Before commencing assembly, please read these instructions thoroughly!

PRINTED IN JAPAN 64271010-2

*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.

htpp://www.kyosho.com

© 2010 KYOSHO / KFW006

for KF01INSTRUCTION SHEET

No.KFW006

Thank you for purchasing this product. Before installation, please carefully read and follow the instructions on this sheetin conjunction with the instruction manual of your kit.

Firmly tighten the set screws onto the �at spot.

Ball Diff . Set

Symbols used throughout the instruction manual, comprise:

Apply grease. Apply threadlocker (screw cement).Must be purchased separately!

Assemble in the specified order.

1/8

8

Diff Ball

1/8Diff Ball

Note the direction

Diff Washer

1

4.8x10mm

5mm

Thrust Bearing

4.8x10mmThrust Bearing

1

Taper Washer

Taper Washer

2

6x10mmBearing

6x10mmBearing

6x10mmBearing

1

5x10mmBearing

5x10mmBearing

1

4x 4mm

4x 4mm

Set Screw

Too loose Diff slips.(Power loss) Tighten

Ideal Diff dosen't slip.(Smooth)

Too tight Diff dosen't work. Loosen

To find the appropriate ball diff setting, make small adjustments and check by running the car. Please also refer to the below chart.

Ball diff can be adjusted by tightening or loosening the wheel nut.

SPARE PARTS

Set Screw(M4x4/10pcs)

Shield Bearing(5x10x4)4Pcs

Shield Bearing(6x10x3)2Pcs

Ball Diff. Shaft

Thrust Bearing(4.8x10x4)1Pcs

Diff. Ball(1/8 Inch/10Pcs/SPADA09)

Thrust Diff. Ring(2Pcs/TF-5)