avk butterfly valve brochure

44
Whatever you need Butterfly valves for water AVK INTERNATIONAL A/S

Upload: loginname400

Post on 01-Dec-2015

282 views

Category:

Documents


11 download

DESCRIPTION

AVK Butterfly Valve Brochure

TRANSCRIPT

Page 1: AVK Butterfly Valve Brochure

W h a t eve r yo u n e e d

B u t t e r f l y v a l ve s f o r w a t e r

A V K I N T E R N A T I O N A L A / S

Page 2: AVK Butterfly Valve Brochure

2 | Butterfly valves for drinking water

When qual i t y counts, you can count

on products from AVK!

It’s all about qualityAVK has put a lot of effort in

optimization of even the smallest design detail.

On top of that a superiour corrosion resistance, an

excellent disc sealing and a uniform production quality are

the characteristics of AVK butterfly valves.

Page 3: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 3

Complete assor tment for water t reatment ,

distr ibut ion and transmission

Introduction, coating and rubber quality 4-7

Double eccentric butterfly valves 8-17

Centric butterfly valves with fixed liner 18-25

Centric butterfly valves with loose liner 26-38

Technical appendix 38-43

Page 4: AVK Butterfly Valve Brochure

4 | Butterfly valves for drinking water

Extensive range of butterfly valves

AVK was founded in 1969 and in the first years we focused on gate valves. From the 90s we started offering butterfly

valves. AVK became distributor of centric fixed liner butterfly valves from Wouter Witzel, a well-esteemed manufacturer

founded in 1966 in the Netherlands and since 2005 a member of the AVK Group.

The same year AVK introduced a brand new range of double eccentric butterfly valves. DN 1400-2200 were added to the

range a few years ago and are manufactured at Glenfield in the UK, the AVK Group specialist in large diameter valves.

In 2008 AVK acquired World Valve, a small manufacturer strong within customized butterfly valves.

In 2010 InterApp Armaturen Holding AG became member of the AVK Group. InterApp was founded in 1969 and is a

well reputed manufacturer of centric loose liner butterfly valves produced in Spain and Switzerland. Today approx.

3,000 people in the AVK group are doing their utmost to ensure that AVK remains one of the world’s leading valve

manufacturers for water, sewage, gas and fire protection applications.

The AVK Group is renowned worldwide

for qual i t y and rel iabi l i t y

Page 5: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 5

The AVK Group is renowned worldwide

for qual i t y and rel iabi l i t y

Global presence and delivery service

To brand and sell AVK’s comprehensive product

assortment, the AVK Group is present in more

than 85 countries worldwide. Sales and distribution

are handled by AVK sales companies, agents and

distributors.

We value the importance of local customers being

serviced by local sales organisations. It enables us

to provide a great service to our end users located

around the world. Furthermore, it is crucial for

our continued development that we maintain the

proximity to our end users. Only by listening to our

customers, we will be able to keep living up to the

market expectations.

Quality is a rule of conduct in our supply chain

AVK valves are manufactured in modern factories

characterised by lean production and a high

degree of automation. We are entirely committed to

ensuring that quality remains an integrated part of

our production flow. Throughout the processes, a

number of tests and quality controls are meticulously

carried out to safeguard the durability and operational

reliability of our products. Our quality assurance

system is of course certified according to the ISO

9001 standards.

There is always an AVK company

or an AVK par tner near you

Page 6: AVK Butterfly Valve Brochure

6 | Butterfly valves for drinking water

Internal and external epoxy coating to DIN 30677-2 and GSK guidelines

All castings are blast cleaned according to ISO 12944-4. Any unevenness of the product surface is cleaned to provide

perfect adhesion of the coating. The epoxy is electrostatically applied in a closed booth, where the powder melts and

cures in contact with the preheated component. Thorough control measures ensure optimum corrosion protection. Our

double eccentric butterfly valves from DN 1400 come with a two-pack epoxy, and our centric butterfly valves with loose

liner in DN 450 and above are supplied with a 250 my polyurethane coating.

State-of-the-ar t rubber technology

gives highest safety

Corrosion protect ion in compliance

with tough requirements

Page 7: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 7

Excellent ability to regain original shape

AVK GUMMI A/S has a special focus on the

compression set value, meaning the ability to regain

original shape. Even after many years of service

where the rubber has been compressed numerous

times, it will regain its original shape and ensure a

tight sealing. Impurities will not affect the rubber

surface or the tightness of the valve, as the impurities

will be absorbed in the rubber when the valve is in

closed position.

Furthermore, the rubber recipes are composed with

focus on minimising the formation of biofilm to

prevent the rubber from forming breeding ground

for bacteria.

Traceability and durability in focus

The rubber materials for liners and sealings are

developed and manufactured by AVK GUMMI A/S

with the use of highly advanced technologies.

Data is constantly collected throughout the entire

manufacturing process and this secures traceability

of every individual ingredient, each compound, and

the finalised components. A number of tests are

carried out to make sure that the compression set

values, the tensile strength and the resistance to

water treatment chemicals meet the predefined

requirements.

State-of-the-ar t rubber technology

gives highest safety

Corrosion protect ion in compliance

with tough requirements

Page 8: AVK Butterfly Valve Brochure

8 | Butterfly valves for drinking water

Double eccentr ic but ter f ly valves

for buried service

Tilted and fixated disc extends service life and eases operation

The tension on the disc is released after a few degrees of opening which gives only insignificant wear

of the disc seal. Furthermore, the design minimises the compression of the sealing which ensures

low operating torques. The disc is fixated with two set screws to prevent wear of the keyway and

thus to avoid fluttering caused by flow velocity and play in the key and keyway connection. In larger

dimensions the disc is fixated with two stainless steel drive dowels, with key and keyway as back-up.

The dowels are mounted with press fit leaving no play between disc and shaft.

Double eccentric principleThe shaft is placed offset the centre line in both directions. Eccentricity relates to the centre of the pipeline. Double eccentricity relates to the valve centre (approx. 3-5 mm). The disc swings open/closed like a door.

Do

ub

le e

cc

en

tric

Page 9: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 9

Pick your favourite seat

and disc design

Disc seal optimised for high performance

The disc seal is shaped to secure fixation in correct

position providing a very reliable function. The

excellent rubber quality makes it possible to reduce

the amount of rubber which results in low closing

torques. The EPDM sealing is of course approved by

DVGW, KIWA and WRAS.

The stainless steel retainer ring keeps the disc seal

in place. It is fixed by stainless steel bolts coated

with precoat 80 to prevent loosening. The threaded

bolt holes in the disc are corrosion protected with

O-rings.

Two seat designs

AVK offers double eccentric butterfly valves with

two different seat designs. The integral seat design

has a machined and epoxy coated ductile iron seat

integrated in the body. The stainless steel seat design

has a replaceable seat ring of stainless steel sealed

with an O-ring. For DN 200-600 valves the ring is

pressed into the body, and for larger dimensions the

ring is fixed with bolts sealed with epoxy.

Two disc designs

Two different disc designs - plate design and flow-

through design - are available to meet all market

requirements worldwide.

Flow-through designThis design is less sensitive to cavitation at high flow velocities. The design is available for DN 700-1200 butterfly valves.

Page 10: AVK Butterfly Valve Brochure

10 | Butterfly valves for drinking water

Superiour corrosion protect ion

to the core

Design of ≥DN 700The shaft ends are fully encapsulated in the disc and are fixed with dowels. There are two O-rings on each dowel, which are protected with a stainless steel plate fixed with stainless steel bolts.

Protected shaft end zones secure durability

There are no uncoated ductile iron surfaces exposed to the media. In

DN 200-600 the shaft ends are protected with stainless steel plates

with gaskets. After mounting and successful pressure test, an extra

layer of epoxy coating seals the steel plates. In larger dimensions the

shaft ends are fully encapsulated in the disc and fixed to the disc with

dowels. The low friction PTFE shaft bearings ensure low operating

torques for the complete range.

The safe choice with bui l t- in

user benef its

Do

ub

le e

cc

en

tric

Page 11: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 11

The safe choice with bui l t- in

user benef its

Replaceable shaft sealing and optional locking

The shaft sealing is replaceable under pressure to

enable easy maintenance. Sealings of EPDM secure

tightness from inside and out, and NBR sealings

protect against impurities from outside.

•DN 200-600: An EPDM O-ring on a stainless steel

ring, a back-up EPDM O-ring in the housing, a flat

EPDM gasket, and an NBR O-ring.

•DN 700-2400: Two EPDM O-rings on each side of

the bronze bushing, and a flat NBR gasket.

We offer an optional locking device which makes it

possible to lock the disc in open/closed position.

In addition to all the design features and benefits, we

have minimised the weight to make handling easier

and to put less strain on the environment.

The valves are bi-directional even though valves

from DN 700 and up are marked with an arrow

indicating the preferred flow direction. The hydraulic

test is always done from both directions according to

EN 1074-1 and 2 / EN 12266.

AVK can offer any type of actuation. Our standard

options are IP67 gearboxes with handwheel for

above ground installation, IP68 gearboxes for buried

service, and ISO-input gearboxes for mounting of

electrical actuators. Furthermore, we offer extension

stems, adaptors and handwheels.

The valves are approved by DVGW, KIWA and WRAS

up to DN 1200. For larger dimensions all components

are approved.

Page 12: AVK Butterfly Valve Brochure

12 | Butterfly valves for drinking water

Double eccentric butterfly valve, for water to max. 70° C. Face to face according to EN 558 table 2 basic series 14. Standard flange drilling to EN1092-2 (ISO 7005-2). Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved according to DIN-DVGW Certificate NW-6201BR0451.

Double eccentric butterfly valve designed according to EN 593. Double flanged long type with plate disc, integral seat and IP 67 gearbox with handwheel. Soft seated with NF approved EPDM sealing, alternatively with WRAS approved sealing. Seal retainer ring of stainless steel stainless steel AISI 420. Body and disc of ductile iron GJS-400-7/10 (GGG-40) with epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. Shaft of stainless steel AISI 431 with double O-rings and alubronze bearings and bushings, and stainless steel screws for fixing the keys.

AVK DOuBLE ECCENTRIC BuTTERfLy VALVE 756/100Integral seat, IP 67 gearbox with handwheel, Nf approved sealing, DN 200-600

1. Key2. Valve shaft3. Headed bush4. Set screws

5. Gasket6. Cover7. Disc8. O-ring

9. Retainer ring10. Disc seal11. Body12. Headed bush

13. Shaft14. Gasket15. O-ring16. Screw

17. End cover18. Thrust plate19. O-rings20. Screw

H2W2

W1

W5

D

AA

L

1

2

3

4

5

6

7

11

12

13

10

9

8 L1

L2

W3

W414

15

16

17

18

19

20

DN PN D L L1 L2 H2 W1 W2 W3 W4 W5 Theoretical AVK ref. nos. mm drilling mm mm mm mm mm mm mm mm mm mm weight kg

756-0200-1-06 200 10 250 230 - - 200 182 279 - - 276 51756-0200-1-16 200 16 250 230 - - 200 182 279 - - 276 51756-0250-1-06 250 10 250 250 - 1 234 215 313 - 6 276 71756-0250-1-16 250 16 250 250 - 1 234 215 313 - 6 276 71756-0300-1-06 300 10 250 270 1 12 264 242 343 6 104 276 100756-0300-1-16 300 16 400 270 1 12 264 242 343 6 104 306 106756-0350-1-06 350 10 250 290 20 26 290 272 369 151 173 276 128756-0350-1-16 350 16 400 290 20 26 290 272 369 151 173 306 134756-0400-1-06 400 10 400 310 35 41 321 302 403 215 232 306 166756-0400-1-16 400 16 400 310 35 41 321 302 403 215 232 306 166756-0450-1-06 450 10 400 330 48 55 358 332 440 267 284 306 211756-0450-1-16 450 16 500 330 48 55 358 332 440 267 284 416 219756-0500-1-06 500 10 400 350 63 69 386 338 468 322 335 306 206756-0500-1-16 500 16 500 350 63 69 395 370 477 322 335 416 282756-0600-1-06 600 10 500 390 94 100 445 393 536 426 437 416 285756-0600-1-16 600 16 600 390 94 100 467 435 556 426 437 456 425

Do

ub

le e

cc

en

tric

Page 13: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 13

Double eccentric butterfly valve, for water to max. 70° C.Face to face according to EN 558 table 2 basic series 14. Standard flange drilling to EN1092-2 (ISO 7005-2)Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved for drinking water.

Double eccentric butterfly valve designed according to EN 593. Double flanged long type with plate disc, integral seat and IP67 gearbox with handwheel. Soft seated with WRAS approved sealing, alternatively with DVGW/KTW approved sealing. Seal retainer ring of stainless steel AISI 420/304. Body and disc of ductile iron GJS-500-7, ref EN1563. Shaft of stainless steel AISI 431 with double O-rings, self-lubricating bearings, bronze bushings, and four stainless steel drive dowels connecting the shaft to the disc. Extra key mounted as backup. Fasteners of stainless steel grade A2. Epoxy coating: DN 700-1200: Fusion bonded epoxy to DIN 30677-2 and GSK guidelines RAL5017, internally and externally, according to WRAS-DVGW/W270/UBA, 250 microns. DN 1400-2400: Two pack epoxy RAL 5017 externally and ribbon blue code BS-18-E-50 to BS 4800 internally according to WRAS, 250 microns.

DN PN D L L1 L2 H2 W1 W2 W3 W4 W5 Theoretical AVK ref. nos. mm drilling mm mm mm mm mm mm mm mm mm mm weight kg

756-0700-1-04 700 10 700 430 127 133 550 448 641 533 543 449 444756-0700-1-14 700 16 700 430 127 133 550 455 641 533 543 449 523756-0800-1-04 800 10 700 470 156 162 620 508 711 627 636 449 592756-0800-1-14 800 16 700 470 156 162 620 513 711 627 636 449 669756-0900-1-04 900 10 700 510 186 192 690 558 791 722 730 499 751756-0900-1-14 900 16 700 510 186 192 690 563 791 722 730 499 881756-1000-1-04 1000 10 700 550 216 222 770 615 871 816 824 499 995756-1000-1-14 1000 16 700 550 216 222 770 628 871 816 824 499 1120756-1200-1-04 1200 10 700 630 269 275 855 728 956 986 993 581 1449756-1200-1-14 1200 16 700 630 269 275 855 743 956 986 993 581 1683756-1400-1-04 1400 10 700 710 333 339 970 838 1071 1182 1189 550 2166756-1400-1-14 1400 16 700 710 333 339 970 843 1119 1182 1189 571 2477756-1500-1-04 1500 10 700 750 363 369 1070 893 1171 1274 1281 550 2622756-1500-1-14 1500 16 700 750 363 369 1070 913 1219 1274 1281 571 3006756-1600-1-04 1600 10 700 790 390 396 1145 958 1294 1359 1366 571 3192756-1600-1-14 1600 16 700 790 390 396 1145 965 1294 1359 1366 606 3473756-1800-1-04 1800 10 700 870 448 454 1220 1058 1369 1540 1547 606 3799756-1800-1-14 1800 16 700 870 448 454 1220 1065 1398 1540 1547 721 4217756-2000-1-04 2000 10 700 950 521 527 1382 1180 1547 1753 1760 686 5287756-2000-1-14 2000 16 700 950 521 527 1382 1180 1560 1753 1760 747 5755756-2200-1-04 2200 10 700 1030 576 582 1472 1275 1650 1926 1932 721 6534756-2200-1-14 2200 16 700 1030 576 582 1482 1278 1641 1926 1932 764 8760756-2400-1-04 2400 10 700 1110 676 682 1584 1382 1753 2126 2132 747 11500756-2400-1-14 2400 16 700 1110 676 682 1584 1382 1753 2126 2132 764 11520

1. Key2. Valve shaft3. Seal housing4. O-rings

5. Bearing6. Body 7. Disc 8. Security plate

9. Screws 10. Drive dowel 11. Screw 12. O-ring

13. Bolt14. O-ring15. Retainer ring16. Disc seal

17. Axial bearing18. End plate19. Stub shaft20. Safety key

AVK DOuBLE ECCENTRIC BuTTERfLy VALVE, 756/100Integral seat, IP 67 gearbox with handwheel, WRAS approved sealing, DN 700-2400

L

1

2

3

4

5

6

7

8

9

10

161514

SECTION C

1112

13

SECTION D

19 20

18

17

4

W2

W1

H2

D

W5

C

C

D

D

W3

L1

L2

W4

Page 14: AVK Butterfly Valve Brochure

14 | Butterfly valves for drinking water

Double eccentric butterfly valve, for water to max. 70° C. Face to face according to EN 558 table 2 basic series 14. Standard flange drilling to EN1092-2 (ISO 7005-2). Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved according to DIN-DVGW Certificate NW-6201BR0451 and KIWA Certificate K 6320/07.

Double eccentric butterfly valve designed according to EN 593. Double flanged long type with plate disc, stainless steel seat and IP 67 gearbox with handwheel. Soft seated with DVGW/KTW approved EPDM sealing, alternatively with WRAS approved sealing. Seat ring and seal retainer ring of stainless steel AISI 420. Body and disc of ductile iron GJS-400-7/10 (GGG-40) with epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally. Shaft of stainless steel AISI 431 with double O-rings and alubronze bearings and bushings, and stainless steel screws for fixing the keys.

AVK DOuBLE ECCENTRIC BuTTERfLy VALVE 756/100Stainless steel seat, IP 67 gearbox with handwheel, DVGW approved sealing, DN 200-600

DN PN D L L1 L2 H2 W1 W2 W3 W4 W5 Theoretical AVK ref. nos. mm drilling mm mm mm mm mm mm mm mm mm mm weight kg

756-0200-1-0700009 200 10 250 230 - - 200 182 279 - - 276 51756-0200-1-1700009 200 16 250 230 - - 200 182 279 - - 276 51756-0250-1-0700009 250 10 250 250 - 1 234 215 313 - 6 276 71756-0250-1-1700009 250 16 250 250 - 1 234 215 313 - 6 276 71756-0300-1-0700009 300 10 250 270 1 12 264 242 343 6 104 276 100756-0300-1-1700009 300 16 400 270 1 12 264 242 343 6 104 276 106756-0350-1-0700009 350 10 250 290 20 26 290 272 369 151 173 276 128756-0350-1-1700009 350 16 400 290 20 26 290 272 369 151 173 276 134756-0400-1-0700009 400 10 400 310 35 41 321 302 403 215 232 306 166756-0400-1-1700009 400 16 400 310 35 41 321 302 403 215 232 306 166756-0450-1-0700009 450 10 400 330 48 55 358 332 440 267 284 306 211756-0450-1-1700009 450 16 500 330 48 55 358 332 440 267 284 306 219756-0500-1-0700009 500 10 400 350 63 69 386 338 468 322 335 306 206756-0500-1-1700009 500 16 500 350 63 69 395 370 477 322 335 306 282756-0600-1-0700009 600 10 500 390 94 100 445 393 536 426 437 416 285756-0600-1-1700009 600 16 600 390 94 100 467 435 556 426 437 416 425

1. Key2. Valve shaft3. Headed bush4. Set screws

5. Gasket6. Cover7. Disc8. O-ring

9. Retainer ring10. Disc seal11. Body12. Headed bush

13. Shaft14. Gasket15. O-ring16. Screw

17. End cover18. Thrust plate19. O-ring20. Seat ring

21. O-ring22. Screw

H2W2

W1

W5

D

AA

L

1

2

3

4

5

6

7

11

12

13

10

9

8 L1

L2

W3

W414

10

21

9 7 8

2219 20

15

16

17

18

19

20

Do

ub

le e

cc

en

tric

Page 15: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 15

Double eccentric butterfly valve, for water to max. 70° C.Face to face according to EN 558 table 2 basic series 14. Standard flange drilling to EN1092-2 (ISO 7005-2)Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved for drinking water.

Double eccentric butterfly valve designed according to EN 593. Double flanged long type with plate disc, stainless steel seat ring and IP67 gearbox with handwheel. Soft seated with DVGW/KTW approved sealing, alternatively with WRAS approved sealing. Seat ring and seal retainer ring of stainless steel AISI 420/304. Shaft of stainless steel AISI 431 with double O-rings, self-lubricating bearings, bronze bushings, and four stainless steel drive dowels connecting the shaft to the disc. Extra key mounted as backup. Fasteners of stainless steel grade A2. Epoxy coating: DN 700-1200: Fusion bonded epoxy to DIN 30677-2 and GSK guidelines RAL5017, internally and externally, according to WRAS-DVGW/W270/UBA, 250 microns. DN 1400-2400: Two pack epoxy RAL 5017 externally and ribbon blue or cream white internally according to WRAS, 250 microns.

DN PN D L L1 L2 H2 W1 W2 W3 W4 W5 Theoretical AVK ref. nos. mm drilling mm mm mm mm mm mm mm mm mm mm weight kg

756-0700-1-0700009 700 10 700 430 127 133 550 448 641 533 543 449 444756-0700-1-1700009 700 16 700 430 127 133 550 455 641 533 543 449 523756-0800-1-0700009 800 10 700 470 156 162 620 508 711 627 636 449 592756-0800-1-1700009 800 16 700 470 156 162 620 513 711 627 636 449 669756-0900-1-0700009 900 10 700 510 186 192 690 558 791 722 730 499 751756-0900-1-1700009 900 16 700 510 186 192 690 563 791 722 730 499 881756-1000-1-0700009 1000 10 700 550 216 222 770 615 871 816 824 499 995756-1000-1-1700009 1000 16 700 550 216 222 770 628 871 816 824 499 1120756-1200-1-0700009 1200 10 700 630 269 275 855 728 956 986 993 581 1449756-1200-1-1700009 1200 16 700 630 269 275 855 743 956 986 993 581 1683756-1400-1-0700009 1400 10 700 710 333 339 970 838 1071 1182 1189 550 2166756-1400-1-1700009 1400 16 700 710 333 339 970 843 1119 1182 1189 571 2477756-1500-1-0700009 1500 10 700 750 363 369 1070 893 1171 1274 1281 550 2622756-1500-1-1700009 1500 16 700 750 363 369 1070 913 1219 1274 1281 571 3006756-1600-1-0700009 1600 10 700 790 390 396 1145 958 1294 1359 1366 571 3192756-1600-1-1700009 1600 16 700 790 390 396 1145 965 1294 1359 1366 606 3473756-1800-1-0700009 1800 10 700 870 448 454 1220 1058 1369 1540 1547 606 3799756-1800-1-1700009 1800 16 700 870 448 454 1220 1065 1398 1540 1547 721 4217756-2000-1-0700009 2000 10 700 950 521 527 1382 1180 1547 1753 1760 686 5287756-2000-1-1700009 2000 16 700 950 521 527 1382 1180 1560 1753 1760 747 5755756-2200-1-0700009 2200 10 700 1030 576 582 1472 1275 1650 1926 1932 721 6534756-2200-1-1700009 2200 16 700 1030 576 582 1482 1278 1641 1926 1932 764 8760756-2400-1-0700009 2400 10 700 1110 676 682 1584 1382 1753 2126 2132 747 11500 756-2400-1-1700009 2400 16 700 1110 676 682 1584 1382 1753 2126 2132 764 11520

AVK DOuBLE ECCENTRIC BuTTERfLy VALVE 756/100Stainless steel seat, IP 67 gearbox with handwheel, DVGW approved sealing, DN 700-2400

1. Key2. Valve shaft3. Seal housing4. O-rings

5. Bearing6. Body 7. Disc 8. Security plate

9. Screws 10. Drive dowel 11. Screw 12. O-ring

13. Bolt14. Screw15. O-rings16. Retainer ring

17. Seat ring18. Disc seal19. Axial bearing20. End plate

21. Stub shaft22. Safety key

L

1

2

3

4

5

6

7

8

9

10

15 17 181614

SECTION C

111213

SECTION D

21 22

20

19

4

W2

W1

H2

D

W5

C

C

D

D

W3

L1

L2

W4

Page 16: AVK Butterfly Valve Brochure

16 | Butterfly valves for drinking water

DN PN AVK ref. nos. AVK ref. nos. mm drilling Integral seat Stainless steel seat NF approved sealing DVGW/KTW approved sealing

200 10 756-0200-1-06006 756-0200-1-0700609 200 16 756-0200-1-16006 756-0200-1-1700609 250 10 756-0250-1-06006 756-0250-1-0700609 250 16 756-0250-1-16006 756-0250-1-1700609 300 10 756-0300-1-06006 756-0300-1-0700609 300 16 756-0300-1-16006 756-0300-1-1700609 350 10 756-0350-1-06006 756-0350-1-0700609 350 16 756-0350-1-16006 756-0350-1-1700609 400 10 756-0400-1-06006 756-0400-1-0700609 400 16 756-0400-1-16006 756-0400-1-1700609 450 10 756-0450-1-06006 756-0450-1-0700609 450 16 756-0450-1-16006 756-0450-1-1700609 500 10 756-0500-1-06006 756-0500-1-0700609 500 16 756-0500-1-16006 756-0500-1-1700609 600 10 756-0600-1-06006 756-0600-1-0700609 600 16 756-0600-1-16006 756-0600-1-1700609

AVK DOuBLE ECCENTRIC BuTTERfLy VALVES 756/106With IP 68 gearbox for buried service

DN PN AVK ref. nos. AVK ref. nos. AVK ref. nos AVK ref. nos mm drilling Integral seat Integral seat Stainless steel seat Stainless steel seat WRAS approved sealing DVGW/KTW approved sealing WRAS approved sealing DVGW/KTW approved sealing

700 10 756-0700-1-04006 756-0700-1-07006 756-0700-1-0400609 756-0700-1-0700609 700 16 756-0700-1-14006 756-0700-1-17006 756-0700-1-1400609 756-0700-1-1700609 800 10 756-0800-1-04006 756-0800-1-07006 756-0800-1-0400609 756-0800-1-0700609 800 16 756-0800-1-14006 756-0800-1-17006 756-0800-1-1400609 756-0800-1-1700609 900 10 756-0900-1-04006 756-0900-1-07006 756-0900-1-0400609 756-0900-1-0700609 900 16 756-0900-1-14006 756-0900-1-17006 756-0900-1-1400609 756-0900-1-1700609 1000 10 756-1000-1-04006 756-1000-1-07006 756-1000-1-0400609 756-1000-1-0700609 1000 16 756-1000-1-14006 756-1000-1-17006 756-1000-1-1400609 756-1000-1-1700609 1200 10 756-1200-1-04006 756-1200-1-07006 756-1200-1-0400609 756-1200-1-0700609 1200 16 756-1200-1-14006 756-1200-1-17006 756-1200-1-1400609 756-1200-1-1700609 1400 10 756-1400-1-04006 756-1400-1-07006 756-1400-1-0400609 756-1400-1-0700609 1400 16 756-1400-1-14006 756-1400-1-17006 756-1400-1-1400609 756-1400-1-1700609 1500 10 756-1500-1-04006 756-1500-1-07006 756-1500-1-0400609 756-1500-1-0700609 1500 16 756-1500-1-14006 756-1500-1-17006 756-1500-1-1400609 756-1500-1-1700609 1600 10 756-1600-1-04006 756-1600-1-07006 756-1600-1-0400609 756-1600-1-0700609 1600 16 756-1600-1-14006 756-1600-1-17006 756-1600-1-1400609 756-1600-1-1700609 1800 10 756-1800-1-04006 756-1800-1-07006 756-1800-1-0400609 756-1800-1-0700609 1800 16 756-1800-1-14006 756-1800-1-17006 756-1800-1-1400609 756-1800-1-1700609 2000 10 756-2000-1-04006 756-2000-1-07006 756-2000-1-0400609 756-2000-1-0700609 2000 16 756-2000-1-14006 756-2000-1-17006 756-2000-1-1400609 756-2000-1-1700609 2200 10 756-2200-1-04006 756-2200-1-07006 756-2200-1-0400609 756-2200-1-0700609 2200 16 756-2200-1-14006 756-2200-1-17006 756-2200-1-1400609 756-2200-1-1700609 2400 10 756-2400-1-04006 756-2400-1-07006 756-2400-1-0400609 756-2400-1-0700609 2400 16 756-2400-1-14006 756-2400-1-17006 756-2400-1-1400609 756-2400-1-1700609

Do

ub

le e

cc

en

tric

Page 17: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 17

DN PN ISO 5210 AVK ref. nos. AVK ref. nos. mm drilling flange Integral seat Stainless steel seat NF approved sealing DVGW/KTW approved sealing

200 10 F10 756-0200-1-06002 756-0200-1-0700209 200 16 F10 756-0200-1-16002 756-0200-1-1700209 250 10 F10 756-0250-1-06002 756-0250-1-0700209 250 16 F10 756-0250-1-16002 756-0250-1-1700209 300 10 F10 756-0300-1-06002 756-0300-1-0700209 300 16 F10 756-0300-1-16002 756-0300-1-1700209 350 10 F10 756-0350-1-06002 756-0350-1-0700209 350 16 F10 756-0350-1-16002 756-0350-1-1700209 400 10 F10 756-0400-1-06002 756-0400-1-0700209 400 16 F10 756-0400-1-16002 756-0400-1-1700209 450 10 F10 756-0450-1-06002 756-0450-1-0700209 450 16 F14 756-0450-1-16002 756-0450-1-1700209 500 10 F10 756-0500-1-06002 756-0500-1-0700209 500 16 F14 756-0500-1-16002 756-0500-1-1700209 600 10 F14 756-0600-1-06002 756-0600-1-0700209 600 16 F14 756-0600-1-16002 756-0600-1-1700209

AVK DOuBLE ECCENTRIC BuTTERfLy VALVES 756/102With ISO-input gearbox

DN PN ISO 5210 AVK ref. nos. AVK ref. nos. AVK ref. nos AVK ref. nos mm drilling flange Integral seat Integral seat Stainless steel seat Stainless steel seat WRAS approved sealing DVGW/KTW approved sealing WRAS approved sealing DVGW/KTW approved sealing

700 10 F10 756-0700-1-04002 756-0700-1-07002 756-0700-1-0400209 756-0700-1-0700209 700 16 F10 756-0700-1-14002 756-0700-1-17002 756-0700-1-1400209 756-0700-1-1700209 800 10 F10 756-0800-1-04002 756-0800-1-07002 756-0800-1-0400209 756-0800-1-0700209 800 16 F10 756-0800-1-14002 756-0800-1-17002 756-0800-1-1400209 756-0800-1-1700209 900 10 F10 756-0900-1-04002 756-0900-1-07002 756-0900-1-0400209 756-0900-1-0700209 900 16 F10 756-0900-1-14002 756-0900-1-17002 756-0900-1-1400209 756-0900-1-1700209 1000 10 F10 756-1000-1-04002 756-1000-1-07002 756-1000-1-0400209 756-1000-1-0700209 1000 16 F10 756-1000-1-14002 756-1000-1-17002 756-1000-1-1400209 756-1000-1-1700209 1200 10 F10 756-1200-1-04002 756-1200-1-07002 756-1200-1-0400209 756-1200-1-0700209 1200 16 F10 756-1200-1-14002 756-1200-1-17002 756-1200-1-1400209 756-1200-1-1700209 1400 10 F10 756-1400-1-04002 756-1400-1-07002 756-1400-1-0400209 756-1400-1-0700209 1400 16 F10 756-1400-1-14002 756-1400-1-17002 756-1400-1-1400209 756-1400-1-1700209 1500 10 F10 756-1500-1-04002 756-1500-1-07002 756-1500-1-0400209 756-1500-1-0700209 1500 16 F10 756-1500-1-14002 756-1500-1-17002 756-1500-1-1400209 756-1500-1-1700209 1600 10 F10 756-1600-1-04002 756-1600-1-07002 756-1600-1-0400209 756-1600-1-0700209 1600 16 F14 756-1600-1-14002 756-1600-1-17002 756-1600-1-1400209 756-1600-1-1700209 1800 10 F14 756-1800-1-04002 756-1800-1-07002 756-1800-1-0400209 756-1800-1-0700209 1800 16 F14 756-1800-1-14002 756-1800-1-17002 756-1800-1-1400209 756-1800-1-1700209 2000 10 F14 756-2000-1-04002 756-2000-1-07002 756-2000-1-0400209 756-2000-1-0700209 2000 16 F14 756-2000-1-14002 756-2000-1-17002 756-2000-1-1400209 756-2000-1-1700209 2200 10 F14 756-2200-1-04002 756-2200-1-07002 756-2200-1-0400209 756-2200-1-0700209 2200 16 F10 756-2200-1-14002 756-2200-1-17002 756-2200-1-1400209 756-2200-1-1700209 2400 10 F10 756-2400-1-04002 756-2400-1-07002 756-2400-1-0400209 756-2400-1-0700209 2400 16 F14 756-2400-1-14002 756-2400-1-17002 756-2400-1-1400209 756-2400-1-1700209

Page 18: AVK Butterfly Valve Brochure

18 | Butterfly valves for drinking water

Centr ic but ter f ly valves

with f ixed l iner

Outstanding seating concept is the heart of the valve performance

Wouter Witzel EuroValve is one of very few manufacturers of butterfly valves with fixed liner. The rubber

is injection moulded directly on the valve body forming a permanent bond with an optimal rubber

shore hardness. Consequently, there is no risk of deformation or dislocation of the liner making the

valves suitable under vacuum conditions. The disc has a profiled sealing edge which requires minimal

deformation of the liner to achieve a tight sealing. This gives less wear of the liner and low operating

torques. Therefore, the butterfly valves are the ultimate choice for applications with high operation

frequency.

Tightness even after thousands of operation cyclesThe combination of a profiled disc and the unique AVK rubber compound secures a great durability. The rubber compound has an excellent ability to regain shape after compression, and the profiled disc requires minimal deformation of the liner.

Overal l cost ef f ic iency with

high qual i t y valves

Ce

ntr

ic,

fixe

d l

ine

r

Page 19: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 19

Overal l cost ef f ic iency with

high qual i t y valves

Low operating torques enable lower total costs

Wouter Witzel EuroValve butterfly valves are a cost

effective choice, especially when it comes to large

diameter valves with actuators.

The fixed liner combined with the profiled disc and

the shaft bearings result in low operating torques.

This makes it possible to use a smaller actuator, and

since the cost of the valve is insignificant compared

to the cost of the actuator, there is no sound reason

for compromising on the valve quality.

Streamlined disc results in low energy costs

The streamlined disc shape results in low flow

resistance when the valve is open. Therefore, the

valves will not cause any turbulence, pressure drops

or valve vibration, and will reduce energy costs for

the user. The saving of energy costs may be several

times the initial cost of the valve.

Valve design based on in-depth knowledge

The disc is fixed to the shaft with a conical pin. Both

shafts are provided with self-lubricating bearings of

PTFE coated steel which contribute to low operating

torques. At the valve top a bronze bushing with

O-ring seals against impurities from outside.

The butterfly valves are approved by DVGW, KIWA,

WRAS and SVGW.

Page 20: AVK Butterfly Valve Brochure

20 | Butterfly valves for drinking water

Butterfly valve to EN 593, for water to max. 70° C. Face to face according to EN 558 table 5 basic series 20. End connection to EN 1092-2 PN 6/10/16, ASME B16.5 Cl. 150.Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved according to DIN-DVGW Certificate NW-6201AP2412 and KIWA Certificate K 6070/05.

Centric wafer butterfly valve with fixed EPDM rubber liner.Body of ductile iron JL1030/GJS-400-15 (GGG-40) coated with 200 my epoxy coating blue RAL 5017. DN ≤200: Disc, shaft and conical pin of duplex steel. DN ≥250: Disc of rilsan coated ductile iron, shaft and conical pin of stainless steel. Top and bottom bearings of steel with PTFE coating. Top shaft sealing DN ≤350: Bronze bushing with two EPDM O-rings, DN ≥400: EPDM O-ring in bushing fixed with countersunk screws of galvanized steel. Bottom shaft sealing: DN ≤350: Plug of galvanized steel with a copper sealing ring, DN ≥400: Axial bearing, ring of alubronze and an EPDM O-ring, protected by a cover plate of galvanized steel.

AVK WAfER BuTTERfLy VALVE, PN 10/16 75/10Centric with fixed liner

AVK BUTTERFLY VALVE PN 10 OR PN 16 75/10

Component list

1. Shaft 7. Disc 13. Screw2. Bushing 8. Shaft 14. Ring3. O-ring 9. Lining 15. O-ring4. Body 10. Bearing 16. Axial bearing5. Bearing 11. Sealing ring 17. Cover plate6. Conical pin 12. Plug 18. Screw

Top flangeA B C D E F G H J K L ds Weight

Ref. nos. DN mm mm mm mm mm mm mm mm mm mm mm mm Holes SO 5211 kilos

75-040-101041009 40 40 85 33 58 113 12 34 10 18 70 90 9 4 F07 2.575-050-101041009 50 50 100 43 63 118 12 34 10 18 70 90 9 4 F07 2.675-065-101041009 65 65 115 46 71 126 12 34 10 18 70 90 9 4 F07 3.275-080-101041009 80 80 130 46 78 133 12 34 10 18 70 90 9 4 F07 3.575-100-101041009 100 100 150 52 96 147 12 34 12 22 70 90 9 4 F07 4.575-125-101041009 125 125 182 56 109 160 12 34 12 22 70 90 9 4 F07 6.375-150-101041009 150 150 210 56 133 180 14 34 16 30 70 90 9 4 F07 8.875-200-101040009 200 200 262 60 158 204 14 34 16 30 70 90 9 4 F07 13.275-250-101040009 250 250 315 68 194 245 15 45 24 38 102 125 11 4 F10 22.075-300-101040009 300 300 371 78 219 270 15 45 24 38 102 125 11 4 F10 32.075-350-101240009 350 336 405 78 256 315 15 45 24 38 102 125 11 4 F10 40.075-400-101240009 400 386 470 102 308 363 25 50 30 90 140 175 17 4 F14 75.075-450-101240009 450 436 522 114 334 388 25 50 30 90 140 175 17 4 F14 90.075-500-101240009 500 486 576 127 360 413 25 50 30 90 140 175 17 4 F14 120.075-600-101240009 600 586 672 154 426 510 25 50 40 100 140 175 17 4 F14 180.075-700-101240009 700 686 776 165 480 560 25 60 46 110 165 210 21 4 F16 295.075-750-101240009 750 736 826 190 520 585 25 60 46 110 165 210 21 4 F16 325.075-800-101240009 800 786 880 190 525 610 25 60 46 110 165 210 21 4 F16 345.075-900-101240009 900 886 980 203 635 690 30 90 60 130 254 300 17 8 F25 475.075-010-101240009 1000 986 1085 216 685 740 30 90 60 130 254 300 17 8 F25 635.0

0 = PN 10 1 = PN 16. Bigger sizes on request.

Wafer typeFace to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202-K1)Flange connection to ISO 7005-2 (EN 1092-2: 1997, DIN 2501)

1

2

3

4

5

6

7

8

9

10

11

12

17

18

14

13

15

16

1

2

3

DN > 350

DN > 350

L

H2

H1

L5

F2

ISOflange

1. Shaft2. Bushing3. O-ring4. Body

5. Bearing 6. Conical pin 7. Disc8. Shaft

9. Lining 10. Bearing 11. Sealing ring12. Plug

13. Screw 14. Ring15. O-ring 16. Axial bearing

17. Cover plate18. Screw

AVKI DN PN class L L5 H1 H2 F2 ISO flange Theoretical AVK ref. nos. nos. mm mm mm mm mm mm mm weight kg

75-0040-102230026142 75-00842 40 16 43 12 118 63 34 90 2.6 75-0050-102230026142 75-00843 50 16 43 12 118 63 34 90 2.675-0065-102230026142 75-00844 65 16 46 12 126 71 34 90 3.275-0080-102230026142 75-00845 80 16 46 12 133 78 34 90 3.575-0100-102230026142 75-00846 100 16 52 12 147 98 34 90 4.575-0125-102230026142 75-00847 125 16 56 12 160 109 34 90 6.375-0150-102230026142 75-00848 150 16 56 14 180 133 34 90 8.875-0200-102230013142 75-00849 200 10 60 14 204 158 34 90 1375-0250-102251013142 75-00850 250 10 68 15 245 194 45 125 2275-0300-102251013142 75-00851 300 10 78 15 270 219 45 125 3275-0350-102251013142 75-00852 350 10 78 15 315 256 45 125 4075-0400-102251013142 75-00853 400 10 102 25 363 308 50 175 7575-0450-102251013142 75-00854 450 10 114 25 388 334 50 175 9075-0500-102251013142 75-00855 500 10 127 25 413 360 50 175 12075-0600-102251013142 75-00856 600 10 154 25 510 426 50 175 18075-0700-102251013142 75-00857 700 10 165 25 560 480 60 210 29575-0800-102251013142 75-00858 800 10 190 25 610 525 60 210 34575-0900-102251013142 75-00859 900 10 203 30 690 635 90 300 47575-1000-102251013142 75-00860 1000 10 216 30 740 685 90 350 63575-1200-102251013142 75-00861 1200 10 254 35 855 870 85 415 150075-1400-102251013142 75-00862 1400 10 250 35 955 980 85 415 1900

Ce

ntr

ic,

fixe

d l

ine

r

Page 21: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 21

Butterfly valve to EN 593, for water to max. 70° C.Face to face according to EN 558 table 5 basic series 20. Standard flange drilling to EN1092-2 (ISO 7005-2).Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved according to DIN-DVGW Certificate NW-6201AP2412 and KIWA Certificate K 6070/05.

Centric semi lug butterfly valve with fixed EPDM rubber liner.Body of ductile iron JL1030/GJS-400-15 (GGG-40) coated with 200 my epoxy coating blue RAL 5017. Disc, shaft and conical pin of duplex steel. Top and bottom bearings of steel with PTFE coating. Top shaft sealing consisting of a bronze bushing with 2 EPDM O-rings, and bottom shaft sealing with a plug of galvanized steelwith a copper sealing ring.

AVK SEmI LuG BuTTERfLy VALVE, PN 10/16 75/31Centric with fixed liner

1. Shaft2. Bushing3. O-ring4. Body

5. Bearing 6. Conical pin 7. Disc8. Shaft

9. Lining 10. Bearing 11. Sealing ring12. Plug

AVK BUTTERFLY VALVE PN 10 OR PN 16 75/10

Component list

1. Shaft 7. Disc 13. Screw2. Bushing 8. Shaft 14. Ring3. O-ring 9. Lining 15. O-ring4. Body 10. Bearing 16. Axial bearing5. Bearing 11. Sealing ring 17. Cover plate6. Conical pin 12. Plug 18. Screw

Top flangeA B C D E F G H J K L ds Weight

Ref. nos. DN mm mm mm mm mm mm mm mm mm mm mm mm Holes SO 5211 kilos

75-040-101041009 40 40 85 33 58 113 12 34 10 18 70 90 9 4 F07 2.575-050-101041009 50 50 100 43 63 118 12 34 10 18 70 90 9 4 F07 2.675-065-101041009 65 65 115 46 71 126 12 34 10 18 70 90 9 4 F07 3.275-080-101041009 80 80 130 46 78 133 12 34 10 18 70 90 9 4 F07 3.575-100-101041009 100 100 150 52 96 147 12 34 12 22 70 90 9 4 F07 4.575-125-101041009 125 125 182 56 109 160 12 34 12 22 70 90 9 4 F07 6.375-150-101041009 150 150 210 56 133 180 14 34 16 30 70 90 9 4 F07 8.875-200-101040009 200 200 262 60 158 204 14 34 16 30 70 90 9 4 F07 13.275-250-101040009 250 250 315 68 194 245 15 45 24 38 102 125 11 4 F10 22.075-300-101040009 300 300 371 78 219 270 15 45 24 38 102 125 11 4 F10 32.075-350-101240009 350 336 405 78 256 315 15 45 24 38 102 125 11 4 F10 40.075-400-101240009 400 386 470 102 308 363 25 50 30 90 140 175 17 4 F14 75.075-450-101240009 450 436 522 114 334 388 25 50 30 90 140 175 17 4 F14 90.075-500-101240009 500 486 576 127 360 413 25 50 30 90 140 175 17 4 F14 120.075-600-101240009 600 586 672 154 426 510 25 50 40 100 140 175 17 4 F14 180.075-700-101240009 700 686 776 165 480 560 25 60 46 110 165 210 21 4 F16 295.075-750-101240009 750 736 826 190 520 585 25 60 46 110 165 210 21 4 F16 325.075-800-101240009 800 786 880 190 525 610 25 60 46 110 165 210 21 4 F16 345.075-900-101240009 900 886 980 203 635 690 30 90 60 130 254 300 17 8 F25 475.075-010-101240009 1000 986 1085 216 685 740 30 90 60 130 254 300 17 8 F25 635.0

0 = PN 10 1 = PN 16. Bigger sizes on request.

Wafer typeFace to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202-K1)Flange connection to ISO 7005-2 (EN 1092-2: 1997, DIN 2501)

1

2

3

4

5

6

7

8

9

10

11

12

17

18

14

13

15

16

1

2

3

DN > 350

DN > 350

L

H2

H1

L5

F2

ISOflange

AVKI DN PN class L L5 H1 H2 F2 ISO flange Theoretical AVK ref. nos. nos. mm mm mm mm mm mm mm weight kg

75-0050-312230026142 75-00863 50 16 43 12 152 63 34 90 3.175-0065-312230026142 75-00864 65 16 46 12 160 71 34 90 3.975-0080-312230026142 75-00865 80 16 46 12 167 78 34 90 4.275-0100-312230026142 75-00866 100 16 52 12 189 98 34 90 5.575-0125-312230026142 75-00867 125 16 56 12 202 109 34 90 7.575-0150-312230026142 75-00868 150 16 56 14 224 133 34 90 1075-0200-312230013142 75-00869 200 10 60 14 248 158 34 90 14

Page 22: AVK Butterfly Valve Brochure

22 | Butterfly valves for drinking water

Butterfly valve to EN 593, for water to max. 70° C. Face to face according to EN 558 table 5 basic series 20. Standard flange drilling to EN1092-2 (ISO 7005-2)Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved according to DIN-DVGW Certificate NW-6201AP2412 and KIWA Certificate K 6070/05.

Centric full lug butterfly valve with fixed EPDM rubber liner.Body of ductile iron JL1030/GJS-400-15 (GGG-40) coated with 200 my epoxy coating blue RAL 5017. DN ≤200: Disc, shaft and conical pin of duplex steel. DN ≥250: Disc of rilsan coated ductile iron, shaft and conical pin of stainless steel. Top and bottom bearings of steel with PTFE coating. Top shaft sealing DN ≤350: Bronze bushing with two EPDM O-rings, DN ≥400: EPDM O-ring in bushing fixed with countersunk screws of galvanized steel. Bottom shaft sealing: DN ≤350: Plug of galvanized steel with a copper sealing ring, DN ≥400: Axial bearing, ring of alubronze and an EPDM O-ring, protected by a cover plate of galvanized steel.

AVK fuLL LuG BuTTERfLy VALVE, PN 10/16 75/41Centric with fixed liner

AVK BUTTERFLY VALVE PN 10 OR PN 16 75/10

Component list

1. Shaft 7. Disc 13. Screw2. Bushing 8. Shaft 14. Ring3. O-ring 9. Lining 15. O-ring4. Body 10. Bearing 16. Axial bearing5. Bearing 11. Sealing ring 17. Cover plate6. Conical pin 12. Plug 18. Screw

Top flangeA B C D E F G H J K L ds Weight

Ref. nos. DN mm mm mm mm mm mm mm mm mm mm mm mm Holes SO 5211 kilos

75-040-101041009 40 40 85 33 58 113 12 34 10 18 70 90 9 4 F07 2.575-050-101041009 50 50 100 43 63 118 12 34 10 18 70 90 9 4 F07 2.675-065-101041009 65 65 115 46 71 126 12 34 10 18 70 90 9 4 F07 3.275-080-101041009 80 80 130 46 78 133 12 34 10 18 70 90 9 4 F07 3.575-100-101041009 100 100 150 52 96 147 12 34 12 22 70 90 9 4 F07 4.575-125-101041009 125 125 182 56 109 160 12 34 12 22 70 90 9 4 F07 6.375-150-101041009 150 150 210 56 133 180 14 34 16 30 70 90 9 4 F07 8.875-200-101040009 200 200 262 60 158 204 14 34 16 30 70 90 9 4 F07 13.275-250-101040009 250 250 315 68 194 245 15 45 24 38 102 125 11 4 F10 22.075-300-101040009 300 300 371 78 219 270 15 45 24 38 102 125 11 4 F10 32.075-350-101240009 350 336 405 78 256 315 15 45 24 38 102 125 11 4 F10 40.075-400-101240009 400 386 470 102 308 363 25 50 30 90 140 175 17 4 F14 75.075-450-101240009 450 436 522 114 334 388 25 50 30 90 140 175 17 4 F14 90.075-500-101240009 500 486 576 127 360 413 25 50 30 90 140 175 17 4 F14 120.075-600-101240009 600 586 672 154 426 510 25 50 40 100 140 175 17 4 F14 180.075-700-101240009 700 686 776 165 480 560 25 60 46 110 165 210 21 4 F16 295.075-750-101240009 750 736 826 190 520 585 25 60 46 110 165 210 21 4 F16 325.075-800-101240009 800 786 880 190 525 610 25 60 46 110 165 210 21 4 F16 345.075-900-101240009 900 886 980 203 635 690 30 90 60 130 254 300 17 8 F25 475.075-010-101240009 1000 986 1085 216 685 740 30 90 60 130 254 300 17 8 F25 635.0

0 = PN 10 1 = PN 16. Bigger sizes on request.

Wafer typeFace to face dimension to ISO 5752 short, basic series 20 (BS 5155 wafer short, DIN 3202-K1)Flange connection to ISO 7005-2 (EN 1092-2: 1997, DIN 2501)

1

2

3

4

5

6

7

8

9

10

11

12

17

18

14

13

15

16

1

2

3

DN > 350

DN > 350

L

H2

H1

L5

F2

ISOflange

1. Shaft2. Bushing3. O-ring4. Body

5. Bearing 6. Conical pin 7. Disc8. Shaft

9. Lining 10. Bearing 11. Sealing ring12. Plug

13. Screw 14. Ring15. O-ring 16. Axial bearing

17. Cover plate18. Screw

AVKI DN Product PN PN L L5 H1 H2 F2 ISO flange Theoretical AVK ref. nos. nos. mm drilling mm mm mm mm mm mm weight kg

75-0050-412230026142 75-00870 50 16 16 43 12 118 63 34 90 875-0065-412230026142 75-00871 65 16 16 46 12 126 71 34 90 975-0080-412230026142 75-00872 80 16 16 46 12 133 78 34 90 1075-0100-412230026142 75-00935 100 16 16 52 12 147 98 34 90 1275-0125-412230026142 75-00874 125 16 16 56 12 160 109 34 90 1675-0150-412230026142 75-00875 150 16 16 56 14 180 133 34 90 2075-0200-412230013142 75-00876 200 10 10 60 14 204 158 34 90 2575-0250-412251013142 75-00877 250 10 10 68 15 245 194 45 125 2875-0300-412251013142 75-00878 300 10 10 78 15 270 219 45 125 3675-0350-412251013142 75-00879 350 10 10 78 15 315 256 45 125 5075-0400-412251013142 75-00880 400 10 10 102 25 363 308 50 175 8575-0450-412251013142 75-00881 450 10 10 114 25 388 334 50 175 10575-0500-412251013142 75-00882 500 10 10 127 25 413 360 50 175 13075-0600-412251013142 75-00883 600 10 10 154 25 510 426 50 175 20575-0700-412251013142 75-00884 700 10 10 165 25 560 480 60 210 32575-0800-412251013142 75-00885 800 10 10 190 25 610 525 60 210 62575-0900-412251013142 75-00886 900 10 10 203 30 690 635 90 300 62575-1000-412251013142 75-00887 1000 10 10 216 30 740 685 90 350 95075-1200-412251013142 75-00888 1200 10 10 254 35 855 870 85 415 1400

Ce

ntr

ic,

fixe

d l

ine

r

Page 23: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 23

Butterfly valve to EN 593, for water to max. 70° C.Face to face according to EN 558 table 4 basic series 13. Standard flange drilling to EN1092-2 (ISO 7005-2)Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved according to DIN-DVGW Certificate NW-6201AP2412 and KIWA Certificate K 6070/05.

Centric double flanged short butterfly valve with fixed EPDM rubber liner.Body of ductile iron JL1030/GJS-400-15 (GGG-40) coated with 200 my epoxy coating blue RAL 5017. DN ≤200: Disc, shaft and conical pin of duplex steel. DN ≥250: Disc of rilsan coated ductile iron, shaft and conical pin of stainless steel. Top and bottom bearings of steel with PTFE coating. Top shaft sealing DN ≤350: Bronze bushing with two EPDM O-rings, DN ≥400: EPDM O-ring in bushing fixed with countersunk screws of galvanized steel. Bottom shaft sealing: DN ≤350: Plug of galvanized steel with a copper sealing ring, DN ≥400: Axial bearing, ring of alubronze and an EPDM O-ring, protected by a cover plate of galvanized steel.

AVK DOuBLE fLANGED BuTTERfLy VALVE, ShORT, PN 10/16 75/20Centric with fixed liner

1. Shaft2. Bushing3. O-ring4. Body

5. Bearing 6. Conical pin 7. Disc8. Shaft

9. Lining 10. Bearing 11. Sealing ring12. Plug

13. Screw 14. Ring15. O-ring 16. Axial bearing

17. Cover plate18. Screw

L

H2

H1

L5

F2

ISOFlange

1

2

3

4

5

6

7

8

9

10

11

12

17

18

14

13

15

16

1

2

3

DN > 350

DN > 350

AVKI DN PN class PN L L5 H1 H2 F2 ISO flange Theoretical AVK ref. nos. nos. mm drilling mm mm mm mm mm mm weight kg

75-0050-202230026142 75-00889 50 16 16 108 12 118 63 34 90 875-0065-202230026142 75-00890 65 16 16 112 12 126 71 34 90 975-0080-202230026142 75-00891 80 16 16 114 12 133 78 34 90 1175-0100-202230026142 75-00892 100 16 16 127 12 147 98 34 90 1375-0125-202230026142 75-00893 125 16 16 140 12 160 109 34 90 1775-0150-202230026142 75-00894 150 16 16 140 14 180 133 34 90 2375-0200-202230013142 75-00937 200 10 10 152 14 204 158 34 90 3275-0250-202251013142 75-00896 250 10 10 165 15 245 194 45 125 5075-0300-202251013142 75-00897 300 10 10 178 15 270 219 45 125 6575-0350-202251013142 75-00898 350 10 10 190 15 315 256 45 125 9575-0400-202251013142 75-00899 400 10 10 216 25 363 308 50 175 13075-0450-202251013142 75-00900 450 10 10 222 25 388 334 50 175 15075-0500-202251013142 75-00901 500 10 10 229 25 413 360 50 175 20075-0600-202251013142 75-00902 600 10 10 267 25 510 426 50 175 30075-0700-202251013142 75-00903 700 10 10 292 25 560 480 60 210 38075-0800-202251013142 75-00904 800 10 10 318 25 610 525 60 210 50075-0900-202251013142 75-00905 900 10 10 330 30 690 635 90 300 66075-1000-202251013142 75-00906 1000 10 10 410 30 740 685 90 350 90075-1200-202251013142 75-00907 1200 10 10 470 35 855 870 85 415 130075-1400-202251013142 75-00908 1400 10 10 530 35 955 970 85 415 170075-1500-202251013142 75-00909 1500 10 10 600 50 1029 1037 100 475 210075-1600-202251013142 75-00910 1600 10 10 600 50 1079 1096 100 475 250075-1800-202251013142 75-00911 1800 10 10 670 50 1176 1187 120 475 350075-2000-202251013142 75-00912 2000 10 10 760 50 1276 1287 140 475 4000

Page 24: AVK Butterfly Valve Brochure

24 | Butterfly valves for drinking water

Butterfly valve to EN 593, for water to max. 70° C.Face to face according to EN 558 table 2 basic series 14. Standard flange drilling to EN1092-2 (ISO 7005-2)Hydraulic test according to EN 1074-1 and 2 / EN 12266.Approved according to DIN-DVGW Certificate NW-6201AP2412 and KIWA Certificate K 6070/05.

Centric double flanged long butterfly valve with fixed EPDM rubber liner.Body of ductile iron JL1030/GJS-400-15 (GGG-40) coated with 200 my epoxy coating blue RAL 5017. DN ≤200: Disc, shaft and conical pin of duplex steel. DN ≥250: Disc of rilsan coated ductile iron, shaft and conical pin of stainless steel. Top and bottom bearings of steel with PTFE coating. Top shaft sealing DN ≤350: Bronze bushing with two EPDM O-rings, DN ≥400: EPDM O-ring in bushing fixed with countersunk screws of galvanized steel. Bottom shaft sealing: DN ≤350: Plug of galvanized steel with a copper sealing ring, DN ≥400: Axial bearing, ring of alubronze and an EPDM O-ring, protected by a cover plate of galvanized steel.

AVK DOuBLE fLANGED BuTTERfLy VALVE, LONG, PN 10/16 75/21Centric with fixed liner

1. Shaft2. Bushing3. O-ring4. Body

5. Bearing 6. Conical pin 7. Disc8. Shaft

9. Lining 10. Bearing 11. Sealing ring12. Plug

13. Screw 14. Ring15. O-ring 16. Axial bearing

17. Cover plate18. Screw

L

H2

H1

L5

F2

ISOFlange

1

2

3

4

5

6

7

8

9

10

11

12

17

18

14

13

15

16

1

2

3

DN > 350

DN > 350

AVKI DN PN class PN L L H H2 F2 ISO Theoretical AVK ref. nos. nos. mm drilling mm mm mm mm mm flange mm weight kg

75-0050-212230026142 75-00913 50 16 16 150 12 118 63 34 90 1175-0065-212230026142 75-00914 65 16 16 170 12 126 71 34 90 1375-0080-212230026142 75-00915 80 16 16 180 12 133 78 34 90 1775-0100-212230026142 75-00934 100 16 16 190 12 147 98 34 90 2075-0125-212230026142 75-00917 125 16 16 200 12 160 109 34 90 2675-0150-212230026142 75-00936 150 16 16 210 14 180 133 34 90 3175-0200-212230013142 75-00938 200 10 10 230 14 204 158 34 90 4575-0250-212251013142 75-00920 250 10 10 250 15 245 194 45 125 7075-0300-212251013142 75-00921 300 10 10 270 15 270 219 45 125 9075-0350-212251013142 75-00922 350 10 10 290 15 315 256 45 125 12075-0400-212251013142 75-00923 400 10 10 310 25 363 308 50 175 16575-0450-212251013142 75-00924 450 10 10 330 25 388 334 50 175 20075-0500-212251013142 75-00925 500 10 10 350 25 413 360 50 175 23075-0600-212251013142 75-00926 600 10 10 390 25 510 426 50 175 32075-0700-212251013142 75-00927 700 10 10 430 25 560 480 60 210 42075-0800-212251013142 75-00928 800 10 10 470 30 690 635 90 210 61075-0900-202251013142 75-00929 900 10 10 510 30 690 635 90 300 82075-1000-212251013142 75-00930 1000 10 10 550 30 740 685 90 350 113075-1200-212251013142 75-00931 1200 10 10 630 35 855 870 85 415 160075-1400-212251013142 75-00932 1400 10 10 710 35 955 970 85 415 210075-1500-212251013142 75-00933 1500 10 10 750 50 1029 1037 100 475 2500

Ce

ntr

ic,

fixe

d l

ine

r

Page 25: AVK Butterfly Valve Brochure

ACTuATION Of BuTTERfLy VALVES 75

LeverFor quick manual valve operation.Lift and turn operation with spring activated locking.Lever parallel to disc. Notch plate with 10 positions.For valves up to DN 300.

GearboxFor easy manual valve operation.Self-locking wormgear with handwheel or T-key operation.Adjustable end stops and position indicator.For valves up to DN 2200.

Pneumatic actuatorDouble acting, spring to close or spring to open.Different types available:•Rack and pinion construction, compact and short stroke.•Heavy duty execution with long stroke rack and pinion construction.Including position indicator.For valves up to DN 2200.

Electric actuatorElectric AC or DC motor with self-locking gear unit.Limit switches for open and close stroke adjustment.Including position indicator.Emergency operation with handwheel.

Butterfly valves for drinking water| 25

Page 26: AVK Butterfly Valve Brochure

26 | Butterfly valves for drinking water

A wide range of standard

and special opt ions

Centr ic but ter f ly valves

with loose l iner

Basic range - series 76•Fully coated (80 my) body with extended

neck for insulation•Anti blow-out shaft of stainless steel•Hexagon disc/shaft connection•Disc of nickel plated carbon steel•Loose EPDM liner with profiled gasket

faces and reinforced seating area •Low friction PTFE coated bearings•POM bearings and EPDM O-ring

Wide range of loose liner butterfly valves

The loose liner design also has advantages over the fixed liner design. The cash benefit is the low

purchase price, especially in the smaller dimensions. Additionally, the loose liner makes it possible

to apply coating internally and externally and secure a strong corrosion protection around the liner.

AVK offers two ranges; Series 76 is our basic range available as wafer and lug in DN 50-200 with

lever and DN 250-300 with wormgear. Series 820 is our new full range from InterApp available as

wafer, lug and U-section in DN 25-1600 with any type of actuation.

Ce

ntr

ic,

loo

se l

ine

r

Page 27: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 27

A wide range of standard

and special opt ions

A wealth of disc and liner options

Our standard configuration for drinking water

applications has a disc of acid-proof stainless steel

and of course an EPDM liner approved for

drinking water. However, from the series

820 range we offer a wealth of optional

disc and liner materials for your choice.

Full range - series 820•Fully coated (100 my) body with

extended neck for insulation•Blow-out proof shaft of stainless steel•Disc of acid-proof stainless steel or

optional materials•Loose EPDM liner with profiled gasket

faces•NBR O-ring •Retaining washer and bolts of stainless

steel•Valves above DN 450 have alubronze

shaft bearings

Performance proved around the world

Worldwide leading utility companies benefit from

InterApp’s expertise in engineering and project

management within the water treatment industries. A

modular just-in-time manufacturing system makes it

possible to adapt products individually to customer

specifications.

A well defined range of actuators

For series 820 we can offer any type of quality

actuation. Our standard options are levers, gearboxes,

single and double acting pneumatic actuators and

electric actuators. InterApp has in-depth knowledge

of selecting and mounting actuators for all

types of applications and will help you

make a cost efficient choice.

Page 28: AVK Butterfly Valve Brochure

28 | Butterfly valves for drinking water

Centric butterfly valve with loose liner to EN 593, for drinking water to max. 70° C.Face to face according to EN 558 table 5 basic series 20. End connection to EN 1092-2 PN 6/10/16, ASME B16.5 Cl. 150.Hydraulic test according to EN 12266-1, P10/P12.Approved for drinking water.

Wafer butterfly valve with centring lugs, centric type with loose EPDM rubber liner approved for drinking water. Long neck one-piece body of ductile iron JS 1050/GJS-500-7 (GGG-50) coated with epoxy. Two stub anti-blowout shaft of stainless steel AISI 420 secured with a POM plate at the top and a steel bolt at the bottom. Two POM bearings and an EPDM O-ring at the top. Disc of nickel plated carbon steel fixed into PTFE coated steel bearings on each side.DN 50 - 200 PN 10/16, with leverDN 250 - 300 PN 10, with wormgear

AVK WAfER BuTTERfLy VALVE, PN 10/16 76/70Centric with loose liner 20

H2

H

F2

Dh

Dh

D1

H2

H

F2

D1

Ds

Ds

1

9

5

7

8

6

L

WF1

DN2L1

2

3

4

1

9

5

7

8

6

L

WF1

DN2L1

2

3

4

1. Shaft2. Anti-blowout plate3. Plastic bearings

4. O-ring5. Body6. Liner

7. Disc8. Shaft9. Steel bearings

AVKI DN DN 2 PN L H H2 dh d1 ds W F1 F2 Theoretical AVK ref. nos. nos. mm mm class mm mm mm mm mm mm mm mm mm weight kg

76-0050-70-817002690205 76-00037 50 48 10/16 43 125 63 50 12 7 67 9 16 2.576-0065-70-817002690205 76-00039 65 62 10/16 46 150 76 50 12 7 67 9 16 376-0080-70-817002690205 76-00041 80 76 10/16 46 157 83 50 12 7 67 9 16 476-0100-70-817002690205 76-00043 100 95 10/16 52 182 96 70 14 9 92 11 19 576-0125-70-817002690205 76-00045 125 120 10/16 56 201 113 70 18 9 92 14 25 676-0150-70-817002690205 76-00047 150 145 10/16 56 214 126 70 18 9 92 14 25 976-0200-70-817002690205 76-00049 200 195 10/16 60 245 155 102 22 11 92 17 30 1376-0250-70-817001390203 * 76-00051 250 245 10 68 283 195 102 28 11 130 22 39 2576-0300-70-817001390203 * 76-00053 300 295 10 78 308 220 102 28 11 130 22 39 34

* With wormgear

Ce

ntr

ic,

loo

se l

ine

r

Page 29: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 29

Centric butterfly valve with loose liner to EN 593, for drinking water to max. 70° C.Face to face according to EN 558 table 5 basic series 20. Standard flange drilling to EN1092-2 (ISO 7005-2).Hydraulic test according to EN 12266-1, P10/P12.Approved for drinking water.

Lug butterfly valve, centric type with loose EPDM rubber liner approved for drinking water. Long neck one-piece body of ductile iron JS 1050/GJS-500-7 (GGG-50) coated with epoxy. Two stub anti-blowout shaft of stainless steel AISI 420 secured with a POM plate at the top and a steel bolt at the bottom. Two POM bearings and an EPDM O-ring at the top. Disc of nickel plated carbon steel fixed into PTFE coated steel bearings on each side.DN 50 - 200 PN 10/16, with leverDN 250 - 300 PN 10, with wormgear

AVK LuG BuTTERfLy VALVE, PN 10/16 76/71Centric with loose liner 30

1. Shaft2. Anti-blowout plate3. Plastic bearings

4. O-ring5. Body6. Liner

7. Disc8. Shaft9. Steel bearings

H2

H

F2

Dh

Dh

D1

H2

H

F2

D1

Ds

Ds

1

9

5

7

8

6

L

WF1

DN2L1

2

3

4

1

9

5

7

8

6

L

WF1

DN2L1

2

3

4

AVKI DN DN 2 PN L H H2 dh d1 ds W F1 F2 Theoretical AVK ref. nos. nos. mm mm class mm mm mm mm mm mm mm mm mm weight kg

76-0050-71-837002690205 76-00091 50 48 10/16 43 125 63 50 12 7 67 9 16 3.676-0065-71-837002690205 76-00093 65 62 10/16 46 157 76 50 12 7 67 9 16 4.476-0080-71-837002690205 76-00095 80 76 10/16 46 157 83 50 12 7 67 9 16 5.976-0100-71-837002690205 76-00097 100 95 10/16 52 182 96 70 14 9 92 11 19 8.676-0125-71-837002690205 76-00099 125 120 10/16 56 201 113 70 18 9 92 14 25 1176-0150-71-837002690205 76-00101 150 145 10/16 56 214 126 70 18 9 92 14 25 1276-0200-71-837002690205 76-00103 200 195 10/16 60 245 155 70 22 9 92 17 30 1676-0250-71-837001390203 * 76-00105 250 245 10 68 283 195 102 28 11 130 22 39 2876-0300-71-837001390203 * 76-00107 300 295 10 78 308 220 102 28 11 130 22 39 38

* With wormgear

Page 30: AVK Butterfly Valve Brochure

30 | Butterfly valves for drinking water

Centric wafer butterfly valve with loose liner, for drinking water to max. 70° C. Designed according to EN 593.Face to face according to DIN/EN 558-1, series 20 (K1). End connection to EN 1092-2 PN 6/10/16, ASME B16.5 Cl. 150.Hydraulic test according to EN 12266-1, P10/P12. Approved according to DIN-DVGW Certificate NW-6201BS0394, ACS Certificate 10 ACC LI 038 and SVGW Certificate No. 9901-4048.

Wafer butterfly valve with centring lugs, centric type with loose EPDM rubber liner with DVGW, SVGW and ACS approval.Long neck one-piece body of ductile iron GJS-450-15 (GGG-40) coated with 100 μm epoxy up to DN 400 and 100 μm polyurethane from DN 450 to DN 900.Shaft of stainless steel AISI 420 and disc of acid-resistant stainless steel 1.4408. From DN 450 mounted with two self-lubricating shaft bearings of bronze. O-ring of NBR rubber and bolts of stainless steel A2.Working pressure: 16 or 10 bar.According to PED 97/23/EC appendix 1.

AVK WAfER BuTTERfLy VALVE, PN 10/16 820/00Centric with loose liner, bare shaft 025

Top flange to ISO 5211

DN mm DN mmF2: 25-150: 19 F: 25-40: 8 200: 25 50-100: 11 250-300: 32 125-150: 14 350-400: 40 200: 17 450-500: 65 250-350: 22 600-800: 80 400: 27 900: 100 450-500: Ø45 600-800: Ø70L5: 25-200: 12 900: Ø80 250-400: 18 450-700: 25 800-900: 30 DN Flange ISO: 25-200: F07DS: 25-200: 9 250: F10 250 10 300-400: F12 300-400: 13 450-500: F14 450-500: 18 600: F16 600: 22 700-800: F25 700-800: 18 900: F30 900: 22

R

SHAFTNº

DISCLINER

BODY

FIG.

1 0 2 7 PNPS (bar) at 20º

TS IN °C

DN

InterApp

H2

W2

L2

DN 25-65 DN 80-100 DN 125-150 DN 200-900

W3

L2 L2 L2

1

3

5

6

4

L

W4

2

7

L1

ds

W1W

WF

L5

F2

1. Bolt2. Retaining washer3. O-ring

4. Shaft5. Body6. Liner

7. Disc

Top flange to ISO 5211

DN mm DN mmF2: 25-150: 19 F: 25-40: 8 200: 25 50-100: 11 250-300: 32 125-150: 14 350-400: 40 200: 17 450-500: 65 250-350: 22 600-800: 80 400: 27 900: 100 450-500: Ø45 600-800: Ø70L5: 25-200: 12 900: Ø80 250-400: 18 450-700: 25 800-900: 30 DN Flange ISO: 25-200: F07DS: 25-200: 9 250: F10 250 10 300-400: F12 300-400: 13 450-500: F14 450-500: 18 600: F16 600: 22 700-800: F25 700-800: 18 900: F30 900: 22

R

SHAFTNº

DISCLINER

BODY

FIG.

1 0 2 7 PNPS (bar) at 20º

TS IN °C

DN

InterApp

H2

W2

L2

DN 25-65 DN 80-100 DN 125-150 DN 200-900

W3

L2 L2 L2

1

3

5

6

4

L

W4

2

7

L1

ds

W1W

WF

L5

F2

AVKI DN PN L L2 H2 W2 W3 L1 W4 W W1 Theoretical AVK ref. nos. nos. mm class mm mm mm mm mm mm mm mm mm weight kg

820-0025-00-04020160002 820-000839 25 16 30 101 51 110 129 3 19 90 70 1.4820-0032-00-04020160002 820-000840 32 16 30 101 51 110 129 3 19 90 70 1.4820-0040-00-04020160002 820-000841 40 16 33 108 54 130 149 6 28 90 70 2.0820-0050-00-04020160002 820-000842 50 16 43 120 72 135 154 6 32 90 70 3.0820-0065-00-04020160002 820-000843 65 16 46 138 82 150 169 11 50 90 70 3.6820-0080-00-04020160002 820-000844 80 16 46 142 92 160 179 19 69 90 70 4.0820-0100-00-04020160002 820-000845 100 16 52 162 102 180 199 26 88 90 70 5.5820-0125-00-04020160002 820-000846 125 16 56 189 120 195 214 36 115 90 70 7.5820-0150-00-04020160002 820-000847 150 16 56 214 133 210 229 48 141 90 70 8.6820-0200-00-04020130002 820-000848 200 10 60 270 163 240 265 72 194 90 70 13820-0250-00-04020130002 820-000849 250 10 68 324 196 279 311 91 240 155 125 22820-0300-00-04020130002 820-000850 300 10 78 378 232 315 347 112 290 155 125 31820-0350-00-04020130002 820-000851 350 10 80 425 257 330 370 130 330 155 125 42820-0400-00-04020130002 820-000852 400 10 102 475 292 365 375 145 377 155 125 57820-0450-00-04060031002 * 820-000853 450 10 113 538 355 397 462 164 425 175 140 95820-0500-00-04060031002 * 820-000854 500 10 126 595 393 437 502 182 474 175 140 125820-0600-00-04060031002 * 820-000855 600 10 153 695 464 522 602 218 569 220 165 180820-0700-00-04060031002 * 820-000856 700 10 168 800 503 565 645 257 660 300 254 280820-0800-00-04060031002 * 820-000858 800 10 190 908 577 627 707 304 774 300 254 387820-0900-00-04060031002 * 820-001236 900 10 204 1015 643 696 776 337 855 350 298 502

* with 100 my PUR coating

Ce

ntr

ic,

loo

se l

ine

r

Page 31: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 31

AVK WAfER BuTTERfLy VALVE 820/00Centric with loose liner

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With lever nos. mm class mm mm mm weight kg

820-0025-00-040201600 820-000037 25 16 151 231 46 1.8820-0032-00-040201600 820-000038 32 16 151 231 46 1.8820-0040-00-040201600 820-000039 40 16 171 234 46 2.4820-0050-00-040201600 820-000040 50 16 176 240 46 3.4820-0065-00-040201600 820-000041 65 16 191 249 46 4.0820-0080-00-040201600 820-000042 80 16 203 314 46 4.5820-0100-00-040201600 820-000043 100 16 223 324 46 6.0820-0125-00-040201600 820-000044 125 16 246 435 46 8.1820-0150-00-040201600 820-000045 150 16 261 447 46 9.2820-0200-00-040200300 820-000046 200 10 291 475 46 14820-0250-00-04020030001 820-000047 250 10 319 662 78 24820-0300-00-04020030001 820-000048 300 10 355 689 78 32

W

W3

W1

AVK ref. nos. AVK1 DN PN W3 W W1 Theoretical With gearbox nos. mm class mm mm mm weight kg

820-0025-00-04020160003 820-000149 25 16 187 172 141 2.2820-0032-00-04020160003 820-000150 32 16 187 172 141 2.2820-0040-00-04020160003 820-000151 40 16 207 175 141 2.8820-0050-00-04020160003 820-000152 50 16 212 181 141 3.8820-0065-00-04020160003 820-000153 65 16 227 190 141 4.4820-0080-00-04020160003 820-000154 80 16 237 192 141 4.8820-0100-00-04020160003 820-000155 100 16 257 202 141 6.3820-0125-00-04020160003 820-000156 125 16 272 216 141 8.3820-0150-00-04020160003 820-000157 150 16 317 287 171 9.5820-0200-00-04020130003 820-000158 200 10 347 315 171 14820-0250-00-04020130003 820-000159 250 10 432 371 231 24820-0300-00-04020130003 820-000160 300 10 468 398 231 32820-0350-00-04020130003 820-000161 350 10 570 589 363 47820-0400-00-04020130003 820-000162 400 10 705 634 463 63820-0450-00-04060031004 * 820-000163 450 10 795 615 565 117820-0500-00-04060031004 * 820-000164 500 10 792 685 573 157820-0600-00-04060031004 * 820-000165 600 10 827 795 604 212820-0700-00-04060031004 * 820-000166 700 10 920 847 654 325820-0800-00-04060031004 * 820-000168 800 10 936 954 683 457820-0900-00-04060031004 * 820-001239 900 10 1005 1008 683 572

* with 100 my PUR coating

W

W3

W1

W1

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With double acting nos. mm class mm mm mm weight kg pneumatic actuator

820-0025-00-04020160005 820-000309 25 16 215 92 154 3.1820-0032-00-04020160005 820-000310 32 16 215 92 154 3.1820-0040-00-04020160005 820-000311 40 16 235 92 154 3.7820-0050-00-04020130005 820-000312 50 10 240 92 154 4.7820-0065-00-04020130005 820-000313 65 10 255 92 154 5.3820-0080-00-04020120005 820-000314 80 6 282 105 204 6.9820-0100-00-04020120005 820-000315 100 6 302 105 204 8.4820-0125-00-04020120005 820-000316 125 6 317 105 204 10820-0150-00-04020120005 820-000317 150 6 345 119 241 13820-0200-00-04020120005 820-000318 200 6 387 131 259 18820-0250-00-04020120005 820-000319 250 6 466 159 333 33820-0300-00-04020120005 820-000320 300 6 522 183 395 46820-0350-00-04020120005 820-000321 350 6 556 201 423 61820-0400-00-04020120005 820-000322 400 6 660 245 528 94820-0450-00-04060021005 * 820-000323 450 6 746 284 605 151820-0500-00-04060021005 * 820-000324 500 6 817 319 710 203820-0600-00-04060021005 * 820-000325 600 6 955 371 812 298820-0700-00-04060021005 * 820-000326 700 6 1025 418 855 407820-0800-00-04060021005 * 820-000328 800 6 1087 418 855 637820-0900-00-04060021005 * 820-001243 900 6 1294 528 950 672

* with 100 my PUR coating

W3

W

W1

Page 32: AVK Butterfly Valve Brochure

32 | Butterfly valves for drinking water

AVK WAfER BuTTERfLy VALVE 820/00Centric with loose liner

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With electric actuator nos. mm class mm mm mm weight kg

820-0025-00-04020160008 820-000629 25 16 335 319 200 17820-0032-00-04020160008 820-000630 32 16 335 319 200 17820-0040-00-04020160008 820-000631 40 16 355 319 200 17820-0050-00-04020130008 820-000632 50 10 360 263 200 17820-0065-00-04020130008 820-000633 65 10 375 272 200 18820-0080-00-04020120008 820-000634 80 6 385 274 200 18820-0100-00-04020120008 820-000635 100 6 405 284 200 20820-0125-00-04020120008 820-000636 125 6 420 298 200 22820-0150-00-04020120008 820-000637 150 6 435 310 200 23820-0200-00-04020120008 820-000638 200 6 465 381 200 27820-0250-00-04020120008 820-000639 250 6 459 474 313 47820-0300-00-04020120008 820-000640 300 6 495 549 313 58820-0350-00-04020120008 820-000641 350 6 541 573 313 70820-0400-00-04020120008 820-000642 400 6 649 714 462 121820-0450-00-04060021008 * 820-000643 450 6 681 745 462 159820-0500-00-04060021008 * 820-000644 500 6 716 802 611 225820-0600-00-04060021008 * 820-000645 600 6 811 907 552 280820-0700-00-04060021008 * 820-000646 700 6 868 958 532 371820-0800-00-04060021008 * 820-000648 800 6 930 1012 532 601820-0900-00-04060021008 * 820-001251 900 6 1010 1102 604 602

* with 100 my PUR coating

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With single acting nos. mm class mm mm mm weight kg pneumatic actuator

820-0025-00-04020160006 820-000469 25 16 232 105 204 4.8820-0032-00-04020160006 820-000470 32 16 232 105 204 4.8820-0040-00-04020160006 820-000471 40 16 252 105 204 5.4820-0050-00-04020130006 820-000472 50 10 270 119 241 7.7820-0065-00-04020130006 820-000473 65 10 285 119 241 8.3820-0080-00-04020120006 820-000474 80 6 295 119 241 8.7820-0100-00-04020120006 820-000475 100 6 327 131 259 12820-0125-00-04020120006 820-000476 125 6 370 149 304 18820-0150-00-04020120006 820-000477 150 6 385 149 304 19820-0200-00-04020120006 820-000478 200 6 447 183 395 31820-0250-00-04020120006 820-000479 250 6 550 223 473 55820-0300-00-04020120006 820-000480 300 6 586 223 473 64820-0350-00-04020120006 820-000481 350 6 679 284 605 112820-0400-00-04020120006 820-000482 400 6 745 319 710 154820-0450-00-04060021006 * 820-000483 450 6 857 418 855 263820-0500-00-04060021006 * 820-000484 500 6 915 393 1573 275820-0600-00-04060021006 * 820-000485 600 6 1020 423 1583 552820-0700-00-04060021006 * 820-000486 700 6 1148 448 1596 699820-0800-00-04060021006 * 820-000488 800 6 1288 518 2043 955820-0900-00-04060021006 * 820-001247 900 6 1357 518 2043 1070

* with 100 my PUR coating

W

W3

W1

Ce

ntr

ic,

loo

se l

ine

r

W3

W

W1

Page 33: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 33

Centric lug butterfly valve with loose liner, for drinking water to max. 70° C. Designed according to EN 593.Face to face according to DIN/EN 558-1, series 20 (K1). Standard flange drilling to EN1092-2 (ISO 7005-2).Hydraulic test according to EN 12266-1, P10/P12. Approved according to DIN-DVGW Certificate NW-6201BS0394, ACS Certificate 10 ACC LI 038 and SVGW Certificate No. 9901-4048.

Lug butterfly valve with threaded lugs, centric type with loose EPDM rubber liner with DVGW, SVGW and ACS approval.Long neck one-piece body of ductile iron GJS-450-15 (GGG-40) coated with 100 μm epoxy. Shaft of stainless steel AISI 420 and disc of acid-resistant stainless steel 1.4408.O-ring of NBR rubber and bolts of stainless steel A2.Working pressure: 16 or 10 bar.According to PED 97/23/EC appendix 1.

AVK LuG BuTTERfLy VALVE, PN 10/16 820/10Centric with loose liner, bare shaft 029

R

PS (bar) at 20º

DISC

SHAFTLINER

BODY

FIG.

TS IN °C

1 0 2 7

InterApp

PNDN

H2

W2

L2

DN 25-65 DN 80-100 DN 125-150 DN 200-400

W3

L2 L2 L2

Top flange to ISO 5211

DN mm DN mmF2: 25-150: 19 F: 25-40: 8 200: 25 50-100: 11 250-300: 32 125-150: 14 350-400: 40 200: 17 250-350: 22L5: 25-200: 12 400: 27 250-400: 18 DN FlangeDS: 25-200: 9 ISO: 25-200: F07 250: 10 250: F10 300-400: 13 300-400: F12

ds

W1W

1

3

5

6

4

L

W4

2

7

L1

WF

L5

F2

1. Bolt2. Retaining washer3. O-ring

4. Shaft5. Body6. Liner

7. Disc

AVKI DN PN PN L L2 H2 W2 W3 L1 W4 W W1 Theoretical AVK ref. nos. nos. mm class drilling mm mm mm mm mm mm mm mm mm weight kg

820-0025-10-04020160002 820-000907 25 16 10/16 30 101 51 110 129 3 19 90 70 1.4820-0032-10-04020160002 820-000908 32 16 10/16 30 101 51 110 129 3 19 90 70 1.4820-0040-10-04020160002 820-000909 40 16 10/16 33 108 54 130 149 6 28 90 70 2.0820-0050-10-04020160002 820-000910 50 16 10/16 43 116 72 135 154 6 32 90 70 3.2820-0065-10-04020160002 820-000911 65 16 10/16 46 131 82 150 169 11 50 90 70 4.0820-0080-10-04020160002 820-000912 80 16 10/16 46 188 92 160 179 19 69 90 70 6.1820-0100-10-04020160002 820-000913 100 16 10/16 52 219 102 180 199 26 88 90 70 8.5820-0125-10-04020160002 820-000914 125 16 10/16 56 248 120 195 214 36 115 90 70 10820-0150-10-04020160002 820-000915 150 16 10/16 56 274 133 210 229 48 141 90 70 11820-0200-10-04020030002 820-000916 200 10 10 60 332 163 240 265 72 194 90 70 20820-0250-10-04020030002 820-000917 250 10 10 68 402 196 279 311 91 240 155 125 29820-0300-10-04020030002 820-000918 300 10 10 78 472 232 315 347 112 290 155 125 41820-0350-10-04020030002 820-000919 350 10 10 80 520 257 330 370 130 330 155 125 55820-0400-10-04020030002 820-000920 400 10 10 102 584 292 365 375 145 377 155 125 75

R

PS (bar) at 20º

DISC

SHAFTLINER

BODY

FIG.

TS IN °C

1 0 2 7

InterApp

PNDN

H2

W2

L2

DN 25-65 DN 80-100 DN 125-150 DN 200-400

W3

L2 L2 L2

Top flange to ISO 5211

DN mm DN mmF2: 25-150: 19 F: 25-40: 8 200: 25 50-100: 11 250-300: 32 125-150: 14 350-400: 40 200: 17 250-350: 22L5: 25-200: 12 400: 27 250-400: 18 DN FlangeDS: 25-200: 9 ISO: 25-200: F07 250: 10 250: F10 300-400: 13 300-400: F12

ds

W1W

1

3

5

6

4

L

W4

2

7

L1

WF

L5

F2

Page 34: AVK Butterfly Valve Brochure

34 | Butterfly valves for drinking water

AVK LuG BuTTERfLy VALVE 820/10Centric with loose liner

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With gearbox nos. mm class mm mm mm Weight kg

820-0025-10-04020160003 820-000229 25 16 187 172 141 2.2820-0032-10-04020160003 820-000230 32 16 187 172 141 2.2820-0040-10-04020160003 820-000231 40 16 207 175 141 2.8820-0050-10-04020160003 820-000232 50 16 212 179 141 4.0820-0065-10-04020160003 820-000233 65 16 227 187 141 4.8820-0080-10-04020160003 820-000234 80 16 237 215 141 6.9820-0100-10-04020160003 820-000235 100 16 257 231 141 9.3820-0125-10-04020160003 820-000236 125 16 272 245 141 11820-0150-10-04020160003 820-000237 150 16 317 316 171 12820-0200-10-04020030003 820-000238 200 10 347 345 171 20820-0250-10-04020030003 820-000239 250 10 432 410 231 30820-0300-10-04020030003 820-000240 300 10 468 445 231 43820-0350-10-04020030003 820-000241 350 10 570 636 363 60820-0400-10-04020030003 820-000242 400 10 705 688 463 80

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With double acting nos. mm class mm mm mm weight kg pneumatic actuator

820-0025-10-04020160005 820-000389 25 16 215 92 154 3.1820-0032-10-04020160005 820-000390 32 16 215 92 154 3.1820-0040-10-04020160005 820-000391 40 16 235 92 154 3.7820-0050-10-04020130005 820-000392 50 10 240 92 154 4.9820-0065-10-04020130005 820-000393 65 10 255 92 154 5.7820-0080-10-04020120005 820-000394 80 6 282 105 204 9.0820-0100-10-04020120005 820-000395 100 6 302 105 204 11820-0125-10-04020120005 820-000396 125 6 317 105 204 13820-0150-10-04020120005 820-000397 150 6 345 119 241 15820-0200-10-04020020005 820-000398 200 6 387 131 259 25820-0250-10-04020020005 820-000399 250 6 466 159 333 40820-0300-10-04020020005 820-000400 300 6 522 183 395 56820-0350-10-04020020005 820-000401 350 6 556 201 423 73820-0400-10-04020020005 820-000402 400 6 660 245 528 110

W

W3

W1

W1

Ce

ntr

ic,

loo

se l

ine

r

W3

W

W1

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With lever nos. mm class mm mm mm weight kg

820-0025-10-040201600 820-000085 25 16 151 231 46 1.8820-0032-10-040201600 820-000086 32 16 151 231 46 1.8820-0040-10-040201600 820-000087 40 16 171 234 46 2.4820-0050-10-040201600 820-000088 50 16 176 238 46 3.6820-0065-10-040201600 820-000089 65 16 191 246 46 4.4820-0080-10-040201600 820-000090 80 16 203 337 46 6.6820-0100-10-040201600 820-000091 100 16 223 353 46 9.0820-0125-10-040201600 820-000092 125 16 246 464 46 11820-0150-10-040201600 820-000093 150 16 261 477 46 12820-0200-10-040200300 820-000094 200 10 291 506 46 20820-0250-10-04020030001 820-000095 250 10 319 701 78 30820-0300-10-04020030001 820-000096 300 10 355 736 78 43

W3

W

W1

Page 35: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 35

AVK ref. nos. AVK DN PN W3 W W1 Theoretical With single acting nos. mm class mm mm mm weight kg pneumatic actuator

820-0025-10-04020160006 820-000549 25 16 232 105 204 4.8820-0032-10-04020160006 820-000550 32 16 232 105 204 4.8820-0040-10-04020160006 820-000551 40 16 252 105 204 5.4820-0050-10-04020130006 820-000552 50 10 270 119 241 7.9820-0065-10-04020130006 820-000553 65 10 285 119 241 8.7820-0080-10-04020120006 820-000554 80 6 295 119 241 11820-0100-10-04020120006 820-000555 100 6 327 131 259 15820-0125-10-04020120006 820-000556 125 6 370 149 304 20820-0150-10-04020120006 820-000557 150 6 385 149 304 21820-0200-10-04020020006 820-000558 200 6 447 183 395 38820-0250-10-04020020006 820-000559 250 6 550 223 473 62820-0300-10-04020020006 820-000560 300 6 586 223 473 74820-0350-10-04020020006 820-000561 350 6 679 284 605 125820-0400-10-04020020006 820-000562 400 6 745 319 710 172

AVK LuG BuTTERfLy VALVE 820/10Centric with loose liner

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With electric actuator nos. mm class mm mm mm weight kg

820-0025-10-04020160008 820-000709 25 16 335 319 200 17820-0032-10-04020160008 820-000710 32 16 335 319 200 17820-0040-10-04020160008 820-000711 40 16 355 319 200 17820-0050-10-04020130008 820-000712 50 10 360 261 200 17820-0065-10-04020130008 820-000713 65 10 375 269 200 18820-0080-10-04020120008 820-000714 80 6 385 297 200 20820-0100-10-04020120008 820-000715 100 6 405 313 200 22820-0125-10-04020120008 820-000716 125 6 420 327 200 24820-0150-10-04020120008 820-000717 150 6 435 340 200 25820-0200-10-04020020008 820-000718 200 6 465 412 200 34820-0250-10-04020020008 820-000719 250 6 459 513 313 54820-0300-10-04020020008 820-000720 300 6 495 596 313 68820-0350-10-04020020008 820-000721 350 6 541 620 313 83820-0400-10-04020020008 820-000722 400 6 649 768 462 139

W

W3

W1

W3

W1

W

Page 36: AVK Butterfly Valve Brochure

36 | Butterfly valves for drinking water

Centric U-section butterfly valve with loose liner, for drinking water to max. 70° C. Designed according to EN 593.Face to face according to DIN/EN 558-1, series 20 (K1). Standard flange drilling to EN1092-2 (ISO 7005-2).Hydraulic test according to EN 12266-1, P10/P12. Approved according to DIN-DVGW Certificate NW-6201BS0394, ACS Certificate 10 ACC LI 038 and SVGW Certificate No. 9901-4048.

U-section butterfly valve, centric type with loose EPDM rubber liner with DVGW, SVGW and ACS approval.Long neck one-piece body of ductile iron GJS-450-15 (GGG-40) coated with 100 μm epoxy up to DN 400 and 100 μm polyurethane from DN 450. Shaft of stainless steel AISI 420 and disc of acid-resistant stainless steel 1.4408. From DN 450 mounted with two self-lubricating shaft bearings of bronze. O-ring of NBR rubber and bolts of stainless steel A2.Working pressure: 16 or 10 bar.According to PED 97/23/EC appendix 1.

AVK u-SECTION BuTTERfLy VALVE, PN 10/16 820/20Centric with loose liner, bare shaft 025

1. Bolt2. Retaining washer3. O-ring

4. Shaft5. Body6. Liner

7. Disc

H2

W2

L2

W3 WW1

Ds

Top flange to ISO 5211

DN mm F2: 150: 19 200: 25 250-300: 32 350-400: 40 450-500: 65 600-800: 80 900-1100: 100 1200-1400: 120 1600: 155 L5: 150-200: 12 250-400: 18 450-700: 25 800-1200: 30 1400: 35 1600 40 DS: 150-200: 9 250: 10 300-400: 13 450-500: 18 600: 22 700-800: 18 900-1400: 22 1600: 33,5

DN mmF: 150: 14 200: 17 250-350: 22 400: 27 450-500: Ø 45 600-800: Ø 70 900-1100: Ø 80 1200: Ø 100 1400: Ø 120 1600: Ø 130 DN FlangeISO: 150-200: F07 250: F10 300-400: F12 450-500: F14 600: F16 700-800: F25 900-1400: F30 1600: F35

1

3

5

6

4

L

W4

2

7

L1

WF

L5

F2

H2

W2

L2

W3 WW1

Ds

Top flange to ISO 5211

DN mm F2: 150: 19 200: 25 250-300: 32 350-400: 40 450-500: 65 600-800: 80 900-1100: 100 1200-1400: 120 1600: 155 L5: 150-200: 12 250-400: 18 450-700: 25 800-1200: 30 1400: 35 1600 40 DS: 150-200: 9 250: 10 300-400: 13 450-500: 18 600: 22 700-800: 18 900-1400: 22 1600: 33,5

DN mmF: 150: 14 200: 17 250-350: 22 400: 27 450-500: Ø 45 600-800: Ø 70 900-1100: Ø 80 1200: Ø 100 1400: Ø 120 1600: Ø 130 DN FlangeISO: 150-200: F07 250: F10 300-400: F12 450-500: F14 600: F16 700-800: F25 900-1400: F30 1600: F35

1

3

5

6

4

L

W4

2

7

L1

WF

L5

F2

AVKI DN PN PN L L2 H2 W2 W3 L1 W4 W W1 Theoretical AVK ref. nos. nos. mm class drilling mm mm mm mm mm mm mm mm mm weight kg

820-0150-20-04020160002 820-001046 150 16 10/16 56 285 133 210 229 48 141 90 70 15820-0200-20-04020130002 820-001047 200 10 10 60 340 163 240 265 72 194 90 70 20820-0250-20-04020130002 820-001048 250 10 10 68 406 196 279 311 91 240 155 125 30820-0300-20-04020130002 820-001049 300 10 10 78 482 232 315 347 112 290 155 125 44820-0350-20-04020130002 820-001050 350 10 10 80 533 257 330 370 130 330 155 125 59820-0400-20-04020130002 820-001051 400 10 10 102 597 292 365 375 145 377 155 125 82820-0450-20-04060031002 * 820-001052 450 10 10 113 640 355 397 462 164 425 175 140 118820-0500-20-04060031002 * 820-001053 500 10 10 126 715 393 437 502 182 474 175 140 175820-0600-20-04060031002 * 820-001054 600 10 10 153 840 464 522 602 218 569 220 165 260820-0700-20-04060031002 * 820-001055 700 10 10 168 927 503 565 645 257 660 300 254 345820-0800-20-04060031002 * 820-001056 800 10 10 190 1060 577 627 707 304 774 300 254 510820-0900-20-04060031002 * 820-000859 900 10 10 204 1170 643 696 776 337 855 350 298 660820-1000-20-04060031002 * 820-000860 1000 10 10 216 1255 693 745 875 383 960 350 298 790820-1100-20-04060031002 * 820-000861 1100 10 10 218 1395 738 820 920 429 1054 350 298 850820-1200-20-04060031002 * 820-000862 1200 10 10 254 1485 806 881 1001 462 1149 350 298 1180820-1400-20-04060031002 * 820-000863 1400 10 10 280 1746 908 990 1110 543 1336 350 298 1700820-1600-20-04060031002 * 820-000864 1600 10 10 318 1924 1048 1117 1272 634 1553 418 356 2600

* with 100 my PUR coating

Ce

ntr

ic,

loo

se l

ine

r

Page 37: AVK Butterfly Valve Brochure

Butterfly valves for drinking water | 37

AVK u-SECTION BuTTERfLy VALVE 820/20 Centric with loose liner

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With gearbox nos. mm class mm mm mm weight kg

820-0150-20-04020160003 820-001079 150 16 317 322 171 9.5820-0200-20-04020130003 820-001080 200 10 347 349 171 14820-0250-20-04020130003 820-001081 250 10 432 412 231 24820-0300-20-04020130003 820-001082 300 10 468 450 231 32820-0350-20-04020130003 820-001083 350 10 570 643 363 47820-0400-20-04020130003 820-001084 400 10 705 695 463 63820-0450-20-04060031004 * 820-001085 450 10 795 666 565 117820-0500-20-04060031004 * 820-001086 500 10 792 745 573 157820-0600-20-04060031004 * 820-001087 600 10 827 867 604 212820-0700-20-04060031004 * 820-001088 700 10 920 911 654 325820-0800-20-04060031004 * 820-001089 800 10 936 993 683 580820-0900-20-04060031004 * 820-000169 900 10 1005 1030 683 730820-1000-20-04060031004 * 820-000170 1000 10 1104 1085 733 860820-1100-20-04060031004 * 820-000171 1100 10 1129 1206 777 950820-1200-20-04060031004 * 820-000172 1200 10 1190 1276 777 1280820-1400-20-04060031004 * 820-000173 1400 10 1485 1344 906 1925820-1600-20-04060031004 * 820-000174 1600 10 1612 1494 906 2825

* with 100 my PUR coating

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With single acting nos. mm class mm mm mm weight kg pneumatic actuator

820-0150-20-04020120006 820-001167 150 6 385 149 304 19820-0200-20-04020120006 820-001168 200 6 447 183 395 31820-0250-20-04020120006 820-001169 250 6 550 223 473 55820-0300-20-04020120006 820-001170 300 6 586 223 473 64820-0350-20-04020120006 820-001171 350 6 679 284 605 112820-0400-20-04020120006 820-001172 400 6 745 319 710 154820-0450-20-04060021006 * 820-001173 450 6 857 418 855 263820-0500-20-04060021006 * 820-001174 500 6 915 393 1573 440820-0600-20-04060021006 * 820-001175 600 6 1020 423 1583 570820-0700-20-04060021006 * 820-001176 700 6 1148 448 1596 749820-0800-20-04060021006 * 820-001177 800 6 1288 518 2043 1063820-0900-20-04060021006 * 820-000489 900 6 1357 518 2043 1288820-1000-20-04060021006 * 820-000490 1000 6 1415 546 2779 1720820-1100-20-04060021006 * 820-000491 1100 6 1490 546 2779 1735820-1200-20-04060021006 * 820-000492 1200 6 1634 573 2283 2342820-1400-20-04060021006 * 820-000493 1400 6 1777 710 3017 3262820-1600-20-04060021006 * 820-000494 1600 6 1985 845 3365 4617

* with 100 my PUR coating

AVK ref. nos. AVKI DN PN W3 W W1 Theoretical With double acting actuator nos. mm class mm mm mm weight kg

820-0150-20-04020120005 820-001123 150 6 345 119 241 13820-0200-20-04020120005 820-001124 200 6 387 131 259 18820-0250-20-04020120005 820-001125 250 6 466 159 333 33820-0300-20-04020120005 820-001126 300 6 522 183 395 46820-0350-20-04020120005 820-001127 350 6 556 201 423 60820-0400-20-04020120005 820-001128 400 6 660 245 528 92820-0450-20-04060021005 * 820-001129 450 6 746 284 605 151820-0500-20-04060021005 * 820-001130 500 6 817 319 710 203820-0600-20-04060021005 * 820-001131 600 6 955 371 812 303820-0700-20-04060021005 * 820-001132 700 6 1025 418 855 407820-0800-20-04060021005 * 820-001133 800 6 1087 418 855 637820-0900-20-04060021005 * 820-000329 900 6 1294 528 950 861820-1000-20-04060021005 * 820-000330 1000 6 1343 528 950 991820-1100-20-04060021005 * 820-000331 1100 6 1331 468 1375 1109820-1200-20-04060021005 * 820-000332 1200 10 1401 548 1460 1481820-1400-20-04060021005 * 820-000333 1400 10 1660 598 1465 2080820-1600-20-04060021005 * 820-000334 1600 10 1822 685 1672 3208

* with 100 my PUR coating

W

W3

W1

W1

W

W3

W1

W1

W3

W

Page 38: AVK Butterfly Valve Brochure

AVK BuTTERfLy VALVES, CENTRIC WITh LOOSE LINER - TORQuES 820

u-section butterfly valves series 820/20

AVK ref. nos. DN PN W3 W W1 Theoretical With electric actuator mm class mm mm mm weight kg

820-0150-20-04020120008 820-001211 150 16 435 346 200 23820-0200-20-04020120008 820-001212 200 10 465 416 200 27820-0250-20-04020120008 820-001213 250 10 459 515 313 47820-0300-20-04020120008 820-001214 300 10 495 601 313 58820-0350-20-04020120008 820-001215 350 10 541 627 313 70820-0400-20-04020120008 820-001216 400 10 649 775 462 121820-0450-20-04060021008* 820-001217 450 10 681 796 462 159820-0500-20-04060021008* 820-001218 500 10 716 862 611 225820-0600-20-04060021008* 820-001219 600 10 811 979 552 280820-0700-20-04060021008* 820-001220 700 10 868 1022 532 371820-0800-20-04060021008* 820-001221 800 10 930 1088 532 601820-0900-20-04060021008* 820-000649 900 10 1010 1179 604 760820-1000-20-04060021008* 820-000650 1000 10 1059 1222 604 890820-1100-20-04060021008* 820-000651 1100 10 1129 1206 777 950820-1200-20-04060021008* 820-000652 1200 10 1190 1276 777 1280820-1400-20-04060021008* 820-000653 1400 10 1485 1344 906 1925820-1600-20-04060021008* 820-000654 1600 10 1612 1494 906 2825

* with 100 my PUR coating

max. operating torques - series 820 centric butterfly valves with loose liner

max. working pressure [bar]

DN 6 10 16

25-40 - 14 20 50 23 27 42 65 26 32 39 80 36 57 69 100 55 76 80 125 69 92 124 150 96 134 138 200 128 165 224 250 270 324 446 300 378 473 662 350 574 945 1080 400 1215 1350 1688 450 1820 2600 3120 500 2600 3250 3900 600 4200 5200 6000 700 4400 5720 6800 750 5200 7020 8400 900 6500 8300 104001000 8200 10400 126001100 10500 13000 154001200 13200 15600 188001400 20000 37000 450001600 26600 49200 -

Ce

ntr

ic,

loo

se l

ine

r

38 | Butterfly valves for drinking water

Page 39: AVK Butterfly Valve Brochure

AVK BuTTERfLy VALVES, CENTRIC WITh LOOSE LINER - KV VALuES 820

0

50000

100000

150000

200000

250000

20° 30° 40° 50° 60° 70° 80° 90°

Kv-

valu

e

Disc position

DN700

DN800

DN900

DN1000

DN1200

DN1400

DN1600

DN 700-1600

0

5000

10000

15000

20000

25000

30000

20° 30° 40° 50° 60° 70° 80° 90°

Kv-

valu

e

Disc position

DN200

DN250

DN300

DN350

DN400

DN450

DN500

DN600

DN 200-600

Butterfly valves for drinking water| 39

Page 40: AVK Butterfly Valve Brochure

AVK DOuBLE ECCENTRIC BuTTERfLy VALVES - TORQuES AND ZETA VALuES 756

max. operating torques on input shaft of gearbox - series 756 double eccentric butterfly valves

DN PN 10 PN 16 Max. torque Handwheel Max. torque Handwheel Nm mm Nm mm

200 30-100 250 30-100 250 250 30-100 250 30-100 250 300 30-100 250 30-100 250 350 30-100 250 30-100 400 400 30-100 400 90-140 400 450 90-140 400 90-140 500 500 90-140 400 90-140 500 600 90-170 500 90-170 600 700 90-170 600 90-170 700 800 90-170 600 90-170 700 900 90-170 700 90-170 7001000 90-170 700 90-170 6001200 90-170 600 90-170 7001400 90-170 700 90-170 7001600 90-170 700 90-170 7001800 90-170 700 90-170 7002000 90-170 700 90-170 7002200 90-170 700 90-170 7002400 90-170 700 90-170 700

NB: The torques are considerably below the torques specified in EN 12570

Zeta value - series 756 double eccentric butterfly valves

Do

ub

le e

cc

en

tric

Zeta value DN 200-2400

10° 20° 30° 40° 50° 60° 70° 80° 90° Disc position

1000

900

800

700

600

500

400

300

200

100

0

Zet

a va

lue

40 | Butterfly valves for drinking water

Page 41: AVK Butterfly Valve Brochure

AVK DOuBLE ECCENTRIC BuTTERfLy VALVES - KV VALuES 756

DN 200-600

DN 700-2400

NB: AVK series 756 butterfly valves are on/off valves - the Kv values are stated with regards to filling/emptying

DN700

DN800

DN900

DN1000

DN1200

DN1400

DN1600

DN1800

DN2000

DN2200

DN2400

10° 20° 30° 40° 50° 60° 70° 80° 90° Disc position

600000

500000

400000

300000

200000

100000

0

Kv-

valu

e

DN200

DN250

DN300

DN350

DN400

DN450

DN500

DN600

10° 20° 30° 40° 50° 60° 70° 80° 90° Disc position

30000

25000

20000

15000

10000

5000

0

Kv-

valu

e

Butterfly valves for drinking water| 41

Page 42: AVK Butterfly Valve Brochure

max. operating torques - series 75 centric butterfly valves with fixed liner

max. working pressure [bar]

DN 6 10 16

50 10 10 11 65 13 14 15 80 18 19 21 100 30 32 36 125 42 46 52 150 67 75 86 200 130 140 160 250 220 250 400 300 310 350 560

Kv values m3/h - series 75 centric butterfly valves with fixed liner

Fully open valve Fully open valve DN Stainless steel disc Ductile iron disc

50 95 - 65 231 - 80 491 - 100 690 - 125 1450 - 150 1945 - 200 4095 - 250 6085 4260 300 9570 6360 350 13500 8975 400 16350 10130 450 21550 12730 500 17000 17000 600 24810 24810 700 34470 34470 800 45540 45540 900 58290 58290 1000 73510 73510

Series 76 centric butterfly valves with loose liner

max. Kv values DN working pressure m3/h 16 [bar] Fully open valve

50 13 91 65 20 206 80 28 436 100 44 660 125 76 1300 150 110 2100 200 210 4100 250 315 6090 300 440 9570

Ce

ntr

ic

AVK BuTTERfLy VALVES, CENTRIC - TORQuES AND KV VALuES 75 & 76

42 | Butterfly valves for drinking water

Page 43: AVK Butterfly Valve Brochure

INSTALLATION SITuATIONS & OThER VALVES IN ThE RANGE

Dynaxe - double eccentricFor high performance up to 50 bar.Body of cast steel, stainless steel, duplex, alubronze or titanium.With RTFE or metal seat. Wafer, lug and double flanged.

Bianca - centric For aggressive and corrosive fluids and high purityapplications.Ductile iron body withchambered liner and elastomer back-up.With PTFE or Ultraflon liner. Disc of polished 316L, PFA coated or titan.Wafer, lug and U-section.

Centric with loose linerFor normal duty or for frequent operation in sewage aeration/HVAC applications.For industrial applications.Wafer, lug and U-section.

Centric with fixed liner For sewage, gas and firefighting applications.Wafer, semi lug, lug, mono flange and double flanged.

Semi lug with long neck

Wafer Double flanged U-section

Semi lug Mono flange Lug

Characteristic installation situations for different body types

Other valves in the AVK range of butterfly valves

Butterfly valves for drinking water| 43

Page 44: AVK Butterfly Valve Brochure

2013-01-08Copyright©AVK Group A/S 2013

AVK INTERNATIONAL A/SBizonvej 1, SkovbyDK-8464 Galten, DenmarkTel.: +45 87 54 21 00Fax: +45 87 54 21 20 E-mail: [email protected]

Printed matter