bank of baroda amtala.pdfspecification of materials for interior work sl.no. description 1. laminate...
TRANSCRIPT
1
2.
3.
4.
5.
6.
7.
1.
2.
3.
4.a) The Tenderer shall furnish copies of :
i) IT Registration Certificate with No.
ii) Sales Tax Registration Certificate with No.
iii) Service Tax Registration Certificate with No.
iv) Electrical Contractor's License with No.
v) Electrical Supervisor’s License with No.
5.
a)
b)
c)
d)
e)
1.
2.
(Government of India Undertaking)
NOTICE INVITING TENDER
Interested agencies having experience in work of similar nature & magnitude and fulfilling the eligibility criteria given
below may download detailed tender document from Bank's Website http:bankofbaroda.com/tenders.asp
marked Annexure - IV
The tenderer should have completed in last three Financial years (i.e. current year & two previous financial year) in
Bank, Govt. or Govt. undertaking and Financial Institutions, Corporate Sectors, etc. minimum 3 (three) similar
composite work (Interior Furnishing & Electrical) costing not less than Rs. 15.00 lacs in single contract. (Work order &
completion Report in support must be submitted & marked as Annexure-I)
The total contract amount received by the Tenderer during the last 3 financial years should be minimum as 40.00 lacs
per year in contract work. In support of this the Tenderer should submit audited sheet duly Certified by the Chartered
Accountant & marked Annexure-II.
The Tenderer should produce Solvency Certificate from any Nationalised / Scheduled Bank for an amount of 200% of
the advertised Tender value marked Annexure-III.
Part 'A' envelope (Technical Bid) shall contain : Earnest Money, the documents for satisfying eligibility criteria & the
technical & financial stipulation, if any, of the tenderer & Part 'B' shall contain : financial bid along with a copy of the
tender document, duly signed in all pages both shall be separately sealed & submitted in another sealed envelope
to the Deputy General Manager, Bank of Baroda, West Bengal, Sikkim & A & N Island, BARODA TOWER, Plot No. 38/2,
Block GN, Sector-V, Salt Lake City, Kolkata : 700 091, before 2.30 P.M. on 06.01.2012 along with Earnest money
amounting to Rs. 14,000/- by Bank Draft / Pay order in favour of Bank of Baroda shall be submitted in Part 'A'.
MINIMUM ELIGIBILITY CRITERIA (Shall be submitted with Part A of the Offer)
Part 'A' will be opened at 3.30 p.m. on 06.01.2012.
Bank of Baroda, West Bengal, Sikkim & A & N Island invites sealed tenders in two bid system for the proposed
Civil,interior & electrical work of Amtala Branch, Mita Market, Kanya Nagar,Diamond Harbour Road PO Amtala Dt 24
Paragana(S), Pin-743398. The work is to be completed within 30 days.
List of important plant & machinery available on hand (own) and proposed to be inducted (own & hired to be given
separately) for carpentry & electrical work (marked Annexure-X)
List of works completed in the last (three) financial years under Bank / Govt., Semi - Govt,Govt. undertaking /
Corporate Sectors giving description of work, organisation for whom executed, approximate value of contract at the
time of award, date of award and date of scheduled completion of work, date of actual completion and final value
of contract should also be given (marked Annexure-XI)
marked Annexure - V
Bank of Baroda
List of works in hand indicating description of work, contract value, approximate value of balance work yet to be
done and date of award (marked Annexure-XII)
Contractors will be required to arrange for their own storing. Dismantled materials are to be carted away from site at
their own cost and disposed of in conformity with Municipal regulations.
Tenderer who will quote the rate must have a local office at Kolkata. This is absolutely essential for day to day
supervision & coordination of the work at site.
All informations are to be fully authenticated & documented failing which the documents submitted will not be accepted.
GENERAL TERMS & CONDITIONS
The tenderer are to visit the site and acquaint themselves with site conditions before quoting rates.
Part 'B' of the tenders will be opened for those only who fulfils the qualifying criteria given in the tender document.
The unopened part 'B' along with Earnest Money deposit for those not fulfilling qualifying criteria will be
returned.Alternation/change in tender documents is to be authenticated.
Clarifications, if any, required on drawings, schedules, specifications, etc. can be obtained from our Consultant
M/s.KALPANGAN CONSULTANT PVT LTD, Flat No 9,4 Dr Sundari Mohan Avenue Kolkata 700014,
Phone No -033-22842494,9830162952
The Tenderer should also submit the following documents along with the Tender.
List of technical persons available on hand, years of their association with the firm & proposed to be engaged for the
subject work, if selected (marked Annexure-IX) ;
The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders
without assgming any reason whatsoever.
marked Annexure - VI
marked Annexure - VII
marked Annexure - VIII
1
3.
4.
5.
6.
7
8.
9.
10.
11.
Payments will be made once on completion by the Employer within 15 days after certification of bill by the
Consultant 10% of the total payable amount is to be retained as retention money and will become due for release
after expiry of six months from the date of completion of the installation & subject to satisfactory maintenance of the
executed work.
Tenders addressed to Deputy General Manager, Bank of Baroda, West Bengal & Sikkim Region and submitted at his
office at BARODA TOWER, Plot No. 38/2, Block GN, Sector-V, Salt lake City, Kolkata : 700 091, before 2.30 P.M. on
06.01.2012, accompanied by Earnest Money amounting to Rs.14,000/- by Bank draft payable to Bank of Baroda and
other documents as mentioned in NIT. Part 'A' of the tenders will be opened at 3.30 P.M. on the same date.Part 'B' will
be opened immediately after opening of Part 'A'.
The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all tenders
without assgming any reason whatsoever.
The arrangement for “ Wire Management " is to have prior approval of the Client.
The quoted rates shall remain firm during the entire currency of contract. No price variation for any causes
whatsoever, shall be entertained.
The time of completion shall be 30 days from the date of placement of order.
The offer shall remain valid for acceptance for a period of 30 days from the date of submission of offer.
The quoted rates, are to include cost of all materials, labour and or any other material, all statutory taxes, transport,
handling delivery at site and installation, complete in all respect, as per drawing, directions or instructions of
Employer/Consultant. The quoted rates are also to include dismantling of partitions, counters, old electrical wirings
etc. and stacking serviceable materials and disposal of debris, etc.
Prior approval of the Employer/ Consultant shall be obtained for colour and thickness of laminates to be used in the
work.
2
SPECIFICATION OF MATERIALS FOR INTERIOR WORK
Sl.No. Description
1. Laminate
2. Ply & Block Board
3. Glass
4. False Ceiling & Accessories
5. Veneer
6.Textured Wall Paint
7. Glue
8. Locks
9. Aluminium Hardware Fittings
10. Brass Hardware
11.
Floor Spring
12. Screws
13. Casters
14. Sliding Drawers / Channels
15. Furnishing Fabric
16. Leather Foam
17. PVC Flooring
18. Carpet
Efficient Gadjets
Evrite Agencies Pvt. Ltd. / Nita Floor Spring
Nettle Fold
ICI, Spectrum, Heritage
Godrej / Secur / Yale
Brass Arts / Vijoy
Glamour or Favourite (Balla Industries)
Woven type "Harmony" range from "Vimal"
or equivalent
Bhor Industries or equivalent
Armstrong / Krishna / Premier
Durian / Century / Archid
ICI, Jenson & Nicholson / Asian paint /
Berger
Make (s)
Metako / Allen / Crown with ISI Mark
India Gypsum Ltd.
Marino / Greenlam / Century / Archid
Green / Century / Archid / Austin
Modi / Indo Ashahi / Float Glass India Ltd.
Earl Behari / Efficient Gadjets
3
SPECIFICATIONS OF MATERIALS FOR ELECTRICAL WORK
Sl.No. Description
1. Switch fuse / fuse switch units (HRC) (32A TPN & above)
2. Timer (TSQ 100)
3. Voltmeter & Ammeter
4. Voltmeter & Ammeter selector switches
5. Phase indicating lamp
6.
7. Capacitor
8. HRC fuses
9. Power Cable : XLPE
10.
11. HRC fuse base & carriers.
12. PVC terminals
13. 1.1 KV grade PVC insulated armoured aluminium cable (ISI marked)
14. 1.1KV 660V grade PVC insulated & sheathed / insulated copper wire &
flexible cords (ISI marked).
15. Moulded case circuit breaker
16. RCCB / ELCB
17. Switch fuse with rewirable fuses. (6A & 32A TPN)
18. Isolator
19. Changeover switch (on load type)
20. MCB distribution board
21. Distribution fuse board with rewireable fuses
22. Miniature circuit breaker / MCB type isolator
23. Contractors
24. Auxiliary contractor
25. 1/16 Amp Piano key type switch / flushed type plug socket
26. 6/16 Amp modular switch / socket, module plate & mounting M.S. /
PVC box.
27. 300W, 2 module electronic regulator
KENBAR / HAVELLL’S / ELCON / HPL /
CONTROL & SWITCHGEAR.
LEGRAND/ SIEMENS
A E / KAPPA SEGC & CONTROLS / CONTROL
CROMPTON/SIEMENS
TATA LEVERT/NEUMERIC/ KIRLOSKAR
GLOSTER/INCAB/POLYCAB/CINOLEX
GE power / SIEMENS / L & T / SCHNEIDER
SWITCHGEAR
GE Power/SIEMENS/L&T/SCHNEIDEV
LEGRAND/ SIEMENS / L&T
HAVELL’S / BPC / BOSMA
UNIVERSAL / GLOSTER / NATIONAL / NICCO
/
L & T / SCHNEIDER/LEGRAND
CPL (Genius) / ANCHOR (Roma) / CRABTREE
/
MK
ANCHOR (Roma) / CRABTREE / MK
ANCHOR / PRECISION / SSK & RIDER
HAVELL’S / STANDARD
NATIONAL/FINOLEX/ HAVELLS
LEGRAND / SIEMENS
SIEMENS / L & T/BCH
SIEMENS / L & T
KAYCEE / L & T
Make (s)
HAVELL’S / STANDARD
Vaishno / SIEMENS / ROSS controls
L & T
GE power / SIEMENS / L&T / Schneider
A. E. / IMP
ELMEX / ESSEN
4
Sl.No. Description
28. Ceiling rose
29. Holder
31. Luminous indicating type buzzer with cancellation push.
32. Alarm bell.
33. G.I. pipe
34. Steel conduits (conforming to IS in all respects)
35. Black enamelled
36. Galvanised
37. Non-metallic PVC conduit pipe
38. Compression type brass gland
39. Cable termination socket
40. Light fitting & lamps
41. Decorative/Ornamental /Chandelier / Light Fittings
42. Ceiling Fan
43. Exhaust fan
44. Industrial type socket & top
45. Telephone wire
46. Telephone Socket
47. Network Cable
48. Contractors
49. STARTERS
FINOLEX or equivalent
L & T / SIEMENS
CROMPTON / POLAR / KHAITAN
NORTH WEST / CABTREE
CROMPTON / POLAR / KHAITAN
HAVELL’S / CROMPTON / LEGRAND
FINOLEX / RRK/NATIONAL
CRABTREE/MK
CROMPTON / POLAR / KHAITAN / EPC
DOWELL'S
WIPRO or equivalent
DOWELLS / JOHNSON / COMET
PLAZA / KALINGA/ PRECISION/AKG or
equivalent
KHERAJ / GETCO
KAY / EPP / ANCHOR / JJ
NATIONAL / HOMA / EQUIVALENT
Good local make with minimum wall
thickness of 3 mm. for 19 / 20 mm. and 25mm
sizes & 2.5 mm. for 12mm. sizes
BEC / SUPREME / AKG
BEC / SUPREME / AKG
BST / BANSAL
KAY / EPP / ANCHOR / JJ
Make (s)
5
SL. ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO. (Rs.) (Rs.)
1 Split Level False Ceiling : GYPSUM
Providing & fixing suspended gypboard false ceiling, which includes Providing
& fixing G.I perimeter channels of size 27mm, 0.5mm thk having one flange of
20mm & another flange of 30mm along with perimeter of the ceiling, screws
fixed to brick wall/ partitions with the help of rawl plugs & Screws. Then
suspending G.I intermediate channels of size 45mm, 0.9 mm thk with two flanges
of 15mm each from the soffit at 1200mm centres with stell G.I hanger of width
25mm, 0.5mm thk fixed to soffit with GI cleat & steel expansion fasteners.
Ceiling section of 0.5mm thickness having knurled wedge of 51.5mm and two
flanges of 26mm each with leafs of 10.5mm are then fixed to the intermediate
channel with the help of connecting clips and in direction perpendicular to the
intermediate channel at 450mm centres. 12.5mm tapered edge gypboard is then
screwed fixed to ceiling section with 25mm dry wall screws at 230mm centres
Screw fixing will be done mechanically either with screw driver or drilling
machine with suitable attachment. Finally the tapered and squared edges of the
boards are jointed at finished to give a flushed finish with requisite jointing
compound, paper tapes, finisher and premier suitable for Gypsum plaster
boards. The entire work shall be finished as per instructions of the Architect.
And also finished with two or more coats of acrylic emulsion paint of approved
shade and make . No extra cost shall be entertained in completing the entire
work in all respect.
NB : No extra amount will be given cutting for Light Points, and other items etc.
Hangers have to be from the true ceiling. 1100 SQFT
2 FALSE CEILING (Armstrong)
Providing & fixing in position false ceiling in Armstrong
600 x600 mm x 15/16 mm Dune Supreme RH 99 Prima tile
with Tegular edge framework as specified by Armstrong Co.
with suspenders wherever required. Making cecessary
framework for A.C ducting, if any and cecessary cutouts for
diffusers and light fittings, taping and finishing to proper line
& level, including making grooves and trap doors for A.C 380 Sqft.
unjit in 18mm thick M.R. Grrade Plywood with Stainless Steel
hinges & locks with moulding 1" x 1" for edges including finishing
with White Plastic Emulsion Paint etc. complete in all respects.
(Note- Only the plan area will be measured for payment.
No extra payment will be made for cutouts, grooves
moulsings etc.)
2 PLASTIC EMULSION PAINT
Providing and applying two coats of Plastic emulsion paint of approved make &
colour over a coat of primer of approved brand including smoothening the surface
by sand-papering to the walls, columns .
1500 SQFT
3 DISTEMPER PAINT WORK
Providing and applying two coats of oil-bound Distemper paint of approved make
& colour over a coat of primer of approved color & brand in the Toilet, pantry ,
record room & UPS rm.I/c necessary scrapping of old surface & new
surface preparation of walls and ceiling 1800 SQFT
4 SYNTHETIC ENAMEL PAINT
Painting all the windows,grille,collapsible,rolling shutter gate & walls of the toilet,
canteen with two coats of Synthetic Enamel Paint over a coat of primer
of approved shade, make & color at all heights & levels complete as directed as
per manufacturer's specs. 1200 SQFT
FOR BANK OF BARODA
I) SCHEDULE OF CIVIL WORKS
RENOVATION OF AMTALA BRANCH AT AMTALA , 24 PARGANAS(S)
SL. ITEM DESCRIPTION QTY UNIT RATE AMOUNT
NO. (Rs.) (Rs.)
5 TEXTURED WALL FINISH
Providing & applying texture wall paint(roller/spray)as per
manufacturer's specification of approved colour & brand
at all heights in the customer lobby as instructed. 200 SQFT
6 VETRIFIED TILES FOR FLOOR
Providing & laying (min) 8mm thick vitrified tiles of approved make ( Johnson/
MARNONITE Brand) & design to floor at all levels of the banking hall
fixed to the existing floor with chemical adhesive "Fevimate" of Pidilite or similar
approved adhesive of adequate thickness to suit reqd. level I/c preparing the
existing surface as necessary with supply of requisite materials all complete
as per manufacturer's Specification. Rate to include provision for simple band
patterns in a different shade. Size of tiles:600mmx 600mm
The cost also includes the rate for removal of the rubbish
from the site as per KMC rules. 1500 SQFT
7 CERAMIC TILES FOR FLOOR in toilets, Pantry.
Laying as per manufacturer's specification 300 x300 mm
plain coloured ceramic rectified anti-skid and anti-wear
creamic tiles of approved make, quality & shade on
the floor & skirting complete as per manufacterer's
specification & as directed after removal of the top
layer of the existing floor as directed.The cost also
includes the rate for removal of the rubbish. 235 SQFT
8 CERAMIC TILES FOR Dado in toilets and pantry
Providing and fixing 300mmx150mm glazed ceramic tiles
of approved make & quality and shades as per direction
on the walls of the toilets-
i/c.all labour & materials & setting in 1:3 cement mortar
and fixing stonechips of required size with Araldite
at the back of the tiles and joints finished with perfect
finishing & maintaining perfect horizontal and vertical
lines and leveled surface at all heights and levels. 450 SQFT
9 KUDDAPA STONE PANTRY COUNTER ( 2'-0" WIDE )
Providing and laying platform of 3/4" thk. & 2’-0” width (clear)and at 10 RFT
2’-8” height (top)above ffl. of approved kudappa with champhered and
machine polished edge. It shall be supported on wall on 1 ½” thk
horizontal cudappah. Rate shall include the profile cutting and
fixing of below counter wash basin/kitchen sink & polishing the
exposed edges of granite. A 2” kudappa facia shall be provided
below the champhered edge.
10 TOILET REQUISITES
a. Providing fiting & fixing C.P towl ring complete with
C.P screws and fittings etc. 2 Each
b. Providing fiting & fixing PVC Liquid Soap dispenser
with C.P screws etc. complete 2 Each
c. Providing fiting & fixing polished mirror of superior glass
aproved quality complete with 6 mm asbestos sheet
ground fixed to wooden cleat with C.P brass dome
shape screws washer etc. complete 550 mm x 450 mm 2 Each
11 P & F White vitreous wash hand basin with 15mm dia
brass C.P. pillar cock of ESSCO make
Size - 550 x 400mm 2 Each
12 Flat back urinal size 440 x 265 x 315mm of white
colour vitreous with white p.v.c.waste pipe of 32mm
dia.upto 750mm long,coupling fannel, saddle etc complete. 1 Each
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
13 P/F/F I.P.W.C. with 'S' trap and 10 litres capacity
low level Flushing cistern of white vitreous ware I/C of
joining materials etc. all complete. 1 Set
14 P/F/F E.P.W.C. with 'S' trap and 10 litres capacity
low level Flushing cistern of white vitreous ware I/C of
joining materials etc. all complete. 1 Set
15 P/F/F following Toilet taps & cocks of Essco make with
wall flange & C.P. extension piece .
(i) 15mm dia brass C.P. Bib cock 3 Each
(ii) 15mm dia brass C.P. Angular cock 5 Each
(iii) 15mm dia brass C.P. connector upto 600mm long 5 Each
16 Stainless steel sink
P/F/F Stainless Steel sink with single bowl of Nirali
make,integrated waste size-over all 600 x 450 mm.
with a pair of C.I.bracket, fitted with 15mm dia. Brass C.P.
pillar tap & 32 mm .dia white pvc waste pipe with brass 1 No.
coupling etc. complete .
17 G.I. & H.C.I. PIPE WORK
Removing carefully only the existing damaged G.I.Pipe
line, waste line, soil line, floor traps etc.and if damaged and
removing the same away from the site & mending good
damages by laying new concealed G.I./ HCI pipe work required 1 Job
for the new toilet layout.
18 MASONRY WORK
BRICK WORK FOR REQUIRED FOR CLOSING THE HOLES FOR LOWERING 1 Job
& CHANGING THE POSITON OF EXISTING A.C. WORK
19 PLASTER OF PARIS
Providing & laying 3mm thk. Plaster of Paris punning on the walls
under the false ceiling and in ceiling of areas not under false ceiling. 1500 SQFT.
as directed on Grd. Floor
20 POP CORNICE
Providing and fixing Plaster of paris cornice( out of 65x65 mm
sections ) at junctions of false ceiling, walls and at other locations
including Plastic emulsion paint finish. 180 Rft.
21 DISMANTLING WORK
Dismantling carefully existing partition walls, Flooring & dado
tiles of toilets, sanitary fixtures, CP fittings etc as directed,
& removing of the rubbish from site as per CMC rules. 1 Job
TOTAL
SL.No. Particulars with Description QNTY Unit Rate Amount
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
1 DOUBLE SKIN PARTLY GLAZED FULL HEIGHT PARTITION
Supplying and erecting Full Height Partly Glazed partitions
(up to 8'-6" high) as per drawing and conforming to the
following specifications :
Basic Framework : Well seasoned Malayasian sal wood
sections, treated with two coats of wood preservatives, 50 mm
x50mm (minimum) at maximum 600 mm horizontal or
vertical spacing as per site conditions.Vertical Members shall
be suitably anchored and at ceiling level to ensure rigidity.
Exposed frame members in the glazed portions shall have
wider spacing ( approx. 1800 mm clear ) as per instructions.
Exposed members shall be finished with 1.0mm thick laminate
sheet of same or combination shades, over 2x6 mm BWR
grade plywood facing including 4x4 mm grooves at locations
as per instruction.
Skin Membrane : (Opaque portion upto 900mm from floor
level with 2x6 mm thick BWR grade plywood on each face
with 4x4mm grooves formed at the top layer as per drawings/
instructions.
Finishing : 1.0mm thick laminate sheet of same or
combination shades as per instructions.
Skirting: 100mm high x 12 mm thick polished white or steam
beech wood skirting on both faces with NC lacquer in Matt finish.
Glazing : 6mm thick clear float glass fixed with continious
White or Steam Beech wood glazing beads of approved shape
( finished 35x25 mm) all around, polished & coated with NC
lacquer finish. The rate should also include cost of decorative
etching on one side of the glass.
Quoted rates shall include all necessary materials,accessories
and also allow provisions for electrical/telephone/computer
wiring conduits and switch boxes, etc ( Materials of wiring
conduits and switch boxes shall be separately paid for.) 170 Sqft.
4 FULL HEIGHT SOLID PARTITION
Supplying and erecting full height opaque partitions ( from 8'6"
10ft. high) as per drawing and conforming to the following
specifications :
Basic Framework : Well seasoned Malayasian sal wood
sections, treated with two coats of wood preservatives, 50mm
x 50mm (minimum) at maximum 600 mm horizontal or
vertical spacing as per site conditions.Vertical Members shall
be suitably anchored and at ceiling level to ensure rigidity.
Skin Membrane : 2x6 mm thick BWR grade plywood on each
face with 4x6mm grooves formed at the top layer as per
drawings/instructions.
Finishing : 1.0mm thick laminate sheet of same or
combination shades as per instructions on both sides.
Skirting: 100mm high x 12 mm thick polished white or steam
beech wood skirting on both faces with NC lacquer in Matt finish.
Other specs same as Item no.3 240 SQFT
5 LOW HEIGHT PARTLY GLAZED WOODEN PARTITIONS
Supplying and erecting low height partlyglazed partition (varying from
1050 to1500 mm high) as per drawing and conforming to the following
specifications :
Basic Framework : Well seasoned Malayasian sal wood
sections, treated with two coats of wood preservatives,50mm
x 50mm (minimum) at maximum 600 mm horizontal or
vertical spacing as per site conditions.
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
5) Skin Membrane : (Opaque portion upto 900mm from floor
FOR BANK OF BARODA
II) SCHEDULE OF FURNISHING WORKS
RENOVATION OF AMTALA BRANCH AT AMTALA , 24 PARGANAS(S)
contd level with 2x4 mm thick BWR grade plywood on each face
with 4x4mm grooves formed at the top layer as per drawings/
instructions.
Glazing : 12 mm thick clear float glass fixed with continious
White or Steam Beech wood glazing beads of approved shape
( finished 35x25 mm) all around, polished & coated with NC
lacquer finish. The rate should also include cost of decorative
etching on one side of the glass.
Finishing : 1.0mm thick laminate sheet of same or
convination shades as per instructions.
Edge Moulds : All free top/end surfaces shall have polished
white or steam beech wood moulds of apprived shape ( from
80x 25mm sections) with LC lacquer in mat finish.
Skirting: 100mm high x 12 mm thick polished white or steam
beech wood skirting on both faces with NC lacquer in Matt finish.
Quoted rates shall include all necessary materials, accessories
and also allow provisions for electrical/telephone/computer
wiring conduits and switch boxes, etc ( Materials of wiring
conduits and switch boxes shall be separately paid for.) 250 Sq.Ft.
6 SOLID FLUSH DOOR
Supplying and fixing in position overall 37mm thick solid core
hot pressed phenol formaldehyde bonded approved flush door shutter
finished with 1.0mm thick laminate sheet of approved shade and quality
on both sides of the door shutter including cost of hardware fittings e.g.
mortice locks, brass hinges, door handles etc. of approved make
a) Average size of shutter (D1) : 3'-0"x 7'-0" 3 No.
b) Average size of shutter (D2) : 2'-6"x 7'-0" 3 No.
7 WICKET GATE
P/F/F Wicket gate made up of 32mm flush door finished with 1mm wenge
color laminate. The door shall have SS finished door lock, heavy duty
brass hinges, SS handles, door stopper etc. as per schedule
The skirting shall be finished with 3” wide 1.00mm brushed SS laminate
Refer dwgs for details .Wicket gate have to match with the Low height
Partitions. 28 Sqft.
8 PARTLY GLAZED DOOR SHUTTER
Providing, fixing & fitting in position Door shutters made of specification similar
to that of item (5) hinged on 3 nos. brass hinges as required with the exception
that the wooden frame is of section 2" x 1.5". The cost of all fittings
:handle locks, aldrop handles, heavy duty door closer, night latch all of appoved
make to be included.The glazed portion will be between 3'-0" to 6'-8" of 5mm thk.
glasspanes of approved quality.Average size of shutter (D3) : 2'-6"x 7'-0" 2 Nos.
9 WOODEN PANELLING ON PILLARS
Wall Panelling / column encasing ( upto 2700 mm high ) works
as per drawing and conforming to the following specifications:
Basic frame work
Well seasoned Malayasian Sal Wood sections, treated with two
coats of wood preservatives, minimum 50x25 mm, at suitable
horizontal / vertical spacing not exceeding 600 mm c/c.
Skin Membrane:6 mm thick BWR grade plywood with 4x4mm grooves formed
at top layer as per drawing/ instructions.
Finishing:1mm thick laminate sheet of same or combination shades as per instructions.
Skirting
100mm highx12mm thick polished white or steam beech wood skirting with NC lacquer finish.
Quoted rates shall include all necessary materials, accessories
and labour and also allow provisions for electrical/telephone/
computer wiring conduits and switch boxes etc. complete with
necessary jacking /thickening of panels to accommodate conduits/ switch
boxes.(Materials for wiring conduits and switchboxes shall be separately paid for). 160 Sqft.
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
10) Providing, fitting & fixing the cash counters & Cash cabin along
with partitions all complete:
Internal Size of the cash cabin :4'-6" to 5' (w) x 5'-6"(h) x 7'-0"(l)
a) Providing fixing & fixing 3' wide & 2'-6" high staff working top made of
18mm thick BWP block board of approved make finished with 1.0 mm
laminate of approved make & shade.
The customer transaction top shall be 1'-6" wide projecting 6"on the
customer side at a height of 1' above the staff working counter thus
making a total height of 3'-6". The customer top is made of 3/4" thk
.Granite top(Black galaxy) placed on 18mm thick BWP blockboard
which is cut & shaped with edges round polished.
Below the working top/counter will be 1'-6" wide drawer unit consisting
of 3 nos. drawer on slide channels on one side & metallic CPU trolley
on the other side with key board tray with slide channels & foot rest
in between for each of the cash counters
Below the Transaction top the portion which is overlapping with
the working counter of 10" deep will be covered by 2 sets of
sliding shutters with a intermediate shelf with all locking arrangement
for keeping currency notes.
Both the staff working top & the transaction top is rested &
supported together by a front Apron or Double skin partition
There will be neccesary grooves between the two different
decorative laminates as shown in the detail drawing & as directed.
The counter will be provided with wire manager. The front portion
of cash cage above the transaction top(from 3'-6" to 5'-6" ht.)
will be provided with 2 no. of 12 mm thick float glass with a cut out
of 8" x 4" at the central bottom part of each of the transaction top. 14 Rft
10 b) Cash Cage Side, Intermediate & rear Partitions with door
The intermediate/side/rear partition with doors between
Cash Cabins will be of same specification as Partly glazed
Wooden Partition of Item No. 2 upto 5'-6" height with the
exception that the opening above 3' 6" height upto 5'-6" is to be
covered by the strips of 12mm thk.glass fixed. All exposed edges
of the BWP ply & blockboard are to be finished with 12 mm thk.
Rubber wood lipping which are to be polished as directed.
Provision for extra wooden frame work of same section
for intermediate glazing to be included in the rate.
There will be provision for small trays/windows for transfering
of small copy either from the banking area to the cash cabins
or between the cash cabins as directed by the architect.
The cost of all fittings of the door :handle locks,aldrop handles,
door closer, night latch all of appoved make of the doors
wherever required in the cash section to be included. 380 SQFT.
11 EXECUTIVE WORKSTATIONS
Providing, fixing and fitting in position free standing work station
made of 19 mm thk. BWP Ply + 1.0 mm. Laminate of
approved make and colour for the table top, sides & front apron
The table is supported on the left side by a 1'-6" wide &
2'-0" deep drawer unit consisting of a tea tray, one drawer
& a shuttered cabinet all in 1.0 mm thk. laminate finish and Ply partition
on the right side . The table is provided with a readymade metallic CPU
Holder with swivel facility, (CPU HL SW / INNOFITT systems or similar)
& readymade key board drawer of engineering Plastics (KD 575 P MT/
INNOFIT System or similar) shall be suspended below the table top.
Quoted rates shall also include cost of polished white or steam beech wood
moulding ( finished 40x20 mm section ) to edges of table top; polished
white or steam beech wood lipping (6mm thick) to free edges of block
board/ plywood surfaces; approved drawer - slides, concealed type
auto-closing shutter hinges and locks with keys in duplicate; other
necessary hardware and accessories including satin finish S.S. handles,knobs and wire
managers etc. of approved quality & the table top is finished with 5mm thick glass.
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
A) Approx. size of 1800 x 750 x 750 mm 1 No.
B) Approx. size of 1500 x 600 x 750 mm 3 No.
C) Approx. size of 1500 x 600 x 750 mm 2 No.
12 SIDE CREDENZO
The side unit is of size 3' (L) X 1'-6" (W) X 2'-6" (H)
consisting of a top row of two sets of 4" high drawers with
cabinets below with sliding shutters, made of 19mm thick
BWR grade block boards all finished in 1.0mm thk.laminate.
Exposed block board surfaces shall be finished with 1.00mm
laminate sheet of approved shade and make. Inner faces of
sliding shutters shall be polished in approved color.
Free edges of block board shall have polished white or steam
beech wood half round moulds ( out of 20 x 20 mm sections).
Inner faces of cabinet units shall be polished in approved shade
quoted rates shall include cost of necessary hardware , Viz
handles, locks with keys in duplicate, etc. 4 Nos.
13 BACK OFFICE WORKSTATION (Size: 5'(l) x 2'-6"(w) )
Providing & fixing top , side & front with 19 mm BWR block board finished
with 1.0 mm laminate.Table top edge will have 37mm thk white beach wooden moulding.
75mm x12mm thk white beach / white cedar skirting(as per design) with natural
polish should run along with entire bottom length of table front.The table will have
provision for keyboard tray ,mouse tray with pad ,CPU Trolley,foot rest with individua
drawer & storage with proper locking system.The storage complete with SS handle,
brass hinges, multi lock & other necessary hardware including wire manager.
All internal surface is to be finished with synthetic enamel.paint. 2 NOS.
14 Writing Ledge cum cheque drop-box:
P/F/F Cheque writing tables made of 1 no.19mm plywood shelf 3' (w) x
1' (d) x 6"(h) which is finished with 1mm thick Laminate on all exposed
surface. The shelf is fixed with two intermediate 8mm thk glass
partition fixed with D brackets for keeping withdrawal/deposit forms.
The table top shall be of 12mm thick plain glass fixed with SS studs
on the shelf.
Below the shelf after a 6" gap is place a cheque drop box of size :2'x
2'x 6", with 1" wide slit for inserting cheques made of 19mm thk BWP
blockboard, 1mm laminate finished.
Item is to be completed in all respects as per design, direction of the Architect. 1 no
15 FULL HEIGHT FILING CABINET/ALMIRAHS
Full height Filing cabinet/Almirahs1'-4" deep & upto false ceiling height
of 8'-6" made of 18mm BWP blockboard with intermediate shelves.The
back of the cabinet to be made of 6mm thk. BWP ply with a ply skirt-
ing/base of 100mm high.There will be three sets of shutters above 3'-6"
height below 3'-6" height & above 7ft. Height.There will be vertical divi-
ders of same block board at approx.3ft. apart on which the shutters are
hinged.All exposed surfaces are finished with 1.5mm thk.decorative
laminet of approved make & shade.All exposed edges of the commcial
ply & the block board are to be finished with 1/4" thk. Rubber wood
lipping which are to be melamine polished as directed. Cost of all fitting
like brass hinges,godrej locks,magnetic catches,powder coated"D"
type steel matt finish metal handles shall be inclusive. R.O. Sq.Ft.
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
16 Low height Filing cabinet 1'-4" deep & upto height of 2'-6"
made of 18mm BWP blockboard with intermediate shelves.
The back of the cabinet to be made of 6mm thk.BWP ply with a
BWP ply with a ply skirting/base of 100mm high.
There will be one horizontal division and vertical dividers of
same block board at approx. 3ft.apart with sliding shutters.
All exposed surfaces & the shutters are finished with
1.0 mm thk.decorative laminate of approved make & shade.
Cost of all fittings like brass hinges, godrej locks,magnetic
hinges, godrej locks,magnetic catches, steel matt finish "D"
type handles shall be inclusive.
Skirting
100mm highx12mm thick polished white or steam beech wood
skirting with NC lacquer finish. 60 Sqft
17 MAIN ENTRANCE DOOR CUM FIXED GLAZING
Providing & fixing in position Twin stile door made of 40 mm
thk well seasoned teak wood of top & bottom stiles, fixed
portion with 8 mm thk. Clear float glass & openable portion
with double shutter made of 12 mm thk clear float glass with
necessary hardware fixtures of approved make & design,
viz. double action ISI marked floor springs, on which the
shutters are pivoted at the top & bottom, brass flushbolt,
satin finish stainless steel decorative tubular handles on
both the faces,(Dorset or equivalent approx. 300mm long)
complete as per direction. Rate should include etching of the
Bank's logo & emblem on the Glass in the size & design as
approved by the architect. Wooden surface should be
polished in approved shade N.C. Lacquer in matt satin finish.
a) Openable Shutter 25 SQFT.
b) Fixed Glazing 10 SQFT.
18 WINDOW SCREEN
Providing, fitting in position 100mm vertical blinds made of
best quality PVC coated polyester fabric of approved make
& shade & to be tailored to the size of the window. 200 Sqft.
19 Display Panels
Providing & fixing in position frameless double acrlyic tran-
sparent sheet 2'-6" (l) x 1'-6" (w) mounted with mirror screws
/nuts on the wall along with all accessories complete for
display of bank's schemes/posters/notices inserted on it. 2 Nos.
20 PIN-UP NOTICE BOARD
Providing, fitting in position pin-up board made of soft
cork board finished with the fabric as approved,matching
with the colour scheme of the banking hall with a R.W.
moulding all around the edges. 12 Sqft.
21 WOODEN COUNTER FOR CANTEEN
Providing & supplying 1' 6" wide wooden counter placed against wall
made of 18mm thk. BWR Block board finished with 1mm thk. Decorative
Laminate & badam wood lipping standing on wooden posts
and finished with polish 10 RFT.
22 DRESSING TABLE WITH MIRROR FOR STRONG ROOM 1 ITEM
Mirror Size: 1'6"(W) x 3'(h)
23 POOFY WITH UPHOLSTERED CUSHION IN STRONG ROOM 1 ITEM
24 TRAP DOOR & BOXING FOR ROLLING SHUTTERS & COLLAPSIBLE GATE
Providing and fixing trap doors consisting of 1/4” thk. Marine ply
shutters with a clear opening of 4.5" opening for smooth operation
of shutters and rest is closed with mirror screws (for opening
for servicing). The shutters shall be finished with approved 1.0 mm Wenge
laminate, frame of 2”x1 ½” teak wood sections shall be provided for
proper support and strength. Rate shall be inclusive of necessary 50 SQFT
fittings like hinges(hafele/ebco make), ball catches, tower bolts, etc.
25 Dismantling Work
Dismantling carefully wooden partitions, panelling on columns, false ceiling if any,
cash & banking counter as directed etc. & removing of the rubbish from site
as per as CMC rules and also shifting of almirahs from old position to the 1 job
designated areas in the premises.
TOTAL
LESS:
26 BUYBACK of existing dismantled Partitions, Counters, of the Bank which will
not be reused & removing them from the Bank's premises.Tender will be rejected if the
contractor does not quote lumpsum amount. 1 job
NET TOTAL
Sl No. Item Description Qty. Unit Rate Amount
1.0 SWITCH/ MCB
1.1
1.1.1 63A FP SFU with HRC fuse links as main incomer with cable gland entry box. 2 Each
1.1.2 32A DP SFU with rewirable fuse links for Generator supply. 1 Each
1.1.3. 40A DP MCB Isolator with MS box for controlling LDB at exit gate. 1 Each
1.1.4 32A DP MCB, 10KA (for UPS at Branch ) 6 Each
2.0
1. Incomer: 63 A, 3 Pole, 25 KA MCCB with solid Neutral - 1 NO.
2. Outgoing:
16 / 20 A SP MCB " C " Series - 12 NOs. (For A.C. & Power points) `
40 A 4P MCB - 6Nos.(For Gen., LDBs, UPS, ATM)
3. Ammeter, Voltmeter, Selector Switches, CTs.,AE / Kappa make
4. Protective fuses for Volt Meter & Ammeter.- 3 nos
5. LED indicatore - 6 nos.
6. 40A 4 pole on- load CO switch - 1 no, Havell's Euro / HPL Socomac make. 1 Set
3.0 DISTRIBUTION BOARD
3.1.1 LDB: For Branch
i) Incomer- 1 No- 32A 2P MCB(10KA)
ii) Outgoing-10 nos. -6A/10A SP MCB(10KA) 1 Set
3.1.2 CDB:For Branch
i) 1 no - 32A DP MCB(10KA)
ii) 2 nos. - 10A SP MCB(10KA)
iii) 6 nos. - 6A SP MCB(10KA) 2 Set
III. SCHEDULE OF QUANTITES FOR ELECTRICAL WORKS
RENOVATION OF AMTALA BRANCH AT AMTALA , 24 PARGANAS(S)
Supply & erection of 415V/230V equipment individually on wall housed in
MS enclosure with metal front cover for the following:
Supply and installation of Main Electrical Panel, front attending wall
mounted ,cubicle type compermentalised made out of 14 SWG CRCA
sheet with power coated paint , GI earth bar etc comprising of the
following:-
Supply & erection of 230V SPN Wall mounting DB housed in SPN double
door DB box consisting of the following:-
Sl No. Item Description Qty. Unit Rate Amount
4.0 DISTRIBUTION CABLE / WIRE
4.1
4.1.1 35 Sq mm 4 core Al with 2 nos 10 SWG GI wire 30 Mtr
4.1.2 6 sq mm 3 core Al with 2 nos 12 SWG GI wire 70 Mtr
4.1.3 2.5 sq mm 2 core CU for UPS Plate Earthing 50 Mtr
4.1.6
10 Mtr
( Meter loop connection with Main SFU & Busbar)
4.2
4.2.1 35 Sq mm 4 core Al 4 Each
4.2.2 6 sq mm 4 core Al. 14 Each
4.2.3 4 sq mm 2 core CU 10 Each
5.0 A.C. POWER POINT WIRING
5.1.1
4 Each
5.1.2
2 Each
6.0 16A RAW POWER OUTLET POINT WIRING
6.1
2 Each
Supply & lay 1.1 KV grade PVCA AL/CU cable on wall having MS /HDP pipe
protection near floor level and clamping as required for the following:-
4 nos. 25 sq. mm. CU flexible wire through GI flexible pipe complete with end
termination with CU sockets.
Making end termination of 1.1 KV grade PVCA Al/CU cable with supply of
cable end box , brass Gland, CU crimping socket & jointing materials as
required for the following:-
A.C. power point wiring from PDB with 1.1KV grade 2 nos. single core 4.0 sq.
mm + 1 no. 2.5 sq mm ( Green colour for Earthing) PVC insulated copper
conductor wire (FR) through suitable size BEMS pipe surface on wall /
ceiling surface above false ceiling and concealed by chase cutting on wall
below false ceiling with all wiring accessories. The work includes supply &
fixing by chase cutting on wall, North West /Cabtree make Starter 11-18A (MS
housed) unit with 16A socket & matching 16A Plug top complete with all
interconnections for 1.5 and 1Ton ACs.
A.C. power point wiring from PDB with 1.1KV grade 2 nos. single core 4.0 sq.
mm + 1 no. 2.5 sq mm ( Green colour for Earthing) PVC insulated copper
conductor wire (FR)through suitable size BEMS pipe surface on wall / ceiling
surface above false ceiling and concealed by chase cutting on wall below false
ceiling with all wiring accessories. The work includes supply & fixing by chase
cutting on wall, North West /Cabtree make Starter 18-25A (MS housed) unit
with 25A socket & matching Plug top complete with all interconnections for 2
Ton ACs.
Wiring for Power outlets from DB with 1.1 KV grade 2x 2.5+1x1.5 PVC
insulated copper conductor wire (FR) through suitable size BEMS pipe
/conduit complete with 1 no 6/16A socket with 16A control switch in suitable
size modular box with front plates ( Cabtree Legrand), junction box, circular box
elbows etc and all other accessories surfaced on wall above false ceiling and
concealed by chase cutting on wall below false ceiling & making connection
complete. (Maximum 2 nos. sockets cluster in one circuit connecting by
looping method).
Sl No. Item Description Qty. Unit Rate Amount
7.0
7.1.1
250 Mtr
7.1.2
60 Mtr
7.1.3 1X 6 SQMM CU wire for earthing 50 Mtr
8.0 POINT WIRING:
8.1
having control board with modular switch mounted on suitable front
plate and housed in recessed MS box, surfaced on wall above false ceiling and
concealed by chase cutting on wall below false ceiling &
making connection complete.
8.1.1 One Light controlled by 6A switch 21 Each
8.1.2 Two Light controlled by 6A switch 10 Each
8.1.3 Three Light controlled by 6A switch 4 Each
8.1.4 Exhaust Fan point with 6A switch 4 Each
8.1.5 Bracket fan point with 6A switch 14 Each
8.1.6
11 Each
8.1.7 2 Each
8.1.8 Call bell point with bell push and bell (for manager's Chamber). 1 Each
Sl No. Item Description Qty. Unit Rate Amount
Supply draw and connect 1.1 KV grade PVC S/C multistrand CU wire FR
grade in suitable BEMS pipe/ conduit & accessories including wall cutting
for concealing in wall below false ceiling & repairing as required for the
following:-
2X4 + 1X 2.5 sq mm. (Glow sign supply, UPS & LDB DB supply, UPS
incoming / outgoing supply).
3 x 1.5 sq mm (Drawn from secondary CDB to Router outlets to provide UPS
power incase of failure of Main UPS) and for Call bell point at the entrance.)
Supply & wiring with 3x1.5 sq. mm 1.1 KV grade PVC S/C multistrand CU
wire (FR) in suitable size BEMS pipe/conduit & accessories
The point wiring also include circuit wiring with 1.1 KV grade 2 nos. single core
2.5 sq. mm +1 no. single core ( green colour for Earth) PVC insulated flexible
copper conductor wire through suitable size BEMS pipe/ conduit from DB to
Switch board, interconnection and mending good all damages to original finish.
(Max.8-10 points or 700- 800Watts per Circuit is allowed).
Modular type16A switch, 2 nos 6A 5 pin socket point mounted on suitable front
plate on separate switch board other than light / fan switch board.( at counters
/ tables/ wall etc ) Power to be tapped from nearest S.B./LDB.
Modular type 6A switch, 1 no. 6A 5 pin socket point mounted on suitable front
plate on separate switch board other than light / fan switch board. (Power to
be tapped from nearest S.B/ LDB).
9.0 COMPUTER POWER OUTLET CLUSTER POINT WIRING
9.1
9.1 1 nos.- 16A modular type switch.
3 nos. - 6/16A 5 pin modular type socket
1 each no. - Front plate & MS box.
( for Each Table & counters supply from branch UPS, 12 Each
10.0
1 no. - 16A modular type switch.
3 nos. - 6/16A 5 pin modular type socket
1 each no. - Front plate & MS box.
1 Each
11.0 FAN & EXHAUST FAN
12.1
14 Each
12.2
3 Each
13.0 Call Bell
1 Each
14.0 LIGHT FITTINGS
14.1
a) Havells' make LHCTP8414340 4X14 W, 580X 580 MM (T5) LAMPS 7 Nos.
fixing on reccessed ceiling with lamp
b) Havells' make LHCC 25218311 2X18 W, 280X 280 MM (FPL) LAMPS 12 Nos.
fixing on reccessed ceiling with lamp
c) Havells' make LHOC 10118354 1X18 W ( DI ) CFL LAMPS 10 Nos.
fixing on reccessed ceiling with lamp
d) Havells' make LHOC 04218399 2X18 W ( DI ) CFL LAMPS 10 Nos.
fixing on reccessed ceiling with lamp
e) Havells' make LHIT 11128032 1 X 28 watt FTL lamps 14 Nos.
15.0 TELEPHONE CABLE
15.1
35 Mtr
16.0 TELEPHONE POINT
16.1 5 Each
Computer socket outlet cluster point wiring with 1.1KV grade 2x 2.5 + 1x1.5 sq.
mm. PVC insulated flexible copper conductor wire(FR) through suitable size
BEMS pipe/conduit with all accessories up to connection of 2/3 nos. sockets
cluster in one circuit connecting by looping method. The work includes supply
and fixing of sockets outlet cluster components as detailed below:-
Supply and erection of the Branch UPS power outlet point from
secondary UPS supply as detailed below:-
(For Branch Router and Rack supply from secondary UPS with 3x1.5 sq.
mm. wire as detailed in item sl no 7.1.2).
Supply, erection and connection of 400 mm 230V oscillating type wall mounted
bracket Fan.
Supply, erection and connection of 225 mm 1400 rpm, 230V Heavy duty
exhaust Fan with wire guard net including wall cutting and finishing.
Supply and fixing of call bell with modular type push complete with plate & box
to be fixed at the entrance gate.
Supply, erection and connection of fluorescent / compact fluorescent / mini
halogen fitting with lamp , ballast / Transformer and other accessories for the
following:-
Supply, lay and connect PVC insulated CU conductor and armoured 10 pair
Telephone cable for the following:-
Telephone point wiring with 2 pair PVC insulated CU conductor (0.5mm)
telephone wire drawn through BEMS pipe/conduit
16.2
5 Each
16.3
2 Each
17.0 EARTHING
17.1.1
1 Each
17.1.2
1 Each
17.1.3 2 Each
18.0
18.1.1 With (25x6) mm GI flat 1 Each
18.1.2 With (25x3) mm CU flat 1 Each
19.0 Supply and lay GI flat for earthing underground /on wall including
connection for the following:-
19.1.1 (25x3)mm GI flat 30 Mtr
20) COMPUTER LAN SYSTEM :
a) Supply Laying & connection of CAT-6 wire through PVC rigid
pipe from HUB to IO box(Delink/Lucent make), complete
with accessories & 16SWG pull out wire for drawing data cable. 300 Mts.
b) Providing & fixing I/O Box with RJ 45 socket 13 Nos.
c) Supply laying of 25mmm PVC pipe ISI mark in floor / wall /wooden
partition for drawing Cat 6 wire from HUB to IO terminal. 300 Mts
21 Charges for all Liason Works in connection with arrangement of Additional 1 job
Electric Supply through the Local Electricity Authority (Mandatory Charges
shall be Paid by the Bank)
Total Amount:
LESS:
21 BUYBACK of existing dismantled light fixtures & dismantled wires
and DBs of the Bank which will not be reused & removing them from the
Bank's premises.Tender will be rejected if the contractor does 1 job
not quote lumpsum amount.
NET TOTAL
Supply and election Earth station with 600 x600x3mm CU. Plate with earth
strip / wire connecting arrangement including excavation and back filling with
25 mm dia GI pipe for watering.( for UPS Earthing)
Supply and erection of masonry pit for each Earth station having CI/RCC
inspection cover.
Supply and erection of earth bus on wall ( min. length 0.3 mtr.) on
insulator with drilled holes on the bus with GI bolt , nut , washer etc for
telephone wire drawn through BEMS pipe/conduit
Supply and erection of modular type telephone outlet RJ11 mounted on suitable
front pale housed in recessed MS box.
Supply and erection of 10 pair telephone terminal box (Krone type housed in
MS box).
Supply and erection of earth station with 50 mm dia. GI pipe 3 Mtr. Long with
earth strip connecting clamp at the top including excavation and back filling.
(For equipment earthing).
ITEM DESCRIPTION QNTY. UNIT RATE AMOUNT
NO. RS. P. RS. P.
Providing & placing in position:
1 EXECUTIVE HIGH BACK UPHOLSTERED CHAIRS FOR
BRANCH MANAGER (METHODEX MAKE) 1 NO.
2 EXECUTIVE MEDIUM BACK UPHOLSTERED CHAIRS FOR
OFFICERS (METHODEX MAKE) 3 NOS.
3 UPHOLSTERED COMPUTER OPERATOR'S CHAIR (METHODEX MAKE) 7 NOS.
4 UPHOLSTERED VISITORS' CHAIRS FOR OFFICERS (METHODEX MAKE) 7 NOS.
5 3-SEATER BLACK POWDER COATED TANDEM MULTI SEATER FOR 3 NOS.
CUSTOMER WAITING AREA
TOTAL
RENOVATION OF AMTALA BRANCH AT AMTALA , 24 PARGANAS(S)
FOR BANK OF BARODA
IV. SPECIFICATION OF LOOSE FURNITURE WORKS
SL. AMOUNT(RS. P)
I
II
III
IV
-
PARTICULARS
FURNISHING WORKS
ELECTRICAL WORKS
TOTAL
LOOSE FURNITURE
CIVIL WORKS
ABSTRACT
RENOVATION OF AMTALA BRANCH AT AMTALA , 24 PARGANAS(S)