prelaminated boards, etc
complete.
Sq.M 23
48.00 Providing & fixing TRAC-84C false ceiling as per the techincal specifications, complete. Sq.M 99
J. ROOFING
49.00Providing and fixing PPGI tropical deep green roof sheeting, including bolts,hooks,and nuts 8 mm dia. With bitumen and
G.I limpet washers filled with white lead for connection, etc, excluding the cost of purlins,struts, rafters and trusses.-24G.Sq.M 934
50.00Providing and fixing 600 mm ridges or hips in PPGI roof sheeting including bolts, hooks, and nuts 8mm dia. With bitumen
and G.I limpet washers filled with white lead for connection. M 140
51.00Steel work welded, in built up sections, trusses, frameworks including cutting, hoisting, fixing and appl. Priming coat of
red lead paint. in tubular sections.Kg 15560
52.00 Providing and fixing MS round hold-down bolts with nuts and washer plates, complete in all areas. Kg 625
Page 10 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
53.00 Providing & fixing bolts and expansion bolts (wherever necessary) of various sizes including nuts & washers. Kg 680
54.00 Providing, making and fixing, M.S plates all thickness complete in roof truss work. Kg 813
55.00Providing and fixing 450 mm over all semi-circular PVC gutter, including brackets, bolts, nuts, washers and rain water
pipes connections, exlcluding the cost of pipes - 24g sheets.Kg 202
56.00Providing and fixing on wall face single socketed rigid PVC (working pressure 4kgf per sq.cm) rain water pipes including
jointing with seal ring leaving 10 mm gap for thermal expansion - complete - 110 mmM 55
57.00Providing and fixing on the wall face PVC coupler for rigid rain water pipes including jointing with seal ring leaving
10 mm gap for thermal expansion - complete - 110 mm.M 50
58.00Providing and fixing on the wall face PVC bend for rigid rain waer pipes including jointing with seal ring leaving 10 mm
gap for thermal expansion - complete - 110 mm.M 19
59.00 Providing, making and fixing M.S. straps, flats, sole plates etc in eaves board of 225x2 mm M.S flats in roof. M 37
K. PLUMBING WORKS
60.00 Providing & fixing PVC pipes incl. PVC fittings & clamps & repair walls - 20 mm internal piping. M 35
61.00 Providing & fixing PVC pipes incl. PVC fittings & clamps & repair walls - 25 mm external piping. M 20
62.00 Providing & fixing PVC pipes incl. PVC fittings & clamps & repair walls - 40 mm external piping (excluding trenching). M 425
63.00 Providing & fixing 600 x 450 mm bevelled edge mirror (superior glass) incl.4mm A.C sheet base fixed to wooden cleats. M 5
64.00 Providing & fixing c.p. towel rail 600 x 20 mm with c.p brass brackets fixed to wooden cleats. Each 4
65.00 Providing & fixing soap dish including brackets, wooden cleats, c.p. brass screws. Each 5
66.00 Providing & fixing soap dispenser including brackets, wooden cleats, c.p. brass screws. Each 5
67.00 Providing & fixing c.p brass bibcock - 15 mm standard vertical, c.p knob. Each 5
68.00 Providing & fixing pedestals for basins, white vit.china, recessed back for pipes & necessary fittings. Each 5
69.00
Providing and fixing flat back 550 x 400 mm wash basin with single 15 mm c.p brass pillar, including C.I brackets, 15 mm
C.P brass pillar taps, C.P chain and rubber plug 32 mm pvc waste, 32 mm dia trap & union, repair walls. (Note: Approval
for the brand have to be sought from the employer before the purchase of the items.)
Each 5
70.00Providing and fixing kitchen sink including all connections, fittings and repairs to walls, etc, stainless steel 580 x 480 x
175 mm single bowl.Each 1
71.00 Providing & fixing C.P Brass shower fittings with revolving joint, 15 mm. Each 2
Page 11 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
72.00Providing & fixing European‐type vitreous china w.c pedestal including seat and lid with c.p brass hinges, 15 lit white
vitreous china low level cistern, fittings, brackets, repair walls.Each 5
73.00 Providing & fixing toilet paper holder - Recessed ceramic, roll-type, 150 x 150 mm. Each 5
74.00 Providing & fixing plastic tank including all accessories complete - 2000 litre capacity. Each 2
75.00 Providing & fixing plastic tank including all accessories complete - 3000 litre capacity. Each 2
76.00 P & f P.V.C Nahani Trap - 110 mm inlet & 75 mm outlet. Each 10
77.00 Providing & fixing brass stop cock - 25 mm ( At junction-External). Each 5
78.00Providing & fixing P.V.C soil and vent pipes, single or double socketed, including pipe clip complete (excluding the cost
of PVC fittings)-110 mm dia.M 26
79.00 Providing & fixing P.V.C Coupler -110 mm dia. Each 13
80.00 Providing & fixing P.V.C Coupler -75 mm dia. Each 13
81.00 Providing & fixing P.V.C door bend - 75 mm dia. Each 9
82.00Providing & laying H.D.P.E pipes, pressure class 10kg/sq.m, including H.D.P.E fittings (excluding trenching, refilling &
thrust block), 75 mm.Each 16
83.00Providing & laying H.D.P.E pipes including H.D.P.E fittings pressure class 6kg/sq.cm(excluding trenching, refilling &
thrust block) -- 110 mm dia.Each 41
84.00 Constructing Soak Pit filled with brick bats including 100 mm S.W drain-pipe - As per the drawing. Each 2
85.00
Constructing Septic Tanks, in 2nd class brick masonry in cement mortar 1:4, including fittings, C.I cover with frame, 40
mm thick concrete flooring (40 mm aggregates) cement plaster concrete base in C.M 1:4:8 etc. complete as per standard
design - 50 users.
Each 1
86.00
Constructing Septic Tanks, in 2nd class brick masonry in cement mortar 1:4, including fittings, C.I cover with frame, 40
mm thick concrete flooring (40 mm aggregates) cement plaster concrete base in C.M 1:4:8 etc. complete as per standard
design - 15 users.
Each 1
L. DRAINAGE WORKS
87.00Providing and laying plinth protection 50 mm thk. complete including finishing the top surface smooth - with cement
concrete 1:3:6, 20 mm aggregate, laid over 100 mm thick layer of compacted gravel (40 mm).Sq.M 286
88.00
Construction of second class brick masonry open surface drain in cement mortar 1:4 including earth work in excavation
100mm thick concrete bed 1:5:10, 40 mm aggregate and 25 mm thick cement concrete 1:2:4, 12mm aggregate for filling
haunches including 12 mm cement plastering 1:4 with a floating coat of neat cement and disposal of surplus earth etc.
complete- 250 x 200 mm depth.
M 255
89.00
Const. Brick masonry manhole in CM 1:5, R.C.C top slab with 1:2:4 20 mm agg., fdn. PCC 1:4:8 40 mm agg.12mm
CP 1:3 finished with floating coat & making channels in PCC 1:2:4., 20 mm agg. neatly finished complete - as per the
drawing.
Each 5
90.00
Const. Brick masonry inspection chamber in CM 1:5, R.C.C top slab with 1:2:4 20mm agg., fdn. PCC 1:4:8 40mm
agg.12mm CP 1:3 finished with floating coat & making channels in PCC 1:2:4., 20mm agg. neatly finished complete - as
per the drawing.
Each 3
Page 12 of 13
Unit Price Total Price
1 2 3 4 (3x2)
Provisional
Quantity
SCHEDULE - 8 : SUPPLY & ERECTION FOR 66 kV GIS SUBSTATION AT DAMJI, GASA
UnitItem Description Erection Price
M. PAINTING
91.00Providing and applying one coat of primers of approved color and texture by the client on the eave board and eave ceiling -
pink primer.Sq.M 399
92.00Providing and applying two coats of synthetic enamel paint of approved color and texture by the client on eave board and
ceiling.Sq.M 399
93.00 Providing & applying one coat of primers ( on external wall surface) -Cement primer. Sq.M 385
94.00 Finishing wall with Water- Proof Cement Paint - New work, three coats ( on external wall surface). Sq.M 385
95.00Providing & applying finishing coats - Acrylic washable distemper, two coats on new work, including cement primer coat -
internal walls.Sq.M 318
96.00Providing, preparing and applying Sumdang Traditional Bhutanese painting (Washable) - Ding quality. (Rate quoted
should be able to cover the cost of applying paints to all the cornices, external window portions, etc.)Sq.M 773
N. FURNITURES
97.00 Control room
97.10 Arch Table for control room Each 3
97.20 Rotating chair Each 4
98.00 General office/record room
98.10 File rack Each 2
98.20 Medium Office working table consisting of : 1 office working table, 1 drawer cabinet, 1 side extension table Each 1
98.30 Executive rotating chair Each 1
98.40 Chair with arm rest with fabric Each 3
98.50 Writing table Each 3
98.60 Rotating chair Each 2
99.00 Guest room
99.10 Medium size beds with Mattress, pillows, quilts, etc Each 2
99.20 Wooden cupborads Each 2
99.30 TV set - 32 inch LED (Sony, Samsung) Set 1
99.40 Easy sofa double seater set consisting of one number double seater and two numbers single seater Set 1
99.50 Center table Each 1
99.60 TV cabinet simple with one drawer Each 1
99.70 Fridge (single deck), equivalent to 190 litres. Make to be approved by BPC Each 1
99.80 Rice cooker, Curry cooker and Water boiler. Make to be approved by BPC Set 1
99.90 Micro wave oven. Make to be approved by BPC. Each 1
99.10 Plate and cups set each 1
99.11 Dining table 4 Seater No. 1
99.12 Chair for dining table No. 4
Total Amount (Nu.)
Page 13 of 13