bharti automation bhspli gurgaon, haryana-122050 · bharti automation pvt. ltd. (a testing...

BHARTI AUTOMATION PVT. LTD.(A Testing Division) Bhspli

arlificial intelligence

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comcl N-u 29299RJ 1997 Pr COL3827

lssued To: Sample Description Date of Receipt: 26!0712019Date of Reportin 9i2410812019Subham Solar Solutions Pvt.Ltd.

R.S Plot No.l,Gulmakhari,PradhanNagar,Dist-Darjeeling,West Bengal

Solar PV Module 300WModel No.SSSPL300Series Model No.SSSPL0I 0,

sssPL075,sssPL150

TEST REPORT

PV Module Safety Qualifi cation Requiremen!91[q4qg!i!g

Report Reference lD No

Date of issue

Total number oI pages ....

Testing Laboratory

Address ...................

Bharti Automation Pvt, Ltd. (A Testing Division)

Ptot No- 354, Sector 7, IMT Manesar, Gurgaon ,Haryana-'122051

Subham Solar Solution Pvt. Ltd.

Office:83, Paul Building Complex, Bidhan Road, SiliguriFactory:

R.S Plot No.lGulmakhari, Pradhan Nagar,Dist: Darjeeling, West Bengal

Applicant's name

Address ................

Test specification:

Standard ..........................

Test procedure

Non-standard test method

tEC 61215:2005 /lS 14286:2010

N/A

N/A

Crystalline silicon terrestrial photovoltaic (PV) modules (lvlulti-crystalline)

Model/Type reference : SSSPL300

Ratings .............................................: For the electrical rating for all models seetable

Manufacturer declared that all the modules from 10W to 300W; they are using the same mbox. Junction box also will be complying as per the requirements.

Test item description

@

aterial, except the jun

Trade Mark

Product Electrical Rating

Asholi GisAnalyst

TRN No.

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.

2. Totalliability ofour Lab is limited to the invoiced amount.

3. Samples will be destroyed after 3 months from the date of testing un less otherwise specified.

4. This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertising media without our special permassion in writing.5. Report refer fo the sample submatted to us and not drawh by Bha rti Automation Pvt. Ltd unless menti6ned otherwise.

111033

TEST REPORT

190726009

24t08t2019

20

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N-u29299RJ1997PTCo13827

BHARTI AUTOMATION PVT. tTD.(A Testing Division)


SSSPLOTS,SSSPLl50

Samp le Description:

ID: 190726009 Page o

Copy of marking plate

@EJ-ra,tn n-a' p.ul 8lllldrng CsnPl'r' 1d Flor' $neud-7i'@1:'- w.a B.rl.l' lndl'

ar src {1ootivr/l'!2, aM a-S SPGGtth, call T..?!rcr.tr.e 25 D.E- tEatistaa.l,l vaiucs .re rrotrllnal uttleis

M.xi m.,rn Pouror (PrnPdesllned as te3ted.

3(,(, .OO rl/l,P37.51 r,t-q, a/rs-oo v

\/olt.tt .t Mat. FowarC.,racftl ,t Max. Poilrcr

(Wrrr p)(trop)

a-56 A15A1000 vDc24OO pacrass AcLAss I t

rr.azq.KE'It\f I l\l r-I/A

ISt

TRN No.

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.

1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is nei

2. Totalliability of our Lab is limited to the invoiced amount.

3. Samples will be d estroyed after 3months from the date of testing u nless otherwise specified.

4. This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law

any advertising media without our special permission in writing.

5. Report refer to the sample submitted to us and not drawh by Bha rti Automation Pvt. Ltd unless menti6ned

oDeri cii'c.tIt vott.Scsliort Clrcrrit Curr.m

(voc){ lsc}

rizcd Sigqt r103 E

@

\/4 -\ -.';\ /therlh€Jrtsrei@)i%d.

and should not be used in

otherwise.

! t' i.rt n it. t t atLl rltt. hdlrlc-

N/A-Possible test case verdicts: - test case does not apply tothe test object ......................,..:

Pass (P)

Fail (F){est object does not meet the requirement

Module type Crystalline Solar Photo VoltaicShort CircuilCurrentat STC, (Adc)

Rated MaximumPower

at STC,(Watts)

MaximumSeries Fuse,

(A)

RatedCurrent at

STC, (A DC)lvlodel

Open CircuitVoltage atSTC, (V

dc)

RatedVoltage at

STC, (V dc)

10.22 10600 0.552 0.6022.15 18.57SSSPLOl O

104.07 4.33 75.1222.21 18.42 1000SSSPLOT5150 158.20 8.7722.09 '!8.00 1000QSSPL150

/<300'1 000 7 .97 8.81SSSPL3OO'rrd/It'-. 44.36 37 .4

Bhspliartificial intelligence

TEST REPORT

lssued To:

Subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulmakhari,PradhanNagar,Dist-Darjeeling,West Bengal

Date of Receipt: 2610712019

Date of Reportin 9:2410812019

wanll GELECTNICAL,HAZTND

> tri .rl a!fi. .6t ry {n 4d, r .tlt*.! .rritl' '3El ''i td't-r> 6l' a!.ftn.d !r-n $ rd hiJl & itt!*6 fid. -d" wr 6 tt'r Bo'uti> a. ArrLE d rt-!t-! hlth OC tdr.r. *t- 6"!lG d

'6t*l.d rn De

> to rr nrdh r inill tdd.t fttl $t n {4.

- test object does meet the requirement...

MaximumSystem

Voltage,(Vdc)

bl,l{x,6-\ r

Asholi Giri

artificial intelligence

TEST REPORT

BHARTI AUTOMATION PVI. LTD.(A Testing Division)

lssued To Sam le Descri tion Date of Receipt: 2610712019

Date of Reportin 9:241 081 2019Subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulmakhari,PradhanNagar,Dist-Darjeeling,West Bengal


SSSPLOT5,SSSPLl5O

ID: 190726009 of20

Description of module construction:Sample Random sampling f.om production

Module

Froni Cover Glass-EVA-Cell-EVA

Rear Cover Tedler

Frame Extruded aluminum, anodized

Dimensions (lx w x h) [mm]1960x990x40

Module area [m2l 1 .9404 m'

Minimum distance between current- carrying partsand module edge Imml

35.00 mm

Cell

Cell (include type) MSPVLM2P5

Cells (l x w) [mm] 156 x 156

Cellthickness [!m] 214

Cell area [cm2] 243.36

Number of cells 72Components and other

Cells Der bvpass diode

TyDe of bvpass diode 15 SQ045 MtC

No. of bypass diodes 3

Cell- and strinq connectors. Solder plated copper ribbons

Junction box Type BKT-PV-J84, Manufactured by BKT, Rated '1500 V dc, certified byCENEC

Cable PVC-F, Manufactured by ERXL SOLAR DC CABLE,4.00 Sq. mm, Rated1100 v Sunlight resiatant, certified by TUV.

type Helios H4, Manufactured by BKT, Rated 1000 V dc, 35 Amax, with 12 AWG cable certified by TUV.

Connectors

Adhesives (frame) ., PV 804

N/A

$ttrersr\ ttit

TRN No.

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is n

2. Total liability ofour Lab is limited to the invoircd amount

3. Samples willbe destroyed after3months from the date oftesting unless otherwise specified.

either in



5. Report refer io the sample submitted to us and not drawh by B ha rtiAutomation Pvt. Ltd unless mentibned otherwise.

111C3

mplied

BhspiPlot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:91-124-4040815e-mail :[email protected] :www.bhartiautomation,comct N-u29299 RJ 1997 PT COL3827

PV 804Adhesives Uunction box)

Potting material (.junction box) .........: -rii,rF;\The 1SOOV rating certificate from TUV tor iunction y'.o$libte ano . )connector are provided by the client. 'L/*^-._^...,-_^.t_

Asholi Giri

BHARTI AUTOMATION PVT. LTD.(A Testing Division)

artiticial intelligence

TEST REPORT

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comcf N-u29299 RJ 1997 Pr CAr3a27

issued To Sample Description:Subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulmakhari,PradhanNagar,Dist-Darjeeling,West Ben gal


SSSPLOT5,SSSPLl50

oI20

Testing procedureNew module type

'1) Modification(if yes, please choose the applicable modiflcalion according to the Retesting Guideline)

2) Change in cell technology3) Modiflcation to encapsulation system

4) Modification to super strate5) lncrease in module size6) Modification to back sheeusubstrate7) Modification to frame and /or mounting structure8) Modification to junction bol:/ electrical termination9) Change in cell interconnect materials or technique10) Change in electrical circuit of an identical package11) Higher or lower power output (by 10%) in the identical package including size and using the identical

cell process12) Qualification of a frameless module after the design has received certification as a Aamed

module13) Change in bypass diode or number of diodes

Module group assignment:

Sample Sample Group lD Sample Si N

1 szE4190200217

2 B s2EA190200130

3 c1 s2EA190200131

4 c2 s2EA190200139

7 D,I 01112019200423

8 D2 01112019200422

trt 0't 112019200236

6 E2 01112019200479

uthorizcd SignaAlralyst

TRN No. t1103;NABL Accredited and ISO 9000:2015 certified Testing Laboratory.

Bhsgi

Date of Receipt: 2610712019Date of Reportin 9:24108120'19

ID: 190726009

1. The results listed refer only to tested samples and applicabie parameters. Endorsement of product is neither inferred nor implied.2. Totalliability of our Lab is limited to the invoiced amount.

3. 5a m ples will be destroyed after 3 mo nths from the date of testing u nless otherwise specified.4. This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any adve rtising med ia without our specia I pe rm issio n in writing.

5. Report refer t6 the sample submitted to us and not drawriby B ha rtiAutom ation Pvt. Ltd unless mentiohed otherwise.

BHARTI AUTOMATION PVT. LTD.(A Testing Division) Bh6gi

arlaf icial ;ntelligence

TEST REPORT

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N-u 29299 RJ 1997 P'r COL3827

Issued To: Sample Description: Date of Receipt: 2610712019Date of Reportin 9:241Q812019Subham Solar Solutions Pvt.Ltd.

R.S Plot No.1,G ulmakhari,PradhanNagar. Dist-Darieeling,West Bengal

Solar PV Module 300WModel No.SSSPL300Series Model No.SSSPL010,SSSPLOT5,SSSPLl5O

ID: 190726009 of 20

Clause Requirement * Test Verdict

MARKING P

Name, monogram or symbol of manufacturer Subham Solar Solutions Pvt. Ltd

Type or model number SSSPL3OO

300 Wp - Maximum output power

P - PolycrystallineP

Serial number szEA190200217 P

Polarity of terminals or leads Positive and Negative P

Maximum syslem voltage 1000

The date and place of manufacture 02t2019

uthorizcrlAsholr Giri

.\nah st

TRN No,

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Totalliability ofour Lab is limited to the invoiced amount.

3. Sa mp les will be destroyed after 3months from the date of testing un less otherwise specified-4. This report js not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertising media without our special permission in writing.5. Report refer t6 the sample submitted to us and not drawri by Bha rti Automatio n Pvt. Ltd unless menlioned otherwise.

Result - Remark

4

P

P

t1103:


artificial intelliqence

TEST REPORT

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comcl N-u29299RJ 1997 PT COL3a27

Samp le Description: Date of Receipti 2610712019Date of Reportin 9:2410812019Solar PV Module 300W

Model No.SSSPL300Series Model No.SSSPL0I 0,

SSSPLOTS,SSSPLl5O

lD:190726009 of20

Requirement + Test Result - Remark Verdict

lnitial examination

10 Preconditioning P

10.1 Visual inspection See table 10.1 lnitial P

10.2 Maximum power determination P

1 0.3 P

10.15 See table 10.15lnitial P

Group A Control l\ilodule Sample Group A

Group B

10.4 Measurement of temperature coefficients See table 10.4 B P

10.5 Measurement of Nominal Operating Cell TemperaturelNocT.'c1 ..................................... :

See table 10.5 B P

10.6 See table 10.6 B P

'10.18 Bypass diode thermal test See table 10.18 B P

Maximum allowed junc{ion temperature P

P

uthorized Signnalyst

NABL Accredited and ISO 9000:2015 certified Testing Laboratory ng

1. The results listed refer only 10 tested samples and applicable parameters, Endorsement of product is neither inferred nor implied.2. Totalliability ofour Lab is limited to the invoiced amount.

3. Samples will be destroyed after3months from the date oftesting unless otherwise specified.4 This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertising media without our special permission in writing.5. Report referto the sample submitted to us and not drawn by Bha rtiAutomation Pvt. Ltd unless mentioned otherwise.

Bh36i

lssued To:

Subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulrnakhari,PradhanNagar,Dist-Darjeeling,West Bengal

Clause

All modules

See table 10.2 lnitial

lnsulation test See table '10.3 lnitial

Wet leakage current test

'1 Module Sample Group B

Performance at STC and NOCT

Measured junction temperature

rRN No. 1 : I t'

BHARTI AUTOMATION PVT. TTD.(A Testing Division)


TEST REPORT

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:9L-124-4O4OBLS

e-mail :[email protected] :www.bhartiautomation.comct N-u29299RJ 19 97 PT COL3827

issueci To: Sam le Descri tion:Subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulmakhari,PradhanNagar,Dist-Darjeeling,West Ben gal


SSSPLOT5,SSSPLl50

ID: 190726009

Clause Requirement + Test Result - Remark Verdict

2 Modules Sample Group C P

10.1',| Thermal cycling test (50 cycles) P

Final measurements See appended table 10.'11 C P

10.12 Humidity freeze (10 cycles) P

See table 10.12 C P

Group Cl 1 Module Sample Group C'l P

10.14 Robustness of terminations test P

Final measurements See table 10.14 C1 P

Group E 2 Modules Sample Group E P

10.1 3 Damp heat test P

Final measurements See table 10.'13 E P

Group E1 1 Module Sample Group E1 P

10.16 Mechanical load test 2400Pa P

'10.16.4 -No open-circuits or ground faults detected No open circuit P

Final measurements See table 10.16 E1 P

l lvlodule Sample Group E2 P

10.17 P

11 P

Final measurements See table 10.17 E2 P

Final measurement K\f)Wet leakage current test /<,/tq/See table 10.15 F P \

nalyst

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.1. The results listed refer only to tested samples and applicable parameters, Endorsement of product is neither infer re nor implied.2. Total liability ofour Lab is limited to the invoiced amount.

3. Samples will be destroyed after3months from the date oftesting unless otherwise specified.4. This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertjsjng media without our special permission in writing.

5. Report refer tb the sample submitted to us and not drawn by Bha rtiAutom ation Pvt. Ltd unless menticjned otherwise.

Bhspli

Date of Receipt: 2610712019Date of Reportin 9:2410812019

of 20

Group C

Final measurements

I

Hail test

Number of points impacted.

I

lvnr-bAII modules

10.15

rRN No. 1j 1 C I i,



TEST REPORT

Plot No.354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :info@bhartiautomation,€omwebsite :www.bhartiautomation.comcl N-u29299 RJ 1997 PT COL3A27

lssued To Sample Description: Date of Receipt: 2610712019

Date of Reportin 9:2410812019subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulmakhari,Pradhan\agar,Dist-Darjeeling,West Bengal


Requirement * Test Result - Remark Verdict

10.'l lnitial TABLE: Visual inspection (lnitial) P

Test Date 27t07t2019

Sample Nature and position of initial findings - comments or attach photos

I No Visible Defect Pass P

2 No Visible Defect Pass P



5 No Visible Defect Pass6 No Visible Defect Pass P



Supplementary information: -

10.2 lnitial TABLE: Maximum power determination (initial) P


Module temperature

lnadiance [Wm2)'1000

Sample Voc [V] Vmp [V] lsc [Al lmp [A] Pmp [W] FF t%l1 45.9 38.8 L79 8.24 319.5 79.2

79.22 38.3 8.75 8.25 315.63 8.67 314.64 45.6 38.6 8.69 8.22 317 .0 80.05 45.8 38.0 8.25 78.46 45.9 38.0 8.75 314.6 78.47 8.78 8.30 78.78 38.3 8.76 8.28 3't7.4

Su lementa information: -

nltst

TRN No.

NABL Accredited and ISO 9000:2015 certified Testing Laboratory

::i

Bhsrti

lD:190726009 of20

Clause

P

45.645.6

8.71 313.2

45.8 38.1 316.246.1

'/' \

1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor impl;ed.2. Totalliability of our Lab is limited to the invoiced amount.

3. Sa m ples will be destroyed after 3months from the date of testing u nless otherwise specified_

4 This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertising media without our special permission in writjng.

5. Report refer tb the sample submitted to us and not drawriby Bha rtiAuto matio n Pvt. Ltd unless mentioned otherwise.

BHARTI AUTOMATION PVT. LTD.(A Testing Division) Bh6gi

artilicial intelligence

Plot No.354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:91-124-4040815e-mail :[email protected] :www.bhartiautomation.comclN-u29299RJ 1997PTCo13827

lssued To Date of Receipt-. 2610712019Date of Reportin 9:2410812019Subham Solar Solutions Pvt.Ltd.

R.S Plot No.l,Gulmakhari,Pradhaniiagar, Dist-Darjeeling,West Bengal

ID: 190726009 of20

Requirement * Test Result - Remark Verdict

10.3 lnitial Table: lnsulation test (initial) P

Test Date 30t07 t2019

Test Voltaqe applied [Vj 3000 for 1 min. / '1000V for 2 min

Sample Measured Required Dielectric breakdown Result

MO MO1 >20.62 NO PASS

>20.62 20.62 NO PASS3 >20.62 20.62 NO PASS4 >20.62 20.62 NO PASS5 >20.62 20.62 NO PASS6 >20.62 20.62 NO PASS7 >20.62 20.62 NO PASSI >20.62 20.62 NO

Supplementary information: Size of module [m1: 1.94

10.15lnitial TABLE: Wet leakage current test (lnitial) P

30t07 t2019

Test Voltaqe applied [V] 1000

Required Measured

3280

Solution resistivity [0 cm]

< 3,500 O cm at 22 !3'C0.027 PSurface tension [Nm-2] <003Nm2at22+3"C

Solution temperature ["Cl 24.5

Sample Measured [MQI Limit [MO] Result1 50.56 20.62 PASS2 45.65 20.62 PASS3 48.62 20.62 ,,< PASS4 65.89 20.62 PASS

20.62 q PASS6 40.25 20.62 . PA$S

55.45 20.62 "treB$'"'20.62 PASS50.33I IETRN No.

cc re e an ce te est tng oratory.1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Totalliability of our Lab is limited to the invoiced amount.

3. Sa m ples will be destroyed after 3 months from the date of testing u nless otherwise s pecified.

4. This report is not to be reproduced.wholly or ln part and cannot be used as a n evidence in the court of Law and should not be used in

any advertising media without our special permission in writing.5. Report refer tb the sample submitted to us and not drawn by Bharti Auto matio n Pvt. Ltd unless menticjned otherwise.

TEST REPORT

Sample Description:Solar PV Module 300WModel No.SSSPL300Series Model No.SSSPLci 0,

SSSPLOT5,SSSPLl5O

Clause

20.62

PASS

Test Date.

P

5 45.61

7

BHARTI AUTOMATION PVT. tTD.(A Testing Division) Bhsli


Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N-u 29299RJ 1997 PT COL3827

issued To Samp le Description Date of Receipt: 2610712019Date of Reportin 9:2410812019Subham Solar Solutions Pvt. Ltd.

R.S Plot No.1,G ulmakhari,PradhanNagar, Dist-Darjeeling,West Bengal


ID: 190726009 of 20


10.48 TABLE: Measurement of temperature coefficients P

Test Date

Ambient air temperature ["C] 25.5

lrradiance Wm2l '1000

Module temperature ["C] 68.3

Sample Parameter Calculated Value

2 q lo/ol"C\ . 0.0550

2 ts t%fc) -0.3936

2 6l%fc) -0.5505

Supplementary information

10.58 TABLE: Measurement of Nominal Operating Cell Temperature INOCT, 'C) P

0310812019 05t08t2019

Wind velocity [m/s] high/ low 1.74tO.27 1 .7 4t0.28 1.7410.28

Ambient temperature ["Cl high/ low 24.8t19.6 25.8t17.9 25.1t16.5

lrradiance Wm2] high/ low 954.791582.32 991.821518.67

Module temperature ['Cl high/low 55.9/36.05 57.1t38 56 65t33

Wind velocity Im/sl(averaqe) 0.903 0.822 0.945

Ambient temperature ['C] (average) 22.77

NOCT correction factor ['C] Nit Nit

Calculated NOCT fCI 47 .04 47.74 P

Sample Average NOCT ['Cl46.67 P

Supplementary information: Aftach correction procedure and origin of module l-V correction parameters

uthorizcd Sign:rt

TRN No.

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.

TEST REPORT

01t0812019

Test Date. 07t08t2019

941 .46t522.79

22.809 21.4

Nit

45.94

1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Totalliability of our Lab is limited to the invoiced amount.

3. Sa m ples will be destroyed after 3 months from the date of testing u n less otherwise specified.4 This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertising media without our special permission in writing.5. Report referto the sample submitted to us and not drawn by B ha rtiAutomation Pvt. Ltd unless mentiohed otherwise.

BHARTI AUTOMATION PVT. TTD.(A Testing Division) Bhs6i

artiflcial intelligence

TEST REPORT

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:91-124-4040815e-mail :[email protected] :www.bhartiautomation.comcl N-u 29299 RJ 1997 Pr COL3A27

Sample Description D.ile of Receipt: 2d4712019Daie of Reportin 9:2410812019Solar PV Module 300W

Model No.SSSPL300Series Model No.SSSPL0I 0,

SSSPLOT5,SSSPLl50

ID: 190726009Clause Requirement + Test Result - Remark Verdict

tl of20

't0.6 B TABLE: Performance at STC and NOCT P

07t08t2019

Wind velocity [m/s]Test method indoor

Ambient air temperature ['C] 25.5

lrradiance M/m'?l high/low 1000/800

Module temperature ['C] high/low

Condition Voc fvl Vmp [V] ,sc [A] lmp [A] Pmp [W] FF [o/ol

45.6 7 .25 315.6

NOCT 35.3 8.21 7.01 302 65Supplementary information

Ashol< Girithorized Sign.\llalJ"st

TRN No.

. NABL Accredited and lS0 9000:2015 certified Testing Laboratory.1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Totalliability ofour Lab is limited to the invoiced amount.

3. Sa m ples will be destroyed after 3months from the date of testing u n less otherwise specified.4. This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertising media without ourspecial permission in writing.5. Report refertd the sample submitted to us and not drawn by B ha rti Automation Pvt. Ltd unless mentioned otherwise.

Issued To:

Subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulmakhari,PradhanNagar, Dist-Darjeeling,West Bengal

Test Date.

46.9t25.1

STC 79.2

BHARTI AUTOMATION PVT. tTD.(A Testing Division) Bhspli


TEST REPORT

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N -u29299 RJ 1997 PT C0 L3827

issued To: Sample Description: Date of Receipt: 2610712019Date of Reportin g:?41A812019Subham Solar Solutions Pvt.Ltd.



SSSPLOT5,SSSPLl5O

ID: 190726009CIause Requirement * Test Result - Remark Verdict

12 of20

10.1.t c TABLE; Thermal cycling 50 test P

Test Date O2l OBl20 1 9 lo 1 31 08120 1 ITotal cycles (50) 50

Sample Open circuits (yes/no)

3 P

4 No P


(10.1 Visual inspection after thermal cycling 50 test) P

Test Date

Sample Nature and position of initial findings - comments or attach pholos

3 No Visual Defect Pass P4 No Visual Defect Pass P


(10,2 Maximum power determination after thermal cycling 50 test) P


Module temperature ["C] 25

lrradiance w/m'z)Sample # Voc [V] Vmp [V] lsc lAl lmp [Al Pmp [W FF I%I

3 45.6 8.67 8.21 314.6 79.64 8.69 8.22 317.O 80.0

Pmp degradation after this testl%l<5ol.. 075 125


({0.3 lnsulation test after thermal cycling 50 test)13lO8DO19

Test Voltage applied MRequired Dielectric breakdown

t\ro MO No\3 >20.62 20.62 qNO / pass \

>20.62 20.62 NO , "^-,.,P.aso'^-.-".

information: Size of module 1.94

TRN No.

No

13tO4t2019

1000

45.6 38.6

P

Test Date

3000 (for 1 min) 1000V for 2 min

lvleasuredSample #

4

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.l The results listed refer only to testird samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Totalliability ofour Lab is limited to the invoiced amount.3. 5a m ples will be destroyed after 3months fro m the date of testing un less otherwise specified.4. This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

a ny advertising med ia without our s pecia I pe rm ission in writing.5. Report refer to the sample submitted to us and not drawri by BhartiAutomation Pvt. Ltd unless mentiohed otherwise.

BHARTI AUTOMATION PVT. LTD.(A Testing Division) Bhs6i


Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N-u 29299RJ 1997 PT COL3827

issued To Sample Description D.:te of Receipt: 2 A712019Date of Reportin 9:2410812019Subham Solar Solutions Pvt.Ltd.


Solar PV Module 300WModel No.SSSPL300Series Model No.SSSPL010,SSSPLOT5,SSSPLl sO

ID: 190726009C lause Requirement * Test Result - Remark Verdict

e 13 of 20

10.12 C TABLE: Humidity freeze 10 testTest Date [[r l,4/DD/yYfY] start/end I 4|OA2A 19 ro 24 I 08120 1 ITotal cycles (10) 10

Sample Open circuits (yeslno)

NO

4 NO

Supplementary information: --

{10,1 Visual inspection after humidity freeze l0 test} P



No Visual Defect Pass P

4 No Visual Defect Pass P

Supplementary information: -(10.2 Maximum power determination after humidity freeze {0 test} P


Module temperature I"Cl.lrradiance {Wm2) 1000

Sample Voc lVl Vmp [V] lsc [A] lmp IAI Pmp IWI FF I%I3 45.6 8.67 8.21 314.6 79.64 45.6 38.6 8.69 8.22 317.0

Pmp degradation after this test [%] <5% 1.21 1 .71 P


(10.3 lnsulation test after humidity freeze 10 testl P

Test Date 24108t2019

Test Voltage applied M 3000 (for 1 min) '1000V for 2 min

Sample Measured

MO

MeasuredMO

IIA

3 102 20.82 NO PASS I

4 20 62 NO t},^.i',P"SS-S"""Jinformation: Size of module 1.54

alvst

TRN No.

NABL Accredited and ISO 9000:2015 certified Test;ng Laboratory.l The results listed refer only to tested samples and applica ble parameters, Endorsement of product is neither inferred nor implied.2. Total liability ofour Lab is limited to the invoiced amount.


any advertising media without our special permission in writing.5. Report refer to the sample submitted to us and not drawn by B h a rti Automation Pvt. Ltd unless mentioiled otherwise.

TEST REPORT

P

3

3

80.0

ADielectric breakdown

No,E/

101

Bhs6i

TEST REPORT

Sample Description: Date of Receipt: 2610712019

Date of Reportirlg:241 0812019Solar PV Module 300W

Model No.SSSPL300Series Model No.SSSPLCi 0,

SSSPLOT5,SSSPLl5O

ID: 190726009 of20

Requirement + Test Result - Remark Verdict

P10.14 C1 TABLE: Robustness of terminations tesl

Test DatePType C: connectorTypes of terminations

Applied force in all directions INI 0.5

PSample Open circuits (yes/no)

3

Supplementary informalion: -P(10,1 Visual inspection after robustness of terminations test)

24t08t2019Test Date


3 No Visible Defects Pass


(10.2 Maximum power determination after robustness of terminations test)

Test Date 24/08t2019

Module temperature I"Cl1000lrradiance w/m2)

lsc [Al lmp [A] Pmp [W] FF lyolSample Voc [V] vmp [v]236.806 73.437.680 29.891 7.922

1.27Pmp degradation after this lestl%lss%


(10.3 lnsulation test after robustness of terminations test)24t0812019Test Date3000 (for 1 min) 1000V for 2 minTest Voltage applied M

Dielectric breakdownMeasured Required Result

MO MO No

Sample

PASS20.62 NO3 2350

Supplementary information: Size of module (m'?): 1.94

nrl)st

TRN No. '

NABL Accredited and ISO 9000:2015 certified Testing Laboratory1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.

2. Totalliability of our Lab is limited to the invoiced amount.

3. Samples will be destroyed after3months from the date oftesting unless otherwise specified.



5. Report refer io the sample submitted to us and not drawh by tharti Automatio n Pvt. Ltd unless mentioned otherwise.


artirlcial intelligence

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N-u 29299RJ 1997 PT C0L382t

lssued To:

Subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulmakhari,Pradhani!a ga r,Dist-Darjeelin g,West Bengal

Clause

24t0812019

No

P

8.5113

P

BHARTI AUTOMATION PVT. tTD.(A Testing Division) Bhspli

adificial intelligence

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N-u 29299RJ 1997 PT COt3827

Sample Description: Date of Receipt: 2610712019Date of Reportin 9:2410812o19Solar PV Module 300W

Model No.SSSPL300Series Model No.SSSPL0i 0,

SSSPLOT5,SSSPLl5O

lD:190726009CIause Requircment * Test Result - Remark Verdict

P 15 of20

10.16 E1 TABLE: Mechanical load test P

Sample 7

Test Date

l\rounlino method As per lnstallation ManualLoad applied to Front side Back sidel,rechanical load IPal 2400 2400First cycle time (starUend) 09:00AM/10:00AMlntermittent open-circuit (yes/no)

Second cycle time (slaruend) 12:00PlI/01:00PMIntermittent open-circuit (yes/no) NOThird cycle time (starvend) 1:30PM/2:00PIvllntermitient open-circuit (yes/no) No

Supplementary information: Such as Maximum bending at module center(10.1 Visual inspection after mechanical load test) P

06i082019

Sample Nature and position of initial findings5


(10.2 Maximum power determination after mechanical load test) P

Test Date 06/08/2019

Module temperature I'Cllrradiance {W/m2) 1000

Sample Voc [Vl Vmp fvl lsc [Al lmp IAl Pmp lWl FF I%1

7 45.8 38.1 8.78 8.30 78.7

Pmpde gradation after this test[%]<s% 1.17


(10.3 lnsulation test after mechanical load test) P

Test Date

Test Voltage applied IVIlMeasured Required Dielectric breakdown\Sample

MO MO No

7 102.3 20.62 NO

S ta information: Size of module 1.94

rnalyst

TRN No.

NABL Accredited and ISO 9000:20L5 certified Testing Laboratory.l The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor im plied.

2. Total liability ofour Lab is limited to the invoiced amount.


any advertising media without our special permission in writing.5 Report refer to the sa m p le sub mitted to us a nd not d rawn by Bha rti Autom ation Pvt. Ltd un less mentiohed otherwise.

TEST REPORT

lssued To:

Subham Solar Solutions Pvt.Ltd.R.S Piot No.l,Gulmakhari,PradhanNagar,Dist-Darjeeling,West Ben gal

06/08/2019

NO

Test Date

No Visual Defect Pass P

o6toat2019

3000 (for 1 min) 1000V for 2 min Ithesurt

,11

BHARTI AUTOMATION PVT. tTD.(A Testing Division) Bh66i

artiticial intelligence

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N-u 29299RJ 1997 PT COL3827

lssued To: Sam le Descri tion DaLe of Receipt: 2610712019

Date of Reportin 9:2410812019Subham Solar Solutions Pvt.Ltd.R.S Plot No.1,G ulmakhari,PradhanNagar,Dist-Darjeeling,West Bengal

Solar PV Module 300WModel No.SSSPL300Series Model No.SSSPL01C,SSSPLOT5,SSSPLl5O

ID: 190726009 of20


TABLE: Hail impact test P

Test Date 06lo8t2a19

lce ball size lmmj 24.9

lce ball weight [g] 7.5324 14lce ballvelo m/s

Number of impact locations 11

Sample Open circuits (yes/no)

B NO

Supplementary information: (impact location descriptions)

('10,1 Visual inspection after hail impact test)06/08/2019


I No Visible Defect Pass P


(10.2 Maximum power delermination after hail impact test) P

Test Date 06/08/2019

Module temperature ['C] 24.2

lrradiance w/mz)Sample Voc lvl Vmp [V] Isc lAl lmp JAI Pmp [W] FF I%I

8 46.1 8.76 317.4 78.6'1.39Pmpde gradation after this test [%]ssolo


P(10-3 lnsulation test after hail impacl test)Test Date 06/08/2019

Test Voltaqe applied M 3000 (for 1 min) 1000V for 2 min

Measured Required Dielectric breakdownSample #MO MO No /.\s 99.2 20.62 NO / P."t \

leme information: Size of module 1.94Salvstll

TRN No.

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Total liability ofour Lab is limited to the invoiced amount.


any advertising media without our special permission in writing.5. Report refertb the sample submitted to us and not drawri by Bha rti Autom ation Pvt. Ltd unless menticjned otherwise.

TEST REPORT

10.17 E2

P

P

Test Date..

1000

BHARTI AUTOMATION PVT. LTD.(A Testing Division) Bhsrti


TEST REPORT

Plot No.354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comct N-u29299RJ 1997 PT CO!1A27

lssued To: Sam le Descri tio n Daie of Receipt: 2610712019

fi=te oi Reportin g:2414U2019Subham Solar Solutions Pvt.Ltd.R.S Plot No.l,Gulmakhari,PradhanNagar,Dist-Darjeeling,West Bengal


SSSPLOT5,SSSPLl5O

ID: 190726009 oI20

Clause Requirement + Test Result - Renrark Verdict

10.2 F TABLE: Maximum power determination (final) P

Test Date 24t08/2019

Module temperature ["C]

1000

Sample # Voc [V] Vmp [V] lsc [A] lmp [A] Pmp Wl Degradationl%1

Limit [%]

1 37 .465 8.463 7.936 237 .813 0 -8

2 37.39 29.3 8.46 7 .84 73 229.85 3.07 I3 37.611 29.822 8.523 7 .925 7 3.7 236.325 1.48 -8

4 8.530 7 .920 72.9 233.519 1 .92

5

6

7 72.5 230.643 4.41 -8

I 37 .209 29.036 8.532 7 .876 72.O 228.695 -8


ualvst

33TRN No.

lrradiance [W/m2)...

FF lo/o1

29.966 75

37.575 29.485 -8

37.181 29.301 8.562 7 .8720.46

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Totalliabilityof our Lab is limited to the invoiced amount.

3. Samples will be destroyed after 3months from the date of testing u nless otherwise specified.4. This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertising media without our special permission in writing.5. Report refer tb the sample submitted to us and not drawn by Bharti Automatio n Pvt. Ltd unless mentic,ned otherwise.


TEST REPORT

lssued To: Date of Receipt: 2610712019Date of Reportin 9i2410812019Subham Solar Solutions Pvt,Ltd.

R.S Plot No.l,Gulmakhari,Pradhani.:agar,Dist-Darjeeling,West Ben gal

ID: 190726009 of 20

C lause Result - Remark Verdict

10.15 F TABLE: Wet leakage current test (final) P

Test Date 24/08t2019

Test Voltage applied [Vl 1000

Required

Solution resistivity [O cm) < 3,500 Q cm at 22 13"C 2450,',t730,3345,3200

P

Surface tension [Nm'2) < 0.03 Nm-z at 22 a3"C 0.03,0.029 P

Solution temperature ['C] 23.5, 22.2, 23.3, 23

Sample # Measured [MO] Limit [MO] Result

1 118 20.62 PASS

2 113 20.62 PASS

98 PASS

4 '100 PASS

5 109 20.62 PASS

6 129 PASS

7 '1 15 20.62 PASS

8 PASS

thorized Signa

AMo

o-{t

5q

* *

1. The results Iisted refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Totalliability of our Lab is limited to the invoiced amount.

3. Samples will be destroyed after3months from the date oftesting unless otherwise specified,



5.. Report refertb the sample submitted to us and not drawn by BhartiAutomation Pvt. Ltd unless mentidned otherwise.

Bh36iartificial intelligence

Plot No.354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :www.bhartiautomation.comc I N - U 29299 R J 1 9 97 PT C0 L3827

Sample Description:Solar PV Module 300WModel No.SSSPL300Series Model *o.555PLi:i 0,

SSS PLO75,SSSPLl 5O

Requiremenl + Test

[reasured

3 20.62

20.62

20.62

114 20.62

Supplementary information: Size of module [m']: '1.94

Analyst

rRNNo. I ; , I j.,NABL Accredited and ISO 9000:2015 certified Testing Laboratory.


Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.:91-124-4040815e-mail :[email protected] :wwubhartiautomation.€omct N-u 29299RJ 1997 Pf COL3A27TEST REPORT

!ssued To: Sample Description: Date of Receipt: 2610712019Date of Reportin gi24l08l2019Subham Solar Solutions Pvt.Ltd.


Solar PV Module 300WModel No.SSSPL300Series Model No.SSSPL010,SSSPLOT5,SSSPLl50

ID: 190726009 of 20

Photographs

Sample Front Veiw sample Back Veiw

.,\nalyst

TRN No.

.\uthorized Signat0

NABL Accredited and ISO 9000:2015 certified Testing Laboratory. 'i:lgl/--'1. The results listed refer only to tested samples and applicable parameters. Endorsement of product is neither inferred nor implied.2. Totalliability ofour Lab is limited to the invoiced amount-

3. Samples will be destroyed after 3months from the date of testing u nless otherwise specified.4. This report is not to be reproduced wholly or in part and cannot be used as an evidence in the court of Law and should not be used in

any advertising media without our special permission in writing-5. Report referto the sample submitted to us and not drawn by B ha rtiAuto mation Pvt. Ltd unless mentiohed otherwise.

Bhzgiartiticial intell;gence

\

it

l'

Fr {$rFE

BHARTI AUTOMATION PW. tTD.(A Testing Division)

Plot No. 354, Sector-7, IMT ManesarGurgaon, Haryana-122050Ph.: 91-124-4040815e-mail :[email protected] :wwwbhartiautomation.comct N-u 29299 RJ 1997 PT COL3827TEST REPORT

issued To Samp le Description:Subham Solar Solutions Pvt.Ltd.R.S Plot No.'l,Gulmakhari,PradhanNagar,Dist-Darjeeling,West Bengal


ID: 190726009 Prge 20 of 20

#

Terminal Box Connectors

isclaimer: The manufacturer declares that the lower rating modules are constructed using same materials,components and processes as the tested modules. Test results apply only to the sample(s) actually testedby Bharti Automation Pvt. Ltd. The applicant provided all ofthe test samples for testing by Bharti. Bharti didnol select the samples or determine whether the samples provided werc representative of other productsmanufaetured by appli6ant. Bharti has not established Follow-Up Service or other surveillance of theproduct. The applicant is solely responsible for continued compliance of products to all applicablestandards..

Test Report**'

A-uthorizcd Signa ol-\'

NABL Accredited and ISO 9000:2015 certified Testing Laboratory.1. The resu lts listed refer only to tested sa mples a nd applica b le pa ram eters. Endorsem ent of prod uct is ne ither inferred nor im plied.

2. Total liability ofour Lab is limited to the invoiced amount.

3. Sa m ples will be destroyed after 3 months fro m the date oftesting un less otherwise specified.



5. Report refer io the sample submitted to us and not drawh by Bha rtiAutomation Pw. Ltd unless mentidned otherwise.

Bhspliartilicial intelligence

Date of Receipt: 2 A712019

Date of Reporiirtg:241 0Bl 2019

Asho!r GiriAnalyst

TRN No. . , l

bharti automation bhspli gurgaon, haryana-122050 · bharti automation pvt. ltd. (a testing...

Documents