Basic Ex products

Dear partners,

Our products are intended for use in potentially explosive atmospheres of gases, vapors and dust in in-dustries such as refineries, offshore installations, petrochemical industry, chemical industry, pharmaceuti-

cal industry, food processing.

The production program includes Ex light fittings, Ex installation material and accessories, Ex control

units, Ex signal devices, Ex terminals, Ex distribution cabinets up to 630 V and 500 A.

In accordance with national regulative, all our products and systems for quality assurance are certified

by an authorized certification notified body according to the ATEX Directive 2014/34/EU.

TEPEx achieved the certificates for the Customs Union formed by the Republic of Armenia, the Republic of Belarus, the Republic of Kazakhstan, the Kyrgyz Republic and the Russian Federation. TR CU Certifi-cate of Conformity (EAC Certificate) is a mandatory document required to be submitted to the customs body for importing to territory of the Customs Union. All existing national certificates of conformity of

Russia (GOST R), Belarus (STB) and Kazakhstan (GOST K) became invalid after 15th march 2015.

The production process is conducted according to high standards of ISO 9001 (Quality Assurance Sys-tem) and ISO 14001 (Environmental Management System), ensuring high quality products with con-

stant care for environment.

Basic Ex products / Zone 1, 21

WWW.TEPEX.HR

Our production

TEP Ex manufactures its products using modern processes and qualified personnel. TEP Ex is committed to an extensive and on going R&D projects, this along with on going investment, will continue to deliver

innovative and high performance products for installation within safety critical areas.

make your work surroundings safer

Ex junction box RK 01/514

MODEL CODE ENTRIES TERMINALS

RK 01/514 4x plastic Exe cable gland M25 for cable 7-15mm 5x 4mm2

www.tepex.hr

IP 66 +50

-40

C

● Enclosures made

of PA glass fiber

reinforced polyam-

ide

● Equipped with ter-

minals 4mm2

Enclosure: PA glass fiber reinforced polyamide, color - black

Cover: PA glass fiber reinforced polyamide with integrated thermo-

plastic elastomer gasket, closes with four M5 stainless steel screws.

Ex switch SKX 12/21

Enclosure made of

glass-fibre rein-

forced polyester

resin

2 pole OFF switch

IP 66 +55

-20

C

Enclosure: polyester plastic reinforced with glass fiber, color - black

Cover: with integrated thermoplastic elastomer gasket, closes with

four M5 stainless steel screws.

MODEL CODE TYPE ENTRIES

SKX 12/21 OFF-ON (0-I) switch 2 pole, 16A 1x plastic Exe cable gland M25 for cable 7-15mm

OFF-ON switch 2 pole /

internal component SMS 03/1

IP 66 +50

-30

C

● Robust light alloy

enclosure

● Allowing the user

to mount in areas

where the availa-

ble space is re-

stricted

● Estimated service

life 70 000 hours

● Used for marking

escape routes and

exits in potentially

explosive atmos-

pheres.

● Self-test, monitor-

ing and diagnostics

reduce costly

maintenance

checks.

IP 66 +50

-40

C

Ex bulkhead LED light fitting 0403.24 LED 20-1

Ex emergency light fitting FLXE 118 LED 32-0

Housing: aluminium powder painted casting

Diffuser: borosilicate glass, silicone gasket

MODEL CODE LED power / voltage Luminous flux [lm]

0403.24 LED 20-1 20W / 230V 2000

MODEL CODE Voltage Entries

FLXE 118 LED 32-0 220-240 V AC/DC 1x ADP24 + 1x M20 plug

Housing: aluminium powder painted casting

Diffuser: borosilicate glass tube; Gasket: silicon

The light fitting is supplied wall/sealing mounting set

make your work surroundings safer

Ex fluorescent light fitting PSF 236

MODEL CODE POWER / luminous Lampholder

PSF 236 2x 36W / 6700 lm G13

IP 66 +50

-20

C

● T8 fluorescent

lamps in parallel

configuration

● Central locking

● Switch with safety

lock; when opening

the central lock, all

poles of the volt-

age supply to the

ballast are discon-

nected

● In case of a lamp

fault, the electronic

ballast disconnects

the defective lamp

from the power

supply

Housing: SMC polyester plastic reinforced with glass fiber

Diffuser: PC polycarbonate plastic

Gasket: silicone

Central locking: can be opened/closed using a socket key SW8, hinged lamp cover

The light fitting is normally supplied without light sources, socket key screw, two Ex e cable glands M25, two

Ex e plugs M25 and with ceiling mounting set

L1 [mm] L2 [mm]

PSF 236 1370 800

www.tepex.hr

make your work surroundings safer

IP 66 +50

-30

C

● 1,5 or 3h autonomy

● Maintained / Non

maintained operation

● Ni-Mh battery

Emergency fluorescent light fitting PSF 218-E

Housing: SMC polyester plastic reinforced with glass fiber

Diffuser: PC polycarbonate plastic

Gasket: silicone

Central locking: can be opened/closed using a socket key SW8, hinged lamp

cover

The light fitting is normally supplied without light sources, socket key screw,

two Ex e cable glands M25, two Ex e plugs M25 and with ceiling mounting

set

MODEL CODE POWER / luminous Bat.mod. luminous

PSF 218-E 2x 18W / 2700 lm 1,5h aut. 800lm 3h aut 550lm

L1 [mm] L2 [mm]

PSF 218-E 750 400

Prilaz dr.F.Tuđmana 6, 49210 ZABOK, CROATIA

Tel: +385 49 222 900, +385 49 426 451

Fax: +385 49 426 450

@: tepex@tepex.hr prodaja@tepex.hr

Web: www.tepex.hr