Belting Leather Product Information

Installation Instructions:

Belting Leather hides are pre­cut to size or shipped uncut toyour fabricator or job site.We recommend that the BeltingLeather acclimate for a minimum of 7–10 days on­site in orderto allow the moisture content to adjust to the environment.

Belting Leather should be installed on 5/8" finish grade plywoodfor new building installation and a 1/4" multi­ply over existingdrywall using premium water­based adhesive. It is importantthat the surface be clean, dust­free and level, and we recommendthat all other construction be completed prior to the applicationof Belting Leather.

Spinneybeck provides further detailed installation directionswith each order.

Principal photography by Joshua McHugh

Maintenance:

It is easy to maintain Spinneybeck Belting Leather with regulardusting and spot cleaning with cool water and a soft cloth.Occasional use of Spinneybeck leather maintenance products isrecommended.Other cleaners, such as saddle soaps or householdcleaners that contain harsh chemicals, alcohol or ink removersshould never be applied to Belting Leather.

All Spinneybeck Leather is tanned, dyed, and finished in Italy,according to the most stringent environmental requirements.Spinneybeck Leathers are GREENGUARD™ Certified.

Contact Spinneybeck for leather samples and additionalinformation.

Spinneybeck.com 800.482.7777 (USA) 1.716.446.2380 (USA) +353 1 6729192 (Ireland)© 2012 Spinneybeck. All rights reserved.

Belting Leather

Spinneybeck Belting Leather can bespecified for a wide range of applicationsincluding walls and custom furniture.Belting Leather, a 100% vegetabletanned, full grain, aniline dyed leatherwas originally used as pulley belts inmachinery.The thick, firm feel andsmooth finish is created from a uniqueblend of mimosa and chestnut bark.Sourced from a premium selection ofEuropean raw material, SpinneybeckBelting Leather is processed in theSanta Croce region of Italy, renownedfor its heritage in producing some of thefinest quality vegetable tanned leathers.

Available in an exciting range of neutralsand signature brights, Spinneybeck BeltingLeather is ideal for precise and refinedapplications with no reveal, includingwall applications or as an inlay for adesk or table. Belting Leather is 3mmthick; the hides are 18 sq. ft., thusallowing for shapes as large as 36" x48" to be cut and applied to verticalsurfaces on a plywood substrate.The pliability of the product allows itto be woven or wrapped aroundcolumns for a dramatic and artfulinstallation. Spinneybeck Belting Leatheralso features a protective water resistantfinish making it suitable for residential,corporate, retail, hospitality oreducational environments.

Front Cover: Belting Leather in 30" x 40" rectangles, applied vertically, in BL1906.Above:Wainscoting fabricated through the vertical application of 18" squares in BL1907.LeatherTiles in 6" hexagon in FTBLCK and FT1101. Spinneybeck

Belting Leather

Belting Leather Product Information

Installation Instructions:

Belting Leather hides are pre-cut to size or shipped uncut toyour fabricator or job site.We recommend that the BeltingLeather acclimate for a minimum of 7–10 days on-site in orderto allow the moisture content to adjust to the environment.

Belting Leather should be installed on 5/8" finish grade plywoodfor new building installation and a 1/4" multi-ply over existingdrywall using premium water-based adhesive. It is importantthat the surface be clean, dust-free and level, and we recommendthat all other construction be completed prior to the applicationof Belting Leather.

Spinneybeck provides further detailed installation directionswith each order.

Principal photography by Joshua McHugh

Maintenance:

It is easy to maintain Spinneybeck Belting Leather with regulardusting and spot cleaning with cool water and a soft cloth.Occasional use of Spinneybeck leather maintenance products isrecommended.Other cleaners, such as saddle soaps or householdcleaners that contain harsh chemicals, alcohol or ink removersshould never be applied to Belting Leather.

All Spinneybeck Leather is tanned, dyed, and finished in Italy,according to the most stringent environmental requirements.Spinneybeck Leathers are GREENGUARD™ Certified.

Contact Spinneybeck for leather samples and additionalinformation.

Spinneybeck.com 800.482.7777 (USA) 1.716.446.2380 (USA) +353 1 6729192 (Ireland)© 2012 Spinneybeck. All rights reserved.

Spinneybeck

Belting Leather

Belting Leather

Spinneybeck Belting Leather can bespecified for a wide range of applicationsincluding walls and custom furniture.Belting Leather, a 100% vegetabletanned, full grain, aniline dyed leatherwas originally used as pulley belts inmachinery.The thick, firm feel andsmooth finish is created from a uniqueblend of mimosa and chestnut bark.Sourced from a premium selection ofEuropean raw material, SpinneybeckBelting Leather is processed in theSanta Croce region of Italy, renownedfor its heritage in producing some of thefinest quality vegetable tanned leathers.

Available in an exciting range of neutralsand signature brights, Spinneybeck BeltingLeather is ideal for precise and refinedapplications with no reveal, includingwall applications or as an inlay for adesk or table. Belting Leather is 3mmthick; the hides are 18 sq. ft., thusallowing for shapes as large as 36" x48" to be cut and applied to verticalsurfaces on a plywood substrate.The pliability of the product allows itto be woven or wrapped aroundcolumns for a dramatic and artfulinstallation. Spinneybeck Belting Leatheralso features a protective water resistantfinish making it suitable for residential,corporate, retail, hospitality oreducational environments.

Front Cover: Belting Leather in 30" x 40" rectangles, applied vertically, in BL1906.Above:Wainscoting fabricated through the vertical application of 18" squares in BL1907.LeatherTiles in 6" hexagons in FTBLCK and FT1101.

Belting Leather table inlays in BL1913 and BL1907.Also shown, Spinneybeck Check Pattern Leather Rug.

Desk inlay constructed of Belting Leather, BL1912

Chair constructed of Belting Leather, BL1905

Custom Furniture

The thick, firm feel and smoothtexture of Spinneybeck Belting Leathermakes it ideal for custom furnitureapplications. Belting Leather is the onlykind of leather used in luxury productsthat can retain its shape without theneed for a separate frame.Theheavyweight, full grain, vegetable tannedleather is ideal as a sling on a chair or asan inlay for a desk or table. Spinneybeckalso offers leather pulls cut fromBelting Leather hides. Custom colorsare available upon request.

Barcelona® couch straps in Belting Leather, BL1914.

Chairs constructed of Belting Leather in a custom color

Belting Leather table inlays in BL1913 and BL1907.Also shown, Spinneybeck Check Pattern Leather Rug.

Custom Furniture

The thick, firm feel and smoothtexture of Spinneybeck Belting Leathermakes it ideal for custom furnitureapplications. Belting Leather is the onlykind of leather used in luxury productsthat can retain its shape without theneed for a separate frame.Theheavyweight, full grain, vegetable tannedleather is ideal as a sling on a chair or asan inlay for a desk or table. Spinneybeckalso offers leather pulls cut fromBelting Leather hides. Custom colorsare available upon request.

Barcelona® couch straps in Belting Leather, BL1914.

Chairs constructed of Belting Leather in a custom color

Desk inlay constructed of Belting Leather, BL1912

Chair constructed of Belting Leather, BL1905

Belting Leather table inlays in BL1913 and BL1907.Also shown, Spinneybeck Check Pattern Leather Rug.

Desk inlay constructed of Belting Leather, BL1912

Chair constructed of Belting Leather, BL1905 Chairs constructed of Belting Leather in a custom color

Custom Furniture

The thick, firm feel and smooth texture of Spinneybeck Belting Leather makes it ideal for custom furniture applications. Belting Leather is the only kind of leather used in luxury products that can retain its shape without the need for a separate frame.The heavyweight, full grain, vegetable tanned leather is ideal as a sling on a chair or as an inlay for a desk or table. Spinneybeck also offers leather pulls cut from Belting Leather hides. Custom colors are available upon request.

Barcelona® couch straps in Belting Leather, BL1914.

Belting Leather Product Information

Installation Instructions:

Belting Leather hides are pre-cut to size or shipped uncut toyour fabricator or job site.We recommend that the BeltingLeather acclimate for a minimum of 7–10 days on-site in orderto allow the moisture content to adjust to the environment.

Belting Leather should be installed on 5/8" finish grade plywoodfor new building installation and a 1/4" multi-ply over existingdrywall using premium water-based adhesive. It is importantthat the surface be clean, dust-free and level, and we recommendthat all other construction be completed prior to the applicationof Belting Leather.

Spinneybeck provides further detailed installation directionswith each order.

Principal photography by Joshua McHugh

Maintenance:

It is easy to maintain Spinneybeck Belting Leather with regulardusting and spot cleaning with cool water and a soft cloth.Occasional use of Spinneybeck leather maintenance products isrecommended.Other cleaners, such as saddle soaps or householdcleaners that contain harsh chemicals, alcohol or ink removersshould never be applied to Belting Leather.

All Spinneybeck Leather is tanned, dyed, and finished in Italy,according to the most stringent environmental requirements.Spinneybeck Leathers are GREENGUARD™ Certified.

Contact Spinneybeck for leather samples and additionalinformation.

Spinneybeck.com 800.482.7777 (USA) 1.716.446.2380 (USA) +353 1 6729192 (Ireland)© 2012 Spinneybeck. All rights reserved.

Spinneybeck

Belting Leather

Belting Leather

Spinneybeck Belting Leather can bespecified for a wide range of applicationsincluding walls and custom furniture.Belting Leather, a 100% vegetabletanned, full grain, aniline dyed leatherwas originally used as pulley belts inmachinery.The thick, firm feel andsmooth finish is created from a uniqueblend of mimosa and chestnut bark.Sourced from a premium selection ofEuropean raw material, SpinneybeckBelting Leather is processed in theSanta Croce region of Italy, renownedfor its heritage in producing some of thefinest quality vegetable tanned leathers.

Available in an exciting range of neutralsand signature brights, Spinneybeck BeltingLeather is ideal for precise and refinedapplications with no reveal, includingwall applications or as an inlay for adesk or table. Belting Leather is 3mmthick; the hides are 18 sq. ft., thusallowing for shapes as large as 36" x48" to be cut and applied to verticalsurfaces on a plywood substrate.The pliability of the product allows itto be woven or wrapped aroundcolumns for a dramatic and artfulinstallation. Spinneybeck Belting Leatheralso features a protective water resistantfinish making it suitable for residential,corporate, retail, hospitality oreducational environments.

Front Cover: Belting Leather in 30" x 40" rectangles, applied vertically, in BL1906.Above:Wainscoting fabricated through the vertical application of 18" squares in BL1907.LeatherTiles in 6" hexagons in FTBLCK and FT1101.