baker, carrie initial design 11.3.15
TRANSCRIPT
Carrie & Nick BakerKitchen Renovation11.03.15
John [email protected] Line: 952-241-8690
U309024
DB24-1
B3
0-R
OT
-2B
30
-RO
T-2
BW
B1
8S
B3
6-T
OD
B1
5-2
UF
33
0
BE
R3
3-S
SL
DB
24
B2
4B
24
DB
24
B2
4-F
H
FP
96
48
B2
4-F
HB
24
-FH
B2
4-F
H
BTB9-FHL
UF
1.5
42
DB18
DB
30
UF
1.5
42
RR
96
LR
R9
6R
DB
24
-1D
B2
4-1
UF
64
2
UF330
W1
23
6L
W1
23
6R
UF
34
2
W3
03
6W
30
36
W3
03
6U
F3
36
WE
R2
43
6L
UF
33
6
W1536L W1536R
WM
SC
30
18
W3
01
8U
F3
36
WR
36
18
24
40"
40
"
37"
215
3 4"
184"
184
12"
48"
51"
60"
74
12"
36"
74"
52"96" 36"
71
1 2"
103
1 2"
40
3 4"
W3036
UF336
WER2436L
W1
23
6L
W1
23
6R
W3036 W3036
BER33-SSL
UF330
DB15-2
SB36-TOBWB18B30-ROT-2B30-ROT-2
54
"6
"3
6" All decorative
doors to be applied on site.
24
" D
ish
wa
sh
ers
Pull Out Trash
2 Rol
l-Out
Tra
ys
2 Roll-O
ut T
rays
2 Wood Lazy Susans
Tilt Out Tray
215 3
4 "
96"
71 1
2 "103 1
2 " 40 3
4 "
W1
53
6L
W1
53
6R
WMSC3018
W3018
UF336WER2436L
BT
B9
-FH
L
UF1.542DB18 DB30BER33-SSL
30" Range
2 Wood Lazy Susans
6"
11 16"
12
1 8"
30" Hood
36"96"
184"9
6"
54
"52"
16
15
16"
57 8"
U309024
WMSC3018
UF336
W3018
UF642DB24-1DB24-1
DB30
UF1.542
UF342
WR361824
RR96R
RR96L
184 1
2 "
Fridge opening 36" x 72"With out the Filler
BTK8 Build-Up Toe Kick
96
"
18
"1
8"
54
"6
"36"74" 74 1
2 "
Option 1 is the Nook
DB24-1UF642UF330
96
"
48"
Build-Up Toe Kick
Apply OGP8 along bottom as baseboard
Option 1
UF
64
2
W1
83
6-M
FD
R
W3018
WSC3018
W1
83
6-M
FD
L
B18-FHL
DB
15
-2
DB
15
-2
DW
R3
R
74"
96
"
18
"
Apply OGP8 along bottom as baseboard
18
"5
4"
6"
Option 2
DB24 B24 B24 DB24
113 516"
BTK8
All decorative doors to be applied on site.
FP9648B24-FHB24-FH B24-FH B24-FH
113 516"
All decorative doors to be applied on site.
Apply OGP8 along bottom as baseboard
Option 2
Most refrigerators are at least 29-30” in depth and stick out past wall and base cabinets. Below is an example of how a Wall Refrigerator cabinet can be pulled forward (before a deep refrigerator panel has been applied) more than 24” away from the wall. Note: Wall Refrigerator cabinet must have at least 3 points (wall, ceiling, adjacent cabinet or support from floor) of secure contact to be installed correctly and safely.
Pull Refrigerator Cabinet From WallField Install | Finish Panel
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
Deep Refrigerator EnclosureRefrigerators normally extend out from the countertop at least 4"- 6". This diagram depicts how to enclose the side(s) of a refrigerator with RR96 & FP4896 panels and provide a “built in” look. Dimensions will vary based on the WR cabinet size. Installer will provide wood blocking and the means to properly secure panels and WR cabinet to wall and floor. In example below the WR cabinet (24" deep) is being pulled out from wall 6".
Wall
WR Cabinet
RR96L RR96R
AppliedFP4896
(trimmed to fitall the way to wall)
AppliedFP4896
(trimmed to fitall the way to wall)
= Blocking to attach panels & extend WR cabinet from wall (not provided)
Refrigerator
View: Top, looking down
Refrigerator Return30" Deep Panel | RR96
page 1 of 2
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
Requires panelto be anchored to the
inside floor - “L” bracketif no adjacent base cabinet
Requires panelto be anchored to theinside floor - “L” bracketif no adjacent base cabinet
WR Cabinet
WR Cabinet
WR Cabinet
WR Cabinet
adjacentwall cabinet
adjacentbase cabinet
adjacentbase cabinet
adjacentwall cabinet
adjacentbase cabinet
adjacentwall cabinet
refrigerator
refrigeratoradjacentwall cabinet
No wood blocking shown
on this side show
=FP4896 trimmed to fit
=RR96L & RR96R
=UF filler
= Wood Blocking
View: Top, looking down at back
View: Top, looking down at back
NO WOOD BLOCKING DISPLAYEDSO PANELS CAN BE VIEWED
Refrigerator Return30" Deep Panel | RR96
page 2 of 2
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
Example drawings depict standard depth wall cabinet with the door and shelves removed.
Installation supports are not provided by CliqStudios.com manufacturer’s install requirements vary.
WARNING! Cabinet drawing left and below show example wall cabinet with ¼" reveal and without applied end panels.
¾"bottom
(½" plywood)
¾"
��
½"
¾"
side
Cabinet Underhang = ¾" high
Back Panel thick���������
Side Panel thickness = ½"
Under Wall Cabinet DimensionFor Under Cabinet Lighting
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
cabi
net f
ace
fram
e
cabi
net d
oor
Cabinet Side
wood blocking(not provided)
3½"
ceiling
TCM8
crown moldingmoves up/down
along ceiling
CTM8U
F396¾"
3"
Crown MoldingTCM8 | CTM8 | UF396
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
CTM8
1½"
Cab
inet
Fac
e Fr
ame
Cab
inet
Doo
r
¾"
Light RailCTM8 | Horizontal
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
Cabinet Side
OCM8 -Outside Corner MoldingAcutal Size
1"
1"
OCM8 molding is typically used on the back side of cabinets/islandsto conceal seams from cut panels on corners.
Front Right View
Back Left View
Decorative MoldingOCM8 | Corner Application
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
Cab
inet
Fac
e Fr
ame
Cab
inet
Doo
r
BaseCabinet
Side
OG
P8
wood blocking(not provided)
Floor
VoidToe Kick
Area
¼"
4¾"
Floor
3½"
4½"
Decorative ToekickOGP8
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
CliqStudios.com, LLC reserves the right to change, modify or discontinue programs at any time v 1-2015
Because walls are usually not straight, level, square, flush or plumb we recommend the following accessories to accommodate constrution space imperfections for the floor, wall or ceiling and may have included them in your order to finish your space.
Attention:
recommended accessoriesfor your designDreams designed. Dreams delivered.
96" 4½"
UF1.542 1½" 42"UF1.596 1½" 96"UF342 3" 42"UF336 3" 36"UF330 3" 30"UF396 3" 96"UF642 6" 42"UF696 6" 96"
A BA
B
¾"
96"
¾"
¾"IQR8� Solid hardwood� Bold line represents finished edge
¾"
96"
¼"
SM8� Solid hardwood� Bold line represents finished edge
� Solid hardwood� Front & sides finished
backwall
floor
sidewall
backwall
floor
gap createdby filler betweencabinet & wall
Inside Quarter Round is more than a decorative accent. It is installed after the flooring and is primarily used to cover the gapping resulting from shims to level cabinets. Quarter Round can also help cover up gaps in the floor - especially with tile.
sidewall
backwall
floor
cabinetside
floor
backwallside
wall
cabinetside
FILLERSFillers are used to “fill” the gap between a wall and the end run of cabinets, and sometimes between cabinets. Fillers can also be used horizontally for decorative molding applications. Field install and trim to width/height.Note: Fillers also are used to provide space between cabinet and wall for proper door swing operation to provide cabinet access, especially with decorative hardware and roll out trays
BTK8� Plywood veneer w/ engineered core � Bold line represents finished edgeBase ‘Toe Kick’ is used as a panel to cover up the gapping created by the placement of cabinets. It is applied to the recessed area where the cabinet meets the floor.
SM8, or Scribe molding,is used along the wall when cabinets/fillers meet a non-plumbwall to hide gapping between thecabinet and the wall.
cabinetside
Wood is a product of nature with different grain patterns, color variations, aging patterns, and mineral streaks which add to the beauty and distinction of natural hardwood products. These wood variations are not considered a defect and will not be subject to warranty replacement. Painted Cabinets may require additional maintenance. Over time, painted finishes will develop hairline cracks from the results of natural expansion and contraction of the wood. Visit our website for more information on finish characteristics
Do not begin demolition of space or existing cabinetry prior to receipt and inspection of your new cabinets, as missing or damaged parts may delay your installation. Any install delays, trip charges, contractor fees, etc. due to pre-scheduling your installer are your responsibility. CliqStudios.com is not liable for these costs, and has recommended against installation prior to inspection and receipt of all original and replacement orders.
measurements
installation
wood & finish characteristics
You have provided, and are responsible for, all measurements. Please verify all dimensions prior to the purchase of your cabinets:
Any changes made after the order has been placed will be subject to a 25% restocking fee and additional shipping charges. Visit our website for more information on our Return Policy
At CliqStudios.com, we understand that remodeling projects can be stressful, time consuming, and may disrupt areas of your home that your rely on. In our experience, making sure that you are aware of what to expect is the most effective way to navigate the process as smoothly as possible.
Thank you for choosing CliqStudios.com for your cabinetry project!
• Appliances • Window/Door dimensions and location• Ceiling and/or soffit heights • Special considerations & obstructions• All drawings, renderings and design information provided by designer
Please read the following carefully prior to the purchase of your order:
what to expectorder confirmation
page 1 of 2Dreams designed. Dreams delivered.
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.
terms & conditions
_________________________________ ____________Customer Signature Date
_________________________________Customer Printed Name
In placing your order with Cliqstudios.com, you agree that you have read and understand this documentation, and that you agree to the terms and conditions of Cliqstudios.com.
I have read and I understand the above Cliqstudios.com Final Steps and have verified and approved all of the conditions, including any drawings, renderings or pictures of design plan, that were included with the final design packet with designer.
order receipt & inspectionOnce order has been received promptly inspect for any damaged or missing items. If you have any damaged items you will need to contact Customer Service as soon as possible. Replacement orders usually ship in less than one week.
• phone: 800.576.7930 ext. 561
• email: [email protected]
Standard Home Delivery order will be shipped to a location accessible by a pallet jack to the first secure, dry area (usually a garage), on the same level as the truck tires. If Standard Home Delivery cannot be accommodated please contact your designer before purchase to arrange for Limited or Restricted delivery; additional charges will apply. Cliqstudios.com will notify you once the order has left our facility via email. You will be contacted to schedule an eight (8) hour delivery window directly by the delivery carrier. Shipments may be delayed due to weather, mechanical issues, holidays, or other situations relating to delivery coordination.
standard delivery
If you haven’t already please take the time to view our video which outlines what to expect and easy things that you can do to make the delivery and receipt of your cabinet order go as smoothly as possible. Visit our website to view deilvery video
To send signature back to designer you may: 1. Scan & email to your designer 2. Fax to 877-675-4394 attention your designer 3. Or reply back via email confirming your agreement to the Terms & Conditions
what to expectorder confirmation
page 2 of 2Dreams designed. Dreams delivered.
ph: 800.576.7930 | fax: 877.675.4394 | [email protected]®, LLC reserves the right to change, modify or discontinue policy and products at any time.
All dimensions are nominal. This drawing is only provided as a reference and CliqStudios.com is not responsible for final installation.