band selection

2
Technical Support Procedures Band Selection for Supervised Classification When using a Supervised Classification all bands are used by default. However, it is possible to select specific bands to use during classification. Select the Classifier icon from the IMAGINE main menu. Select Signature Editor. Open your signature file in the Signature Editor using the Select File icon . In the Signature Editor, go to Edit | Layer Selection. (shown below) Leica Geosystems GIS & Mapping gis.leica-geosystems.com Technical Support [email protected] Page 1 of 1 TM Last Updated: 3/31/2004 BandSelection

Upload: farid-widodo

Post on 06-Dec-2015

213 views

Category:

Documents


0 download

DESCRIPTION

Pemetaan

TRANSCRIPT

Page 1: Band Selection

Technical Support Procedures Band Selection for Supervised Classification When using a Supervised Classification all bands are used by default. However, it is possible to select specific bands to use during classification.

Select the Classifier icon from the IMAGINE main menu.

Select Signature Editor.

Open your signature file in the Signature Editor using the Select File icon .

In the Signature Editor, go to Edit | Layer Selection. (shown below)

Leica Geosystems GIS & Mapping

gis.leica-geosystems.com Technical Support

[email protected]

Page 1 of 1

TM

Last Updated: 3/31/2004 BandSelection

Page 2: Band Selection

Select the appropriate layers in the Layers To Use dialog shown below.

Leica Geosystems GIS & Mapping gis.leica-geosystems.com

Technical Support [email protected]

Page 2 of 2

TM

Last Updated: 3/31/2004 BandSelection