band in a box tip sheet

Band-in-a-Box Tip sheet

PRESS THE LOCAL BUTTON IN ON THE HEADPHONE AMPLIFIER TO HEAR SOUND

To: Do: Start the

application

Mac On the desktop, click on the Applications folder, move the cursor over the Band-in-a-Box folder then click on the Band-in-a-Box icon in the pop-out

menu.

PC Click the Start button on the taskbar. In the Search field box type Band-in-a-Box. Under the Programs menu

heading click on the Band-in-a-Box icon.

The Band-in-a-Box window will be displayed.

Understand the

Main Screen

Below the menu headings and status bar is the main screen which consists of

the Synth, Keyboard, Tool and Title/Settings bars as well as the Chordsheet

area.

PC:

Mac:

Understand

Playback controls

Click the Play button on the toolbar. You should hear sound on the headphones and see animation on the screen keyboard display.

Play a few notes on the MIDI keyboard while playback continues. You should hear your notes being played back as well.

Click the Stop button to cease playback and return to the beginning.

Click the Replay button to replay the song without reconstructing it.

Click the Pause to temporarily cease playback.

Click the From button to begin playback starting anywhere. Type in the bar number or mouse-click directly on the chordsheet bar you want to start

playback from.

Synth

Keyboard

Toolbar

Title/Settings

Chordsheet

Synth Keyboard

Toolbar Title/Settings

Chordsheet

Understand the

MIDI parts

The "Band" parts (Bass, Piano, Strings, Guitar, Soloist and Drums) are pre-

defined on MIDI channels 2, 3, 6, 7, 8 and 10, respectively.

The "Live" parts (Melody and Thru) are user-supplied on MIDI channels 4

and 5, respectively. Melody is the instrument assigned for recorded playback

and Thru is the instrument assigned for live playback.

You may (and should) assign the Melody and Thru parts to the instrument(s)

you desire.

Assign the Melody

and Thru parts

Along the upper left portion of the tool bar are buttons for selecting the part

and a box for assigning the instrument.

To assign the Melody part: click on the Melody button, then click on the instrument box and select the instrument you desire from the drop-down

menu.

To assign the Thru part: click on the Thru button, then click on the instrument box and select the instrument you desire from the drop-down

menu.

Start a new song Click on the File menu heading and select New from the drop-down menu. Alternatively, press the New button on the toolbar. This will blank the

chordsheet.

Understand the song

settings (title, style,

key, tempo, chorus

start/end, repeat

number and loop)

Along the lower left portion of the toolbar is a box for changing various song

settings.

PC:

Title Key Tempo Chorus Repeat Style Start End Number

Mac:

Select the song settings

(title)

(style)

(key)

(tempo)

(chorus start/end)

(repeat number)

Drag over (PC) or click on (Mac) the default Untitled [Song] name and type in a new filename for the song.

Click on the Style button. The StylePicker window will be displayed. Select a Category from the left pane and choose the specific Style from the

center pane. Listed styles prefaced with a * or ^ indicate styles that are a

perfect or good match to the prototype style. You may press the Preview

and Stop buttons to audition any style.

In the lower center (PC) or lower right corner (Mac) of the StylePicker window is a box for selecting the melody patch.

Click on the Melody Patch box and select the instrument you desire to use from the pop-up menu.

When you are ready to select the style, click the OK button.

Click on the Key area and select a key from the drop-down menu. At the OK to transpose WorkSheet [Leadsheet]? prompt, click the appropriate Yes, No or Cancel button.

Click on the Tempo control area and type in the value you desire or use the

spin control arrows to increment/decrement the value by 1 or 5 beats. Selection quantity is controlled by vertical location (Mac) or mouse button

choice (PC) when clicking. In other words, Mac users will see +5, +1, -

1 or -5 as they move the cursor above then below the value; PC users will

see 5-beat value increments/decrements if they left-click or 1-beat value

increments/decrements if they right-click the mouse button on the

appropriate or spin control arrow.

Set the Chorus Start and End controls by clicking on each number then clicking on the bar number or enter the bar number in the dialog box.

Set the repeat number of choruses by clicking on the number then selecting the number of choruses in the dialog box.

(looping) PC Check or uncheck the Loop box for endless or single play.

Mac Click on the Song menu heading. If a checkmark is displayed before Overall loop in the drop-down menu you will have endless play; if not you

will have single play. Choose Overall loop to toggle the value.

Loop a section The instructions directly above loop the entire song. You can also loop a section of the song by doing the following:

Drag over the measure(s) you want to loop.

Click on the Loop button. A loop of the measure(s) you selected will playback indefinitely.

Click the Stop button to cease playback.

Input chords

using the

computer

keyboard

Click on the first cell in the chordsheet and type in a chord using standard alphanumeric chord symbols (like C, or Fm7 or Bb7, etc.). The chord name

will appear in the chord box. The Enter (PC) or return (Mac) key will

advance the chord cell bar. Alternatively, you may press the key. Use M for minor chords, e.g. Am

Use b for a flat, e.g. Bb7; Use # for a sharp, e.g. F#7.

Use / (slash) for chords with an alternate root such as C7/E (C7 with E bass)

Use , (comma) to enter 2 chords in a cell, e.g. Ab9,G7. (The G7 chord would be played on beats 3 and 4 of the measure).

For chord shortcuts:

Use J for Maj7, e.g. CJ (will be entered as CMaj7)

Use H for m7b5 (half-diminished 7th), e.g. DH (will be entered as Dm7b5)

Use D for dim7 (fully-diminished, e.g. diminished 7th and 5th)

Use S for Sus4 (suspended 4th and 7th), e.g. GS (will be entered as G7sus)

Continue until the song is complete. If you just want a sample progression type: CAmDm7G7C

Input chords

using the MIDI

keyboard

Alternatively, chords may be entered using the MIDI keyboard by pressing and holding the chords on the MIDI keyboard while pressing the

Ctrl+Enter keys (PC) or control+return keys (Mac) on the data keyboard.

Copy and paste

chords

Click and drag the cursor over the chords you desire to copy. The chords will be highlighted in reverse video.

Click on the Edit menu heading and select Copy from the drop-down menu. Alternatively, you may press + C (Mac) or Ctrl+C (PC).

Move the cursor to the numbered measure where you desire to start pasting the chords and click the mouse button.

Click on the Edit menu heading and select Paste form the drop-down menu. Alternatively, you may press +V (Mac) or Ctrl+V (PC).

Transpose a

portion of the

chords

PC

only

Click and drag the cursor over the chords you desire to transpose. The chords will be highlighted in reverse video.

Click on the Edit menu heading, select Transpose from the drop-down menu and Transpose From To from the pop-out menu. The Transpose dialog box will be displayed.

After the Transpose to Key option, click on the button, choose the new key from the drop-down list and click on the OK button.

Record a MIDI

melody

From the Tool Bar (above the chordsheet), press the Rec. button to begin recording. The Record Melody dialog box appears. In the Record From:

area, select the radio button of your choice.

When you are ready to start, press the Record button. An audible 2-measure count is played prior to recording. What you now play on the MIDI

keyboard Thru track will be recorded.

Once you have completed recording, the [X] Melody Notes recorded window appears asking if you would like to keep the take. Click the button

of your choice.

View Standard

Notation

On the Tool Bar (above the chordsheet) are buttons for viewing standard music notation:

PC: Mac:

Press the appropriate button. The standard music notation toolbar will be displayed.

Individual parts are displayed by pressing the appropriate buttons:

PC:

Mac:

Click on the [B] [D] [P] [G] [S] [M] [S] buttons to see the [B]ass, [D]rums, [P]iano, [G]uitar, [S]trings, [M]elody or [S]oloist parts, respectively.

View Leadsheet

Notation

PC

only

On the Tool Bar (above the chordsheet) is a button to view the leadsheet in multi-line music notation:

PC:

You may see multiple instruments together by clicking the instrument buttons while holding the Ctrl key.

Print Notation On the Tool Bar (above the chordsheet) are buttons for printing the notation:

PC & Mac: PC (leadsheet):

Press the appropriate button. The Print Options window will appear.

PC Choose your options and press the OK Print Preview button to see how your notation will appear.

Click on the Print button.

When you are ready to print, press the OK Print button.

Mac Choose your options and press the OK Print button. The print window will be displayed.

To view, press the PDF button and select the Open PDF in Preview option.

To print, press the Print button.

Erase a

recorded

Mac Click on the Melody menu heading and select Kill entire melody from the drop-down menu.

MIDI melody PC Click on the Melody menu heading, select Edit Melody track from the drop-down menu and Kill entire melody from the pop-out menu.

The OK to erase MIDI data? dialog box will be displayed. Click the Yes button to erase the track.

Change meter

and style for

the entire song

You can quickly change the meter and style for the entire song by clicking on

the Style button. The Select Style window will be displayed where you can

select the Category and a specific Style. For instance, if your meter and style

were in common time (4/4), by clicking on the Category pane, selecting

Waltzes, clicking on any specific Style and clicking the OK button you will

convert your entire song to 3/4.

Change meter

and style

within a song

To change the meter and style anywhere within the song do the following:

If you have previously recorded a MIDI melody erase it by following the instructions above titled "Erase a recorded MIDI melody."

Click on chordsheet bar where you desire to change the meter and style.

Click on the Edit menu heading.

Mac Select Bar settings from the drop-down menu.

PC Select Settings for current bar from the drop-down menu.

Change meter

and style back

to original

(optional)

The Edit Bar Settings dialog box will be displayed.

After the # beats this bar field, click on the box and type in 3, for example.

Click on the .STY button. The Select Style window will be displayed.

Under the left Category pane, select Waltzes.

Under the center Style pane, select a style. Listed styles prefaced with a * or ^ indicate styles that are a perfect or good match.

Click the OK button to exit the Select Style window.

Click the OK button to exit the Edit Bar Settings dialog box.

The chordsheet bar where you applied the meter and style change will have a red box around it. The meter and style change remain until you change it

again. All style changes will appear in the settings box during playback.

Try clicking on a later bar and changing the meter and style back to the original by following all the above steps. However, when you are in the

Edit Bar Settings dialog box, after the # beats this bar field click on the

box and type in 4. After you have clicked the .STY button and are in the

Select Style window, under the Category pane select Jazz [All] and under

the Style pane select J!LUSH (PC) or ZZJAZZ (Mac)

Save song as a

Band-in-a-Box

file

If you are using an external storage device, connect it to a USB port on the

sides of the computer keyboard (Mac) or left-side of the monitor (PC).

Click the Save button to save the file in a Band-in-a-Box format (.SGx file if no melody is present or .MGx file if melody is present). The Save dialog

box will be displayed.

PC In the Save in: dialog box, choose your external storage device or the Data (D:) drive from the drop down list. If you desire to create a new folder,

right-click on a blank area of the window, select New and Folder from the

drop-down and pop-out menus and type a folder name of your choice.

After the File name: dialog box, type in your file name.

Leave the Save as type: dialog box as is.

Mac In the Save as: dialog box type in a file name of your choice (leave the .SGx or .MGx extension as is).

From the Where: drop-down list, choose your external storage device or temporarily choose the Desktop.

Finally click the Save button.

Export song

as a .MID file



Click the .MID button to save the file as a standard MIDI file. The Choose Destination for Standard Midi File dialog box will be displayed.

PC Leave the MIDI File Type option as is (Type 1 (multi-track) 'Normal') or click on the button and choose a different option.

Click the File on Disk button. The Save dialog box will be displayed.

In the Save in: dialog box, choose your external storage device or the Data (D:) drive from the drop down list. If you desire to create a new folder,




Leave the Save as type: dialog box as is (.MID).

Mac Click the File on Disk button. The Save dialog box will be displayed. In the Save as: dialog box type in a file name of your choice (leave the

.MID extension as is).

From the Where: drop-down list, choose your external storage device or temporarily choose the Desktop.

Finally, click the Save button.

Additional Click on the Help menu heading to display the list of available resources.

information PC A drop-down menu includes Index, Topic Search, How to, Tutorials, Tip of the Day, Display Program Manual and several other sources. If

you select Display Program Manual the manual will open in the Adobe

Reader application.

Mac A drop-down menu will list View Band-in-a-Box Manual. Select it. The manual will open in the Adobe Reader application.

Click on the Bookmarks icon to navigate to specific points of interest. Alternatively, you may click on Edit menu heading and select Find from

the drop-down menu. This will open the Find box where you can type in a

search term and click the Forward Search or Backward Search icons to

locate every instance of the search term.

Render song

to audio as a

.WAV file

.WMA file

.MP3 file or

other format

PC


left-side of the monitor (PC).

Click the .WAV button to render the file as an audio file. The Render to Audio File dialog box appears indicating that your file will be saved by

default as C:\bb\NONAME_Render.WAV.

Click the Choose button to name your audio file. The File Save dialog box will be displayed.

In the Save in: dialog box, choose your external storage device or the Data (D:) drive from the drop down list. If you desire to create a new folder,




Finally click the Save button.

Click on the DXi Direct Render (save WAV File) button to render the file as an uncompressed audio WAV file. In a moment a Message dialog

box will appear indicating where the file is stored.

Click on the Save in Windows Media format (WMA) button to render the file as a compressed audio file. The Question dialog box appears indicating

that your file will be rendered and converted in the same location as the

original with a file path ending in \yourfilename_Render.WMA and then asks if it should proceed.

Click the Yes button. In a moment a Message dialog box will appear indicating where the file is stored.

Click the Save in other Audio format and MP3 to render the file as a compressed audio file in the format of your choice. The Question dialog

box appears indicating that your file will be rendered and converted in the

same location as the original with a file path ending in

\yourfilename_Render_Compressed.WAV and then asks if it should proceed.

Click the Yes button. In a moment a Message dialog box will appear indicating where the file is stored.

Click the OK button to exit the Message dialog box. The Select an output audio format dialog box will be displayed.

After the Format: field, click on the box and make your choice from the options available.

After the Attributes: field, click on the box and choose the quality you desire from the options available.

Click the OK button to confirm your choices.

Click the Yes button to convert to the format you chose. Conversion progress will be indicated and your file will be stored in the same location

as the original with a file path ending in

\yourfilename_Render_Compressed.XXX (XXX is the tag for the format option you chose).

Click the Close button to exit the Render to Audio File dialog box.

Render song

to audio

Mac If you are using an external storage device, connect it to a USB port on the sides of the computer keyboard (Mac).

Click on the Audio icon to render the file as an audio file. The Render to Audio File dialog box appears indicating that your file will be rendered and

saved in the /Applications/Band-in-a-Box/Song Renders folder.

If desired, under the Destination name: field drag over the default No File Name and type in a file name.

If desired, under the Destination Folder: field drag over the default /Applications/Band-in-a-Box/Song Renders folder and click on the

far-right button. The Choose a folder dialog box will appear. Navigate to the Desktop (temporarily) or your external storage device.

If you select your external storage device, click on the New Folder

button, type in a filename and click the Create button.

When ready, click on the Choose button. You will exit the Choose a folder dialog box.

Under the Output Format: field click on the AIFF, M4a or Wav radio button.

Finally, click the Render button. In a moment a Message box will appear indicating the progress followed by another box inquiring if you like to see

the file in the Finder. Click the Yes or No button.

Click the Close button to exit the Render to Audio File dialog box.

Your rendered file will appear in the format, location and folder you chose in a sub-folder titled Yourfilename_RenderFolder.

Convert audio

using iTunes



Right-click on the audio file and choose Open With from the drop-down menu and iTunes from the pop-out menu.

The iTunes application window will appear and begin playing the file.

If you so desire, click on the file and re-name it.

Mac Click on the iTunes menu heading and choose Preferences from the drop-down menu. The Preferences dialog box will be displayed.

PC Click on the Edit menu heading and choose Preferences from the drop-down menu. The Preferences dialog box will be displayed.

.AAC or .AIF or

.M4a or MP3 or

.WAV file

If not already selected, click on the General tab. Click on the Import Settings button. The Import Settings dialog box will be displayed.

After the Import using: field click on the box and choose the Encoder option you desire (AAC, AIFF, Apple Lossless, MP3 or WAV)

Click the OK button to confirm you choice and exit the Import Settings dialog box.

Click the OK button to exit the Preferences dialog box.

Right-click on your file and select Create XXX version from the drop-down menu (XXX is the import setting you chose above).

Your file will be converted and soon appear in the iTunes window.

Click on your file and drag it to your external storage device, the Data (D:) drive (PC) or temporarily the Desktop (Mac & PC).

To:Start the applicationUnderstand the Main screenUnderstand Playback controlsUnderstand the MIDI partsAssign the Melody and Thru partsStart a new songUnderstand the song settings (title, style, key, tempo, chorus start/end, repeat number and loop)Select the song settings (title, style, key, tempo, chorus start/end, repeat number and looping)Loop a sectionInput chords using the computer keyboardInput chords using the MIDI keyboardCopy and paste chordsTranspose a portion of the chords (PC only)Record a MIDI melodyView Standard notationView Leadsheet notation (PC only)Print notationErase a recorded MIDI melodyChange meter and style for the entire songChange meter and style within a songChange meter and style back to original (optional)Save song as a Band-in-a-Box fileExport song as a .MID fileAdditional informationRender song as a .WAV file (PC)Render song as a .WMA file (PC)Render song as a .MP3 or other format (PC)Render song to audio (AIFF, M4a or Wav) (Mac)Convert audio using iTunes (.AAC, .AIF, M4a, .MP3 or >WAV file)

band in a box tip sheet

Documents