basics ed 1
TRANSCRIPT
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 1/10
MEM05 Metal and EngineeringTraining Package
Learner guideVersion 1
Training and Education SupportIndustry Skills Unit
Meadowbank
Product code: 5516
MEM09003B
Prepare basic engineering drawing
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 2/10
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 3/10
© TAFE NSW (Training & Education Support, Industry Skills Unit Meadowbank)2011
MEM09003B Prepare basic engineering drawing
Acknowledgement
The TAFE NSW Training and Education Support Industry Skills Unit, Meadowbank would like to acknowledge
the support and assistance of the following people in the production of this learner resource guide:
Standards AustraliaAustralian Standard AS 1100.101-1992 Technical drawing - General principles
Writer:
Warren BlackadderTAFE NSW
Reviewer:
Jim Miles
Project Manager:
Stephen DaviesEducation Programs ManagerTAFE NSW
Enquiries
Enquiries about this and other publications can be made to:
Training and Education Support Industry Skills Unit, MeadowbankMeadowbank TAFELevel 3, Building JSee Street,MEADOWBANK NSW 2114
Tel: 02-9942 3200 Fax: 02-9942 3257
© TAFE NSW (Training and Education Support, Industry Skills Unit, Meadowbank) 2011
Copyright of this material is reserved to TAFE NSW Training and Education Support, Industry Skills Unit
Meadowbank. Reproduction or transmittal in whole or in part, other than for the purposes of privatestudy or research, and subject to the provisions of the Copyright Act, is prohibited without the writtenauthority of TAFE NSW Training and Education Support, Industry Skills Unit Meadowbank.
ISBN 978-1-74236-260-1
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 4/10
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 5/10
Page 9 of 80
MEM09003B Prepare basic engineering drawing
R e q u i r e d s k i l ls
• Produce a simple drawing in Orthogonal Projection• Use different line constructions to identify features on an orthogonal view.
R e q u i r e d k n o w l e d g e
• Name the Australian Standard controlling the preparation and presentation of all drawings inAustralia
• The difference between First and Third Angle Projection• Identify and/or name 10 items of manual drafting equipment• Identify and/or name 10 types of line construction and line widths used in preparing a drawing.
S t a n d a r d s - Ge n e r a l I n f o r m a t i o n
The preparation of plans for the construction of buildings and machines is as old as written history.Original drawings were carved on rock or sketched onto papyrus. One of the oldest drawings of anengineering component is a cave painting of a bow in Castellon, France in about 8000BC.
As civilisation grew and the skills became more advanced, plans were produced on other mediums suchand bark and paper using a variety of instruments to assist in creating better quality drawings.
Figure 1
Figure 1 shows a detail drawingof various halls, rooms andantechambers around the centralcourtyard of the Palace of NurAdad in Larsa, Babylon about1850BC and was drawn in clay.
Figure 2
Figure 2 shows Leonardo DeVinci’s drawing of a helicopter(1490-1500).
Figure 3
Michelangelo produced the preliminarysketch for San Giovani dei Florentini in1559 on paper as shown in Figure 3.
Figure 4
During the Industrial Age inthe 1850’s drawings becameelaborate and were prepared byqualified architects, engineersand draughtsmen and can beseen in Figure 4, Robinson’s
New York Utility plan showingthe sewer, gas, water servicesand ventilation.
TOPIC 1: Australian drawing standards and orthographic projection
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 6/10
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 7/10
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 8/10
Page 17 of 80
MEM09003B Prepare basic engineering drawing
Topic 1: Student exercises
Ex 1-01
In the space provided, name the type of line indicated.
1
2
3
4
3 2
4
1
4 5 °
1
2
3
4
5
6
3 5 1
2 4
6
52.5
Ø6
1
2
3
4
5
4 1 5
23
45
1
2
3
4
5
1
2 3
4
5
Name: ______________________________________________
Ex 1-02
In the space provided, name the type of line indicated.
1
2
3
4
2
4
R2
1 3
1
2
3
4
5
1
2
3
5
4
Ø40
1
2
3
4
3
1
4
2
1
2
3
4
5
1
3 4
5
2 2 5
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 9/10
Page 18 of 80
MEM09003B Prepare basic engineering drawing
Ex 1-03
CAD - Create a new drawing and produce the views in Third Angle Projection. Save the file in your work
area as MEM09003-SE-03-T1.
Sketch the views in Third Angle Projection on the grid supplied.
Name: ___________________________________________
Ex 1-04
CAD - Create a new drawing and produce the views in Third Angle Projection. Save the file in your work
area as MEM09003-SE-04-T1.
Sketch the views in Third Angle Projection on the grid supplied.
Name: ___________________________________________
7/23/2019 Basics ED 1
http://slidepdf.com/reader/full/basics-ed-1 10/10
Page 19 of 80
MEM09003B Prepare basic engineering drawing
Ex 1-05
CAD - Create a new drawing and produce the views in Third Angle Projection. Save the file in your work
area as MEM09003-SE-05-T1.
Sketch the views in Third Angle Projection on the grid supplied.
Name: ___________________________________________
Ex 1-06
CAD - Create a new drawing and produce the views in Third Angle Projection. Save the file in your work
area as MEM09003-SE-06-T1.
Sketch the views in Third Angle Projection on the grid supplied.
Name: ___________________________________________