axisvm user manual
DESCRIPTION
Uputstvo za korišćenje softveraTRANSCRIPT
1031 Budapest, Hungary www.graphisoft.com
ArchiCAD 11 - AxisVM 8 I/O
Workflow:
o The architect creates the model of the building structure in ArchiCAD®. The load-bearing structures can be modeled using the beam, column, slab and wall tools.
o Then the model is exported via the IFC 2x2 format into AxisVM 8. o In AxisVM®, the structural engineer makes the necessary modifications and additions on
the structural model and performs the required structural analysis on it.o The architectural documentation is created from the original model in ArchiCADo The structural engineer creates the structural documentation based on the structural
model in AxisVM.
AxisVMmodel
ArchiCAD model
IFC
2x2
1031 Budapest, Hungary www.graphisoft.com
The I/O Process:
To use exchange data, you have to do the following:1. Download the latest version of Graphisoft’s IFC 2x2 from
http://www.graphisoft.com/support/ifc/downloads/public/, and uncompress it.2. Install the add-on into your ArchiCAD 11 (Add-Ons Folder) when the ArchiCAD is not
running by double-clicking on the uncompressed icon.3. Start your ArchiCAD and assemble the structure you would like.
4. From the ArchiCAD Floor Plan view, choose save as IFC 2x2.
1031 Budapest, Hungary www.graphisoft.com
5. Do not forget to have the following configuration on the Export tab page:
6. Start your AxisVM 8, select the Import menu and open the IFC file:
1031 Budapest, Hungary www.graphisoft.com
7. Select the icon on the Element tab to convert the architectural model to a structural model. Click on the ‘Create Model Framework’ button in the dialog window:
8. Use the ‘Selection palette’ to select the architectural objects for conversion. The AxisVM can convert and analyze the whole structure or a part of it (for example: the user can select a story to analyze it as plate model.)
1031 Budapest, Hungary www.graphisoft.com
9. Assign the material properties and set the parameters of objects.The AxisVM can convert the following architectural objects:
- plates, walls, columns, beams, roofs
10. Define the support conditions and apply the loads to the structural model.
11. Run the linear static, non-linear static or dynamic analysis.