basic fuel injection system heavy equipment technician agricultural equipment technician second...

14
Basic Fuel Injection System Heavy Equipment Technician Agricultural Equipment Technician Second Period Diesel Fuel Injection Systems and Tune-Up 190203c

Upload: fay-hutchinson

Post on 05-Jan-2016

218 views

Category:

Documents


0 download

TRANSCRIPT

Basic Fuel Injection System

Heavy Equipment TechnicianAgricultural Equipment Technician

Second Period

Diesel Fuel Injection Systems and Tune-Up

190203c

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 1 - Optimum crank angle.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 2 - Change in timing with an increase in engine speed.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 3 - Atomized injector spray.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Table 1 – Different methods of metering.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 4 - Fuel spray penetration.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 5 - Multi-plunger injection pump system.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 6 - Fuel system with unit-type injectors.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 7 - Fuel tank.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 8 - Primary and secondary fuel filters.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 9 - Combination primary filter and water separator.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 10 - Transfer pump locations.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 11 - Multi-plunger injection pump and high-pressure fuel lines.

© Her Majesty the Queen in Right of the Province of Alberta by the Minister of Advanced Education. 1998

Figure 12 - Hydraulic injection nozzles and unit injectors.