avtrac - extron electronicsmedia.extron.com/download/files/brochure/avtracsystem_bro_reve.pdf ·...
TRANSCRIPT
Architectural Connectivity
➤ Modular enclosure for AAP - Architectural Adapter Plates
➤ ADA compliant for slope and rise
➤ Select from hundreds of available AAPs for fully-customizable A/V connectivity
➤ AC power modules available
➤ Choice of carpet channel or rubber inlay strip
➤ UL/c-UL Listed
AVTrac®
LOW PROFILE FLOOR-MOUNT RACEWAY SYSTEM FOR
A/V CONNECTIVITY
The elegant alternative to trenching and floor coring
A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
7.50 "(19.05 cm)
7.50 "(19.05 cm)
3.63 "(9.21 cm)
4.27 "(10.84 cm)
3.70 "(9.40 cm)
.67"(1.70 cm)
END VIEW - ACTUAL SIZE
Introduction
The patented, low profile AVTrac raceway system meets
accessibility standards for slope and rise as specified
by the ADA - Americans with Disabilities Act. The 8-foot
(2.4m) raceway can be installed underneath new or existing
commercial grade carpet and is available in two versions. The
AVTrac 482C accommodates matching carpet in the aluminum
raceway top cap for use in new installations or installations
where new carpet is being installed. The AVTrac 482R includes
a black rubber strip for installation in the raceway cap and is
ideal for retrofit applications. For best results, installation by a
professional carpet installer is recommended.
The modular AAP Enclosure supports all of the hundreds
of available Extron Architectural Adapter Plates for a fully
customizable connectivity solution. Popular AAPs include
USB, HDMI, DisplayPort , VGA and audio pass-through plates;
voice, data, and control pass-through plates; and powered
products such as Extron PoleVault® and MTP Series twisted
pair transmitters. The enclosure provides two double-space and
two triple-space AAP openings, sufficient for mounting up to
10 single-space AAPs. Blank plates are also available to cover
any unused AAP openings. Two AVTrac AAP Enclosures can
be mounted side-by-side on separate raceways utilizing the
optional AVTrac Extra Channel Kit.
Optional accessories are available to customize the system
to your installation needs for a professional finish that is
sure to please the most demanding clients.
The proliferation of technology in the workplace has increased
the demand for data, power, and A/V signal connectivity.
Architects, interior designers, and A/V system integrators are
often forced to compromise both aesthetics and system designs
in order to accommodate preexisting network drops and power
outlets. Alternatives, such as poke-through
devices and floor boxes, can be too
conspicuous, costly, or even
prohibited by building owners.
With the Extron AVTrac,
architects and designers
are no longer limited by the
placement of wall-mounted
A/V, network, and power
connections. AVTrac is a low profile,
floor-mounted raceway system with a
flexible, modular AAP - Architectural Adapter Plate
enclosure for A/V, network, and power connectivity. AVTrac
offers a discreet, cost-effective alternative to floor coring for
poke-through devices, trenching for floor boxes, and raised
access flooring systems. It allows power, data, and A/V signal
connection points to be located wherever they’re needed, with
minimal impact on room design or aesthetics. AVTrac is ideal
for use in classrooms, training centers and other reconfigurable
spaces, and corporate boardrooms, as well as for adding new
A/V connectivity to legacy installations and architecturally
sensitive environments.
A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
7.50 "(19.05 cm)
7.50 "(19.05 cm)
3.63 "(9.21 cm)
4.27 "(10.84 cm)
3.70 "(9.40 cm)
.67"(1.70 cm)
END VIEW - ACTUAL SIZE
Features
Cost-Effective Alternative to Floor Coring and TrenchingAVTrac is a cost-effective alternative to poke-
through devices, floor boxes, and raised-access
flooring systems. AVTrac provides the flexibility
to place A/V signal connections where they are
needed. The raceway system is ideal for use
in new and retrofit applications as well as in
architecturally sensitive environments.
Fast, Efficient InstallationAVTrac can be installed and fully operational in
a matter of hours, keeping labor costs and down
time to an absolute minimum.
ADA CompliantAVTrac complies with ADA – Americans with
Disabilities Act standards for slope and rise, and
is ideal for use in schools, corporate, government,
and retail applications.
Easy Access Cover PanelThe AVTrac enclosure features a removable top
panel for quick and convenient cable termination
and connector installation.
Modular AAP EnclosureAVTrac’s modular AAP Enclosure features
openings for two double-space and two triple-
space AAPs for a fully customizable connectivity
solution. Two AVTrac AAP Enclosures can be
mounted side-by-side in separate raceways
utilizing the optional AVTrac Extra Channel Kit.
The enclosure can accommodate any of the
hundreds of available Extron AAPs with popular
audio, video, phone, and data connectors, as
well as one AVTrac AC Power Module. Additional
accessories are available for customization.
UL/c-UL ListedAVTrac has been tested by Underwriters
Laboratories, Inc. to nationally recognized safety
standards. It is also approved for use in New
York City by the NYC Dept. of Buildings: Electrical
Division.
AC Power Modules for AVTrac AAP EnclosureAC Power Modules are designed for use with the
AVTrac Floor-Mount Raceway System and the
AVTrac Extra Channel Kit. AVTrac AAP Enclosures
support one AC power module. Discrete AC
outlets are available for the US, Central Europe,
and other major world markets. The US version
is available with two or four unswitched Edison-
style AC outlets, while all other versions feature
one unswitched AC outlet. A Universal AC Outlet
that accepts a variety of plug types including UK,
2-pin Europlug, Italy, Denmark, and India, is also
available. For complete compatibility information
on all AC plug types, see the Universal AC Outlet
Compatibility Guide.
A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
7.50 "(19.05 cm)
7.50 "(19.05 cm)
3.63 "(9.21 cm)
4.27 "(10.84 cm)
3.70 "(9.40 cm)
.67"(1.70 cm)
END VIEW - ACTUAL SIZE
Accessories
AVTrac 482C with matching carpet installed
AVTrac 482R with rubber inlay installed
AVTrac Extra Channel Kit shown with two enclosures mounted side-by-side
Inlay Cap OptionsAVTrac is available in two versions to fit the
installation requirements of most environments.
The AVTrac 482C features an open channel
for customer-selected, unpadded commercial
grade carpet between 1/4 inch and 5/16 inch
(7 mm to 9 mm) thick to match the surrounding
décor. The AVTrac 482C is ideal for use in new
installations, and those in which new carpet is
being installed. The optional AVTrac Rubber Inlay
Kit includes a black rubber inlay that mounts
directly in the AVTrac 482C carpet inlay channel.
The AVTrac 482R includes a black rubber inlay
strip for installation in the top cap of the raceway.
It is ideal for retrofit applications where additional
matching carpet is not readily available.
Optional Extension KitThe matching AVTrac Extension Kit includes
an additional 4 feet (1.2 m) of cable raceway
and side ramps. It can be easily cut to length
as needed and allows A/V, power, and data
connectors to be placed from 8 feet (2.4 m) to
16 feet (4.8 m) from a wall or other area The
AVTrac Extension Kit can be used in combination
with the Rubber Inlay Kit.
Extra Channel KitThe AVTrac Extra Channel Kit allows the
AVTrac system to run two or more cable raceway
channels side by side between one set of side
ramps. The Extra Channel Kit provides additional
raceway capacity for A/V cable routing. It is
packaged in two 4-foot (1.2 m) sections for a
total length of 8 feet (2.4 m).
Transition AdaptersThe Raceway Transition Adapter is designed
to work with wall-mounted cable management
systems, including Wiremold 4000 Series™
steel raceways. The AVTrac Raceway Transition
Adapters are available in matching Wiremold
Ivory ScuffCoat™ finish.
The AVTrac Retrofit Transition Adapter is
designed to provide a smooth transition from
the AVTrac floor-mounted raceway to a wall-
mounted patch panel. It facilitates cable pass-
through from wall-mounted AC outlets and
A/V connection plates to the raceway system.
In addition, it provides an alternative solution
when base studs cannot be cut due to stringent
building codes.
A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
AC Outlet Options
US Central Europe UniversalFrance Australia
AVTrac Accessories
The Extension is an optional 4' (1.2 m) raceway track extension kit for use with the AVTrac Floor-Mount Raceway System.
The Extra Channel Kit allows two or more cable raceway channels to run side by side between one set of AVTrac side ramps.
The Raceway Transition Adapter is designed to work with wall-mounted cable management systems, including Wiremold 4000 Series™ steel raceways.
The Rubber Inlay Kit provides a durable, 0.22" (5.6 mm) rubber strip for an aesthetic alternative to matching carpet.
The Cable Pass-Through Kit mounts at the end of an AVTrac Extension Kit and is designed for applications where
cables need to be passed from the wall to a hollow table leg, desk, or a fixed lectern location.
The Rough-in Adapter is a raceway-to-base stud cable pass-through that provides a clean transition for routing
electrical conduit and A/V cables from inside a finished wall into the AVTrac raceway.
The AAP Enclosure is designed for use with the AVTrac Floor-Mount Raceway System and Extra Channel Kit. The
enclosure includes two double-space and two triple-space AAP – Architectural Adapter Plate openings.
The AVTrac Retro Trans Adapter is designed to provide a smooth transition from the AVTrac floor-mounted raceway to a
wall-mounted patch panel. It facilitates cable pass-through from wall-mounted AC outlets and A/V connection plates to the raceway system.
Model Version Description Part #AVTrac INST TRANS 100WM Wiremold; Ivory 70-783-01
Model Version Description Part #AVTrac INST WTP Wall Trim Plate for AVTrac 70-782-01
Model Version Description Part #AVTrac 4C EXT Extension Kit, 4' (1.2m) – Carpet 70-645-04
Model Version Description Part #AVTrac INST CPT Cable Pass-Through Kit 70-714-02
Model Version Description Part #AVTrac INST EXCL Extra Channel Kit for AVTrac 70-671-01
Model Version Description Part #AVTrac 8R Inlay Kit Rubber Inlay Kit for AVTrac 70-670-01
Model Version Description Part #AVTrac AAP ENCL Holds up to 10 AAPs 70-801-02
Model Version Description Part #AVTrac Retro Trans Adapter for AVTrac 70-679-22
Model Version Description Part #AVTrac INST RIA Rough-in Adapter for AVTrac 70-781-01
AVTrac is available with discrete AC outlets for the US, Central Europe, and other major world
markets. The US version is available with two or four unswitched Edison-style AC Outlets,
while other versions feature one unswitched AC Outlet. Power modules for Europe include
one AC outlet prewired with double-isolated cable. The Australia Power Module includes one
AC outlet and conduit only. A Universal AC outlet, which accepts a variety of AC plug types
including UK, 2-Pin Europlug, Italy, Denmark, and India, is also available. The Universal AC Power Module includes one AC
outlet and is available in two versions, conduit-only and prewired with isolated cable, to meet local market requirements.
Two US Outlets 70-799-08
Four US Outlets 70-799-09
Central Europe Outlet 70-799-03 Uni ISO Cable 70-799-06
Uni Conduit 70-799-07
France Outlet 70-799-04 Australia Outlet 70-799-05
Note: For complete compatibility information on all AC plug types, see the Universal AC Outlet Compatibility Guide, available online at www.extron.com/UACguide
The Wall Trim Plate compensates for minor over-cutting of gypsum wallboards during the installation of an AVTrac raceway system.
www.extron.com © 2010 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners.
Extron USA - West Headquarters
+800.633.9876Inside USA / Canada Only
+1.714.491.1500+1.714.491.1517 FAX
Extron USA - East
+800.633.9876Inside USA / Canada Only
+1.919.863.1794+1.919.863.1797 FAX
Extron Europe
+800.3987.6673Inside Europe Only
+31.33.453.4040+31.33.453.4050 FAX
Extron Asia
+800.7339.8766Inside Asia Only
+65.6383.4400+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655+81.3.3511.7656 FAX
Extron China
+400.883.1568Inside China Only
+86.21.3760.1568+86.21.3760.1566 FAX
Extron Dubai
+971.4.2991800+971.4.2991880 FAX
11-201068-1420-01REV. E1
specifications A V T R A C F L O O R - M O U N T R A C E W A Y S Y S T E M
Specifications
GENERALPower US models .................................................. 125 VAC, 50/60 Hz, 20 A (max.) International models .................................... 240 VAC, 50/60 Hz, 10 A (max.)Enclosure type ................................................ Metal track base and top, metal connectivity box and
cover, plastic rampsTrack system End ramps .................................................. 0.67" (1.7 cm) H x 9.36" (23.8 cm) radius, approximately
4.5° slope Side ramps ................................................. 0.67" (1.7 cm) H x 7.50" (19.0 cm) W on either side of
track x 96.0" (243.8 cm) L, approximately 4.5° slope AVTrac 482C track base and top .................. 1.03" H x 3.70" W x 96.0" L
(2.6 cm H x 9.4 cm W x 243.8 cm L) AVTrac 482R track base and top .................. 0.95" H x 3.70" W x 96.0" L
(2.4 cm H x 9.4 cm W x 243.8 cm L)
Specifications are subject to change without notice.
Architectural Connectivity SolutionsExtron offers a full selection of complementary Architectural Connectivity
accessories for a complete architectural solution to enhance AVTrac Floor-
Mount Raceway Systems. With our easy to use and interactive online
Connectivity Configurator, you can design the AVTrac system to fit your
client’s exact needs.
Extron has hundreds of AAP – Architectural Adapter Plates making it
easy to fully customize the unit to meet the connectivity needs of each
installation. Popular AAPs include USB, DisplayPort, DVI and HDMI; VGA and
audio pass-through plates; voice, data and control pass-through plates.
The Extron Connectivity Configurator is an interactive, drag-and-
drop, online tool for designing and customizing architectural connector
installations. This tool presents an up to the minute list of every Extron
AAP – Architectural Adapter Plate currently available. Users can easily sort
through the hundreds of connector options and simply drag and drop their
selections into place. The resulting configuration can be printed for inclusion
in customer presentations and documentation.
Model Version Description Part #
Carpet Inlay Channel
AVTrac 482C Carpet Inlay, No AC power 42-155-00
AVTrac 482C Carpet Inlay, w/AC US, Prewired Conduit 42-155-24A
Rubber Strip Channel
AVTrac 482R Rubber Inlay, No AC power 42-156-00
AVTrac 482R Rubber Strip, w/AC US, Prewired Conduit 42-156-24A
AVTrac Extension Kit
AVTrac 4C EXT Extension, 4’ (1.2m) - Carpet 70-645-04
AVTrac Installation Accessories
AVTrac 8R Inlay Kit Rubber Strip Inlay Kit for AVTrac 70-670-11
AVTrac INST EXCL Extra Channel Kit for AVTrac System 70-671-01
AVTrac INST RIA Rough-in Adapter for AVTrac 70-781-01
AVTrac INST CPT Cable Pass-Through Kit 60-714-02
AVTrac INST WTP Finished-Wall Trim Plate for AVTrac 70-782-01
AVTrac RETRO TRANS Retrofit Transition Adapter for AVTrac 70-679-22
AVTrac INST Trans 100WM Wiremold; Ivory 70-783-01
AVTrac AAP Enclosure
AVTrac AAP Enclosure For AVTrac Extra Channel Kit 70-801-02
AVTrac AC Power Modules
AVTrac 2AC US Two US Outlets, Prewired Conduit 70-799-08
AVTrac 4AC US Four US Outlets, Prewired Conduit 70-799-09
AVTrac 1AC EU Central Europe Outlet, Isolated Cable 70-799-03
AVTrac 1AC FR France Outlet, Isolated Cable 70-799-04
AVTrac 1AC AUS Australia Outlet, Conduit Only 70-799-05
AVTrac 1AC UNIV ISO Universal Outlet, Isolated Cable 70-799-06
AVTrac 1AC UNIV CO Universal Outlet, Conduit Only 70-799-07
GENERAL (Cont.) Connectivity box.......................................... 3.55" H x 10" W x 4.91" D
(9.0 cm H x 25.4 cm W x 12.5 cm D) Product weight Parts in package 1 of 2 ............................... 16.9 lbs (7.7 kg) Parts in package 2 of 2 ............................... 10.6 lbs (4.8 kg)Shipping weight Package 1 of 2 ........................................... 22 lbs (10 kg) Package 2 of 2 ........................................... 13 lbs (6 kg)Vibration ........................................................ ISTA 1A in carton (International Safe Transit Association)Regulatory complianceSafety ............................................................ CE (international models), CUL, UL (US models)Accessibility ................................................... Title III, Regulation 28 CFR Part 36: ADA Standards for
Accessible Design; Section 4.8: RampsWarranty ........................................................ 3 years parts and labor