Baldwin Wallace College (Berea, Ohio)Baldwin Wallace College (Berea, Ohio)

Two KN20 boilers installed to replace old atmospheric

cast iron boilers.

KN boilers are true cast iron sectional boilers

packaged to fire at fully condensing efficiency (up

to 99%). They have no minimum return

temperature requirements.

The KN boilers exceeded the colleges expectations

in durability (cast iron) and efficiency with the

ability to reset the building down into the 90F range where they fire well into

the 90% efficiency range.

Lake Catholic High School Lake Catholic High School (Mentor Ohio)(Mentor Ohio)

Three KN20 boilers installed to replace two old Bryan atmospheric

flex tube boilers.

KN boilers are effectively heating the school with a fraction of the capacity

compared to the old boilers.

The KN boilers provided a way to reset the building down to 85F without the

use of a 3 way valve needed in the old system.

Boiler were piped with sealed combustion

eliminating the need for a large make up air louver.

Project freed up much of the boiler room.

Eliminated nearly all of the stand by losses from the

old boilers.

Large combustion air louvers were converted to

a usable garage door / loading area.

Bypass loops or primary secondary piping was not

needed, cleaning up piping too!

This was a very impressive installation.

TODAYTODAYTODAYTODAY

OLD BOILERSOLD BOILERSOLD BOILERSOLD BOILERS

Kirtland Country Club Kirtland Country Club (Kirtland, Ohio)(Kirtland, Ohio)

Two KN10 boilers were installed to replace this old Peerless Cast Iron sectional steam boiler.

The building was converted to hot water

and the KN boilers provide capacity for the building

heat, the pool heater, and the domestic hot water

system.

In addition, RME supplied the domestic hot water system, System pump

VFD drives, an Exhausto vent system, and a new

pool heater for the project.

Two KN10 boilers were installed to replace this old Peerless Cast Iron sectional steam boiler.

The building was converted to hot water

and the KN boilers provide capacity for the building

heat, the pool heater, and the domestic hot water

system.

In addition, RME supplied the domestic hot water system, System pump

VFD drives, an Exhausto vent system, and a new

pool heater for the project.