awisa2012_machinery_screen

AWISA 2012

The latest technology for your future

11-14 July 2012Sydney Convention & Exhibition Centre

www.awisa.com

A preview of some of the machinery, tooling and software on display at AWISA 2012The trade show for the cabinet, joinery, furniture, timber and panel industries

Admonter Natural FlooringAdvanced Timber SystemsAirtight Solutions LtdAltendorf Asia Pacific Pty LtdArturo Salice S.p.A.ASOFIAAustedan Fabrications Pty LtdAustralian Furniture AssociationAustralian Window AssociationBeyond ToolsBiesse Group AustraliaBlum Australia Pty LtdBreton S.p.A.Cabinet Makers Association Inc.Cabinet Makers Insurance BrokersCabmaster SoftwareCamco Cutting Tools InternationalCarb-i-tool (Aust) Pty LtdCDK Stone Pty LtdComplete Software SolutionsDesigner Training Pty LtdDiamond Tooling Australia Pty LtdDimar Tools (Australia) Pty LtdDKSH Australia Pty LtdEGRElumatec AustraliaEmpower Marketing LtdEpac Productions LtdEQ Software Pty LtdEurofit Hardwares Pty LtdEzi-Duct Pty LtdFCJ AllianceFein Power Tools Pty LtdFelder NSW Pty LtdFinlease (Aust) Pty LtdFirst SuperFlecknoe Pty LtdForestry TasmaniaForm-tek Products Pty LtdFurniture Hardware SuppliesFurnishing Industry Association of AustraliaGNG SalesGreg Steele Trading Pty LtdGregory Machinery Pty LtdHafele Australia Pty LtdHalifax Vogel Group Pty LtdHarn Pty LtdHasemer Materials HandlingHawley’s Pty LtdHettich AustraliaHomag Australia Pty LtdHordern & Company Pty LtdHousing Industry AssociationHunter Plastics (Australasia) Pty LtdIdacs Pty LtdIntermic Group Pty LtdITW Finishing TechnologiesJoiners Magazine NZ

Just Stone Pty LtdKaeser Compressors Aust Pty LtdKitchen Bathroom Designers Institute Kitchen King LimitedKleiberit Adhesives AustraliaKockums Bulk Systems Pty LtdKory Dubay ManufacturingLaser & Sign TechnologyLeda Machinery Pty LtdLeitz Tooling System Pty LtdLeuco AustraliaLinbide ToolsLincoln GroupLink PlasticsLuna MachineryMagnum Engineering Pty LtdMajor Woodworking EquipmentMasterwood AustraliaMaterials Handling Pty LtdMichael Weinig Australia Pty LtdMicronairMicrovellumMillsom Hoists Pty LtdMPB Engineering Pty LtdMulticam SystemsNessco GroupNew Age Veneers Pty LtdPlanit (Solspec)PolytecPopular Machinery & ToolsPosition PartnersPytha Pty LtdQuickCAMRhino Panel Equipment Pty LtdRon Mack MachinerySchelling Anlagenbau GmbHSeradex Pty LtdSullair Australia Pty LtdSupplier MagazineSurteco AustraliaTABMATAFETesrolThatcher EngineeringThermwoodThe Wood Tech GroupThingamejig Precision ToolsTimberman MagazineTooltechnic SystemsTrademaster Joiner & Building ServicesVille-Tec Engineering & RepairsWeldline EngineeringWilson & Bradley Pty LtdWindow & Door Industry CouncilWood Machinery MaintenanceWoodbond Adhesives Pty LtdWoodcraft SuppliesWoodtron

awisa

exh

ibito

rs

List correct as at 1 May 2012

AWISA 2012, the international exhibition of machinery, materials, fittings and services for the woodworking and furniture industries, is on again in Sydney from 11-14 July this year.

Once again the show is spread over four of the halls at the Sydney Convention & Exhibition Centre and features an extraordinary range of machinery, tooling and software for panel processing and solid wood processing. This publication features just some of the products on display.

This exhibition is the must see event for everyone in woodworking and associated industries and professions. Furniture manufacturers, cabinetmakers, kitchen manufacturers, joinery manufacturers, architects, interior designers, shop and office fitters, and other wood, timber and panel processing industries are welcome to attend.

Alongside all the panel and solid wood machinery there is also a range of machinery for aluminium, stone, glass and plastic processing. The show is not just about machinery, tooling and software. The AWISA-Design area, that is presented in a separate AWISA publication available online at www.awisa.com, features hardware, components and decorative products for the cabinet, furniture, kitchen and fitout industries.

For more details about visiting the show read the inside back cover of this publication or visit www.awisa.com

ShOW hOurS

Wednesday 11 July 2012 9.00a.m. – 6.00p.m.

Thursday 12 July 2012 9.00a.m. – 6.00p.m.

Friday 13 July 2012 9.00a.m. – 6.00p.m.

Saturday 14 July 2012 9.00a.m. – 4.00p.m.

2012AWISA 2012

11-14 July 2012Sydney Convention & Exhibition Centre

I AWISA 2012

QUICKCAM FOR EFFECTIVE AUTOMATIONThe real Solution is all about effective automation. The ability to simplify the manufacturing process, lower the required skill level in the shop, get product made faster, cheaper and 100% right every time, no matter what the product is. This is why so many companies, using QuickCAM Systems software, have expanded their businesses to supply other organisations more cheaply than those companies could make products themselves.

From a spectacular kitchen or bathroom design through to a CNC, QuickCAM Systems powerful combination of design and manufacturing software provides an integrated system, which can be seen running in some of the smallest, largest and most advanced manufacturing operations around the world.

QuickCAM Systems Stand 3135Phone 02 9980 7011

TITEBOND™ - IT’S AS EASY AS 1, 2 OR 3Woodbond adhesives offer an expanded line of Titebond products that cater to the cabinetmaker, furniture manufacturer and kitchen joinery professionals. These wood glues are at the leading edge of technology and Woodbond continues to provide innovative products to meet the needs of the Australian woodworking market.

Woodbond Adhesives Stand 4231 Phone 1300 133 439

BI-MATIC CHALLENGE SERIESThe Bi –Matic Challenge edge banders are built to suit Australian production and have been around for a long time. With the great exchange rates at present, the machines are excellent value. Come and have a look at the ron Mack Machinery Stand at AWISA 2012 to get a one on one presentation on the machine.

Ron Mack MachineryStand 4207Phone 1800 818 448

THE VERSATILE MINIPRESS PTake advantage of the Minipress P’s versatility for easy cabinets, door and front assembly. Minipress P saves time and provides flexibility in the workshop. Drilling and fitting insertion can be carried out with absolute precision and efficiency. The colour coded system for Ministicks and set-up plans makes processing of various components extremely simple. The inclusion of quick release chucks enables fast and easy tool-free drill changes.

Blum Australia Stand 2223 Phone 1800 179 186

DUST, FUME AND VACUUM SYSTEMSAustedan Fabrications specialise in purpose built reverse pulse dust collection systems with superior operational benefits for the joinery and timber industries.

The company’s Australian made dust collectors are specifically manufactured to suit customers’ requirement, specialising in dust extraction systems for CNC operated routing machines, automatic saws and all other high output automated woodworking machinery.

Austedan Fabrications Pty LtdStand 4301Phone 0410 440 338

AWISA 2012 I

PALETTE CAD PERFECT ROOMSDiscover a vast array of new possibilities for design and persuasive presentations for clients at the user’s fingertips. Impress them in the presentation phase with masterly performance that makes the craftsmanship shine. The practical advantages of Palette CAD do not end there. use the data already created to generate perfect manufacturing drawings and to conveniently program CNC machines

IDACSStand 2407Phone 1300 043 227

LASERS FOR ADVANCED WOOD PROCESSINGLST has for 25 years specialised in lasers for the advanced processing of wood products. With lasers from SEI (Italy) and universal Laser Systems (uSA) for die-board manufacture, marquetry, photo-engraving, form profiling, 3D texturing, craft and model-making, LST has the right machine for production demands. Australia-wide sales, training & support.

Laser & Sign TechnologyStand 3228Phone 02 9584 9499

CUTTING EVOLVED ALTENDORF _2From the inventor of the original sliding panel saw, meet the Altendorf_2, a new dimension in sawing.

Altendorf Asia Pacific Pty Ltd Stand 3209 Phone 1800 558 258

DIAMOND TOOLING AUSTRALIADiamond Tooling Australia offers a complete range of diamond tools to answer special demands, such as saw blades, edge bander tools, boring bits, soft and post forming cutters, laminating flooring cutters, router cutters for CNC routers and moulding machines. DTA has established a new PCD sharpening centre in Sydney using the latest advanced German electrical erosion grinding machinery with other advanced technical equipment.

Now with the use of new generation composite flat panel materials DTA offers a tested experience to assist its customers in the machining of these materials, followed by an affordable sharpening service.

Diamond Tooling Australia Pty LtdStand 4404Phone 02 9602 5999

I AWISA 2012

MAXIMISE PRODUCTIVITY - THE NEW PROFIT H10Profit h10 is the new CNC panel shaping centre from Felder. It provides panel shaping, drilling and milling in any desired form, all in just one work cycle. CNC shaping, CNC drilling, CNC nesting with unattended operation. Minimum waste and maximum material yield. The high cut edge quality can be processed further immediately. Maximum throughput with individual sizing cut capacity. Tomorrow’s technology for today’s productivity and profit.

Felder Group AustraliaStand 3412Phone 02 4735 1011

EDGE AND SURFACE SANDING SOLUTIONSFor manual or automated pre and post-sanding of edges and surfaces, Kory Dubay Manufacturing has a solution to suit, from the company’s partners Flex Trim, Gottschild, MC Talleres, Mirka and Southern Contours.

Kory Dubay ManufacturingStand 4232Phone 03 9311 1113

REDEFINING FOUR SIDED PLANINGThere is no magic involved in Weinig’s innovations. They are just the result of persistent development work. Weinig has driven solid wood processing forward and set new benchmarks time and again. The new Weinig cube continues the tradition – to make day to day work operations simpler, more productive and more profitable.

Michael Weinig Australia Pty LtdStand 3309Phone 02 9609 5911

LEDA DPME VERTICAL PANEL SAWThe principal advantage of good quality vertical panel saws is the use of a minimum of floor space while providing perfectly cut to size, perfectly square, chip free panels

A heavy duty machine is required to achieve such a high quality result and the Leda unit is in this category, even though the investment level is less than half that of some machines on the market.

This machine has a scoring saw unit, automatic movement of the rear baffles to avoid them being cut horizontally, dust extraction fan built into the saw head to assist dust collection and simple changing from vertical to horizontal cutting.

This unit is sure to attract lots of interest at AWISA.

Leda Machinery Pty LtdStand 3406Phone 08 7127 7730

LEDA-GOVE REVERSE PULSE DUST EXTRACTORSregarded as the best systems for both minimal maintenance and maximum performance, reverse pulse dust extractors use timed pulses of compressed air blasted through the filter tubes every 30 seconds or so, to keep them as clean as on day one. Nobody has to remember to clean anything. It just happens every minute of every working day.

The performance of the extractor never diminishes as all the filters remain clean. Effortless efficiency. Simply the best.

Gove are among the world’s leaders in this technology and their units are in stock in Australia now and will be on show at AWISA.


AWISA 2012 I

AustrAliAn mAde CnC routing mAChines

Multicam CNC Routing MachineryStand 1214Phone 02 4964 1900

Travelling rotary tool changer

4 way 90 degree aggregates

“L” drilling attachments Chisel head attachments 7 & 11 position drill attachments

CNC router bits and tools

Multicam CNC routing machines are 100% Australian designed and manufactured and offer world class performance with local backup and support.

heavy duty construction coupled with high speed drives, features and accessories aimed at the woodworking industry ensure that all Mullticam machines meet the needs of kitchen manufacturers, cabinetmakers, joiners, shopfitters, wardrobe manufacturers and any business involved in the woodworking

industry. Multicam’s class leading controller offers full G-Code support, WiFi communications and remote access, uSB file retrieval and is compatible with all major kitchen, cabinetmaking and shopfitting software.

Multicam has been supplying it’s range of CNC routing machines since 1982 and has an enviable reputation for quality and service that is backed by the company’s years of experience.

I AWISA 2012

THE PINNACLE OF MODERN PANEL SAWS ALTENDORF ELMO IVThe pride of modern panel sizing technology, Altendorf Elmo IV is a testament to modern engineering ingenuity. Combining the fruits of over 100 years of innovation and experience in making the finest cutting machines, Altendorf’s Elmo IV delivers uncompromised productivity as well as cutting efficiency in a single unit. Its four CNC controlled axes allows for reduced cutting time and improved accuracy. Together with the package’s panel optimisation software the ELMO IV allows for productivity increase of up to 50% without reinventing a business.


AUSTRALIAN MADE AIR COMPRESSORSSullair is Australia’s largest manufacturer of rotary screw air compressors, with a wide range of industrial compressors designed, engineered and manufactured in it’s production facility in Melbourne and diesel powered portable air-compressors imported from the uS head office. Products include rotary screw air compressors, air receivers, water chillers, vacuum systems and a range of associated ancillary equipment. Sullair’s compressors have application in the smallest to largest enterprises including workshops, manufacturing, mining and construction. Sullair’s participation at AWISA demonstrates that many of the products have been specifically designed to meet the demands of this specialised market.

Sullair AustraliaStand 4407Phone 1300 266 773

EVERYTHING FOR SAWS AND TOOLINGCamco is a specialist supplier of machines, spare parts, service and consumables used in the manufacture and maintenance of saws and tooling. The extensive range includes tungsten carbide and cobalt alloy saw tipping products, abrasives and super-abrasives as well as the latest high tech synthetic grinding oils and water based coolants. Major brands represented include Vollmer, reform, Oelheld and Kennametal.

On display will be the new CP200, the economical solution for fully CNC controlled grinding of TCT-tipped circular saw blades providing excellent cycle times while maintaining the highest standard of precision and finish.

Camco Cutting Tools International Pty LtdStand 3405Phone 03 8336 1500

ENTRY LEVEL EDGE BANDINGMagnum Engineering has been supplying quality entry level edgebanding equipment to the flat panel industry since 1987. These are pre-glued machines with or without trimming and corner rounding. Contour machines for edging corner cupboard shelves. Trimming machines for all kinds of edge finishing work and corner rounding machines.

Magnum EngineeringStand 4406Phone 02 9624 8029

AWISA 2012 I

HOMAG AUSTRALIA CELEBRATES 10 YEARS WITH A SPECIAL OFFER FROM BRANDTBrandt edgebanders are the benchmark for the Australian cabinetmaking industry. Join homag’s 10 year celebration at AWISA and take advantage of huge price reductions on the jubilee Edition models especially designed for Australian requirements. Precision, reliability and perfection from Brandt.

Brandt Ambition 1220FC Edition

Pre-milling for perfect edges

11 and 11m/minute feedspeed

Automation

Nesting package included

$74,000 + GST saving approximately $12,000


Premilling for perfect edges

14 and 14m/minute feedspeed

Automation




Premilling for perfect edges

20 and 20 m/minute feedspeed

Automation



Homag AustraliaStand 1101Phone 028865 2700

5-AXIS NO LONGER DOMAIN OF KINGS homag brings to AWISA the next step in the development of affordable 5-axis CNC processing with the Venture 316 Drive5 CNC processing centre. Doors, windows, stairs, patterns - fully interpolating 5-axis processing breaks all the conventional boundaries. And today’s technology is truly affordable. There is nothing quite like it.

Homag AustraliaStand 1101Phone 02 8865 2700

I AWISA 2012

BESSEY ONE HANDED CLAMP AND SPREADERThe new Bessey EZS one handed clamp brings to the market a more user friendly, reliable and trustworthy tool for those applications where high pressures (in excess of 2,000N) and function are needed. The all-round handle design ensures that the clamp can be used by most people and the accessible protected trigger release can be actioned with fingertip control irrespective of hand size.

Hordern & Company Pty LtdStand 3436Phone 02 9417 6968

LEITZ NESTING COMPRESSION ROUTERSOn show will be the latest in nesting compression routers including the new real Z3 diamond router by Leitz. This new diamond router can run at speeds of up to 30 metres per minute and lasts up to one hundred times longer than carbide routers.

Leitz Tooling SystemsStand 1111Phone 03 9760 4000

SMARTCUT OPTIMA 5 AXIS BRIDGE SAW FOR STONETechnology used in marble shops has sped up to a pace with modern fabricators using highly automated equipment to meet efficiency and quality requirements. Throughout its 50 year history, Breton has developed reliable, heavily constructed, flexible and technologically advanced equipment, and today offers the comprehensive sawing system, the Smart-Cut S/NC 550 Optima, a CNC bridge saw with a tilting rotary head, 5 simultaneous CNC axes and Multicup pick and place vacuum lifter built in the spindle body.

The Wood Tech GroupStand 4213Phone 1300 738 663

PRINT HIGH RESOLUTION GRAPHICS ON MANY MATERIALSCoJet-2612 takes full advantage of large-sized true flatbed and CNC flatbed technology. It is capable of printing high resolution graphics (up to 1440dpi) in colour, white and translucent patterns. Vivid photographic images are easily printed on many materials and final clear coat can be applied to achieve flat or high gloss protective coating. Also, on-board rIP software supports all major graphic formats.

Because of flatbed type, precise printing on one big heavy piece or many small pieces for volume production is possible. The model can be used for not only sign and graphics but also for various industries to support on-demand production.


NEW KREMLIN SPRAY EQUIPMENT The new EOS pump “accelerates performance”. The new air motor design allows a smooth start-up under low pressure air, and perfectly controlled fluid output, without any pulsation at the gun with very low air consumption. The gun, fed under ideal conditions, offers exceptional finishing quality and productivity.

Epac Productions LtdStand 3323 Phone 02 9645 3900

Xcite gun AVX gun

AWISA 2012 I

QUALITY AND RELIABILITY WITH THE AKRON 400 SERIESAkron 400 is a range of edgebanders featuring high versatility suitable for many applications. Innovative technological solutions, solid operating units and heavy duty construction are combined to ensure a high quality finish and great reliability under a wide range of working conditions.

Akron uses standard on every machine only electrospindles of the exclusive hSD rotax. These are high quality electrospindles that allow high power, compact design and top quality finishing standard.

Biesse Group AustraliaStand 1221Phone 1300 BIESSE

THE STRONG AND RELIABLE KLEVER G FT SERIES


SHELIX CUTTER AND SAND-FLEE DRUM SANDERThe Shelix cutter is for retro-fitting planing machines. From their experience with hand tools, most woodworkers know that a “shear” cut is far more effective than a straight plane down the length of timber. By staggering the cutters and segmenting them into practical, square Tungsten inserts, the cut is smoother, quieter and dust extraction efficiency is improved dramatically.

The Sand-Flee® portable drum sander is a bench top power tool, designed to save hours of tedious hand sanding while improving the finish of woodworking projects. This is “back-to basics” safe sanding for schools and community workshops. More versatile than an overhead drum sander; easier and safer to use than a belt sander; better control and results than a palm/orbital sander; cleaner than any other sander.

Woodcraft SuppliesStand 3108Phone 07 4129 4644

Numerical control machining centres with gantry structure, PC-based numerical control with BiesseWorks graphic operator interface. Intuitive and with great expandability to SW graphics, CAD-CAM. The Klever G FT Series is strong

and reliable and suitable for many types of applications and materials such as aluminum, acrylic and wood. It comes in a range of table sizes to suit a manufacturer’s requirements or space restrictions.

I AWISA 2012

KAESER AIRCENTERShowcasing the very latest in compressed air technology, Kaeser’s Aircenter range offers more than space saving compressed air production, treatment and storage: the Aircenter redefines the concept of turnkey compressed air systems. The compressor’s refrigeration dryer and air receiver are all enclosed in one cabinet, operating as one integrated package, an ideal choice for smaller businesses and workshops where space is at a premium. Live demonstrations daily at AWISA.

Kaeser CompressorsStand 1402Phone 1800 640 611

COSTA LEVIGATRICI SANDING MACHINESFor 30 years, Costa Levigatrici has produced some of the world’s best wide belt sanding machines. Specialising in machines for the true professional, Costa sanders are built to last, with the oldest machine in Australia in operation since 1986 and still going strong.

Ville-Tec Engineering & RepairsStand 3205Phone 02 9790 7955

THE GREAT VALUE CASADEI ALA20 PLUSThe Casadei ALA 20 Plus is a compact industrial edge bander that would suit any small cabinet making business. Great for processing caravan doors and any other 1mm or 2mm application. The features include a 2 litre glue pot with coil cut off guillotine. Pressure rollers create a good bond prior to the end cut off saw that will cut flush every time, through the easy to set up top and bottom trimmers. There is a 2mm profile scraper if required and buffers to finish off.

Ron Mack MachineryStand 4207Phone 1800 818 448

KLEIBERIT POLYURETHANE ADHESIVESIn the world of adhesives, not having Polyurethane adhesives (Pur) would be unthinkable. In a market where process speed and performance give the customer the edge over the competitors, Pur is the answer. Kleiberit’s Pur adhesives are suitable for flat lamination (including high gloss), assembly bonding, edge bonding, profile wrapping, hot coating (high gloss finishing system), and parquet bonding (construction and application). They are available in 1C, 2C liquid systems, also in 1C hot melts. Kleiberit Pur adhesives are available to meet every need. Manufacturers can discuss their individual requirements and Kleiberit can tailor a package to meet their needs.

Kleiberit Adhesives AustraliaStand 3126Phone 02 9907 1411

CABMASTER SOFTWAREreleased originally in 1982, Cabmaster Software is an Australian product written for the Australian market. Just like all Cabmaster Designer products, users can drag and drop to prepare plans using a comprehensive pre built library. Produce customised reports such as cutting lists, hardware lists, quotes and invoices, plan views, shop drawings and elevations. Designs can be reproduced in realistic 3D images. Cabmaster software has a library with a wide range of cabinets and detailed options allowing users to modify their units parametrically and easily change construction methods to nail, screw, cam or tongue and groove. Freeform allows cabinets to be created from scratch.

Cabmaster SoftwareStand 1412Phone 1300 778 287

AWISA 2012 I

HIGH CAPACITY THROUGHFEED MACHINE FOR PREMIUM QUALITY EDGE PROCESSING


All units of IMA’s Novimat Contour are of solid design and have optimal motor power, which ensures excellent repeatability, a high utilization rate and a long service life expectancy.

The Novimat Contour allows for cost efficient and reliable edge-banding of shaped components using tape up to 3 mm and lippings up to 20 mm thick:

• uncomplicated one-man operation through the automation of essentialfunctions.

• designedforindustrialuseandspecificallyforjointing,edgebandingandfine finishing of edgings.

• solidandrigidfabricatedbaseframewithatoppressuretrackwithdoublejoined V belt.

• fastgluechangeduetoIMAquick-locksystem.

• centralizedlubricationofthefeedchain.

• program-controlledfeedspeedbetween6and30metresperminute.

• theindustrialPCcontrollerICOSCompactisideallysuitedformidtohighend applications.

• Windows® based simple operation with graphical user interface.

PREMIUM CLASS PANEL SAWS


The Format-4 is more than just an alternative. It has state of the art design and state of the art technology combined with precision and ease of use.

6 year guarantee: absolutely maintenance free. A top of the line detail in the circular saw units makes long term precision and makes it maintenance free. The guiding system for tilting is grease free and dust free.

Six year guarantee on the guiding system: the no wear linear guiding system ensures smooth running of the sliding table.

TFT touch panel control with automatic programming functions. uSB port for quick and easy data input, network connection for data transfer, and much more.

I AWISA 2012

THE CNC WORKSHOP ON LESS THAN 5m2

The BhX 050 Optimat is the smart allrounder for drilling, routing and grooving.

Fast processing - saves time.

Takes up little room - saves space.

Simple operation - saves nerves.

Excellent processing quality - saves trouble.

Great value for money - saves money.

Homag Australia Stand 1101Phone 02 8865 2700

HOMAG EDGEBANDING – THE REAL EDGEBANDER unparalleled quality, unprecedented reliability. That’s what manufacturers expect when they buy homag, and that’s what they get. homag edgebanders are the benchmark for all edgebanders, and they deliver. Excellent control interface, simple and intuitive, coupled with the highest engineering design and quality. See the homag 2270 running at AWISA with Pur glue application. A great edge from a great edgebander.


STONE BENCH FABRICATION MACHINERY AND ADVICECDK Stone Australia, a leading supplier of machinery, tools and equipment to the stone industry, also provides integrated business and machine software for stone fabricators. CDK Stone also stock a large range of granite and marble slabs at branches in all the major states and NZ, and is able to provide advice on all aspects of stone bench top fabrication. CDK Stone will display the latest 4 axis CNC multi function work centre from Thibaut (France), as well as a range of tools and equipment for stone bench top manufacture.

CDK Stone Pty LtdStand 1401Phone 03 8552 6000

SINGLE OPERATOR VACUUM LIFTERSThe Schmalz range of vacuum lifters come in a range of capacities up to 300kgs - the perfect solution for handling panels. The simple operation of the tube lifters make it easy for a single operator to load and unload CNC machines, edgebanders, saw benches and other machines. There are even options for turning sheets from horizontal to vertical. Combined with an easy to move low friction track system or jib crane, they provide the total handling solution. Schmalz also offers a full range of vacuum clamping seals and blocks to suit most CNC machines.

Millsom Materials HandlingStand 4309Phone 03 9720 7966

MANAGING WORKFLOW WITH SERADEXIncorporating job scheduling, data collection and purchasing into a managed system gives manufacturers all the information needed to organise the work force and inform customers of realistic supply lead times. No more confusion and employee downtime figuring out what needs to be manufactured next, all the information will be delivered to a terminal on the shop floor, in real time. Accurate data collection also allows for reporting of estimate versus actual costs and profit.

Seradex Pty LtdStand 4119 Phone 02 8076 2240

AWISA 2012 I

ALTENDORF F45S VP SLIDING TABLE SAWThe Altendorf F45S VP sliding table saw is the ideal combination of productivity and ergonomics. Designed to save the operator’s time, it utilises the latest CNC technology. With a centrally controlled digital rip fence, productivity is increased substantially and repeatable accuracy is achieved regardless of the skill level of the operator with an Altendorf F45S VP.


PROJECT TF FROM MASTERWOODThe Project TF is a true feed drilling machine specifically designed for small to medium sized manufacturers and is capable to complete horizontal and vertical drilling. It is also available with a vertical router. The machine has the same control as all other Masterwood machines.

Masterwood Australia Stand 1112Phone 02 9624 1096

SMALL BUT MIGHTY EDGE BANDERS BY RHINOWith over 35 years experience in the woodworking/sawmilling industry, Thatcher Engineering’s rhino range of edge banders are forever expanding to meet market demands of both small and large business.

The rhino r3000S is a small but mighty machine incorporating all the features expected from a much larger model, including Teflon coated glue pot and the following functions; gluing, end trimming, top and bottom trimming, radius scraping and buffing. All functions programmable now via Delta touch screen controller. The r3000S and the new r4000 Compact measure only 2.5m long.

Thatcher Eng / Rhino Panel Pty LtdStand 4101Phone 03 9785 3222

MASTERWOOD EMBRACES GERMAN TECHNOLOGY Numerical control is the core of a woodworking machining centre. To achieve excellent performance, Masterwood has invested in innovative technology in collaboration with Beckhoff, the leading automation German company.

The Beckhoff numerical control based on a PC platform links up directly with the axis without NC interface. This solution allows inconceivable performances, like a high vectorial speed and higher precision in the machining operations.

Power and system limits are no longer restricted on the PC. Program size, marking memory, size of the process image, in practice these values meet all requirements. The practical limits of this technology based on PC to 32 bits throughout the world are less restrictive than the ones of the PLC used up until now.

Masterwood AustraliaStand 1112Phone 02 9624 1096

I AWISA 2012

STRYKER FROM ANDERSON OFFERS HIGH VOLUME OUTPUTThe point to point through feed machining line has revolutionised the field of boring, grooving and routing thanks to its innovative technology and maximum flexibility and productivity. This series has been designed to obtain the maximum flexibility possible while maintaining a high volume output. No machine setup time therefore greatly increased part to part throughput and overall productivity. Exclusive optical part readying for perfect edge referencing and boring without depending on the operator’s accuracy. Fully automatic parts positioning by the machine, therefore operator misfeeds are no longer an issue. Small batch random part processing is as effective as large run processing.

The Wood Tech GroupStand 4213 Phone 1300 738 663

THE NEW DOMINO XL DF 700 JOINING MACHINE BY FESTOOLThe greatest benefit of the Domino XL is that the tool can come to the workpiece, instead of the workpiece having to be carried to the tool. It enables fast, simple, precise and extremely stable jointing with measurably shorter setup times and time savings of up to 50% compared with bench mounted tools. Building on the success of the original Festool Domino DF500, the Domino XL brings the ability to make much bigger and stronger joints.

The patented pendulum cutting action has been scaled up to produce wider and longer joints, ideal for furniture and door construction and for producing structural joints in solid wood. The tool features unbeatable joint stability up to Domino size 14 x 140 mm.

It has variable routing depth settings from 15-70 mm and features a rapid setting of cutting height for materials of different thickness.

Thanks to high power and its oscillating cutter motion, it enables smooth, easy cutting even in hardwood. It also offers precise cutting of angled mortises with stepped positions or step less angle adjustment.

The most appealing benefit of the Domino system of joining wood is the time it saves as it is intended for larger, heavier components that can be difficult to take to stationary machinery.

Festool AustraliaStand 1233Phone 1800 063 900

INSURANCE FOR THE INDUSTRYCabinet Makers Insurance Brokers is a leading insurance broker for the woodworking industry. The company has experienced major success with hundreds of cabinet makers, shopfitters and associated trades participating in CMIB’s industry specific insurance programme throughout Australia. CMIB’s experience found most businesses had not been assisted to review their insurance arrangements for years nor had they been well informed of their options.

The company’s aim is to save clients’ time and money by providing specifically tailored, cost effective insurance products designed for the industry. Corporate level protection will be provided including many additional benefits included as standard.

Cabinet Makers Insurance BrokersStand 3332Phone 1300 694 470

AWISA 2012 I

DIAMOND - NOT JUST A GIRL’S BEST FRIENDWith ever increasing demands on tooling to not only offer a high grade finish but also longevity, diamond is becoming firmly entrenched in the woodworking industry. Along with a range of the traditional hSS and TCT knives Advanced Timber Systems will be showcasing the latest in PCD technology. This tooling is increasing life expectancy in hardwood flooring production from around 20,000 lineal metres when using TCT to more than 800,000 lineal metres in a single run. With setup costs now in the very affordable range Advanced Timber Systems can customise this latest technology to suit customers’ exact requirements.

Advanced Timber Systems Pty LtdStand 4113Phone 07 3715 7722

CNC MACHINERY FOR ALUMINIUMEstablished in Villa Verucchio Italy in 1982, LGF is today is considered a leading manufacturer of CNC machinery for the aluminium, light alloy, PVC stainless steel industries. LGF offers a product that is technically advanced and characterised by extreme robustness with an optimal quality/price ratio.

New from LGF is the Junior - CNC. Equipped with a colour monitor touch screen control unit, uSB port, rotating bench and pneumatic displacement, two horse power three phase motor and pneumatic clamps.

Gregory Machinery Pty LtdStand 1211Phone 07 3375 5100

TAKING CABINETS AND BOARDS TO NEW HEIGHTSKockums Bulk Systems offers the original VacuEasyLift and has a reputation for innovation, service and quality to meet any requirements. Why settle for less? Two products being displayed at AWISA are the compact board lift and rotate foot and a specially customised foot for side lifting cabinets without letting the drawers roll out.

Kockums Bulk Systems Pty LtdStand 3219Phone 03 9457 8226

DESIGN TO IMPRESS WITH MICROVELLUMMicrovellum’s turnkey solutions for the kitchen industry are designed to give customers immediate results by providing them with a massive library that has continued to evolve and expand over the last twelve years. users will impress architects and customers with their ability to produce professional 2D plan drawings and the highest quality 3D rendering with ease. Costings, quotes, cut lists, optimised nest patterns and part labels are all produced from the same program from just a few mouse clicks, in seconds. With Microvellum users have all the tools available to do 100% of what they design or manufacture in one program

Complete Software SolutionsStand 4123 Phone 02 9680 8777

AUTO SETTING PANEL SAW BY RHINOThe rJZ panel saw by rhino incorporates a user friendly touch screen interface which allows the operator to conveniently control all settings from the one position. No time wasted on manual adjustment or checking settings on this machine. The touch screen interface allows setting of the blade height, tilt angle and fence position with all measurements displayed on screen, so even a novice could set it up. The rJZ is commonly available in 3200 or other sizes on request.


I AWISA 2012

BEYOND TOOLS FOR CASOLIN, CASADEI AND ROBLANDBeyond ToolsStand 1001Phone 08 9209 7400

DESIGN AND BUILD CUSTOM JOINERY WITH MICROVELLUMMicrovellum’s turnkey solutions for the shopfitting industry are tailored to meet the needs of the custom built manufacturer. Even the most complex layouts with exact angles or radii, bulkheads and panelling can be designed and manufactured in Microvellum. Generate accurate costings, make any necessary changes and save custom products back to the library. Then generate cutting patterns for saws or CNC routers, from just a few mouse clicks, in seconds. With Microvellum, users have all the tools available to do 100% of what they design or manufacture in one program.

Complete Software SolutionsStand 4123 Phone 02 9680 8777

Casolin new Astra 500 CNC 3 axis panel saw.

Casolin Avant 1100 wide belt sander.

robland new Silverline panel saw CNC 3 axis. Also displayed will be the new robland KM780 edge bander with corner rounding.

Casadei K60 hot melt edge bander.

Casadei KCrh corner rounder.

HOMAG IS EDGEBANDING – SHAPES AND ALLOthers keep trying to copy, but the BAZ series from homag is without parallel and without compromise. It consistently delivers the highest quality manufacture of shaped edgebanded parts. homag BAZ does what homag says it will do. AWISA 2012 again showcases homag’s leading edge technology – come and see it and discuss the new options for BAZ technology, now affordable for even smaller volumes and smaller productions.

Homag Australia Stand 1101Phone 02 8865 2700

AWISA 2012 I

EDGEBANDING REDEFINED

Michael Weinig Australia Pty Ltd Stand 3309 Phone 02 9609 5911

higher performance, greater stability, reduced space requirements as well as a machine designed to achieve new edgebanding standards – the Arcus from holzher redefines middle class edgebanding machines. Arcus edgebanders process panels with thickness up to 60mm and edging up to a maximum thickness of 15mm (depending on type). Arcus edgebanders are available

in two models – Arcus 1334 and Arcus 1336 – and with a large number of accessory combinations. This ensures that the right machine is available for every application. The pressure bridge with rollers is a standard feature. As an option it can be equipped with belt upper tension for particularly smooth transport of the work.

HEAVY DUTY, FULLY AUTOMATIC NESTING WITH WOODTRON AUTONEST

Woodtron Pty LtdStand 1121Phone 03 9775 4100

Woodtron Pty Ltd caters to a wide range of companies, including cabinetmakers, kitchen manufacturers, staircase manufacturers and plastics companies. Whether a company’s requirements are large or small, Woodtron can offer a solution to suit its needs. The range includes the Woodtron Start and the Woodtron AutoNest.

The Woodtron Autonest, shown here, is a heavy duty, fully automatic nesting machine. It’s a leading machine for flexibility and production, to help drive any woodworking business forward.

I AWISA 2012

EXTRACTION AND FILTRATION SOLUTIONSAirtight Solutions provides proven extraction and filtration solutions of all sizes. Energy efficient systems of the highest performance, fully modular, and easily expanded or modified to suit changing needs. As a recognised industry leader Airtight will have a range of systems running at the AWISA show. Airtight has helped thousands of customers achieve cleaner working environments, improve system performance with quality products, design and superior installations.

Airtight SolutionsStand 1316Phone 1800 424 784

NEW NESTING SOLUTIONS WITH THE BIESSE ROVER A G FT SERIES The rover A G FT is Biesse’s new solution for nesting applications. The latest technical solutions, the extremely flexible work table and the innovative developments of the loading and unloading systems make the rover A G FT a very reliable and competitive machine. Available with automatic labeling of panels, sweeping arm with incorporated suction, and highly versatile software to suit any company’s requirements.


A RANGE FOR BOTH SOLIDWOOD AND PANEL PROCESSINGMPB Engineering opened its doors in 1974. The core element of the business is the design, manufacture, service and sales of woodworking equipment. While the company operates primarily within Australia, it also imports and exports products worldwide. As a leading woodworking machinery supplier in Australia, MPB has a huge range to suit all industries, from sawmillers to cabinet makers. MPB’s high quality machines are backed up by its own warranty and service department.

MPB Engineering Stand 4228 Phone 03 9702 7933

EASY HANDLING, TOP RELIABILITYThe unirip 310 is the perfect machine to enable small businesses to use modern Quickfix technology. Outstanding material guidance due to proven Weinig feed chain technology provides optimal cutting results. Extremely easy to operate fast precision ripping. With the patented QuickFix concept, setup times are reduced to a very efficient minimum. With five fold anti kick-back devices and the patented SafetyPlus system, it sets new standards in terms of operator safety. As a compact standard machine with advanced equipment options, the unirip 310 is the perfect multipurpose ripsaw for companies large and small.

Michael Weinig Australia Pty LtdStand 3309 Phone 02 9609 5911

AWISA 2012 I

GRIGGIO - MANUFACTURED TO THE HIGHEST STANDARDS


All Griggio machines are designed by the company’s own technical department. A breeding ground of ideas, the technical department is the heart of any company that can satisfy at the very best the requests of its customers, thanks to its capability to monitor the market and clients’ needs. A necessary operation to gain the information needed by the team of highly qualified professionals, information which is daily revised in the best way to realise a final product.

Each machine manufactured by Griggio is the result of a path that starts from the design and goes through the realisation of prototypes, which after many checks and thanks to the cooperation with qualified departments of the university, ends with the production and sale of machines capable of satisfying the highest quality standards.

HEESEMANN FOR EXCELLENT SANDING RESULTS


heesemann’s sanding machines are known world wide for their excellent sanding results, their reliable mechanical engineering, their economic function mode and their efficient service.

Thanks to adapted machine solutions from a flexible modular system the machines are composed individually for solid wood, veneer and lacquer sanding. Besides the material wood other solutions for the metal and plastic processing are also available.

Efficient machines for the sophisticated craft and the interior design also offer companies with smaller production quantities powerful and budget-priced solutions.

For a constant high quality of manufacture heesemann fulfills important quality standards such as the certification according to DIN ISO 9001.

I AWISA 2012

PROJECT 355 AND PROJECT 455 - THE EVOLUTION CONTINUES Masterwood is attentive to continuing productive challenges and to market evolution and expresses its innovative capability introducing the new 5 axis working centre, Project.

The Project range is being produced in either the bridge version with the Project 355, suitable for window and door production, or in cantilever version with the Project 455, more suitable for the flexibility needed in furniture production.

This Project range represents many years of research for Masterwood, summing up all the technological and structural experience developed in these years. It is fitted out with a birotative head totally controlled by a high precision set of kinematic mechanisms on which is mounted a 12 kW liquid cooled router unit. Wide diameter tools can be fitted on the 16 position tool changer. Manual or automatic positioning of the workpieces support bars and clamping devices.

Machines can be programmed thanks to the easy and flexible software that continually assures to the user a total control of the productive process. To reduce programming time, it is possible to use a post processor that allows the utlisation of the most common CAD and 3D softwares and is able to recognize the machining operations present on the workpieces, generating the related executive program in automatic mode; the user has only to associate the technical parameters to the single machining operations.

Masterwood AustraliaStand 1112Phone 02 9624 1096

DUST EXTRACTION SOLUTIONSTighter regulations for dust emissions require better filtration systems to be employed in dust extraction systems. The Fullpower jet pulse dust extraction systems not only meet these stringent demands in a quiet efficient manner but also come equipped with a self cleaning jet pulse system to maintain a constant air velocity.


FELDER CLEAN AIR DUST EXTRACTORSFelder extractors are for manufacturers with dust problems in the workshop or on their CNC machines. The Felder Clean-Air dust extraction units exceed the strictest international recycled air emission regulations. They return air into the workshop that is cleaner than the air that most people breath everyday. All Felder Clean-Air dust extractors are certified to h3.


TOOLING SYSTEMS SPECIALISTDimar Australia is an Australian owned and operated company, established in 1985, servicing the woodworking industry throughout Australia and New Zealand.

Dimar’s prime business is the production and distribution of the highest quality cutting tools using the latest technology. Diamond, tungsten carbide and high speed steel are the predominant materials chosen for their consistent and excellent cutting performances. The standard tool range is extensive and Dimar has skilled and knowledgeable staff on hand to discuss, design and manufacture specialised tooling that may be required.

Dimar Tools Australia Pty LtdStand 3118Phone 1800 252 255

AWISA 2012 I

GIVING CUSTOMERS THE EDGENanxing flat panel machines continue to grow to cater for the everchanging panel industry. From its unique range of panel saws and its compact to multi-station edgebanding machines, Nanxing is sure to have the machine to suit every individual with exceptional quality and competitive pricing.

Major Woodworking Equipment Pty LtdStand 3317Phone 02 9708 3233

HEBROCK TOP 100 HOT MELT EDGEBANDER


This hot melt machine is capable of edging material up to 2mm thickness. The machine gives the cabinet maker a solution that is super flexible, compact and affordable. With a heat up time of 3.5 minutes and ease of operation that only hebrock can offer, this machine is equipped with a trim saw, top and bottom milling station and power feed of the panel, allowing the operator to produce panels with ease.

Equipped with:• maintenance-freequickheatingpot.• highfrequencytrimsawstation(14,000rpm).• highfrequency-millingstation(14,000rpm)with2mmradiustooling.• extensiblesupportbartothefrontofthemachineforlargerpanels.• bandfeedapproximately11m/min.

I AWISA 2012

TOOLING FOR SOLID SURFACE MATERIALSBellaTools offers a comprehensive range of tooling for processing solid surface materials. The Bella Group has been in kitchen manufacturing since 1961 and in the last 7 years has become a supplier to the industry of quality, affordable products. The company started with solid surface under the brand name BellaStone and also offers BellaTools to complement the solid surface range. The company now also offers the Bellahardware brand that has been developed with one of the largest hardware manufacturers in China.

Bella GroupStand 2415Phone 02 9310 3222

CNC COPY ROUTER FROM ELUMATECThis Windows based, template-free aluminium copy router provides hands free routing, linked with speed, accuracy and repeatability. The SLK118 is equipped with a 4.5kW power torque spindle with push button tool change and is ideal for routing door styles, louvre slots and hinge cut-outs. The touch screen is easy to use with operator guidance through the menu and a graphic display of the profile. Economically priced, the SLK118 is the ideal replacement for manual copy routers.

Elumatec Australia Pty LtdStand 3120Phone 02 9725 2100

WOOD SHREDDING AND MOISTURE DETECTIONhawleys will again be demonstrating a wood shredder. By shredding waste it can be turned it into a useable product, or its volume can be markedly reduced and therefore the cost of disposal.

Also displayed will be a comprehensive range of moisture meters. Manufactured in Europe, these meters all offer good value and excellent quality. hawleys can also discuss its other products such as glue mixing and application equipment, veneer jointing machines, woodworking knives and a comprehensive range of veneer and plywood manufacturing equipment.

Hawleys Pty LtdStand 3333Phone 07 3356 1699

TIME TRACKING & JOB SCHEDULING SOFTWAREEmpower software can increase factory productivity from 20% to 100%. The company has 144 manufacturing clients throughout Australia and New Zealand. 22 client manufacturers’ videos can be viewed on www.youtube.com by typing in ‘Empower software time tracking.’ Software modules include time tracking of jobs and staff using second hand PCs on the factory floor; job scheduling; quoting; materials ordering and stock control.

Empower SoftwareStand 1408Phone 02 8011 3281

FINLEASE WILL GET THE FINANCEWith over 25 years of business finance experience, Michael ryan of Finlease is sure to get business the right finance when buying new or used equipment, motor vehicles, commercial and residential property. Finlease, a leader in its field for equipment finance has a full range of lenders to ensure business gets finance on competitive terms, fast turnarounds without having to put everything on the line. Michaels’ unique understanding of the woodworking industry makes the experience a refreshing change from the banks.

Finlease (Australia) Pty LtdStand 1313Phone 0417 279 891

AWISA 2012 I

NESTING CELL SOLUTIONS FROM HOMAG


homag is celebrating 10 years of trading in Australia and will be presenting a range of its nesting cell solutions at AWISA 2012.

Technology that helps manufacturers secure success through partnership and strategy.

I AWISA 2012

MANUAL HANDLING SOLUTIONShasemer Materials handling provide manual handling solutions to the woodworking industry through it’s range of Palamatic, Aerotech and GIS vacuum lifting products. Vacuum tube lifters are available with a multitude of suction feet for panels including 90° and 180° tilting versions. For heavier loads vacuum lifters can be combined with an electric chain hoist to do the lifting. Completing the solution is a range of jib, workstation and portable cranes that can all be designed to specific requirements.

Hasemer Materials HandlingStand 3308Phone 02 9153 9833

ANDERSON CNC FOR HIGH PRODUCTION


Andi routers are proven in high production manufacturing industries. They are used in all facets of industry through the world, including aerospace technology, woodworking production, plastics and composite materials processing. Due to the solid construction, high quality components and machine characteristics the Andi Selexx series offers the best price and quality ratio of any cost efficient

CNC router on the market today. Anderson CNC routers offer a first class CNC machining centre. Selexx has been developed specifically to satisfy the client demanding the utmost in technical quality and reliability in a CNC machining centre within a cost effective investment.

INTERMAC MASTER 33 FOR GLASS The Intermac Master 33 represents evolution in glass processing work centres. These machines are addressed to those companies that intend to develop their production capacities with a highly reliable machine with a reasonable pricing structure.

The option of 3 or 4 axes further extends the flexibility of these machines and allows them to adjust to the most varied productive needs.

The machine control is carried through a commercial Windows based PC granting ample connection and ease of use.


AWISA 2012 I

VISIT THE PLANIT DEMO BAR AT THE ENTRANCE TO HALL 4At Planit, design, pricing and cutlist systems start at $995, and CNC software systems start well under $20,000. From entry level cutlist packages to four Screen-to-Machine solutions, and every step along the way, Planit offers the software that can truly grow with a business. users can start with the module that best fits their budget now, and then simply add functionality as they need it.

To see why woodworkers around the world trust Planit software for their designs, cutlists, presentations, reports, factory drawings, CNC output, label and door software options plus business management software, visit the Planit Demo Bar and attend one of the presentations.

9.00a.m. - Photo realistic designing & automatic pricing

10.00a.m. - Entry level software

11.00a.m. - Screen to CNC machine software

12.00noon - Business management software

1.00p.m. - Labeling software options

2.00p.m. - Door manufacturing software options

3.00p.m. - Alphacam

Planit is a leading developer of software products servicing the woodworking industry. The company’s products help companies that design and manufacture goods such as cabinets for homes, offices, schools and hospitals. Planit products are integral to the success of thousands of companies worldwide, from large to small and across every aspect of manufacturing.

Planit’s cutting edge solutions include Alphacam, Cabinet Vision, Cabnetware and Manager.

Planit Stand 4201Phone 02 9544 8815

INNOVATIONS IN TOOLINGFor over 50 years, Leuco has been creating and pioneering developments in tooling. The company’s stimulus and challenge is to achieve the individual requirements of its customers. With this theme in mind, at AWISA 2012 Leuco Australia will demonstrate why they are one of the leaders in the tooling world.

Innovations include high precision nesting (hPN), the only nesting solution which combines tool and chuck; Leuco P-System, making the impossible possible; and Smart Jointer, the pre milling solution that’s gentle on the environment.

Leuco AustraliaStand 1404Phone 02 9773 5011

AUTOMATE CORE BUSINESS FUNCTIONS Manufacturers can now improve the bottom line by managing project costs, generating detailed schedules and tracking employee performance easily. TradeSoft™ software automates project estimating, time collection, scheduling, job costing, purchasing and inventory management, eliminating waste and increasing efficiencies.

This complete solution means more control, better decision making, fewer surprises and less stress.

TradeSoft™ is designed so that manufacturers can estimate faster, record employee time, analyse real time job costing and scheduling based on resource availability.

Intermic Group, the exclusive reseller of TradeSoft™, trains users to use TradeSoft™ effectively and powerfully. Obligation free demonstrations available.

Intermic GroupStand 3223Phone 02 9531 4666

I AWISA 2012

ALTENDORF WA8 TE - WA8 X SLIDING TABLE SAWWith a rich set of features, the WA8 TE and WA8 X panel saws provide accurate and clean cuts as well as easy operation. The WA 8 TE panel saw includes productivity features such as electric rise, fall and tilt of the saw blade as well as the ability to handle large panels on its 3.8 metre table and digital cross cut fence. The new WA8 X comes with the added convenient electric rip fence as standard. Both machines boast a powerful 7.5hp main motor and the trademark Altendorf sliding carriage system that over 130,000 businesses worldwide have come to rely on.

Altendorf Asia Pacific Pty Ltd Stand 3209 Phone 1800 558 258ENVIRONMENTAL SOLUTIONS

FROM EZIDUCT AND POLEXEzi-Duct has the industry experience to provide companies with solutions to their problems. Deal direct with the manufacturer and save money. Ezi-Duct modular ducting has smooth bore tube with pressed bends so it provides the best airflow of any duct on the market, and is the natural choice for dust collection and pneumatic conveying systems.

Polex provides the timber industry with a huge range of self-cleaning dust collectors that include both shaker and reverse pulse models. A strong focus on research and development has allowed Polex to produce a wide range of high performance equipment at competitive prices.

Ezi-Duct/Polex Environmental SolutionsStand 3222Phone 02 9645 2333

TOUGH, DURABLE LINEAR MEASURING SYSTEMThe TigerStop automatic stop/gauge and pusher system is the perfect addition to almost any machine tool where ease of setup, ease of use, and accuracy are required.

No more battle of the tape measures—every part is the same with TigerStop. Employees can be trained in a matter of minutes and be top performers by the end of the day.

TigerStop is part of TigerStop’s Built Metal Tough line of products. They work anywhere a tough and durable system is needed to position lots of material quickly and accurately.

Gregory MachineryStand 1211Phone 07 3375 5100

HIGH PRODUCTION IN LIMITED FACTORY SPACEThe Woodtron Start is a heavy duty, high production nesting machine for companies with limited factory space. uncompromised quality and reliability, to meet the ever demanding changes in market requirements.

Woodtron Pty LtdStand 1121Phone 03 9775 4100

AWISA 2012 I

NEW KDT HIGH SPEED EDGEBANDER WITH CORNER ROUNDING AT 26 METRES PER MINUTE


KDT recently introduced a new generation model 486-JK edgebanding machine capable of producing corner rounded panels at a feed speed of 26m/minute.

The excellent finish achieved is provided by a completely new four motor corner rounding unit to operate successfully and reliably at the increased feed speed. This machine will be demonstrated at AWISA, along with four progressively

smaller models covering the full range of edgebanding requirements of small cabinetmakers through to the highest production companies.

KDT edgebanders have established an excellent reputation around Australia since their introduction five years ago. With over 250 now operating over all Australian states, KDT has forged ahead to become a market leader in this country.

COMPACT AND DURABLE LASER ALIGNMENT TOOLSPLS laser tools were developed to give contractors the ability to transfer plumb, level or square layout reference laser lines and dot points for any trade application. PLS laser tools are affordable self-leveling, compact and durable laser alignment tools. Those who have wanted to purchase a laser level but have been unable to decipher all the jargon and are unsure of which instrument or features and benefits are most suitable for their application should look no further than Position Partners for assistance. A full range of leading instruments are backed by superior service and industry expertise.

Position Partners Pty LtdStand 3335Phone 1300 867 266

NEW BOARKE CNC AND TURANLAR POST FORMING LINEThe BWM-C481 AE – all new CNC from Boarke of Taiwan, sold with CAD-T software from Germany.

Beyond ToolsStand 1001Phone 08 9209 7400

T-FC180 milling machine.

T-rP135 nib roller with heating.

T-PF280 flow post former.

Flow through post forming. Three machine production line by Turanlar of Turkey.

I AWISA 2012

ECONOMICAL AUTOMATIONLuna Machinery’s range of programmable double mitre saws provides greater productivity at an economical cost. The range offers efficient cutting of aluminium, uPVC and timber, and features industrial touch screen Omron controllers, motorised mobile cutting head, accuracy to +/- 0.1mm, programmable up to 999 different cutting operations, automatic feed and cut mode, automatic angle tilting at 45 and 90 degrees, software to extend maximum cut length to over 10 metres, full overhead safety guarding as well as two handed safety control.

Luna MachineryStand 3328Phone 1300 736 556 LEDA –HOLD ELECTRONIC 3-AXIS

PANEL SAWSThe desired panel saw of most wood machinists today, has an electronically controlled rip fence to ensure accuracy and to increase efficiency.

On the hold brand machines, now sold in many countries around the world, the fence is moved by a ball screw driven by an accurate servo-motor, to one tenth of a millimetre tolerance.

The second and third axes, also driven by servo-motors, operate the height setting of the main saw blade above the work table and the tilt setting of the saw assembly to any required angle from vertical to 45°.

With a world class sliding table of either 3.2 or 3.8 metre length, touch screen control, heavy construction and overhead safety guard, the hold is an excellent panel saw for a very modest investment and can be inspected at AWISA.


EDGING FORWARDFelder’s Format-4 premium edgebanders offer quick set-up, easy maintenance and outstanding performance. regardless of whether coiled or strip materials are used, the new Format-4 models deliver extremely impressive machining results and extraordinary value for money.


PREMIUM QUALITY AND MAXIMUM POWERThe Fein MultiMaster is now available in a cordless version. The new battery-powered Fein MultiMaster embodies more than 40 years of experience in oscillation technology. Like the mains-powered MultiMaster, the cordless version allows users to enjoy unique versatility and performance, as well as the same high “made in Germany” quality as the original. The new battery-powered Fein MultiMaster is an indispensable aid in the workshop or during assembly.

Fein Power Tools Stand 3119 Phone 02 9892 1533

FAST AND ACCURATE ESTIMATING WITH SERADEX The critical piece to the success puzzle is the ability to accurately and rapidly produce a correct and accurate estimate. Many in the industry have spent hours poring over plans and specifications, hoping that all material and labour costs have been covered to come up with a quote. As a result, estimators must be highly experienced, with extensive product knowledge. With Seradex estimating tools, this process can be cut to a fraction of the time, and human-error be drastically reduced, so a company’s most valuable employees are free for other tasks.

Seradex Pty LtdStand 4119 Phone 02 8076 2240

AWISA 2012 I

SKILL G FT SERIES OFFERS A NEW TECHNOLOGY SOLUTION


NEW RAPID CHANGE SERIES RELEASED FOR AWISA The new rapid Change incorporates one touch on the Delta controller to change machine settings from 1mm to 2mm tape, and each machine includes a two tape holder magazine to hold different thickness tape or different colour tape.

The rapid Change is available in the following models: r4000rC incorporating one touch tape change and two tape holder magazine, Teflon coated glue pot, end trimming, top and bottom radius trimming, top and bottom radius scrapers and buffing.

r5000rC incorporating one touch tape change and two tape holders, Teflon coated glue pot, end trimming, main top and bottom trimming, 2 motor corner rounding, top and bottom radius scrapers, top and bottom glue scrapers, white oil spray unit for PVC enhancement and top and bottom buffing.

r8000rC incorporating the features of the r5000rC plus jump milling and second top and bottom rough trimming.


CLASSIC CABINETS BY ALTENDORF SOFTLINKClassic Cabinets is a truly flexible software package from Altendorf Softlink. The software encompasses all areas of production from design to manufacturing. Starting with only the components that the user needs, Classic Cabinet software comes in several configurations for business large and small. With intuitive yet powerful features such as panel optimisation, nesting, cutting lists, exploded views, intelligent labelling and many more, Classic Cabinets is built for the joiner.


A new technology solution designed for nesting applications allows great flexibility of use for the processing of panel and solid wood elements. The solid structure of Skill G FT provides high speed of execution and maximum precision of the finished product.

The composition of the machine is adaptable to customer needs and also allows the creation of automatic cells with loading and unloading systems.

I AWISA 2012

SOFTWARE FOR SELLING ONLINEEQ Software is a leading provider of business management and eCommerce solutions for the kitchen, bathroom and bedroom industry, with over 6000 users worldwide. The revolutionary software can manage every job from specification through production to installation. Manufacturers that are thinking of expanding their businesses on the internet should talk to the experts at EQ Software about online retailing and business-to-business solutions with eStore.

EQ AustraliaStand 4210Phone 03 9015 7876

LATEST TECHNOLOGY FROM FULLPOWERAdvanced Timber Systems will be displaying the very latest machinery including four side moulder, jet pulse dust extraction, tool grinders and much more. Now entering its second decade in Australasia, and with more than 500 machines sold, Fullpower is becoming a familiar sight in the solid timber industry in all areas from small timber merchants and joineries right through to large sawmilling companies.


BRYKO – EUROPEAN QUALITY BY CEHISAThe latest offering from European edgebander manufacturer Cehisa is the Bryko PC Plus. This comprehensive edgebanding machine is equipped with a full suite of essential features including; pre-milling, hot melt glue pot, automatic feed, twin saw end trim unit, corner rounding and buffers are supplied standard. The Bryko PC Plus packs a real punch for the smaller operator at an affordable price.

Gregory Machinery Pty LtdStand 1211Phone 07 3375 5100

PERFECT PROCESSING RESULTSFelder’s range of compact and affordable edgebanders offer fast readiness for use combined with perfect results. Depending on the model either standard endless edgebanding material or laminated edgebanding material up to 3mm can be used. Precise adjustments for sheet material 10mm – 45mm. A solid cross cutting unit for 90 degree cuts at the leading and trailing ends, and a combination cutting unit for perfectly cut round and chamfered edges.


AUSTRALIAN MADE CLAMPING SYSTEMSVersatile clamping and gluing systems manufactured in Australia. Clamping racks available in 2.4m, 3.5m and 4.5m. Clamps from 800mm to 3.0m working widths. Weldline also stock a range of Titebond® woodworking glues.

Weldline Woodworking MachineryStand 4227Phone 08 8280 6440

AWISA 2012 I

THE BIGGEST AND FASTEST ROBOT AT AWISABargstedt is the homag Group handling expert. No one can claim such a high level of expertise with the highly intelligent WoodStore software that controls both inventory and processing machines. See it at AWISA, talk to any of the nine existing users in Australia. Storage and retrieval systems are the next evolution in the development of panel processing, production and inventory management. Integrate with a saw, integrate with a nesting machine, connect to several machines. – the possibilities are nearly endless. Be online and In control and benefit from the enormous potential productivity and material gains. Visitors won’t be able to miss it at the AWISA 2012 - it will be the biggest, and fastest, and most reliable robot in the place.


LEDA LACQUERED PANEL SANDERSSanding lacquered or painted panels between each undercoat to leave a perfectly smooth surface without any flaws and without sanding through the previous coating, is a process demanding extreme accuracy.

The single belt special purpose sanders from Leda with a single soft rubber contact roller, currently achieve this every working day in factories around Australia. With variable sanding belt speed and variable feed speed, the perfect combination for any type of paint can be easily achieved, without a large price tag.

Different widths of 600mm, 900mm, 1100mm and 1300mm are available.

A 1300mm will be demonstrated at AWISA.


ESOLUTION FROM HOMAG, THE SOFTWARE FOR THE FUTUREhomag presents its eSolution WoodCAD/CAM at the AWISA 2012. From order entry and product creation to processing on the homag Group machine, eSolution creates a seamless integrated and comfortable environment. Parametric, 3D for 5-axis, hardware library, parts lists, bills of material, drawings and CNC programs. A complete package for business and the production facility.


AWISA 2012 I

ADMISSIoN AND REGISTRATIoN

AWISA 2012 is a trade-only exhibition and all visitors are asked to register. Visitors can register on arrival at the exhibition, but it is preferred that they pre-register. Pre-registrations can only be done through the AWISA website, www.awisa.com.

As in the past, children over 6 months of age and under 15 years of age are not admitted, but AWISA provides a professionally run children’s hospitality suite with activities and entertainment to suit the various age groups.

CAR PARKING

Parking is available under the venue, access off Darling Drive. Full day rate is $32.00. Other car parks in the area include the Entertainment Centre car park, the harbourside car park, access from Murray Street, and the harris Street car park, access from Allen Street. All are within walking distance of the venue, some by overbridges that shorten the route.

ACCoMMoDATIoN AND TRAVEL BooKINGS

In the Darling harbour area adjacent to the Sydney Exhibition Centre there are over 4000 hotel rooms. Special rates have been negotiated at a number of these and other hotels. Bookings for hotels and travel can be made through www.awisa.com or by phoning the Lido Group on 1800 817 339 or 02 8585 0888.

AIRPoRT SHuTTLE BuSES

A fleet of 48 seat coaches will provide a complimentary shuttle service between the two domestic terminals and AWISA 2012, with the service running every half hour from 8.00am each show day, with the last service leaving the exhibition one hour after the close of the show each day.

On arrival at Sydney airport go to the baggage claim area in either domestic terminal and look for the bus company representative with the AWISA sign, or go to the Qantas group coach bays to the east of

the Qantas terminal, T3. Qantas passengers should exit the Qantas terminal ground floor and turn left. Virgin, Jetstar and other T2 passengers should exit the T2 terminal ground floor, walk along the pedestrian footpath through the ground floor of the car park to the Qantas terminal, then head right to the Qantas group coach bays. Look for the bus with the AWISA sign. International visitors can connect to the AWISA shuttle by taking the airport shuttle to the domestic terminals.

LuGGAGE RooM

Luggage can be stored during the day in the luggage room in the venue foyer. Items are stored at owners risk.

“BrEAkFAst with sAm kEkoviCh”

The AWISA 2012 celebrity breakfast will take place on Friday 13 July in the Parkside Ballroom at the Sydney Convention and Exhibition Centre. “Breakfast with Sam Kekovich” will be an entertaining start to what is always AWISA’s busiest day. Sam Kekovich is one of the real personalities of AFL football and since his playing days has become a media identity, most recognised as the Australian Ambassador for Meat and Livestock and is seen on multi-award winning advertisements for Australian lamb as “Sam the Lamb Man.” Tickets cost $60.00 and can only be booked online at www.awisa.com through the registration page.

SHoW HouRS

Wednesday 11 July 2012 9.00a.m. – 6.00p.m.

Thursday 12 July 2012 9.00a.m. – 6.00p.m.

Friday 13 July 2012 9.00a.m. – 6.00p.m.

Saturday 14 July 2012 9.00a.m. – 4.00p.m.

For more information on all aspects of AWISA 2012, including the list of exhibitors, and to pre-register, book breakfast tickets, or to book accommodation please visit www.awisa.com.

AuSTrALIAN WOODWOrKING INDuSTry SuPPLIErS ASSOCIATION LIMITED

Phone 02 9918 [email protected]

www.awisa.com

DISCLAIMEr

This magazine is published by the Australian Woodworking Industry Suppliers Association Limited. Advertising statements and editorial opinion are not necessarily those of AWISA Ltd unless expressly stated. The publisher assumes no responsibility for errors or omissions or any consequence of reliance on this publication.

exhi

bitio

n in

form

atio

nAWISA 2012 11-14 July 2012

Sydney Exhibition CentreDarling Harbour, Sydney

AWISA DESIGN 2012 I Page 35

See the latest technology for your future

AWISA PANEL AWISA DESIGN AWISA SOLID WOOD

The trade show for the cabinet, joinery, furniture, timber and panel industries. Register at www.awisa.com

11-14 July 2012SYDNEY EXHIBITION CENTRE DARLING HARBOUR SYDNEY

ORGANISED BY THE AUSTRALIAN WOODWORKING INDUSTRY SUPPLIERS ASSOCIATION LIMITED. T: 02 9918 3661 E: [email protected]

awisa2012_machinery_screen

Documents

panel processing

cabinet makers association

tools internationalcarb

furniture industries

solid wood processing

coma preview

latest technology