bachelor of engineering (honours) (benh) - beng(hons) · the bachelor of engineering (honours) is a...
TRANSCRIPT
Bachelor of Engineering (Honours) (BENH) - BEng(Hons)QTAC code (Australian and New Zealand applicants): Springfield campus: 927332; External: 907335;Toowoomba campus: 907332
CRICOS code (International applicants): 079519E
External#On-campus^
Semester 1 (February)Semester 2 (July)
Semester 1 (February)Semester 2 (July)
Semester intake:
-Springfield, ToowoombaCampus:
Commonwealth supported placeCommonwealth supported placeFees:Domestic full fee paying placeDomestic full fee paying placeInternational full fee paying placeInternational full fee paying place
4 years full-time, 8 years part-timeStandard duration:
From: Associate Degree of Engineering; Bachelor of Engineering ScienceProgramarticulation:
FootnotesThe Civil Engineering major is the only major available in its entirety on-campus at USQ Springfield at this stage. The first three years of theElectrical and Electronic Engineering, Mechanical Engineering and Mechatronic Engineering majors are available at USQ Springfield in 2019(with the final year becoming available in 2020).
^
The Instrumentation Control and Automation Engineering major is only available via external study.#
Contact us
Current studentsFuture International studentsFuture Australian and NewZealand students
Ask a questionFreecall (within Australia): 1800007 252Phone (from outside Australia): +617 4631 2285Email [email protected]
Ask a questionPhone: +61 7 4631 5543Email: [email protected]
Ask a questionFreecall (within Australia): 1800269 500Phone (from outside Australia): +617 4631 5315Email: [email protected]
Professional accreditationA graduate of this program is eligible to apply for membership of Engineers Australia as a graduate ProfessionalEngineer. After further professional development, a graduate member with a Bachelor of Engineering (Honours)may apply for chartered status as a Professional Engineer and, when granted, may use the post-nominalMIEAust CPEng.
The Bachelor of Engineering (Honours) program is accredited by Engineers Australia and, through an agreementreached between the professional engineering bodies of other countries (the Washington Accord), is alsorecognised in those countries that are signatories to the Washington Accord.
Program aimsThe Bachelor of Engineering (Honours) provides students with the knowledge and skills that are necessaryto commence practice as a professional engineer; be eligible for graduate membership of Engineers Australia(as a Professional Engineer) and other appropriate professional bodies; and to undertake further advancedlevel studies in engineering. Specifically the program provides students with a core of basic generic andtechnical skills, common to all branches of engineering, ,and then permits students to undertake an in depthstudy of either agricultural, civil, computer systems, electrical and electronic, environmental, instrumentation
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120811© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
control and automation, mechanical, mechatronic or power engineering. In addition, students are equippedwith a knowledge of the industrial and social environments in which they will function as professional engineers.The program also seeks to instil in students a capacity to communicate effectively and adapt to change.
The Bachelor of Engineering (Honours) is primarily vocationally oriented. However, the program has beendesigned to identify students who have the capacity to undertake further study at an advanced level and tomake an original contribution to engineering knowledge.
Program objectivesOn completion of this program, students should be able to:
(1) Display coherent and comprehensive knowledge of historical, contemporary and emerging theories andconcepts that underpin relevant engineering disciplines.
(2) Recognise the social purpose of engineering and analyse the relationship between human-made productsand systems, and community needs.
(3) Apply well-researched, innovative, industry-relevant systems approaches to solve a range of engineeringproblems, and to address issues of sustainable practice in diverse environmental, technical and socialcontexts.
(4) Apply relevant project management skills and formulate design processes to enable the delivery ofengineering projects within given project constraints.
(5) Make appropriate autonomous judgements by critically evaluating evidence, identifying and analysingethical issues and applying cultural competencies, including those relevant to indigenous peoples.
(6) Communicate effectively in English and interpret information for diverse audiences using a range ofhigh-level oral, written and technology-based approaches; and apply effective competencies as a leader,team member and individual within the professional domain.
(7) Engage in lifelong learning through critical reflection, and be accountable for their personal and professionalactions by managing and monitoring personal performance.
Australian Qualifications FrameworkThe Australian Qualifications Framework (AQF) is a single national, comprehensive system of qualificationsoffered by higher education institutions (including universities), vocational education and training institutionsand secondary schools. Each AQF qualification has a set of descriptors which define the type and complexityof knowledge, skills and application of knowledge and skills that a graduate who has been awarded thatqualification has attained, and the typical volume of learning associated with that qualification type.
This program is at AQF Qualification Level 08. Graduates at this level will have advanced knowledge andskills for professional or highly skilled work and/or further learning.
The full set of levels criteria and qualification type descriptors can be found by visiting www.aqf.edu.au.
Program Information SetView USQ’s admission criteria, student profiles and a summary of all offers made under Course AdmissionInformation Set via the QTAC website.
Admission requirementsTo be eligible for admission, applicants must satisfy the following requirements:
● Have achieved a minimum Overall Position (OP) 11, tertiary entrance rank 77 or equivalent qualification.^
● Subject Pre-requisites: English (4,SA) and Mathematics B (4,SA) or equivalent.● English Language Proficiency requirements for Category 2.
Applicants are advised to also note the following:
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120812© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
● Recommended Prior Study: Physics (4,SA) or equivalent.
All students are required to satisfy the applicable English language requirements.
If students do not meet the English language requirements they may apply to study a University-approvedEnglish language program. On successful completion of the English language program, students may beadmitted to an award program.
These are determined by the University for specific programs each Semester. The 2019 OP and tertiaryentrance ranks are based on agreed QTAC schedules which assess formal study at Year 12 or equivalent
^
level, tertiary, preparatory, professional or vocational qualifications or work experience, as detailed inthe QTAC Assessment of Qualifications Manual and QTAC Assessor Guidelines.
Special admissions may help you get into the program of your choice by increasing your Selection Rank.The additional points don't apply to all applicants or all programs. Please read the information aboutUSQ's Special Admissions carefully to find out what you may be eligible for.
Program fees
Commonwealth supported placeA Commonwealth supported place is where the Australian Government makes a contribution towards the costof a students' higher education and students pay a student contribution amount, which varies depending onthe courses undertaken. Students are able to calculate the fees for a particular course via the Course FeeFinder.
Commonwealth Supported students may be eligible to defer their fees through a Government loan calledHECS-HELP.
Domestic full fee paying placeDomestic full fee paying places are funded entirely through the full fees paid by the student. Full fees varydepending on the courses that are taken. Students are able to calculate the fees for a particular course via theCourse Fee Finder.
Domestic full fee paying students may be eligible to defer their fees through a Government loan called FEE-HELP provided they meet the residency and citizenship requirements.
Australian citizens, Permanent Humanitarian Visa holders, Permanent Resident visa holders and New Zealandcitizens who will be resident outside Australia for the duration of their program pay full tuition fees and arenot eligible for FEE-Help.
International full fee paying placeInternational students pay full fees. Full fees vary depending on the courses that are taken and whether theyare studied on-campus, via distance education/online. Students are able to calculate the fees for a particularcourse via the Course Fee Finder.
Program structureThe Bachelor of Engineering (Honours) is a 32-unit program consisting of Academic Courses and PracticeCourses. Students undertake a major of study, including approved courses which students are able to select.Students may choose to substitute four approved courses for a minor of four units in another area of study totheir major (except for Mechanical Engineering and Mechatronic Engineering). The available minors andassociated courses are listed in the minor studies section.
Academic courses are normally one-unit courses and involve approximately 155 hours of student work perunit.
Practice courses are zero unit courses and each involves approximately 50 hours of student work.
The following table shows the mandatory components of the program:
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120813© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Practice CoursesAcademic CoursesProgramComponent UnitsNumber of CoursesUnitsNumber of Courses
041111Core Studies
04-5 depending uponthe major
2121 OR 17+4Major Study(including approvedcourses) OR MajorStudy plus MinorStudy
08–93232Total
Minor Studies
A minor study is a coherent group of four units of courses that provides students with an additional breadthof study in their program. Students who wish to take a minor study before undertaking any course shouldensure any pre-requisite courses are completed or exempted, enrolment requirements must be satisfied forany course selected.
Minor Study availableMajor study
YesAgricultural Engineering
YesCivil Engineering
YesComputer Systems Engineering
YesElectrical and Electronic Engineering
YesEnvironmental Engineering
YesInstrumentation Control and Automation Engineering
NoMechanical Engineering
NoMechatronic Engineering
YesPower Engineering
When students select a minor, courses will only count towards that minor if they have not already countedtowards another selected major. Not all minors are available on-campus at all campuses. Students undertakinga Minor study may choose courses from those listed in this section of the Handbook as follows:
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major: AllexceptMechanical orMechatronic
Minor Study – Management. Select the following course:
S2, S3S2S2,S3ENG4004EngineeringProject andOperationsManagement
select 3 other courses from the following list:
S1S1S1MGT2001 RiskMitigation, WorkHealth and Safety
S1MGT2007Leadership
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120814© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
S2MGT3004Creativity,Innovation andEntrepreneurship
S1S1S1MGT3005WorkforceDesign
S2, S3S2S2MGT3203 ProjectManagementProcesses
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major:AgriculturalEngineering
Minor study: Mechanical Engineering (select 4 courses from the following list):
S1S1S1MEC2202ManufacturingProcesses
S2S2S2MEC2406Introduction toMechatronics andAutomation
S1S1MEC3203MaterialsTechnology
S2S2MEC3303Mechanical andMechatronicSystem Design
S2S2MEC4406Robotics andMachine Vision
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major: CivilEngineering
Minor study: Mining Engineering (select 4 courses from the following list):
S1S1MIN2001 MiningTechnology andMineralProcessing
S2S2MIN2002 MinePlanning andDesign
S2S2MIN2003 MineOperations andManagement
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120815© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
S1S2
MINADapproved coursetaken throughCentralQueenslandUniversity (CQU)viacross-institutionalenrolment.ENAR12004MineManagement andSafetyORENAR11001ResourceGeology
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major: CivilEngineering
Minor study: Transport Engineering (select the following 3 courses):
S2CIV5704 Roadand StreetEngineering
S1S1CIV5705Pavement Designand Analysis
S2S2URP4001MovementNetwork Planning
Select 1 of the following courses:
S2CIV3603ConstructionMethods
S1S1S1ENV2201 LandStudies
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Majors:Agricultural orEnvironmentalEngineering
Minor study: Climatology (select the following 4 courses):
S1S1CLI1110 Weatherand Climate
S2S2CLI2201 ClimateChange andVariability
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120816© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
S1S1CLI3301 Climateand EnvironmentRisk Assessment
S2S2CLI3302Adaptation toClimate Change
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Majors:Environmentalor PowerEngineering
Minor study: Geographic Information Systems (select 4 courses from the following list):
S1, S3S11S1GIS1402GeographicInformationSystems
S2S2GIS3405 SpatialAnalysis andModelling
S2S2GIS3406 RemoteSensing andImage Processing
S1, S2, S3S1, S2S1, S2CSC1401FoundationProgramming
S1S1GIS3407 GISProgramming andVisualisation
Enrolmentrequirements
Online (ONL)External (EXT)Springfield(ONC)
Toowoomba(ONC)
Major: AllexceptMechanical orMechatronic
Minor Study – Data Management (Select 4 courses from the following list):#
S1, S3S1S1CIS2002Database DesignandImplementation
S2S2CIS3010 OracleDevelopment
S1, S2, S3S1, S2S1, S2CSC1401FoundationProgramming
S1S1S1CSC3400Database Systems
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120817© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
S2S2CSC3501Principles of DataScience and
Visualisation*
S2S2CSC3502Principles of BigData
Management*
FootnotesIt is recommended that students who complete all three of CIS2002 Database Design and Implementation, CIS3010 Oracle Development andCSC3400 Database Systems, choose CSC3502 Principles of Big Data Management or CSC3501 Principles of Data Science and Visualisation.
#
Students are able to use ENG3104 Engineering Simulations and Computations to satisfy the Requisite Knowledge requirements of this course.*
Required time limitsStudents have a maximum of 10 years to complete this program.
Core coursesThe courses that comprise the core studies program are shown in the following table:
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,21,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENG1004 Engineering Problem Solving Principles
1,21,21,2ENG1100 Introduction to Engineering Design
1,2,31.21,2ENG2002 Technology, Sustainability and Society
111ENG3003 Engineering Management
222ENG3104 Engineering Simulations and Computations
222ENG4110 Engineering Research Methodology
111ENG4111 Research Project Part 1
1,221,2ENG4112 Research Project Part 2
1,21,21,2ENM1600 Engineering Mathematics
111ENM2600 Advanced Engineering Mathematics
Practice Courses
2,311,2ENG1901 Engineering Practice 1
2ENG3902 Professional Practice 1
21ENG4903 Professional Practice 2
1,2,3ENG4909 Work Experience - Professional
Major studiesThe Bachelor of Engineering (Honours) consists of a core component and a series of major studies. All studentsmust complete the core courses and one of the major studies. The major study provides students with knowledgeand skills in a specific discipline. The major study areas in the USQ Bachelor of Engineering (Honours) arelisted below. The Instrumentation Control and Automation Engineering major is designed for process
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120818© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
technologists in industry who wish to upgrade their qualifications. As such, the program will normally beundertaken by external study.
ExternalOn-CampusMajor
YesYesAgricultural Engineering
YesYesCivil Engineering
YesYesComputer Systems Engineering
YesYesElectrical and ElectronicEngineering
YesYesEnvironmental Engineering
YesNoInstrumentation Control andAutomation Engineering
YesYesMechanical Engineering
YesYesMechatronic Engineering
YesYesPower Engineering
Agricultural Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
22AGR2301 Agricultural Science
11AGR2302 Agricultural Machinery
11AGR3303 Agricultural Materials and Post-HarvestTechnologies
11AGR3304 Soil Science
22AGR3305 Precision and Smart Technologies inAgriculture
11AGR4305 Agricultural Soil Mechanics
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
11ENV2103 Hydraulics I
111ENV3104 Hydraulics II
22ENV3105 Hydrology
22ENV4106 Irrigation Science
1,2,31,21,2MEC1201 Engineering Materials
222MEC2301 Design of Machine Elements
111MEC2401 Dynamics I
111MEC2402 Stress Analysis
222SVY1500 Spatial Science for Engineers
Approved courses (x4)
Practice Courses
3AGR2902 Field Practice
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV120819© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
2AGR3903 Soil and Water Engineering Practice 2
3AGR3905 Agricultural Engineering Practice
2,322CIV2901 Geology and Geomechanics Practice
1,2,322ENV2902 Hydraulics Practice
Civil Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
222CIV2503 Structural Design I
111CIV2605 Construction Engineering
222CIV3403 Geotechnical Engineering
111CIV3505 Structural Analysis
111CIV3506 Concrete Structures
222CIV3703 Transport Engineering
111CIV4508 Structural Design II
111ENV2103 Hydraulics I
111ENV3104 Hydraulics II
222ENV3105 Hydrology
222ENV4203 Public Health Engineering
1,2,31,21,2MEC1201 Engineering Materials
111MEC2402 Stress Analysis
222SVY1500 Spatial Science for Engineers
Approved course (x5)
Practice Courses
2,322CIV2901 Geology and Geomechanics Practice
311CIV3906 Civil Materials Practice
3CIV3907 Civil Systems Practice
2CIV4908 Civil Design Practice
1,2,322ENV2902 Hydraulics Practice
Computer Systems Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
1,2,31,21,2CSC1401 Foundation Programming
22CSC2401 Algorithms and Data Structures
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208110© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
11CSC2402 Object-Oriented Programming in C++
1,21,21,2CSC2408 Software Development Tools
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
11ELE2601 Telecommunications Principles
111ELE3105 Computer Controlled Systems
222ELE3107 Signal Processing
111ELE3305 Computer Systems and CommunicationsProtocols
222ELE3307 Real Time Systems
111MAT1101 Discrete Mathematics for Computing
Approved Courses (x6)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
222ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
222ELE3915 Electrical and Electronic Practice E
Electrical and Electronic Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
222ELE2504 Electronic Design and Analysis
11ELE2601 Telecommunications Principles
111ELE3105 Computer Controlled Systems
222ELE3107 Signal Processing
111ELE3305 Computer Systems and CommunicationsProtocols
222ELE3307 Real Time Systems
222ELE3506 Electronic Measurement
111ELE3803 Electrical Plant
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208111© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
11ELE4605 Fields and Waves
22ELE4606 Communication Systems
1,2,31,21,2MEC1201 Engineering Materials
Approved Courses (x5)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
222ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
222ELE3915 Electrical and Electronic Practice E
Environmental Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
11AGR3304 Soil Science
2,322CIV1501 Engineering Statics
222CIV2403 Geology and Geomechanics
111ENV2103 Hydraulics I
11ENV2105 Applied Chemistry and Microbiology
111ENV2201 Land Studies
22ENV3103 Environmental Pollution
111ENV3104 Hydraulics II
222ENV3105 Hydrology
22ENV4106 Irrigation Science
22ENV4107 Water Resources Engineering
222ENV4203 Public Health Engineering
11ENV4204 Environmental Technology
11ENV4205 Water and Wastewater Treatment
1,2,31,21,2MEC1201 Engineering Materials
222SVY1500 Spatial Science for Engineers
Approved courses (x5)
Practice Courses
3AGR2902 Field Practice
2AGR3903 Soil and Water Engineering Practice 2
2,322CIV2901 Geology and Geomechanics Practice
1,2,322ENV2902 Hydraulics Practice
3ENV3904 Environmental Engineering Practice
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208112© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Instrumentation Control and Automation Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
222ELE2504 Electronic Design and Analysis
111ELE3105 Computer Controlled Systems
222ELE3307 Real Time Systems
222ELE3506 Electronic Measurement
1 (odd yearsonly)
ELE4109 Measurement Science and InstrumentEngineering
1ELE4506 Industrial Process Automation
1,2,31,21,2MEC1201 Engineering Materials
222MEC2106 Introduction to Thermofluids
1MEC2501 Process Control Systems
111MEC3107 Thermofluids
111MEC4108 Advanced Thermofluids
22MEC4406 Robotics and Machine Vision
Approved Courses (x4)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
222ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
2MEC3905 Mechatronic Practice
Mechanical Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
222CIV1501 Engineering Statics
2,322ELE1801 Electrical Technology
1,2,31,21,2MEC1201 Engineering Materials
222MEC2106 Introduction to Thermofluids
111MEC2202 Manufacturing Processes
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208113© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
222MEC2301 Design of Machine Elements
222MEC2304 Solid Modelling
111MEC2401 Dynamics I
111MEC2402 Stress Analysis
222MEC2406 Introduction to Mechatronics andAutomation
111MEC3107 Thermofluids
111MEC3203 Materials Technology
222MEC3204 Production Engineering
111MEC3302 Computational Mechanics in Design
222MEC3303 Mechanical and Mechatronic SystemDesign
222MEC3403 Dynamics II
22MEC4104 Renewable Energy Technology
111MEC4108 Advanced Thermofluids
Approved Course (x3)
Practice Courses
311MEC2901 Mechanical Practice 1
111MEC2902 Mechanical Practice 2
32MEC3903 Mechanical Practice 3
22MEC3904 Mechanical Practice 4
Mechatronic Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
222CIV1501 Engineering Statics
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
222ELE2504 Electronic Design and Analysis
111ELE3105 Computer Controlled Systems
222ELE3506 Electronic Measurement
1,2,31,21,2MEC1201 Engineering Materials
111MEC2202 Manufacturing Processes
222MEC2301 Design of Machine Elements
222MEC2304 Solid Modelling
111MEC2401 Dynamics I
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208114© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
111MEC2402 Stress Analysis
222MEC2406 Introduction to Mechatronics andAutomation
111MEC3302 Computational Mechanics in Design
222MEC3303 Mechanical and Mechatronic SystemDesign
222MEC3403 Dynamics II
22MEC4406 Robotics and Machine Vision
Approved Course (x1)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311MEC2901 Mechanical Practice 1
111MEC2902 Mechanical Practice 2
2MEC3905 Mechatronic Practice
Power Engineering major courses
Semester(s) OfferedCourses
OnlineExternalSpringfieldToowoomba
Academic Courses
111ELE1301 Computer Engineering
111ELE1502 Electronic Circuits
2,322ELE1801 Electrical Technology
222ELE2103 Linear Systems and Control
111ELE2303 Embedded Systems Design
222ELE2504 Electronic Design and Analysis
22ELE2704 Electricity Supply Systems
111ELE3105 Computer Controlled Systems
111ELE3305 Computer Systems and CommunicationsProtocols
111ELE3803 Electrical Plant
1ELE3804 Power Systems Protection
222ELE3805 Power Electronics Principles andApplications
11ELE3807 Power Systems Analysis
1,2,31,21,2MEC1201 Engineering Materials
222MEC2106 Introduction to Thermofluids
22MEC4104 Renewable Energy Technology
Approved Courses (x5)
Practice Courses
322ELE1911 Electrical and Electronic Practice A
311ELE2912 Electrical and Electronic Practice B
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208115© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
222ELE2913 Electrical and Electronic Practice C
31ELE3914 Electrical and Electronic Practice D
222ELE3915 Electrical and Electronic Practice E
Electives/Approved coursesAppropriate approved courses in each major are shown in the tables in the Recommended Enrolment Patternsection. The Program Coordinator may approve a variation in approved course studies where the student candemonstrate that there is a sound academic argument for the change. Arguments based on timetable difficulties,quota problems etc. will not normally be entertained. Note however that students who wish to enrol in a courseother than those listed must obtain the written approval of the Program Coordinator prior to enrolling in thecourse if they want the course to count as credit towards their award.
Students should note that quota restrictions may preclude their enrolment in particular approved courses asstudents enrolling in these courses as part of their core or major studies will be given enrolment priority.
Practical experienceTo be eligible to graduate from the Bachelor of Engineering (Honours), students must obtain an aggregate ofat least 60 days of suitable work experience during their program. This experience may be in an engineeringoffice or laboratory where the student would be working principally with professional engineers and engineeringassociates. It may, however, be preferable for students to spend some time in field or factory activities to gaininsight into industrial practice and to see what is involved in converting designs into finished products. Studentsare required to enrol in ENG4909 Work Experience - Professional in the latter part of their program and keepa record of appropriate experience as specified in the Course Specification. The work experience is to beendorsed by an appropriate person in the organisation providing the experience and submitted to the examiner.The student must meet all costs associated with the acquisition of work experience to satisfy this requirement.The record of work experience must be made available for perusal by the Faculty of Health, Engineering andSciences upon request. The acceptability or otherwise of employment experience, and the period of that typeof experience that may be credited towards the 60 days, will be determined by the Examiner of ENG4909Work Experience - Professional.
Credit or exemptions for ENG4909 Work Experience - Professional will not normally be considered.
IT requirementsStudents should visit the USQ minimum computing standards to check that their computers are capable ofrunning the appropriate software and versions of Internet web browsers and to check the minimum andrecommended standards for software.
Residential schoolsThe attendance requirement of residential schools within this degree is indicated by the following letters: V= Voluntary; O = Optional; C = Compulsory; R = Recommended; HR = Highly Recommended; M = Mandatory.To find out more about residential schools, visit the Residential School Schedule to view specific dates foryour degree, or visit the Policy and Procedure Library.
Students are required to undertake practical and professional activities relevant to their program throughenrolment in a series of Practice courses in the program. Practice courses are zero unit courses that may beundertaken in either on-campus or external mode and the final grades available are Pass (P)/Fail (F) only.They are a compulsory part of the program and do not attract a student contribution charge for Australianresidents or a tuition fee for international students. The recommended enrolment schedule for Practice coursesis shown in the Recommended Enrolment Pattern for the program in this Handbook.
External students must attend a number of residential schools during their program to obtain experience inpractical and professional activities appropriate to the program. The residential schools are included in Practicecourses which are conducted in Semester 3 or during the recess periods. The dates for each residential schoolPractice course are shown in the Residential School Schedule in this Handbook and external students should
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208116© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
ensure they are able to attend the residential school prior to enrolling in a Practice course. Personal protectiveequipment is compulsory in many engineering, construction and spatial science laboratories, students shouldconfirm the requirements before attending residential schools for Practice courses.
Students who enrol in on-campus mode for Practice courses normally undertake a series of weekly activitiesand/or attend a compulsory residential school.
ENG3902 Professional Practice 1 and ENG4110 Engineering Research Methodology are to be studied in thestudent's penultimate year. Upon completion of ENG3902 Professional Practice 1 and ENG4110 EngineeringResearch Methodology, students must study ENG4111 Research Project Part 1, ENG4112 Research ProjectPart 2 and ENG4903 Professional Practice 2 in the same academic year.
Agricultural Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR3903 Soil and Water Engineering Practice 2● AGR3905 Agricultural Engineering Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Civil Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● CIV3906 Civil Materials Practice● CIV3907 Civil Systems Practice● CIV4908 Civil Design Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Computer Systems Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Electrical and Electronic Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208117© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Environmental Engineering
● ENG1901 Engineering Practice 1● CIV2901 Geology and Geomechanics Practice● ENV2902 Hydraulics Practice● AGR2902 Field Practice● ENV3904 Environmental Engineering Practice● AGR3903 Soil and Water Engineering Practice 2● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1(Elective)● CHE2120 Chemistry 2 (Elective)
Instrumentation Control and Automation Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● MEC3905 Mechatronic Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)
Mechanical Engineering
● ENG1901 Engineering Practice 1● MEC2901 Mechanical Practice 1● MEC2902 Mechanical Practice 2● MEC3903 Mechanical Practice 3● MEC3904 Mechanical Practice 4● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Mechatronic Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● MEC2901 Mechanical Practice 1● MEC2902 Mechanical Practice 2● MEC3905 Mechatronic Practice● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2
Power Engineering
● ENG1901 Engineering Practice 1● ELE1911 Electrical and Electronic Practice A● ELE2912 Electrical and Electronic Practice B● ELE2913 Electrical and Electronic Practice C● ELE3914 Electrical and Electronic Practice D● ELE3915 Electrical and Electronic Practice E● ENG3902 Professional Practice 1● ENG4903 Professional Practice 2● CHE1110 Chemistry 1 (Elective)
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208118© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Related programsStudents may combine the Bachelor of Engineering (Honours) with a program from another area of study.Currently the following combined programs have been accredited by the University and Engineers Australia:
● Bachelor of Engineering (Honours) Bachelor of Business and Commerce● Bachelor of Engineering (Honours) Bachelor of Information Technology● Bachelor of Engineering (Honours) Bachelor of Science.
Exit pointsStudents who, for whatever reason, are unable to complete the Bachelor of Engineering (Honours) and whosatisfy all of the requirements of either the Bachelor of Engineering Science, the Associate Degree of Engineering or the Diploma of Engineering Studies may be permitted to exit with that award.
CreditExemptions/credit will be assessed based on the USQ Credit and Exemption Procedure.
Work Experience
Work and industrial experience that has not been formally assessed, does not normally qualify for coursecredit in the Bachelor of Engineering (Honours) program. Existing work experience may be used to satisfythe practical/work experience requirements when completing the ENG4909 Work Experience - Professionalpractice course.
HonoursThe level of honours awarded will be determined based on the USQ procedure. Please refer to the Class ofHonours Standard Schedule.
Agricultural Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,321CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
1,2,321ENG2002 Technology, Sustainability and Society
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208119© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,311,21ENG1901 Engineering Practice 1
Academic Courses Year 2
112AGR2302 Agricultural MachineryPre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCENPre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
222AGR2301 Agricultural SciencePre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCENPre-requisite: MEC2402 orStudents must be enrolled in
222MEC2301 Design of Machine Elements
one of the following Programs: MEPR or GCEN
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite: ENV2103 orENV1101
M1,2,322ENV2902 Hydraulics Practice
M3AGR2902 Field Practice^
Academic Courses Year 3
113AGR3303 Agricultural Materials and Post-HarvestTechnologies
113AGR3304 Soil SciencePre-requisite: ENV1101 orENV2103 or Students must
113ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208120© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
113MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS
223AGR3305 Precision and Smart Technologies in Agriculture223Approved Course (Select from minor or approved course
list)223ENV3105 Hydrology223ENG4110 Engineering Research Methodology
Practice Courses Year 3
M2AGR3903 Soil and Water Engineering Practice 2M3AGR3905 Agricultural Engineering PracticeM2ENG3902 Professional Practice 1
Academic Courses Year 4
1,314ENG3003 Engineering Management†
114AGR4305 Agricultural Soil MechanicsPre-requisite: ENG3902 andENG4110
114ENG4111 Research Project Part 1
114Approved Course (Select from minor or approved courselist)
Pre-requisite: AGR3304 orStudents must be enrolled in
224ENV4106 Irrigation Science
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
224Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG4111224ENG4112 Research Project Part 2224Approved Course (Select from minor or approved course
list)
Practice Courses Year 4
Pre-requisite: ENG3902. Students cannot enrol in
M214ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
Pre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11ELE1301 Computer Engineering32ELE2103 Linear Systems and Control
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208121© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: ENM160022MEC2406 Introduction to Mechatronics and AutomationPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
2CLI2201 Climate Change and VariabilityPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
22BIO1100 Biology Concepts11REN1201 Environmental Studies
FootnotesThe residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208122© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Agricultural Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 2
1,21ENG1004 Engineering Problem Solving Principles1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society22SVY1500 Spatial Science for Engineers
Year 3
11AGR2302 Agricultural MachineryPre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR
22AGR2301 Agricultural SciencePre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
Year 3 Practice Courses
M3AGR2902 Field Practice^
Year 4
Pre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCENPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208123© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCENPre-requisite: MEC2402 orStudents must be enrolled in
22MEC2301 Design of Machine Elements
one of the following Programs: MEPR or GCEN
Year 4 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Pre-requisite: ENV2103 orENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 5
11AGR3303 Agricultural Materials and Post-HarvestTechnologies
11AGR3304 Soil ScienceApproved Course (Select from minor or approved courselist)
22AGR3305 Precision and Smart Technologies in Agriculture
Year 6
Pre-requisite: ENV1101 orENV2103 or Students must
11ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS
22ENV3105 HydrologyApproved Course (Select from minor or approved courselist)
Year 6 Practice Courses
M2AGR3903 Soil and Water Engineering Practice 2M3AGR3905 Agricultural Engineering Practice
Year 7
1,31ENG3003 Engineering Management†
11AGR4305 Agricultural Soil Mechanics22ENG4110 Engineering Research Methodology
Pre-requisite: AGR3304 orStudents must be enrolled in
22ENV4106 Irrigation Science
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208124© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 7 Practice Courses
M2ENG3902 Professional Practice 1
Year 8
Pre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG411122ENG4112 Research Project Part 2Approved Course (Select from minor or approved courselist)
Year 8 Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
Pre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11ELE1301 Computer Engineering32ELE2103 Linear Systems and Control2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208125© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Agricultural Engineering (Major Study Code: 16922)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1,31GIS1402 Geographic Information SystemsPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: ENM160022MEC2406 Introduction to Mechatronics and AutomationPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
2CLI2201 Climate Change and VariabilityPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
22BIO1100 Biology Concepts11REN1201 Environmental Studies
FootnotesThe residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@
Civil Engineering major full-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Approved courses are included in the list of Academic courses. Students should select these courses from theapproved courses listing.
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,2,311MEC1201 Engineering Materials1,221ENG1100 Introduction to Engineering Design
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,321CIV1501 Engineering Statics
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208126© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,31,21ENG1901 Engineering Practice 1
Academic Courses Year 2
Pre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCENPre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
112CIV2605 Construction Engineering122Approved Course (Select from minor or approved course
list)Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCENPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
222CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in the following: GCEN
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite: ENV2103 orENV1101
M1,2,322ENV2902 Hydraulics Practice
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208127© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 3
Pre-requisite: ENV1101 orENV2103 or Students must
113ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC2402 and(MAT1502 or ENM1600 or
113CIV3505 Structural Analysis
MAT1102) or Students mustbe enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: CIV2503 or Students must be enrolled in
113CIV3506 Concrete Structures
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
1,313ENG3003 Engineering Management†
Pre-requisite: CIV2401 orCIV2403 or Students must be
223CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
223ENV3105 Hydrology223CIV3703 Transport Engineering223ENG4110 Engineering Research Methodology
Practice Courses Year 3
Pre-requisite: MEC1201 andENG1901 or Students must
M313CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNHPre-requisite: CIV2503 or Students must be enrolled in
M33CIV3907 Civil Systems Practice
one of the following Programs: GDNS or MENS
M2ENG3902 Professional Practice 1
Academic Courses Year 4
Pre-requisite: CIV3505 andCIV3506 or Students must be
114CIV4508 Structural Design II
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
114Approved Courses (Select from minor or approved courselist)
Pre-requisite: ENG3902 andENG4110
114ENG4111 Research Project Part 1
114Approved Courses (Select from minor or approved courselist)
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208128© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
224Approved Courses (Select from minor or approved courselist)
Pre-requisite: ENV1101 orENV2103 or Students must
224ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENG4111224ENG4112 Research Project Part 2
224Approved Course (Select from minor or approved courselist)
Practice Courses Year 4
Pre-requisite: CIV4508 or Students must be enrolled in
M2CIV4908 Civil Design Practice
one of the following Programs: MEPR or GDNS or MENSPre-requisite: ENG3902. Students cannot enrol in
M214ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
11AGR3304 Soil Science2CIV3603 Construction Methods
Pre-requisite: CIV3506 or(MEC2402 and MEC3203)
1CIV4803 Mechanics and Technology of FibreComposites
2CIV5704 Road and Street EngineeringPre-requisite: CIV3703 or Students must be enrolled in
11CIV5705 Pavement Design and Analysis*
one of the following Programs: GCNS or GDNS or MENSor PGCN or GCAE or MEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPR
2,32ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information Systems
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208129© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
22URP3201 Sustainable Urban Design and Development11URP1001 Introduction to Urban and Regional Planning
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†Online mode only in 2019 (not available on-campus)*The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@
Civil Engineering major part-time recommended enrolment pattern (Toowoomba andSpringfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
Year 2
1,21ENG1004 Engineering Problem Solving Principles1,2,31,2MEC1201 Engineering Materials1,2,31,2ENG2002 Technology, Sustainability and Society22SVY1500 Spatial Science for Engineers
Year 2 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208130© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN
Approved Course (Select from minor or approved courselist)
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
Year 3 Practice Courses
Pre-requisite: ENV2103 orENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 4
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
11CIV2605 Construction EngineeringPre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCENPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in the following: GCEN
Year 4 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Year 5
Pre-requisite: ENV1101 orENV2103 or Students must
11ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: MEC2402 and(MAT1502 or ENM1600 or
11CIV3505 Structural Analysis
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208131© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
MAT1102) or Students mustbe enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
22ENV3105 Hydrology
Year 5 Practice Courses
Pre-requisite: MEC1201 andENG1901 or Students must
31CIV3906 Civil Materials Practice
be enrolled in one of the following programs: ADCN orBCON or BCNH
Year 6
Pre-requisite: CIV2503 or Students must be enrolled in
11CIV3506 Concrete Structures
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
1,31ENG3003 Engineering Management†
22CIV3703 Transport EngineeringApproved Course (Select from minor or approved courselist)
Year 6 Practice Courses
Pre-requisite: CIV2503 or Students must be enrolled in
3CIV3907 Civil Systems Practice
one of the following Programs: GDNS or MENS
Year 7
Pre-requisite: CIV3505 andCIV3506 or Students must be
11CIV4508 Structural Design II
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
Approved Course (Select from minor or approved courselist)
22ENG4110 Engineering Research MethodologyPre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
Year 7 Practice Courses
M2ENG3902 Professional Practice 1
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208132© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 8
Pre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG41111,21,2ENG4112 Research Project Part 2Approved Course (Select from minor or approved courselist)
Year 8 Practice Courses
Pre-requisite: CIV4508 or Students must be enrolled in
2CIV4908 Civil Design Practice
one of the following Programs: MEPR or GDNS or MENSPre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
11AGR3304 Soil Science2CIV3603 Construction Methods
Pre-requisite: CIV3506 or(MEC2402 and MEC3203)
1CIV4803 Mechanics and Technology of FibreComposites
2CIV5704 Road and Street EngineeringPre-requisite: CIV3703 or Students must be enrolled in
11CIV5705 Pavement Design and Analysis*
one of the following Programs: GCNS or GDNS or MENSor PGCN or GCAE or MEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPR
2,32ENG4004 Engineering Project and Operations
Management‡
11ENV2201 Land StudiesPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
1,31GIS1402 Geographic Information SystemsPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208133© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Civil Engineering (Major Study Code: 16923)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: SVY1102 orSVY1500 or Students must
22SVY1104 Survey Computations A
be enrolled in one of the following Programs: GCST orGDST or MSPT
22URP3201 Sustainable Urban Design and Development11URP1001 Introduction to Urban and Regional Planning
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†Online mode only in 2019 (not available on-campus)*The semester 3 offering of this course is offered in even numbered years only.‡Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@
Computer Systems Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles111ELE1301 Computer Engineering111ELE1502 Electronic Circuits1,221ENG1002 Introduction to Engineering and Built
Environment Applications1,2,321CSC1401 Foundation Programming
Pre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,321ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
1,221ENG1100 Introduction to Engineering Design
Practice Courses Year 1
M2,31,21ENG1901 Engineering Practice 1M321ELE1911 Electrical and Electronic Practice A
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208134© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 2
Pre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR
112ELE2303 Embedded Systems DesignPre-requisite: CSC1401 orStudents must be enrolled in
112CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
112MAT1101 Discrete Mathematics for Computing222ELE2103 Linear Systems and Control1,2,322ENG2002 Technology, Sustainability and Society
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
222Approved Course (Select from minor or approved courselist)
Practice Courses Year 2
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
M222ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Academic Courses Year 3
Pre-requisite: (ELE1502 andELE1801) or Students must
113ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETCPre-requisite: ELE2103 or Students must be enrolled in
113ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METC
113ELE3305 Computer Systems and CommunicationsProtocols
1,2,313Approved Course (Select from minor or approved courselist)
Pre-requisite: ELE1301 or Students must be enrolled in
223ELE3307 Real Time Systems
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208135© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GCEN or METC or MENSor MEPR
223Approved Course (Select from minor or approved courselist)
223ELE3107 Signal Processing223ENG4110 Engineering Research Methodology
Practice Courses Year 3
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M313ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S
M223ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPR
M2ENG3902 Professional Practice 1
Academic Courses Year 4
114Approved Course (Select from minor or approved courselist)
1,214CSC2408 Software Development Tools1,314ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110
114ENG4111 Research Project Part 1
224Approved Course (Select from minor or approved courselist)
Pre-requisite: CSC2402 orStudents must be enrolled in
224CSC2401 Algorithms and Data Structures
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ENG4111224ENG4112 Research Project Part 2
2,324Approved Course (Select from minor or approved courselist)
Practice Courses Year 4
Pre-requisite: ENG3902. Students cannot enrol in
M214ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
11CSC3400 Database SystemsPre-requisite: CSC2402 orenrolled in CSC2402 at the
11CSC3403 Comparative Programming Languages
same time as CSC3403 orStudents must be enrolled inone of the following Program
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208136© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT
11CSC3407 Network Fundamentals and Routing11CSC3412 System and Security Administration22CSC3413 Network Design and Analysis
Pre-requisite: CSC3407 orStudents must be enrolled in
11CSC3420 Mobile Internet Technology
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: CSC3407 orStudents must be enrolled in
22CSC3427 Switching, Wireless and WAN Technologies
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCENPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled inthe following Program: GCEN
1ELE3804 Power Systems Protection
Pre-requisite: (ELE2504 andELE2601) or Students must
22ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPR
2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208137© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ELE2103 or(MEC1501 and ELE2101 asCo-requisite or Pre-requisite)
2MEC2501 Process Control Systems
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡
Computer Systems Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles11ELE1301 Computer Engineering11ELE1502 Electronic Circuits
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 2
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,2,31,2CSC1401 Foundation ProgrammingPre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,32ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
1,21,2ENG1100 Introduction to Engineering Design
Year 2 Practice Courses
M32ELE1911 Electrical and Electronic Practice A
Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Program
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208138© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MENSor GDNS or MEPR
11ELE2303 Embedded Systems Design22ELE2103 Linear Systems and Control1,2,31,2ENG2002 Technology, Sustainability and Society
Year 3 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M31ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 4
Pre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
11MAT1101 Discrete Mathematics for ComputingPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
Approved Course (Select from minor or approved courselist)
Year 4 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M22ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 5
Pre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETCPre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCPre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Programs: GCEN or METC or MENSor MEPR
Approved Course (Select from minor or approved courselist)
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208139© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 5 Practice Courses
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M31ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
Year 6
11ELE3305 Computer Systems and CommunicationsProtocolsApproved Course (Select from minor or approved courselist)
22ELE3107 Signal ProcessingApproved Course (Select from minor or approved courselist)
Year 6 Practice Courses
Pre-requisite: ELE1801 andELE1301 and ELE1502 or S
M22ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPR
Year 7
1,21,2CSC2408 Software Development ToolsApproved Course (Select from minor or approved courselist)
22ENG4110 Engineering Research MethodologyPre-requisite: CSC2402 orStudents must be enrolled in
22CSC2401 Algorithms and Data Structures
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT
Year 7 Practice Courses
M2ENG3902 Professional Practice 1
Year 8
1,31ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG41111,21,2ENG4112 Research Project Part 2
Year 8 Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208140© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
11CSC3400 Database SystemsPre-requisite: CSC2402 orenrolled in CSC2402 at the
11CSC3403 Comparative Programming Languages
same time as CSC3403 orStudents must be enrolled inone of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT
11CSC3407 Network Fundamentals and Routing11CSC3412 System and Security Administration22CSC3413 Network Design and Analysis
Pre-requisite: CSC3407 orStudents must be enrolled in
11CSC3420 Mobile Internet Technology
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: CSC3407 orStudents must be enrolled in
22CSC3427 Switching, Wireless and WAN Technologies
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPITPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCENPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: ELE1801 or Students must be enrolled inthe following Program: GCEN
1ELE3804 Power Systems Protection
Pre-requisite: (ELE2504 andELE2601) or Students must
22ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208141© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Computer Systems Engineering (Major Study Code: 16924)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
the following Program: GCNS, GDNS, MENS or MEPR
2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCENPre-requisite: ELE2103 or(MEC1501 and ELE2101 asCo-requisite or Pre-requisite)
2MEC2501 Process Control Systems
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡
Electrical and Electronic Engineering major full-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles111ELE1301 Computer Engineering111ELE1502 Electronic Circuits1,221ENG1002 Introduction to Engineering and Built
Environment Applications1,2,321MEC1201 Engineering Materials
Pre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,321ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
1,221ENG1100 Introduction to Engineering Design
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208142© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses Year 1
M2,311,21ENG1901 Engineering Practice 1M321ELE1911 Electrical and Electronic Practice A
Academic Courses Year 2
Pre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR
112ELE2303 Embedded Systems Design1,2,312ENG2002 Technology, Sustainability and Society
Pre-requisite: (ELE1502 andELE1801) or Students must
112ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC
222ELE2103 Linear Systems and ControlPre-requisite: ELE1301 or Students must be enrolled in
222ELE3307 Real Time Systems
one of the following Programs: GCEN or METC or MENSor MEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: ELE1502 or Students must be enrolled in
222ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN
Practice Courses Year 2
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
M222ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Academic Courses Year 3
Pre-requisite: ELE1801 or Students must be enrolled in
113ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
113ELE3305 Computer Systems and CommunicationsProtocols
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208143© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
113Approved Course (Select from minor or approved courselist)
Pre-requisite: ELE2103 or Students must be enrolled in
113ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
223ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
223Approved Course (Select from minor or approved courselist)
223ELE3107 Signal Processing223ENG4110 Engineering Research Methodology
Practice Courses Year 3
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M313ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S
M223ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPR
M2ENG3902 Professional Practice 1
Academic Courses Year 4
Pre-requisite: {(MAT1502 orENM1600) and ELE2103 and
114ELE4605 Fields and Waves
ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNS
114Approved Course (Select from minor or approved courselist)
1,314ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110
114ENG4111 Research Project Part 1
224Approved Course (Select from minor or approved courselist)
Pre-requisite: (ELE2504 andELE2601) or Students must
224ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ENG4111224ENG4112 Research Project Part 2
2,324Approved Course (Select from minor or approved courselist)
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208144© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses Year 4
Pre-requisite: ENG3902. Students cannot enrol in
M214ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
Pre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCPre-requisite: ELE1801 or Students must be enrolled inthe following Program: GCEN
1ELE3804 Power Systems Protection
Pre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11ELE3807 Power Systems Analysis1ELE4109 Measurement Science and Instrument
EngineeringPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPR
1,21,2CSC1401 Foundation ProgrammingPre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNPre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCENPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENSPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208145© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ELE2103 or(MEC1501 and ELE2101 asCo-requisite or Pre-requisite)
2MEC2501 Process Control Systems
22MEC3204 Production EngineeringPre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
2,32ENG4004 Engineering Project and Operations
Management‡
HR11CHE1110 Chemistry 1^
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^
Electrical and Electronic Engineering major part-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles1,21,2ENG1002 Introduction to Engineering and Built
Environment Applications1,2,31,2MEC1201 Engineering Materials
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208146© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 2
11ELE1301 Computer Engineering11ELE1502 Electronic Circuits
Pre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,32ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
1,21,2ENG1100 Introduction to Engineering Design
Year 2 Practice Courses
M32ELE1911 Electrical and Electronic Practice A
Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR
11ELE2303 Embedded Systems Design22ELE2103 Linear Systems and Control
Pre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Programs: GCEN or METC or MENSor MEPR
Year 3 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M31ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 4
1,2,31,2ENG2002 Technology, Sustainability and SocietyPre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETCPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208147© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 4 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M22ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 5
Pre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
11ELE3305 Computer Systems and CommunicationsProtocols
Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
12Approved Course (Select from minor or approved courselist)
Year 5 Practice Courses
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M31ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
Year 6
Pre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METC
11Approved Course (Select from minor or approved courselist)
22ELE3107 Signal Processing22Approved Course (Select from minor or approved course
list)
Year 6 Practice Courses
Pre-requisite: ELE1801 andELE1301 and ELE1502 or S
M22ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPR
Year 7
Pre-requisite: {(MAT1502 orENM1600) and ELE2103 and
11ELE4605 Fields and Waves
ELE2601} or Students mustbe enrolled in one of the fol
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208148© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
lowing Programs: MEPR orMENS or GCNS or GDNS
11Approved Course (Select from minor or approved courselist)
22ENG4110 Engineering Research MethodologyPre-requisite: (ELE2504 andELE2601) or Students must
22ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNS
Year 7 Practice Courses
M2ENG3902 Professional Practice 1
Year 8
1,31ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
22Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG41111,21,2ENG4112 Research Project Part 2
Year 8 Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
Pre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCPre-requisite: ELE1801 or Students must be enrolled inthe following Program: GCEN
1ELE3804 Power Systems Protection
Pre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11ELE3807 Power Systems Analysis1ELE4109 Measurement Science and Instrument
EngineeringPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208149© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Electrical and Electronic Engineering (Major Study Code: 16925)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
the following Program: GCNS, GDNS, MENS or MEPR
1,21,2CSC1401 Foundation ProgrammingPre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTNPre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCENPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENSPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ELE2103 or(MEC1501 and ELE2101 asCo-requisite or Pre-requisite)
2MEC2501 Process Control Systems
22MEC3204 Production EngineeringPre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
2,32ENG4004 Engineering Project and Operations
Management‡
HR11CHE1110 Chemistry 1^
FootnotesThe semester 3 offering of this course is offered in odd numbered years only.†The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208150© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Environmental Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,2,311MEC1201 Engineering Materials
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,321CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
1,221ENG1100 Introduction to Engineering Design2,321ENG2002 Technology, Sustainability and Society221SVY1500 Spatial Science for Engineers
Practice Courses Year 1
M2,31,21ENG1901 Engineering Practice 1
Academic Courses Year 2
112ENV2201 Land StudiesPre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: CIV1500 orCIV1501 or Students must be
112ENV2103 Hydraulics I
enrolled in the following Program: GCEN
112ENV2105 Applied Chemistry and Microbiology1,2,322Approved Course (Select from minor or approved course
list)Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: CIV1501 orCIV1500 or Students must be
222CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208151© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
222Approved Course (Select from minor or approved courselist)
Practice Courses Year 2
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,322CIV2901 Geology and Geomechanics Practice
Pre-requisite: ENV2103 orENV1101
M1,2,322ENV2902 Hydraulics Practice
M3AGR2902 Field Practice^
Academic Courses Year 3
113AGR3304 Soil SciencePre-requisite: ENV1101 orENV2103 or Students must
113ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1,313ENG3003 Engineering Management†
113Approved Course (Select from minor or approved courselist)
Pre-requisite: ENV2105 andENV2103 or Students must
223ENV3103 Environmental Pollution
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
223ENV3105 HydrologyPre-requisite: ENV1101 orENV2103 or Students must
223ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
223ENG4110 Engineering Research Methodology
Practice Courses Year 3
M2AGR3903 Soil and Water Engineering Practice 2Pre-requisite: ENV4203 orStudents must be enrolled in
M3ENV3904 Environmental Engineering Practice
one of the following Programs: GDNS or MENS
M2ENG3902 Professional Practice 1
Academic Courses Year 4
Pre-requisite: ENV2105 orStudents must be enrolled in
114ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
114Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG3902 andENG4110
114ENG4111 Research Project Part 1
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208152© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENV4203 andENV2105 or Students must
114ENV4205 Water and Wastewater Treatment<
be enrolled in one of the following Programs: PDEV orGCEN or METC or MEPR orGCNS or GDNS or MENS
224Approved Course (Select from minor or approved courselist)
Pre-requisite: AGR3304 orStudents must be enrolled in
224ENV4106 Irrigation Science
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (ENV3104 andENV3105) or Students must
224ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: ENG4111224ENG4112 Research Project Part 2
Practice Courses Year 4
Pre-requisite: ENG3902. Students cannot enrol in
M214ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
22AGR3305 Precision and Smart Technologies inAgriculture
11CLI1110 Weather and ClimateHR11CHE1110 Chemistry 1~
Pre-requisite: CHE1110HR22CHE2120 Chemistry 2~
Pre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
22CIV3703 Transport Engineering1,2,31ECO1000 Economics2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPR
1,31GIS1402 Geographic Information SystemsCo-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law*
REN1201 or (Students enrolled in BEDU (Legal Stud
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208153© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
ies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)Pre-requisite: MAT1102 orENM1600 or equivalent or
22MAT2200 Operations Research 1
approval from the examiner.Enrolment is not permitted inMAT2200 if MAT1200 hasbeen previously completed.
22URP3201 Sustainable Urban Design and Development11SVY3202 Photogrammetry and Remote Sensing11URP1001 Introduction to Urban and Regional Planning
FootnotesThe residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†Online mode only in 2019 (not available on-campus)<CHE1110 and CHE2120 have a highly recommended residential school component in external mode.~The semester 3 offering of this course is offered in even numbered years only.‡On-campus mode at Springfield only.*
Environmental Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics22SVY1500 Spatial Science for Engineers1,2,31,2MEC1201 Engineering Materials
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 2
1,21,2ENG1100 Introduction to Engineering DesignPre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
1,21ENG1004 Engineering Problem Solving Principles1,2,31,2ENG2002 Technology, Sustainability and Society
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208154© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: CIV1500 orCIV1501 or Students must be
11ENV2103 Hydraulics I
enrolled in the following Program: GCEN
Approved Course (Select from minor or approved courselist)
Pre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN
Year 3 Practice Courses
Pre-requisite: ENV2103 orENV1101
M1,2,32ENV2902 Hydraulics Practice
Year 4
11ENV2105 Applied Chemistry and Microbiology11ENV2201 Land Studies
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
2,32Approved Course (Select from minor or approved courselist)
Year 4 Practice Courses
Pre-requisite or Co-requisite:ENG1901 and CIV2403
M2,32CIV2901 Geology and Geomechanics Practice
Year 5
Pre-requisite: ENV1101 orENV2103 or Students must
11ENV3104 Hydraulics II
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
11AGR3304 Soil SciencePre-requisite: ENV2105 andENV2103 or Students must
22ENV3103 Environmental Pollution
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
22ENV3105 Hydrology
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208155© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 5 Practice Courses
M3AGR2902 Field Practice^
Year 6
Pre-requisite: ENV1101 orENV2103 or Students must
22ENV4203 Public Health Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1,31ENG3003 Engineering Management†
Pre-requisite: AGR3304 orStudents must be enrolled in
22ENV4106 Irrigation Science
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
Approved Course (Select from minor or approved courselist)
Year 6 Practice Courses
Pre-requisite: ENV4203 orStudents must be enrolled in
M3ENV3904 Environmental Engineering Practice
one of the following Programs: GDNS or MENS
Year 7
Pre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENSPre-requisite: (ENV3104 andENV3105) or Students must
22ENV4107 Water Resources Engineering
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
22ENG4110 Engineering Research MethodologyPre-requisite: ENV4203 andENV2105 or Students must
11ENV4205 Water and Wastewater Treatment
be enrolled in one of the following Programs: PDEV orGCEN or METC or MEPR orGCNS or GDNS or MENS
Year 7 Practice Courses
M2AGR3903 Soil and Water Engineering Practice 2M2ENG3902 Professional Practice 1
Year 8
Pre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
Approved Course (Select from minor or approved courselist)
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208156© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Environmental Engineering (Major Study Code: 16926)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ENG41111,21,2ENG4112 Research Project Part 2Approved Course (Select from minor or approved courselist)
Year 8 Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
1,21,2AGR3305 Precision and Smart Technologies inAgriculture
11CLI1110 Weather and ClimateHR11CHE1110 Chemistry 1~
Pre-requisite: CHE1110HR22CHE2120 Chemistry 2~
Pre-requisite: CIV2401 orCIV2403 or Students must be
22CIV3403 Geotechnical Engineering
enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
22CIV3703 Transport Engineering1,2,31ECO1000 Economics2,32ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPR
1,31GIS1402 Geographic Information SystemsCo-requisite: LAW1101 orLAW1500 or ENG2002 or
11LAW2107 Environmental Law*
REN1201 or (Students enrolled in BEDU (Legal Studies) or BLAW or LLBP orBALW or BBLA or BCLA orBCLW & Co-requisiteLAW1201 or LAW1111) or(Students enrolled in DJUR& Co-requisite LAW5501 orLAW5111)Pre-requisite: MAT1102 orENM1600 or equivalent or
22MAT2200 Operations Research 1
approval from the examiner.Enrolment is not permitted inMAT2200 if MAT1200 hasbeen previously completed.
22URP3201 Sustainable Urban Design and Development11SVY3202 Photogrammetry and Remote Sensing11URP1001 Introduction to Urban and Regional Planning
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208157© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
FootnotesThe residential school for this course may involve overnight field trips for which each student will be responsible for their own accommodationcosts.
^
The semester 3 offering of this course is offered in odd numbered years only.†CHE1110 and CHE2120 have a highly recommended residential school component in external mode.~The semester 3 offering of this course is offered in even numbered years only.‡On-campus mode at Springfield only.*
Instrumentation Control and Automation Engineering major full-time recommendedenrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles11ELE1301 Computer Engineering11ELE1502 Electronic Circuits1,21,2ENG1002 Introduction to Engineering and Built
Environment Applications1,21,2ENG1100 Introduction to Engineering Design1,2,31,2MEC1201 Engineering Materials
Pre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,32ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
Practice Courses Year 1
M2,31,2ENG1901 Engineering Practice 1C32ELE1911 Electrical and Electronic Practice A
Academic Courses Year 2
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR
11ELE2303 Embedded Systems Design1,2,31,2ENG2002 Technology, Sustainability and Society11Approved Course (Select from minor or approved course
list)Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208158© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
22ELE2103 Linear Systems and ControlPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCENPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS
Practice Courses Year 2
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M31ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
M22ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Academic Courses Year 3
1515MEC3107 Thermofluids*
1,31ENG3003 Engineering Management†
Pre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METC
1ELE4109 Measurement Science and Instrument
Engineering>
Pre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Programs: GCEN or METC or MENSor MEPRPre-requisite: ELE2103 or(MEC1501 and ELE2101 asCo-requisite or Pre-requisite)
2MEC2501 Process Control Systems
Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
22ENG4110 Engineering Research Methodology
Practice Courses Year 3
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M31ELE3914 Electrical and Electronic Practice D
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208159© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students must be enrolled inone of the following Programs: MENS or MEPR
M2MEC3905 Mechatronic PracticeM2ENG3902 Professional Practice 1
Academic Courses Year 4
11MEC4108 Advanced Thermofluids**
11Approved Course (Select from minor or approved courselist)
Pre-requisite: (ELE2101 orELE2103) and ELE3105 and
1ELE4506 Industrial Process Automation
MEC2501 or Students mustbe enrolled in the followingprogram: MENS or MEPRPre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
22Approved Course (Select from minor or approved courselist)
22Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG411121,2ENG4112 Research Project Part 2
Practice Courses Year 4
Pre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
Pre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETCPre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METC
22ELE3107 Signal Processing11ELE3305 Computer Systems and Communications
ProtocolsPre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208160© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ELE1801 or Students must be enrolled inthe following Program: GCEN
1ELE3804 Power Systems Protection
Pre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: (ELE2504 andELE2601) or Students must
22ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPR
1,21,2CSC1401 Foundation ProgrammingPre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
2,32,3ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCENPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
22MEC3204 Production Engineering
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208161© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPRPre-requisite: MEC3107 orMEC3102 or Students must
2MEC5105 Combustion>
be enrolled in the followingProgram: MEPR
HR11CHE1110 Chemistry 1^
FootnotesMEC3107 Thermofluids will be offered for the first time in 2020. Students should enrol in MEC3102 Fluid Mechanics instead of MEC3107Thermofluids if they have completed the prerequisite courses MEC2101 Thermodynamics AND (ENM2600 Advanced Engineering MathematicsOR MAT2500 ).
*
The semester 3 offering of this course is offered in odd numbered years only.†Offered Odd Years Only>MEC4108 Advanced Thermofluids will be offered for the first time in 2021. Students should enrol in MEC4103 Heat Transfer instead ofMEC4108 Advanced Thermofluids if they have completed the prerequisite course MEC3102 Fluid Mechanics.
**
The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^
Instrumentation Control and Automation Engineering major part-time recommendedenrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211,21ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211,21ENM1600 Engineering Mathematics1,211,21ENG1100 Introduction to Engineering Design1,2111ENG1004 Engineering Problem Solving Principles
Practice Courses Year 1
M2,311,21ENG1901 Engineering Practice 1
Academic Courses Year 2
1212ELE1301 Computer Engineering
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208162© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
1212ELE1502 Electronic Circuits1,2,321,22MEC1201 Engineering Materials
Pre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,3222ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
Practice Courses Year 2
C3222ELE1911 Electrical and Electronic Practice A
Academic Courses Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
1313ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR
1313ELE2303 Embedded Systems DesignPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
2323ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
2323ELE2103 Linear Systems and Control
Practice Courses Year 3
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M3313ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
Academic Courses Year 4
1,2,341,24ENG2002 Technology, Sustainability and Society1414Approved Course (Select from minor or approved course
list)Pre-requisite: ELE1502 or Students must be enrolled in
2424ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCENPre-requisite: CIV1500 orCIV1501 or Students must be
2424MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS
Practice Courses Year 4
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M2424ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208163© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 5
1515MEC3107 Thermofluids*
1,3515ENG3003 Engineering Management†
Pre-requisite: ELE1301 or Students must be enrolled in
2525ELE3307 Real Time Systems
one of the following Programs: GCEN or METC or MENSor MEPR
2525Approved Course (Select from minor or approved courselist)
Practice Courses Year 5
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M3515ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
Academic Courses Year 6
Pre-requisite: ELE2103 or Students must be enrolled in
1616ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METC
16ELE4109 Measurement Science and Instrument
Engineering>
Pre-requisite: ELE2103 or(MEC1501 and ELE2101 asCo-requisite or Pre-requisite)
26MEC2501 Process Control Systems
Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
2626ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
Practice Courses Year 6
M26MEC3905 Mechatronic Practice
Academic Courses Year 7
1717MEC4108 Advanced Thermofluids**
1717Approved Course (Select from minor or approved courselist)
2727ENG4110 Engineering Research MethodologyPre-requisite: MEC2401 orELE2103 or Students must
2727MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCEN
Practice Courses Year 7
M27ENG3902 Professional Practice 1
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208164© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 8
Pre-requisite: (ELE2101 orELE2103) and ELE3105 and
18ELE4506 Industrial Process Automation
MEC2501 or Students mustbe enrolled in the followingprogram: MENS or MEPRPre-requisite: ENG3902 andENG4110
1818ENG4111 Research Project Part 1
Pre-requisite: ENG41112828ENG4112 Research Project Part 22828Approved Course (Select from minor or approved course
list)
Practice Courses Year 8
Pre-requisite: ENG3902. Students cannot enrol in
M2818ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,38ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
Pre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETCPre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METC
22ELE3107 Signal Processing11ELE3305 Computer Systems and Communications
ProtocolsPre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ELE1801 or Students must be enrolled inthe following Program: GCEN
1ELE3804 Power Systems Protection
Pre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENSPre-requisite: (ELE2504 andELE2601) or Students must
22ELE4606 Communication Systems
be enrolled in one of the following Programs: GCEN orMETC or MEPR or MENS orGCNS or GDNSPre-requisite: ELE1301 or Students must be enrolled in
11ELE4607 Advanced Digital Communications
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208165© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Instrumentation Control and Automation Engineering (Major Study Code: 17741)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
one of the following Programs: GCEN or METC or GCNSor GDNS or MENS or MEPRPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPR
1,21,2CSC1401 Foundation ProgrammingPre-requisite: CSC1401 orStudents must be enrolled in
11CSC2402 Object-Oriented Programming in C++
one of the following Programs: GDTI or GCSC or GCENor METC or MCOT or MCTEor MCOP or MPIT or MCTN
2,32,3ENG4004 Engineering Project and Operations
Management‡
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCENPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
22MEC3204 Production EngineeringPre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPRPre-requisite: MEC3107 orMEC3102 or Students must
2MEC5105 Combustion>
be enrolled in the followingProgram: MEPR
HR11CHE1110 Chemistry 1^
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208166© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
FootnotesMEC3107 Thermofluids will be offered for the first time in 2020. Students should enrol in MEC3102 Fluid Mechanics instead of MEC3107Thermofluids if they have completed the prerequisite courses MEC2101 Thermodynamics AND (ENM2600 Advanced Engineering MathematicsOR MAT2500 ).
*
The semester 3 offering of this course is offered in odd numbered years only.†Offered Odd Years Only>MEC4108 Advanced Thermofluids will be offered for the first time in 2021. Students should enrol in MEC4103 Heat Transfer instead ofMEC4108 Advanced Thermofluids if they have completed the prerequisite course MEC3102 Fluid Mechanics.
**
The semester 3 offering of this course is offered in even numbered years only.‡CHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^
Mechanical Engineering major full-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the link inthe table below to ascertain if a course is offered in another term.
Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
Academic Courses
1,211ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,211ENG1100 Introduction to Engineering Design
Practice Courses
M2,31,21ENG1901 Engineering Practice 1
Academic Courses
1,2,321MEC1201 Engineering MaterialsPre-requisite: ENM1600221MEC2406 Introduction to Mechatronics and AutomationPre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,321CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
221MEC2304 Solid Modelling
Year 2
Academic Courses
1,2,312ENG2002 Technology, Sustainability and SocietyPre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Program
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208167© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
1412MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS
Practice Courses
M312MEC2901 Mechanical Practice 1M112MEC2902 Mechanical Practice 2
Academic Courses
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,322ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCENPre-requisite: CIV1500 orCIV1501 or Students must be
222MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENSPre-requisite: MEC2402 orStudents must be enrolled in
222MEC2301 Design of Machine Elements
one of the following Programs: MEPR or GCEN
Year 3
Academic Courses
Pre-requisite: MEC1201 orStudents must be enrolled in
113MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: MEC1201 orStudents must be enrolled in
113MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCEN
113MEC3107 Thermofluids*
Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or
113MEC3302 Computational Mechanics in Design
Students must be enrolled inone of the following Program
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208168© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MEPRor GCNS or GDNS or MENS
223MEC3204 Production EngineeringPre-requisite: MEC2301 orStudents must be enrolled in
223MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or
223MEC3403 Dynamics II
Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNS
223ENG4110 Engineering Research Methodology
Practice Courses
M323MEC3903 Mechanical Practice 3<
M2ENG3902 Professional Practice 1
Year 4
Academic Courses
114MEC4108 Advanced Thermofluids**
1,314ENG3003 Engineering Management†
Pre-requisite: ENG3902 andENG4110
114ENG4111 Research Project Part 1
1,2,314Approved Course (Select from approved course list)
Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M214ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Academic Courses
1,2,324Approved Course (Select from approved course list)Pre-requisite: ((MEC2101andMEC3102) or MEC2106)
224MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: ENG4111224ENG4112 Research Project Part 2
1,2,324Approved Courses (Select from approved course list)
Practice Courses
Pre-requisite: MEC3102 orMEC2106 or Students must
M224MEC3904 Mechanical Practice 4
be enrolled in one of the following Programs: GDNS orMENS or MEPR
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208169© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCENPre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPRPre-requisite: MEC3107 orMEC3102 or Students must
2MEC5105 Combustion>
be enrolled in the followingProgram: MEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in the following: GCENPre-requisite: CIV3506 or(MEC2402 and MEC3203)
1CIV4803 Mechanics and Technology of FibreComposites
11ELE1502 Electronic Circuits22ELE2103 Linear Systems and Control11ELE2303 Embedded Systems Design
Pre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
2,32ENG4004 Engineering Project and Operations
Management‡
FootnotesMEC3107 Thermofluids will be offered for the first time in 2020. Students should enrol in MEC3102 Fluid Mechanics instead of MEC3107Thermofluids if they have completed the prerequisite courses MEC2101 Thermodynamics AND (ENM2600 Advanced Engineering MathematicsOR MAT2500 ).
*
MEC3903 Mechanical Practice 3 will not be offered on-campus at Springfield in 2019.<MEC4108 Advanced Thermofluids will be offered for the first time in 2021. Students should enrol in MEC4103 Heat Transfer instead ofMEC4108 Advanced Thermofluids if they have completed the prerequisite course MEC3102 Fluid Mechanics.
**
The semester 3 offering of this course is offered in odd numbered years only.†Offered Odd Years Only. Students who intend to take this course in Year 3 should enrol in MEC3204 Production Engineering in Year 4.>Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@The semester 3 offering of this course is offered in even numbered years only.‡
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208170© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Mechanical Engineering major part-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
Academic Courses
1,21,2ENG1002 Introduction to Engineering and BuiltEnvironment Applications
1,21,2ENM1600 Engineering Mathematics1,2,31,2MEC1201 Engineering Materials
Pre-requisite: ENM160022MEC2406 Introduction to Mechatronics and Automation
Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 2
Academic Courses
1,21ENG1004 Engineering Problem Solving Principles1,21,2ENG1100 Introduction to Engineering Design
Pre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
22MEC2304 Solid Modelling
Year 3
Academic Courses
1,2,31,2ENG2002 Technology, Sustainability and SocietyPre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,32ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208171© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses
M31MEC2901 Mechanical Practice 1
Year 4
Academic Courses
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENSPre-requisite: MEC2402 orStudents must be enrolled in
22MEC2301 Design of Machine Elements
one of the following Programs: MEPR or GCEN
Practice Courses
M11MEC2902 Mechanical Practice 2
Year 5
Academic Courses
Pre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCEN
22MEC3204 Production EngineeringPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
Practice Courses
M32MEC3903 Mechanical Practice 3<
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208172© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 6
Academic Courses
11MEC3107 Thermofluids*
Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or
11MEC3302 Computational Mechanics in Design
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or
22MEC3403 Dynamics II
Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNS
1,2,32Approved Course (Select from approved course list)
Practice Courses
Pre-requisite: MEC3102 orMEC2106 or Students must
M22MEC3904 Mechanical Practice 4
be enrolled in one of the following Programs: GDNS orMENS or MEPR
Year 7
Academic Courses
11MEC4108 Advanced Thermofluids**
1,31ENG3003 Engineering Management†
Pre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPR
22ENG4110 Engineering Research Methodology
Practice Courses
M2ENG3902 Professional Practice 1
Year 8
Academic Courses
Pre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
1,2,31Approved Course (Select from approved course list)
Practice Courses
1,2,3ENG4909 Work Experience - Professional
Academic Courses
Pre-requisite: ENG41111,21,2ENG4112 Research Project Part 21,2,32Approved Courses (Select from approved course list)
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208173© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechanical Engineering (Major Study Code: 16928)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
Select approved courses from the following or other elective courses as approved by the ProgramCoordinator
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCENPre-requisite: MEC3107 orMEC3102 or ENV3104 or S
1MEC5100 Computational Fluid Dynamics
tudents must be enrolled inthe following Program: MEPRPre-requisite: MEC3107 orMEC3102 or Students must
2MEC5105 Combustion>
be enrolled in the followingProgram: MEPRPre-requisite: (ENG1100 andMEC2402) or (ENG1100 and
22CIV2503 Structural Design I
CIV1501 for students enrolledin one of the following: BETCInfrastructure Managementmajor or BENS InfrastructureManagement Engineeringmajor) or Students must beenrolled in the following: GCENPre-requisite: CIV3506 or(MEC2402 and MEC3203)
1CIV4803 Mechanics and Technology of FibreComposites
11ELE1502 Electronic Circuits22ELE2103 Linear Systems and Control11ELE2303 Embedded Systems Design
Pre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCPre-requisite: ENV2105 orStudents must be enrolled in
11ENV4204 Environmental Technology@
one of the following Programs: PDEV or GCEN or METCor MEPR or GCNS or GDNSor MENS
2,32ENG4004 Engineering Project and Operations
Management‡
FootnotesMEC3903 Mechanical Practice 3 will not be offered on-campus at Springfield in 2019.<MEC3107 Thermofluids will be offered for the first time in 2020. Students should enrol in MEC3102 Fluid Mechanics instead of MEC3107Thermofluids if they have completed the prerequisite courses MEC2101 Thermodynamics AND (ENM2600 Advanced Engineering MathematicsOR MAT2500 ).
*
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208174© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
MEC4108 Advanced Thermofluids will be offered for the first time in 2021. Students should enrol in MEC4103 Heat Transfer instead ofMEC4108 Advanced Thermofluids if they have completed the prerequisite course MEC3102 Fluid Mechanics.
**
The semester 3 offering of this course is offered in odd numbered years only.†Offered Odd Years Only.>Students who wish to enrol in ENV4204 Environmental Technology as an Approved course, should consult their Program Coordinator.@The semester 3 offering of this course is offered in even numbered years only.‡
Mechatronic Engineering major full-time recommended enrolment pattern (Toowoombaand Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus. Students following a non-standard enrolment pattern should click on the courselink in the table below to ascertain if a course is offered in another term.
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
Academic Courses
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles1,211ENG1100 Introduction to Engineering Design111ELE1301 Computer Engineering
Practice Courses
M2,31,21ENG1901 Engineering Practice 1
Academic Courses
1,221ENG1002 Introduction to Engineering and BuiltEnvironment Applications
Pre-requisite: ENM1600221MEC2406 Introduction to Mechatronics and AutomationPre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,321CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
221MEC2304 Solid Modelling
Year 2
Academic Courses
1,2,312MEC1201 Engineering MaterialsPre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: CIV1501 or Students must be enrolled in
112MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208175© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
112MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENS
Practice Courses
M312MEC2901 Mechanical Practice 1M112MEC2902 Mechanical Practice 2
Academic Courses
Pre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,322ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCENPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: MEC2402 orStudents must be enrolled in
222MEC2301 Design of Machine Elements
one of the following Programs: MEPR or GCEN
222ELE2103 Linear Systems and Control
Practice Courses
322ELE1911 Electrical and Electronic Practice A
Year 3
Academic Courses
113ELE1502 Electronic Circuits1,2,313ENG2002 Technology, Sustainability and Society
Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or
113MEC3302 Computational Mechanics in Design
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
113ELE2303 Embedded Systems DesignPre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or
223MEC3403 Dynamics II
Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNSPre-requisite: MEC2301 orStudents must be enrolled in
223MEC3303 Mechanical and Mechatronic System Design
one of the following Program
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208176© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or GCNSor GDNS or MEPR or MENSPre-requisite: ELE1502 or Students must be enrolled in
223ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN
223ENG4110 Engineering Research Methodology
Practice Courses
M2MEC3905 Mechatronic Practice^
M2ENG3902 Professional Practice 1
Year 4
Academic Courses
Pre-requisite: MEC1201 orStudents must be enrolled in
114MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: ELE2103 or Students must be enrolled in
114ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METC
1,314ENG3003 Engineering ManagementPre-requisite: ENG3902 andENG4110
114ENG4111 Research Project Part 1
Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M214ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Academic Courses
1,2,324Approved Course (Select from approved course list)Pre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
224ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) orStudents must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENSPre-requisite: MEC2401 orELE2103 or Students must
224MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCENPre-requisite: ENG4111224ENG4112 Research Project Part 2
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208177© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Select one (1) approved course from the following or other elective course as approved by the ProgramCoordinator
2,32ENG4004 Engineering Project and Operations
Management‡
11ELE3305 Computer Systems and CommunicationsProtocols
Pre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
22MEC3204 Production EngineeringPre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPR
FootnotesOn-campus students should enrol in the external mode.^The semester 3 offering of this course is offered in even numbered years only.‡
Mechatronic Engineering major part-time recommended enrolment pattern(Toowoomba and Springfield campus)Students are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
Academic Courses
1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles1,21,2ENG1002 Introduction to Engineering and Built
Environment ApplicationsPre-requisite: ENM160022MEC2406 Introduction to Mechatronics and Automation
Year 2
Academic Courses
1,21,2ENG1100 Introduction to Engineering Design
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208178© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
11ELE1301 Computer EngineeringPre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCEN
22MEC2304 Solid Modelling
Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 3
Academic Courses
1,2,31,2MEC1201 Engineering MaterialsPre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPRPre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,32ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCENPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENS
Year 4
Academic Courses
Pre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: MEC2402 orStudents must be enrolled in
22MEC2301 Design of Machine Elements
one of the following Programs: MEPR or GCEN
22ELE2103 Linear Systems and Control
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208179© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses
M31MEC2901 Mechanical Practice 1M11MEC2902 Mechanical Practice 2
32ELE1911 Electrical and Electronic Practice A
Year 5
Academic Courses
11ELE1502 Electronic Circuits1,2,31,2ENG2002 Technology, Sustainability and Society
Pre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or
22MEC3403 Dynamics II
Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNSPre-requisite: MEC2301 orStudents must be enrolled in
22MEC3303 Mechanical and Mechatronic System Design
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
Year 6
Pre-requisite: (MEC2304 andMEC2401 and MEC2402) or
11MEC3302 Computational Mechanics in Design
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENS
11ELE2303 Embedded Systems DesignPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN
Approved Course (Select from approved course list)
Practice Courses
M2MEC3905 Mechatronic Practice^
Year 7
Academic Courses
Pre-requisite: MEC1201 orStudents must be enrolled in
11MEC2202 Manufacturing Processes
one of the following Programs: MEPR or GCENPre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCPre-requisite: (ELE1502 and(ELE2101 or ELE2103) and
22ELE3506 Electronic Measurement
(ELE2503 or ELE2504)) or
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208180© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Students must be enrolled inone of the following Programs: GCEN or METC or MEPRor MENS
22ENG4110 Engineering Research Methodology
Practice Courses
M2ENG3902 Professional Practice 1
Year 8
Academic Courses
1,31ENG3003 Engineering ManagementPre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
Practice Courses
1,2,3ENG4909 Work Experience - Professional
Academic Courses
Pre-requisite: MEC2401 orELE2103 or Students must
22MEC4406 Robotics and Machine Vision
be enrolled in one of the following Programs: MENS orGCENPre-requisite: ENG411122ENG4112 Research Project Part 2
Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
Select one (1) approved course from the following or other elective course as approved by the ProgramCoordinator
2,32ENG4004 Engineering Project and Operations
Management‡
11ELE3305 Computer Systems and CommunicationsProtocols
Pre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENSPre-requisite: MEC1201 orStudents must be enrolled in
11MEC3203 Materials Technology
one of the following Programs: GCEN or METC or GCNSor GDNS or MEPR or MENS
22MEC3204 Production EngineeringPre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS or
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208181© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Mechatronic Engineering (Major Study Code: 16929)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
GDNS or METC or MENS orMEPR
FootnotesOn-campus students should enrol in the external mode.^The semester 3 offering of this course is offered in even numbered years only.‡
Power Engineering major full-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
To satisfy the requirements of the program students must complete all of the Academic and Practice coursesin the following table that shows the recommended enrolment patterns for on-campus and external studentsfor our Toowoomba campus.
Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Academic Courses Year 1
1,211ENM1600 Engineering Mathematics1,211ENG1004 Engineering Problem Solving Principles111ELE1301 Computer Engineering111ELE1502 Electronic Circuits1,221ENG1002 Introduction to Engineering and Built
Environment Applications1,221ENG1100 Introduction to Engineering Design
Pre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,321ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
1,2,321MEC1201 Engineering Materials
Practice Courses Year 1
M2,31,21ENG1901 Engineering Practice 1M321ELE1911 Electrical and Electronic Practice A
Academic Courses Year 2
Pre-requisite: ENM1600 orStudents must be enrolled in
112ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR
112ELE2303 Embedded Systems Design1,2,312ENG2002 Technology, Sustainability and Society112Approved Course (Select from minor or approved course
list)Pre-requisite: ELE1502 or Students must be enrolled in
222ELE2504 Electronic Design and Analysis
one of the following Program
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208182© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: MEPR or GDNS or MENSor GCNS or GCEN
222ELE2103 Linear Systems and ControlPre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
222ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: CIV1500 orCIV1501 or Students must be
222MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS
Practice Courses Year 2
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M312ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENSPre-requisite: (ELE1301 andELE1502 and ELE1801) or
M222ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Academic Courses Year 3
Pre-requisite: ELE1801 or Students must be enrolled in
113ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ELE2103 or Students must be enrolled in
113ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METC
1,313ENG3003 Engineering Management113ELE3305 Computer Systems and Communications
ProtocolsPre-requisite: (ELE1502 andELE1801) or Students must
223ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
223Approved Course (Select from minor or approved courselist)
223Approved Course (Select from minor or approved courselist)
223ENG4110 Engineering Research Methodology
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208183© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Practice Courses Year 3
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M313ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPRPre-requisite: ELE1801 andELE1301 and ELE1502 or S
M223ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPR
M2ENG3902 Professional Practice 1
Academic Courses Year 4
114ELE3807 Power Systems AnalysisPre-requisite: ELE1801 or Students must be enrolled inthe following Program: GCEN
1ELE3804 Power Systems Protection
Pre-requisite: ENG3902 andENG4110
114ENG4111 Research Project Part 1
114Approved Course (Select from minor or approved courselist)
Pre-requisite: ELE1801 or Students must be enrolled in
224ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METCPre-requisite: ((MEC2101andMEC3102) or MEC2106)
224MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPRPre-requisite: ENG41112824ENG4112 Research Project Part 2
2,324Approved Course (Select from minor or approved courselist)
Practice Courses Year 4
Pre-requisite: ENG3902. Students cannot enrol in
M214ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
Pre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC
22ELE3107 Signal ProcessingPre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Program
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208184© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MENSor MEPRPre-requisite: (ELE2101 orELE2103) and ELE3105 and
1ELE4506 Industrial Process Automation
MEC2501 or Students mustbe enrolled in the followingprogram: MENS or MEPRPre-requisite: {(MAT1502 orENM1600) and ELE2103 and
11ELE4605 Fields and Waves
ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNSPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPRPre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN
11CIV2605 Construction Engineering22GIS1401 Geographic Data Presentation1,31GIS1402 Geographic Information Systems2,32ENG4004 Engineering Project and Operations
ManagementPre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCENPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ELE2103 or(MEC1501 and ELE2101 asCo-requisite or Pre-requisite)
2MEC2501 Process Control Systems
Pre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or
22MEC3403 Dynamics II
Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNS
HR11CHE1110 Chemistry 1^
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208185© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
FootnotesCHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^
Power Engineering major part-time recommended enrolment patternStudents are able to enrol in any offered mode of a course (on-campus, external or online), regardless of theprogram mode of study they enrolled in.
Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Year 1
1,21,2ENM1600 Engineering Mathematics1,21ENG1004 Engineering Problem Solving Principles1,21,2ENG1002 Introduction to Engineering and Built
Environment Applications1,21,2ENG1100 Introduction to Engineering Design
Year 1 Practice Courses
M2,31,2ENG1901 Engineering Practice 1
Year 2
11ELE1301 Computer Engineering11ELE1502 Electronic Circuits
Pre-requisite: ENG1500 orMAT1500 or ENM1500 or
2,32ELE1801 Electrical Technology
ENM1600 or Students mustbe enrolled in one of the following Programs: MEPR orGCEN
1,2,31,2MEC1201 Engineering Materials
Year 2 Practice Courses
M32ELE1911 Electrical and Electronic Practice A
Year 3
Pre-requisite: ENM1600 orStudents must be enrolled in
11ENM2600 Advanced Engineering Mathematics
one of the following Programs: GCEN or METC or MENSor GDNS or MEPR
11ELE2303 Embedded Systems DesignPre-requisite: ELE1502 or Students must be enrolled in
22ELE2504 Electronic Design and Analysis
one of the following Programs: MEPR or GDNS or MENSor GCNS or GCEN
22ELE2103 Linear Systems and Control
Year 3 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M31ELE2912 Electrical and Electronic Practice B
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 4
1,2,31,2ENG2002 Technology, Sustainability and Society
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208186© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Approved Course (Select from minor or approved courselist)
Pre-requisite: (ENM2600 orMAT2100 or MAT2500) or S
22ENG3104 Engineering Simulations and Computations
tudents must be enrolled inone of the following Programs: GCEN or GDET or METCor MEPR or GCNS or GDNSor MENSPre-requisite: CIV1500 orCIV1501 or Students must be
22MEC2106 Introduction to Thermofluids
enrolled in one of the following Programs: BENH or BEBC or BEHS or GCEN orMENS
Year 4 Practice Courses
Pre-requisite: (ELE1301 andELE1502 and ELE1801) or
M22ELE2913 Electrical and Electronic Practice C
Students must be enrolled inone of the following Programs: GDNS or MENS
Year 5
Pre-requisite: ELE1801 or Students must be enrolled in
11ELE3803 Electrical Plant
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ELE2103 or Students must be enrolled in
11ELE3105 Computer Controlled Systems
one of the following Programs: GCNS or GCEN or GDNSor MEPR or MENS or METCPre-requisite: (ELE1502 andELE1801) or Students must
22ELE3805 Power Electronics Principles and Applications
be enrolled in one of the following Programs: GCEN orMETC or MEPR or GCNS orGDNS or MENS
1,2,32Approved Course (Select from minor or approved courselist)
Year 5 Practice Courses
Pre-requisite: (ELE1801 andELE1301 and ELE1502) or
M31ELE3914 Electrical and Electronic Practice D
Students must be enrolled inone of the following Programs: MENS or MEPR
Year 6
1,31ENG3003 Engineering Management11ELE3305 Computer Systems and Communications
Protocols1,2,32Approved Course (Select from minor or approved course
list)
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208187© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
Pre-requisite: ELE1801 or Students must be enrolled in
22ELE2704 Electricity Supply Systems
one of the following Programs: MEPR or GCEN or METC
Year 6 Practice Courses
Pre-requisite: ELE1801 andELE1301 and ELE1502 or S
M22ELE3915 Electrical and Electronic Practice E
tudents must be enrolled inone of the following Programs: MENS or MEPR
Year 7
11ELE3807 Power Systems AnalysisPre-requisite: ELE1801 or Students must be enrolled inthe following Program: GCEN
1ELE3804 Power Systems Protection
22ENG4110 Engineering Research MethodologyPre-requisite: ((MEC2101andMEC3102) or MEC2106)
22MEC4104 Renewable Energy Technology
or Students must be enrolledin one of the following Programs: GCEN or GCNS orGDNS or METC or MENS orMEPR
Year 7 Practice Courses
M2ENG3902 Professional Practice 1
Year 8
Pre-requisite: ENG3902 andENG4110
11ENG4111 Research Project Part 1
Approved Course (Select from minor or approved courselist)
Pre-requisite: ENG41111,281,2ENG4112 Research Project Part 2Approved Course (Select from minor or approved courselist)
Year 8 Practice Courses
Pre-requisite: ENG3902. Students cannot enrol in
M21ENG4903 Professional Practice 2
ENG3902 and ENG4903 inthe same semester.
1,2,3ENG4909 Work Experience - Professional
Select a minor study or approved courses from the following or other elective courses as approved bythe Program Coordinator
Pre-requisite: (ELE1502 andELE1801) or Students must
11ELE2601 Telecommunications Principles
be enrolled in one of the following Programs: GCEN orMETC
22ELE3107 Signal ProcessingPre-requisite: ELE1301 or Students must be enrolled in
22ELE3307 Real Time Systems
one of the following Program
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208188© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
Major study: Power Engineering (Major Study Code:16930)Enrolment requirementsResidential
schoolYear of program and semester in which course
is normally studiedCourse
Online(ONL)
External(EXT)
On-campus(ONC)
SemYearSemYearSemYear
s: GCEN or METC or MENSor MEPRPre-requisite: (ELE2101 orELE2103) and ELE3105 and
1ELE4506 Industrial Process Automation
MEC2501 or Students mustbe enrolled in the followingprogram: MENS or MEPRPre-requisite: {(MAT1502 orENM1600) and ELE2103 and
11ELE4605 Fields and Waves
ELE2601} or Students mustbe enrolled in one of the following Programs: MEPR orMENS or GCNS or GDNSPre-requisite: ELE2601 or Students must be enrolled in
11ELE5001 Industrial Communications Protocols
the following Program: GCNS, GDNS, MENS or MEPRPre-requisite: CIV1501 orCIV1500 or Students must be
22CIV2403 Geology and Geomechanics
enrolled in one of the following Programs: MENS or GCEN
11CIV2605 Construction Engineering22GIS1401 Geographic Data Presentation1,31GIS1402 Geographic Information Systems2,32ENG4004 Engineering Project and Operations
ManagementPre-requisite: ENG1500 orMAT1500 or ENM1600 or
2,32CIV1501 Engineering Statics
(ENM1500 and CIV1500) orStudents must be enrolled inone of the following Programs: MEPR or GCENPre-requisite: ((MAT1502 orMAT1102 or ENM1600) and
11MEC2401 Dynamics I
CIV1501) or Students mustbe enrolled in one of the following Programs: GCEN orGCNS or METC or MEPR orMENSPre-requisite: CIV1501 or Students must be enrolled in
11MEC2402 Stress Analysis
one of the following Programs: GCEN or METC or MEPRor GCNS or GDNS or MENSPre-requisite: ELE2103 or(MEC1501 and ELE2101 asCo-requisite or Pre-requisite)
2MEC2501 Process Control Systems
Pre-requisite: (MEC2401 and(MAT2500 or ENM2600)) or
22MEC3403 Dynamics II
Students must be enrolled inone of the following Programs: GCEN or MEPR or GCNSor GDNS
HR11CHE1110 Chemistry 1^
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208189© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)
FootnotesCHE1110 Chemistry 1 has a highly recommended residential school requirement in External mode.^
This version produced 12 Dec 2019.CRICOS: QLD 00244B, NSW 02225M | TEQSA: PRV1208190© University of Southern Queensland
Consult the Handbook on the Web at http://www.usq.edu.au/handbook/current for any updates that may occur during the year.Bachelor of Engineering (Honours) (BENH) - BEng(Hons) (2019)