axiomatic design theory
DESCRIPTION
Axiomatic Design Theory. What is axiom? is known to be true by understanding its meaning without proof. a starting point for deducing and inferring other (theory dependent) truths. - PowerPoint PPT PresentationTRANSCRIPT
1
Axiomatic Design Theory
What is axiom?– is known to be true by understanding its
meaning without proof. – a starting point for deducing and inferring
other (theory dependent) truths.
Axiomatic design theory: it is a design theory that has been verified by numerous applications. In other words, it is true (starting point) and accepted by engineers without proof.
2
Axiomatic Design Theory
Axiom 1: Independence Axiom
Axiom 2: Information Content
3
Axiomatic Design Theory(Axiom 1)
4
Axiom 1 – Design example
Hold hot water
Requirement:
hold hot (~100oC) water with hand
Grasp the holder
Hold water without consideration of
temperature
Resist heat conduction
5
Isolating material
Grasp the holder
Hold water without consideration of
temperature
Resist heat conduction
DPDP
DP
6
Axiom 1
The better design meets:
Design or function requirement (FR) should be independent or uncoupled on their own right
Design parameters (DP) should maintain the FR independent – i.e., not making FR coupled
7
2
1
220
011
2
1
DP
DP
A
A
FR
FR
8
2
1
2221
1211
2
1
DP
DP
AA
AA
FR
FR
2
1
2221
11
2
1
DP
DP
AA
A
FR
FR
2
1
22
11
2
1
DP
DP
A
A
FR
FRUncoupled
Coupled
Decoupled
To satisfy the independence axiom, the design matrix must be either diagonal or triangular
(Diagonal matrix)
(Full matrix)
(Triangular matrix)
9
Example – Axiom 1
Hinge
FR1=Provide access to items stored in the refrigerator
FR2=Minimize energy loss
10
Hinge
FR1=Provide access to items stored in the refrigerator
FR2=Minimize energy loss
S1=Vertically hung door
S2=Thermal insulation material in the door
S1’=Horizontally hung door
11
2
1
2221
11
2
1
DP
DP
AA
A
FR
FR
Hinge
2
1
22
11
2
1
DP
DP
A
A
FR
FR
Decoupled Uncoupled
The cold air stays inside when the door is opened
12
12 FRs:Contain axial pressure,Withstand a moderate impact when the can is dropped,Provide easy access to liquid, etc.
Physical pieces: Just 3(the body, the lid, the opener tab)
DPs: 12 The thickness of the can bodyThe curvature at the bottom of the can etc.
Axiom 1 is focusing upon Functional independence but not physical independence
13
Physical integrationPhysical integration
Notion: logical and physical
OneFR1/DP1
FR2/DP2
FR and DP in ADT refer to the logical level
14
Solution principle 1 for opening type 1 of lid At the conceptual design phase
Solution principle 2 for opening type 2 of lid At the conceptual design phase
The geometry of each of them refers to the embodiment design phase
Their relationship (distance, material interface) refers to the embodiment design phase
15
Decoupled DesignDecoupled Design
2
1
2221
1211
2
1
DP
DP
AA
AA
FR
FR
2
1
2221
11
2
1
DP
DP
AA
A
FR
FR
2221212
1111
DPADPAFR
DPAFR
16
Decoupled DesignDecoupled Design
2221212
1111
DPADPAFR
DPAFR
Step 1: Change DP1 to affect FR1 and FR2
Step 2: Change DP2 to affect FR2
Step 1 has also affected FR2 but in Step 2, this effect is changed back and to further affected by DP2 only
17
Axiom 1 revision
The better design meets:
Design or function requirement (FR) should be independent or uncoupled on their own right
Design parameters (DP) should maintain the FR independent – i.e., not making FR coupled
Remark: In the recent development, decoupled situation of FR will also be considered in Axiom 1, i.e., acceptable as a better design.
18
3
2
1
232221
131211
2
1
DP
DP
DP
AAA
AAA
FR
FR
Redundant design
2
1
2221
1211
2
1
DP
DP
AA
AA
FR
FR
19
Redundant designRedundant design
2222
3131111
DPAFR
DPADPAFR
3
2
1
232221
131211
2
1
DP
DP
DP
AAA
AAA
FR
FR
20
SummarySummary
1. Axiom 1 of ADT concerns coupling, decoupling, and uncoupling among functional requirements both in direct and indirect (through DP) manners.
2. Axiom 1 suggests the better design to be uncoupled or decoupled.
3. Logical design versus physical design.
4. Physical design refers to embodiment design.
5. Axiom 1 of ADT is only applicable to the conceptual design.
21
SummarySummary
6. Redundant design concept: more DP than FR.
7. It is a relative concept about coupling, decoupling and uncoupling.