bank of baroda · the estimated cost of the project is ... prior approval of the employer/...

1

2.

3.

4.

5.

6.

7.

1.

2.

3.

Bank of Baroda

Interested agencies having experience in work of similar nature & magnitude and fulfilling the

eligibility criteria given below may download detailed tender document from Bank's Website

http:bankofbaroda.com/tenders.asp

Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility

criteria & the technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain :

financial/price bid along with a copy of the tender document, duly signed in all pages both shall be

separately sealed & submitted in another sealed envelope to the General Manager , Bank of

Baroda, Eastern Zanal Office, BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt Lake City, Kolkata :

700 091, by 3 P.M. on 22.08.2011 along with Earnest money amounting to Rs. 14,000/- by Bank Draft /

Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.

Part 'A'(Technical Bid) will be opened at 4.00 p.m. on 22.08.2011.

Part 'B'(Price Bid) of the tenders will be opened for those only who fulfils the qualifying criteria given in

the tender document. The unopened part 'B' along with Earnest Money deposit for those not fulfilling

qualifying criteria will be returned.

Bank of Baroda, Eastern Zone, Kolkata invites sealed tenders in two bid system for Civil works,Interor

and furnishing work & electrical works at bank's guest house at Prince Anwar Shah road in Kolkata.

The estimated cost of the project is approx. Rs. 14.17 lacs. The work is to be completed within

3(Three) weeks.

(Government of India Undertaking)

NOTICE INVITING TENDER

Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our

Consultant M/s. Alinda, New Santoshpur Main Road .Kolkata - 700 064.Ph No- 033-24250569 or

9433798849.

The Bank reserves the right to summarily reject any or all application without assigning any reason

there of. Bidders are requested to be present at 4.00 pm on 22.08.2011.

MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)

The tenderer should have completed in last three Financial years (i.e. current year & two previous

financial year) in Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc.

minimum 3 (three) similar type of work (Civil,Interior ,Furnishing & Electrical) costing not less than Rs.

15.00 lacs in single contract. (Work order & completion Report in support must be submitted &

marked annexure-I)

The total contract amount received by the Tenderer during the last 3 financial years should be

minimum as 20.00 lacs per year in contract work. In support of this the Tenderer should submit

audited sheet duly Certified by the Chartered Accountant & marked annexure-II.

The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an

amount of 200% of the advertised Tender value marked annexure-III.

1

4.a) The Tenderer shall furnish copies of :

i) IT Registration Certificate with No.

ii) Sales Tax Registration Certificate with No.

iii) Service Tax Registration Certificate with No.

iv) Electrical Contractor's License with No.

v) Electrical Supervisor’s License with No.

5.

a)

b)

c)

d)

e)

List of important plant & machinery available on hand (own) and proposed to be inducted (own &

hired to be given separately) for carpentry & electrical work (marked annexure-X)

List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt. Govt.

undertaking / Corporate Sectors giving description of work, organisation for whom executed,

approximate value of contract at the time of award, date of award and date of scheduled

completion of work, date of actual completion and final value of contract should also be given

(marked annexure-XI)

List of works in hand indicating description of work, contract value, approximate value of balance

work yet to be done and date of award (marked annexure-XII)

Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for

day to day supervision & coordination of the work at site.

All informations are to be fully authenticated & documented failing which the documents submitted will not be

accepted.

- marked annexure - V

- marked annexure - VI

- marked annexure - VII

- marked annexure - VIII

The Tenderer should also submit the following documents along with the Tender.

List of technical persons available on hand, years of their association with the firm & proposed to be

engaged for the subject work, if selected (marked annexure-IX) ;

- marked annexure - IV

2

1.

2.

3.

4.

5.

6.

7

8.

9.

10.

11. The Employer i.e. Bank of Baroda reserves the right to themselves to accept or reject any or all offers

without assigning any reason therefor.

The arrangement for “ Wire Management " is to have prior approval of the employee.

The quoted rates shall remain firm during the entire currency of contract. No price variation for any

causes whatsoever, shall be entertained.

The time of completion shall be 3(three) weeks from the date of placement of order.

The offer shall remain valid for acceptance for a period of 30 days from the date of submission of

offer.

Payments will be made once on completion by the Employer within 15 days after certification of bill

by the Consultant 10% of the total payable amount is to be retained as retention money and will

become due for release after expiry of six months from the date of completion of the installation &

subject to satisfactory maintenance of the executed work.

Tenders addressed to General Manager, Bank of Baroda, Eastern Zonal office and to be submitted at

his office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700 091, by 3

P.M. on 22.08.2011, accompanied by Earnest Money amounting to Rs. 14000/- by Bank draft

payable to Bank of Baroda and other documents as mentioned in NIT. Part 'A' of the tenders will be

opened at 4.00 P.M. on the same date.

Contractors will be required to arrange for his own storing. Dismantled materials are to be carted

away from site at own cost and disposed of in conformity with Municipal regulations.

The quoted rates, are to include cost of all materials, labour and or any other material, all statutory

taxes, transport, handling delivery at site and installation, complete in all respect, as per drawing,

directions or instructions of Employer/Consultant. The quoted rates are also to include dismantling of

partitions, counters, old electrical wirings etc. and stacking serviceable materials and disposal of

debris, etc.

Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to

be used in the work.

GENERAL TERMS & CONDITIONS

The tenderer is to visit the site and acquaint himself with site conditions before quoting rates.

3

SPECIFICATION OF MATERIALS FOR INTERIOR WORK

Sl.No. Description

1. Laminate

2. Ply & Block Board

3. Glass

4. False Ceiling & Accessories

5. Veneer

6. Textured Wall Paint

7. Glue

8. Locks

9. Aluminium Hardware Fittings Metako / Allen / Crown with ISI Mark

10. Brass Hardware

11. Floor Spring

12. Screws

13. Casters

14. Sliding Drawers / Channels

15. Furnishing Fabric

16. Leather Foam

17. PVC Flooring

18. Carpet Glamour or Favourite (Balla Industries)

Make (s)

Woven type "Harmony" range from "Vimal" or

equivalent

Bhor Industries or equivalent

Armstrong / Krishna / Premier

Nettle Fold

Efficient Gadjets

Earl Behari / Efficient Gadjets

Durian / Century / Archid

ICI, Jenson & Nicholson / Asian paint / Berger

ICI, Spectrum, Heritage

Godrej / Secur / Yale

Brass Arts / Vijoy

Evrite Agencies Pvt. Ltd. / Nita Floor Spring

India Gypsum Ltd.

Marino / Greenlam / Century / Archid

Green / Century / Archid / Austin

Modi / Indo Ashahi / Float Glass India Ltd.

4

SPECIFICATIONS OF MATERIALS FOR ELECTRICAL WORK

Sl.No. Description

1. Switch fuse / fuse switch units (HRC) (32A TPN &

above)

2. Timer (TSQ 100)

3. Voltmeter & Ammeter

4. Voltmeter & Ammeter selector switches

5. Phase indicating lamp

6.

7. Capacitor

8. HRC fuses

9. Power Cable : XLPE

10.

11. HRC fuse base & carriers.

12. PVC terminals

13. 1.1 KV grade PVC insulated armoured

aluminium cable (ISI marked)

14. 1.1KV 660V grade PVC insulated & sheathed /

insulated copper wire & flexible cords (ISI

marked).

15. Moulded case circuit breaker

16. RCCB / ELCB

17. Switch fuse with rewirable fuses. (6A & 32A TPN)

18. Isolator

19. Changeover switch (on load type)

GE Power/SIEMENS/L&T/SCHNEIDEV

ELMEX / ESSEN

KENBAR / HAVELLL’S / ELCON / HPL /

CONTROL & SWITCHGEAR.

HAVELL’S / STANDARD

HAVELL’S / STANDARD

LEGRAND/ SIEMENS / L&T

Vaishno / SIEMENS / ROSS controls

A E / KAPPA SEGC & CONTROLS / CONTROL

SWITCHGEAR

UNIVERSAL / GLOSTER / NATIONAL / NICCO /

FINOLEX/HAVELL'S

L & T / SCHNEIDER/LEGRAND

GE power / SIEMENS / L&T / Schneider

A. E. / IMP

Make (s)

L & T

NATIONAL/FINOLEX/ HAVELLS

KAYCEE / L & T

CROMPTON/SIEMENS

TATA LEVERT/NEUMERIC/ KIRLOSKAR

GLOSTER/INCAB/POLYCAB/CINOLEX

GE power / SIEMENS / L & T / SCHNEIDER

5

Sl.No. Description

20. MCB distribution board

21. Distribution fuse board with rewireable fuses

22. Miniature circuit breaker / MCB type isolator

23. Contractors

24. Auxiliary contractor

25. 1/16 Amp Piano key type switch / flushed type

plug socket

26. 6/16 Amp modular switch / socket, module

plate & mounting M.S. / PVC box.

27. 300W, 2 module electronic regulator

28. Ceiling rose

29. Holder

30. Buzzer / call bell

31. Luminous indicating type buzzer with

cancellation push.

NATIONAL / HOMA / EQUIVALENT

32. Alarm bell.

33. G.I. pipe

34. Steel conduits (conforming to IS in all respects)

35. Black enamelled

36. Galvanised

Make (s)

LEGRAND/ SIEMENS

CPL (Genius) / ANCHOR (Roma) / CRABTREE /

MK

ANCHOR (Roma) / CRABTREE / MK

ANCHOR / PRECISION / SSK & RIDER

SIEMENS / L & T/BCH

SIEMENS / L & T

LEGRAND / SIEMENS

Good local make with minimum wall thickness of 3

mm. for 19 / 20 mm. and 25mm sizes & 2.5 mm. for

12mm. sizes

BEC / SUPREME / AKG

BEC / SUPREME / AKG

BST / BANSAL

KHERAJ / GETCO

BAJAJ / ANCHOR / NATIONAL / HOMA

KAY / EPP / ANCHOR / JJ

HAVELL’S / BPC / BOSMA

KAY / EPP / ANCHOR / JJ

6

Sl.No. Description

37. Non-metallic PVC conduit pipe

38. Compression type brass gland

39. Cable termination socket

40. Light fitting & lamps

41. Decorative/Ornamental /Chandelier / Light

Fittings

42. Ceiling Fan

43. Exhaust fan

44. Industrial type socket & top

45. Telephone wire

46. Telephone Socket

47. Network Cable

48. Contractors

49. STARTERS NORTH WEST / CABTREE

CROMPTON / POLAR / KHAITAN

HAVELL’S / CROMPTON / LEGRAND

FINOLEX / RRK/NATIONAL

CRABTREE/MK

CROMPTON / POLAR / KHAITAN / EPC

WIPRO or equivalent

DOWELLS / JOHNSON / COMET

PLAZA / KALINGA/ PRECISION/AKG or

equivalent

FINOLEX or equivalent

L & T / SIEMENS

CROMPTON / POLAR / KHAITAN

Make (s)

DOWELL'S

7

RS.

RS.

RS.

TOTAL RS.

SECTION - II : Interior & furnishing works

FOR

Bank's guest house at at Prince Anwar Shah Road,Kolkata

CIVIL,INTERIOR FURNISHING & ELECTRICAL WORKS

SECTION - I : Civil and S&P upgradation works

BANK OF BARODA

GENERAL SUMMARY of Price Bid

SECTION - II : ELECTRICAL WORK

(-)

(-)(-)

(-)

8

CIVIL WORKS-UPGRADATION GUEST HOUSE-BOB

Sl. No. Item Unit Quantity Rate Amount(Rs.)

1.00 Stripping of worn out plaster and racking out joints ofwalls , ceilings etc. upto any height and in any floorincluding removing rubbish with in a lead of 75 metreas directed sqm. 120

2.00 Removal of rubbish, earth etc. from the working siteand disposal of the same, beyond the compound, inconformity with the Municipal/Corporation Rules forsuch disposal, loading into truck and cleaning the sitein all respect as per direction of Engineer-In-Charge cum. 10

3.00 Supplying and laying true to line and level vitrified tiles of approved brand size not less than 600mm x 600mm x 10mm thick in floor , skirting etc. using polymerised adhesive (as per manual of the applicator ) over existing floor finish , after preparing the same by means of cleaning , scrapping as necessary for existing floor, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles complete finishing in all respect as per instruction----- in all floors(a) Deep colour and white sqm. 160

4.00 Supplying, fitting & fixing 1st quality Ceramic tiles inwalls and floors to match with the existing work & 4 nos.of key stones (10mm) fixed with araldite at the back ofeach tile & finishing the joints with white cement mixedwith colouring oxide of required to match colour of tilesincluding roughening of a concrete surface if necessaryor by synthetic adhesive and grout materials etc.

(B) WallWith sand cement mortar (1:3) 15 mm thick and 2 mmthick cement slurry at back side of tiles using cement @2.91 Kg/sq.m and joint filling using white cement slurry@ 0.20 Kg/sq.m(a) Area of each tile upto 0.09 sq.m(i) Coloured decorative

(a) In all floors Sqm 48

5.00 Easing of doors and windows each 30

6.00 Hydraulic door closer of approved quality as per ISIstandard fitted and fixed complete. ------------In all floors a) Heavy type (ISI Size-3) each 2

B-O-Q & ESTIMATE OF BANK OF BARODA GUEST HOUSE AT P.A. SAHA ROAD

Upgradation of Guest House of BOB at Prince Anawar Shah Rd. Bldg. Consultant : ALINDA


Sl. No. Item Unit Quantity Rate Amount(Rs.)7.00 Anodised aluminium barrel/tower/socket bolt (full

covered) of approved quality manufactured fromextruded section conforming to(I.S. 204-74) fittedand fixed with cadmium plated screwvii) 225 mm. long x 10 mm. dia bolt each 30

8.00 Anodised aluminium Aldrop/Sliding bolts/ hasp boltapproved quality manufactured from extruded sectionconforming to I.S. specification (I.S. 2681-66) fitted andfixed complete :

iii) a) 300 mm. x 16 mm. dia bolt each 30

9.00 Anodised aluminium D-type handle of approved qualitymanufactured from extruded section conforming to ISspecification (IS:230-72) fitted and fixed complete :

a) With continuous plate base (hexagonal/round rod) vii) 150 mm. grip x 12 mm. dia rod each 30

10.00 Supplying, fitting and fixing in position approved P.V.C.door frame made from extruded P.V.C. multichamberhollow section having dimensions 60 mm. x 50 mm./60mm. x 53 mm and suitably reinforced, horoizontalscrews after inserting two number steel brackets asreinforcement making suitable space for placinghinges, one steel tube 40 mm. x 20 mm. x 18 gaugewill be inserted on one full vertical side of the frame(hinge side) as reinforcement, the frame will then befixed in the opening with the help of P.V.C. expandablefastner and steel screws i/c. cost of all materials and labour hire charges of tools and appliances, carriage ofall materials, taxes & all other incidental chargescomplete----------------------------------------- [In all floors] per Mtr. 20

11.00 Supplying, fitting and fixing P.V.C. door shutter ofapproved quality and shade in position, the style andrail of the P.V.C. door shutter will be made of rigidP.V.C. multicavity hollow chamber of suitable size andsection will 2.5 mm. wall thickness the section willhave two nos. built in beads, horizontal and verticalsection shall be fixed by each other by a self tappingscrews and 2 nos. of M.S. tubular galvanised bracket oflength 200 mm. x 80 mm. and other 100 mm. x 100mm. both 18 gauge in each corner of the shutter framefor placing hinges, polymer based multicavity hollowsection of 2.5 mm. wall thickness will be fitted in themiddle with aluminium cleat and steel screws as lockrail, the section frame will then be fitted in by polymerbased panels of suitable size and 2 nos. of 6 mm. diabright rod will be inserted horizontally with both sidecheck and nut system and stretches where fixing ofhinges/hasp bolt/tower bolt/door ring are required to bestrong enough it with stand wear and tear. The rate is



Sl. No. Item Unit Quantity Rate Amount(Rs.)inclusive of cost of 100 mm. Anodised aluminiumhinges and cost of all materials and labour hirecharges of tools and plants and appliences. Carriage ofall materials, taxes & all other incidental chargescomplete. ------------------------------- In all floors

a) 37 mm. thick shutter with 20 mm. thick panel (wallthickness 1.2 mm.) & 90 mm. width stiles and railswith lock rail 105 mm. per sqm. 4.2

12.00 Plaster (to wall, floor, ceiling etc.) with sand andcement mortar i/c. rounding off or chamfering cornersas directed and ranking out joints or roughening ofconcrete surface, i/c. throating, nosing and drip coursewhere necessary ---------------------------------[All Floors]

ii) 20 mm. thick plaster (6:1)in all floor sqm. 100

iii) 10 mm. thick plaster with 3:1 cement moterin all floors sqm. 20

13.00 Supplying fitting and fixing of 18/20mm thick granitecooking platform of approved texture and shade with necessary smoothening of edge fixed with cement morter and epoxy as per drawing and instruction sqm. 4.1

14.00 Neat cement punning above 1.5 mm. thick in walldado, window, sills, floor, drain etc.--------- In all floors sqm. 6

15.00 Rendering the surface of walls and ceiling with plaster of paris (thickness not less than 1.5 mm.) Sqm 120

16.00 Removing loose scales, blister etc. from old paintedsurface and thoroughly smoothening the surface tomake the same suitable for receiving fresh coat ofpaint sqm. 140

17.00 Scraping and removing greasy soot from walls orceiling of kitchen or similar smoke affected rooms andpreparing the surface sqm. 60

18.00 Applying interior grade acrylic primer of approved quality and brand on plastered or concrete surface oldor new surface to receive distemper /acrylic emulsion paint including scrapping and perparing the surface thoroughly , complete as per manufacturer's specification and direction of EICTwo coats sqm. 820in all floors




19.00 Acrylic distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer ( as per manufacturer's specifications ) including cleaning andsmoothening of surface sqm. 820

20.00 Priming one coat on timber, plastered surface with synthetic enamel/oil boundprimer of approved quality i/c. smoothening surfacesby sand papering etc. sqm. 60

21.00 Priming one coat on steel orother metal surface with synthetic enamel/oil boundprimer of approved quality i/c. smoothening surfacesby sand papering etc. sqm. 45

22.00 Painting with best quality synthetic enamel paint ofapproved make and brand i/c. smoothening surface bysand papering etc. i/c. using of approved putty etc. onthe surfaces, if necessary :a) On timber or plastered surface with super gloss (Hi gloss):iv)Two coats (with any shade except white) sqm. 60b) For Steel or Metal Surfaceiv)Two coats (With any shade except white) sqm. 45

23.00 Supplying best Indian sheet glass panes set in puttyand fitted and fixed with nails and putty complete In all floors :b) 4 mm. thick sqm. 10

24.00 Anti termite treatment to the juction of wood work andmasonary walls with chemical emulsion by admixing chloropyrifox emulsifiable concentrates (1%concentra -tion ) with water by weight including spraying at the points of contact with the adjoining masonary by drilling 6m holes at a downward angle of about 45 degreeat the junction of woodwork and masonary and spuirting …chemical emulsion into these holes at the rate of half litre per hole .The entire work is to be carried out as per specification of Code I.S.-6313 (Part-III)-1981. Sq.M. 640

25.00 Spot application for insecticides using aqua base sprey for pest ( for bugs, cockroaches, silverfish, termites etc ) to walls and ceiling etc. with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration ) with water by weight including spraying the emulsified chemical @0.5 ltr. Per sqm. on wall surfaces , ceiling , electrical lines including drilling holes in places where source of termite is detected squirting chemical solution into the holes and sealing with cement grout , finish in all respect. sqm. 170




SANITARY & PLUMBING FITTINGS AND FIXTURESSupplying fittings and fixing of following s&p fittings and fixtures of Jaquar / Sera or similar make whereapplicable as per approval of the authority

26.00 wall mounted E.P.W.C. with matching 12 ltr. cistern complete with all fittings and fitures no. 4

27.00 Ablusion shower of approved brand and make no. 4

28.00 White vetrious hand wash basin 550x350with necessary bottle trap, stop cock etc. complete no. 4

29.00 Swan-neck piller cock for sink no. 2

30.00 Chromium plated piller cock no. 4

31.00 Chromium plated shower rose no. 4

32.00 Chromium plated Towel rod 600 long no. 4

33.00 Chromium plated Towel ring 150 dia no. 4

34.00 Chromium plated soap tray no. 4

35.00 500x750 glass mirror with matching front tray no. 4

36.00 Stainless steel sink with drain board for kitchen no. 2

37.00 Removing and replacing loft tank of 100 ltr. Capacityof approved brand & make along with necessaryclamps and other accessories as applicable complete no. 2

38.00 Supplying fitting and fixing of necessary plumbing and waste pipe lines , both PVC and GI as applicable for the completion of the 04 no. toliet & 02 nos. kitchens L.S.




EXTERNALSURFACE &GR. FL. ENTRANCE LOBBY PAINTING

39.00 Stripping of worn out plaster and racking out joints ofwalls , ceilings etc. upto any height and in any floorincluding removing rubbish with in a lead of 75 metreas directed sqm. 105

40.00 Plaster (to wall, floor, ceiling etc.) with sand andcement mortar i/c. rounding off or chamfering cornersas directed and ranking out joints or roughening ofconcrete surface, i/c. throating, nosing and drip coursewhere necessary ---------------------------------[All Floors]

ii) 15 mm. thick plaster (4:1)in all floor sqm. 105

41.00 Scraping of moss, blisters etc. throughly from exteriorsurface of walls necessitating the use of scraper, wirebrush etc. as per direction of the(external surface)

sqm. 595

42.00 Applying exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface oldor new surface to receive decorative textured ( mattfinish ) or smooth finish acrylic exterior emulsion paintincluding scrapping the surface thoroughly , complete as per manufacturer's specifications and direction of Engineer in chargeIn all floorsTwo coats sqm. 700

43.00

In all floor.(i) Two Coats (a) On cement plaster surface. sqm 700

44.00 Applying plastic emulsion of approved make and brand on walls and ceiling including sand papering in

termediate coats including putty (to be done under specific instruction).

a) Two coats. sqm. 210

45.00 Priming one coat on steel orother metal surface with synthetic enamel/oil boundprimer of approved quality i/c. smoothening surfacesby sand papering etc. sqm. 180

Protective and decorative textured exterior high classmatt finish, composed of specials Thermoplastic resincontaining fine crystalline additives drive from Gramte




46.00 Painting with best quality synthetic enamel paint ofapproved make and brand i/c. smoothening surface bysand papering etc. i/c. using of approved putty etc. onthe surfaces, if necessary :a) On timber or plastered surface with super gloss (Hi gloss):iv)Two coats (with any shade except white) sqm. 0b) For Steel or Metal Surfaceiv)Two coats (With any shade except white) sqm. 180

47.00 Removal of rubbish, earth etc. from the working siteand disposal of the same, beyond the compound, inconformity with the Municipal/Corporation Rules forsuch disposal, loading into truck and cleaning the sitein all respect as per direction of Engineer-In-Charge cum. 6

Total Cost of Civil Works for Upgradation

Say Rs.


ELECTRICAL ESTIMATE GUEST HOUSE OF BOB

ItemNo. Description Unit Quantity Supply Installation Supply Installation Remarks

A. CONCEALED WIRING(Including supply of materials, groove cutting inwall / floor and makig good damage to originalfinish)

A1) Point wiring for Light/Fan/Exhust through pre laidconcealed conduit. These include:

a) 2 nos. 1.5 Sq.mm PVC insulated (FRLS) strandedcopper wire 1100V grade. (Make- Polycab, Finolex, Mescab or other similer make)

b) 1 no. 1.5 Sq.mm PVC insulated (FRLS)strandedcopper wire 1100V grade for earthing.

c) 16 SWG G.I. Junction Box (100x100x62 mm) with5 mm thick acrylic cover and fixing accessories.

d) 1.6mm(16 SWG) thick painted MS switch box

e) 6A, 240V Moduler switch to be mounted onswitchboard .

B-O-Q & ESTIMATE FOR ELECTRICAL WORKS OF GUEST HOUSE OF BOB AT P.A. SHAH RD

Unit Rate (Rs.) Total (Rs.)

Upgradation of Guest House of BOB at P.A.Shah Rd. Consultant ; ALINDA




f) Required module number of mounting frame withsheet cover

g) A two/three way circular box to be provided foreach light point in brick wall.

i) - Length upto 6 metre Nos. 42

Note :

i) Min 2 nos. PVC conduit of 20mm dia to be laidbetween switchboard and junction box which isvertically in the same line with the switch board, ifrequired.

ii) All junction boxes shall be mounted in the samelevel in their respective room.

iii) Vertical position of junction box shall be fixed inthe same line with the switchboard.

A2) 6A receptacle (RA Type) wiring from nearestJB/Switch Board to independent 6A, 5 pin, 240Vreceptacle by supplying & laying of 1100V grade 2-1/Cx1.5 Sq.mm + 1-1/Cx1.5 Sq.mm for earthingPVC insulated (FRLS) copper wire through PVCconcealed conduit in wall/floor with groove cuttingand making good damage to original finishincluding supply of necessary sheet metal pull box/circular box with 5mm thick acrylic sheetcover(Make- Polycab,Finolex, Mescab or othersimiler make)

Meter 50





A3) 16/6A (RB Type) receptacle wiring fromDistribution Board/nearest JB to independent16/6A, 6 pin, 240V receptacle by supplying &laying of 1100V grade 2-1/Cx2.5 Sq.mm + 1-1/Cx1.5 Sq.mm for earthing PVC insulated copperwire through PVC concealed conduit in wall withgroove cutting and making good damage tooriginal finish including supply of necessary sheetmetal pull box/ circular box with 5mm thick acrylicsheet cover (Make- Polycab,Finolex, Mescab orother similer make)

Metre 30

A4) Circuit wiring from Distribution Board/nearest JB toSwitch Board by supplying & laying of 1100Vgrade 2-1/Cx2.5 Sq.mm + 1-1/Cx1.5 Sq.mm forearthing PVC insulated (FRLS) copper wirethrough PVC concealed conduit in RCC slab/wallwith groove cutting and making good damage tooriginal finish including supply of necessary sheetmetal pull box/ circular box with 5mm thick acrylicsheet cover

Metre 35

A5) Sub Main wiring or power unit for A.C wiring bysupplying & laying of 1100V grade 2-1/Cx4 Sq.mm+ 1-1/Cx2.5 Sq.mm for earthing PVC insulated(FRLS) copper wire through prelaid PVCconcealed conduit in wall with groove cutting andmaking good damage to original finish includingsupply of necessary sheet metal pull box/ circularbox with 5mm thick acrylic sheet cover(Make-Polycab,Finolex, Mescab or other similer make)

Meter 30





A6) Main wiring by supplying & laying of 1100V grade4 core16 Sq.mm AL /A cable+ 2 nos 8 SWG GIwire for earthing through in wall with necessarytermination and clamping or groove cutting andmaking good damage to original finish .(Make-Laser, crystal .Hevell's or other similer make)

Metre 20

B. DISTRIBUTION BOARDS

[As per Dwg. and Specification]

B1) LIGHTING/ POWER TPN DISTRIBUTIONBOARD

Nos 2Supply and Installation of sheet steel (1.2 mm

thick) enclosed, double door, wall mountedDistribution Boards complete with necessarymounting, internal wiring and conduiting .(Make-Hevell's , ABB or other similer make)

a) Incomer with63A, 415V, 4P, RCCB (100mA) - 1 No.

b) Busbar415V, 63A, 3 PH, 4W, 50 Hz, 10 KA busbar - 1No.

c) Outgoing with6A - 32A, SP MCB (C curve) - 18 Nos.





C) RECEPTACLES

C1) Supply and Instalation of 16/6A, 6 Pin, 240Vreceptacle (RB type) with safety shutter and 16Amoduler type switch complete with M.S. Box andmounting frame with cover plate.(Make- Anchor ,MK, ABB or other similer make)

No. 8

C2) Supply and Instalation of 6A, 5 Pin, 240Vreceptacle (RA Type) with safety shutter and One6A moduler type switch for complete with M.S.Box and mounting frame with cover plate.(Make-Anchor , MK or other similer make)

No. 10

C3) Supply and Instalation of RJ 12 telephone socketcomplete with M.S. Box and mounting frame withcover plate.(Make- Anchor , MK , ABB or othersimiler make)

No. 2

C4) Supply and Instalation of RJ 45 computer socketcomplete with M.S. Box and mounting frame withcover plate.(Make- Anchor , MK , ABB or othersimiler make)

No. 2

C6) Supply and Instalation of fan speed electronicregulator moduler type to be mounted in switchboard complete with wiring by 1Cx1.5 sqmm PVCinsulated wire.(Make- Anchor , MK or other similermake)

No. 8





D. CONDUIT

Supplying & laying of PVC conduit to be fixed inwall / floor after proper chasing. The wall/floor tobe finished as it was before, after embedding theconduit. (Make- AKG , PICISION or other similermake)

D1) i) The following sizes of conduits

a) 20 mm dia Metre 300

b) 25 mm dia Metre 40

D2) Supply and Installation of flexible PVC Conduit offollowing sizes :

a) 20 mm dia Metre 10

b) 25 mm dia Metre 10

D3) Supply and installation of medium duty G.I.Conduit/Pipe of following sizes including allnecessary accessories required for fixing theconduit on brick wall.(Make- TATA, AKG or othersimiler make)

a) 25 mm dia conduit/pipe Metre 20





E) MISCELLENEOUS ITEMS

E1) Supply and drawing of DIA 0.5 mm, three pairTelephone Cable with necessary conection asrequired (Make- Polycab,Finolex, or other similermake)

Meter 20

E2) Supply and fixing TPN 63A MCB (C curve) withsheet steel encloser in iron fream with necessaryconnection as required ( Make- L&T,Havell's, ABBor other similer make)

No 2

E3) Supply and fixing flush-type power unit completeof DP MCB,SP starter ( 4.75A-7.50A), socket &plug with indicating light with necessary mountingand connection as required for 1 Ton A.C Unit (Make- Northwest or other similer make)

No 6

E4) Supply and fixing of fan hook for hanging ceilingfan with all necessary mounting as required

No 8

E5) Supply and fixing of 600 mm sweepstanding/padestal fan with all necessary mountingand connection as required (Make- USHA ,ORIENT or other similer make)

No 4





E8) Supply and fixing of 1200 mm sweepceiling fanwith all necessary mounting and connection asrequired (Make- USHA , ORIENT . Hevell's orother similer make)

No 8

E9) Supply and fixing of 300 mm dia exhust fan withlouver and all necessary mounting and connectionas required (Make- USHA , ORIENT, Hevell's orother similer make)

No 4

E10) Supply and fixing of TL luminaires like Philipsmake TMS 2005/140, 1X TL 40W lamp with allnecessary accessaries like ballast ,mountingarrangment & connection as required (Make-Philips , Bajaj or other similer make)

No 8

E11) Supply and fixing of TL luminaires like Philipsmake TMS 15/120, 1X TL'D 18W/ TL 20W lampwith all necessary mounting & connection asrequired (Make- Philips , Bajaj or other similermake)

No 6

TOTAL

GRAND TOTAL OF ALL ELECTRICAL WORKS


ESTIMATE FOR FURNITURES AND FURNISHINGS OF GUEST HOUSE OF BOB AT P.A. SHAH RD.

SI.No. Description Unit Quantity Rate(Rs.) Amount (Rs.)

1.0 (1500x2000) Wooden double bed ZUARI Optima model English cot or similar make no. 2

2.0 (900x2100) Wooden double bed ZUARI Optima model English cot or similar make no. 4

3.0 Wooden dressing table ZUARI Cosmo or similar make no. 2

4.0 Wooden stool ZUARI Cosmo or similar make no. 2

5.0 Wooden 2 door wardrobe ZUARI Cosmo no. 4 or similar make

6.0 Wooden bed side t5able ZUARI Cosmo no. 4 or similar make

7.0 Wooden dining table with glass top (1500x1000) no. 2

8.0 Wooden dining chair no. 12

9.0 Zeon fabric sofa 3+1+1 ZUARI living furniture orsimilar make no. 2

10.0 Mini wall unit for T.V. & book shelf ZUARI living furniture or similar make no. 2

11.0 Centre Table size 80x40x45 ZUARI living furniture or similar make no. 2

12.0 wooden cabinet with steel shelf for kitchenand drawers with telescopic channels as per design no. 2

13.0 Relaxon mattress for double bed (1500x2000) no. 2

14.0 Relaxon mattress for double bed (900x2000) no. 4

15.0 Reliance pillow no. 8

16.0 Chromium plated curtain holder with Fabrick curtain for doors & windows no. 18

17.0 Bed spread for Double Bed set of approved brand no. 2

18.0 Bed spread for Single Bed setof approved brand no. 4

TOTAL COST FOR FURNISHINGS

Note : All items to supplied as per approval of the architect / authority and as per design where applicable.

bank of baroda · the estimated cost of the project is ... prior approval of the employer/...

Documents