A Hilco Global CompanyVested in Your Success

31555 West Fourteen Mile Road, Suite 301Farmington Hills, Michigan 48334 USAPh 248-254-9999 • Fx 248-254-9995

www.hilcoind.com

Calgary, Alberta, CANADA

Coil Tubing and Nitrogen/Fluid PumpingService Tractors, Trailers

& Support Equipment

EQUIPMENT NO LONGER REQUIRED TO THE ONGOING OPERATIONS OF LEADER ENERGY

AVAILABLE NOW

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

HilcoTM Industrial

2007

EQUIPMENT NO LONGER REQUIRED

TO THE ONGOING OPERATIONS OF

LEADER ENERGY

700, 706 - 7 Avenue SWCalgary, Alberta T2p0z1CAnAdA

COIL TUBING TRUCKS, TRAILERS,HYDRAULIC POWER UNITS & SUPPORT

Providing a Full Range of Coiled Tubing Services with a Depth Capacity of 5,600 Meters

(2) COIL TUBING UNIT PACKAGES

AVAILABLE NOW

Please SubmitOffers

or Inquiries at

www.hilcoind.comOr Contact

Jody Bacque at

+1 251-404-2367 or

jbacque@hilcoglobal.com

For more information, please visit us on the web at www.hilcoind.com 3

(2) COIL TUBING UNIT PACKAGES

VISIT OUr WEBSITE TO SUBmIT OFFErSwww.hilcoind.com

COIL TUBING UNIT #1 (OFFErED IN BULk, SUBjECT TO PIECEmEAL)1 – NO. 42004 TRAILER MOUNTED COIL TUBING UNIT, VIN 2PLC052307BE12836

(2007), Consisting of: (Connected to Unit 41004) 2007 Peerless CH-52-3A Tri-Axle Trailer, 115,159 km, Axles Rated at 22,000 Lbs. Mounted on Air RideSuspension, 11R24.5 Tires, 16mm Remaining Tread, Steel Fabricated Deck, (2)Hydraulic & (2) Manual Deck Leveling Jacks, Custom Quick Connect Panel, (7) DoorUnder Deck Lockable Storage Bins (Upgraded in 2010) Hydra Rig Model RT-60 TubingInjector, Rated at 60,000 Lbs. Pulling, 30,000 Lbs. Pushing, 200 fpm Max Speed, Set upfor 2" Tubing, Vanoil 3.06 Stripper, Aeroquip Quick Disconnect, 120 gpm Motor FlowSetting, Manual Injector Brakes, Aluminum Telescoping Long Legs. (2) Hydraulic HoldDown Boxes, Trailer Mounted Controls, Fall Protection Device, IC-2000 Counter,Electronic Load Cells, Fold Down Walk Way, Lifting Slings Control Cab, Approx 6' x 7',with Data Acquisition Software, Dual Scale Gauges, Controls, Instrumentation, Heat,AC, Lights Lee's Quad BOP Assembly, 5-1/8" x 10,000 psi, Lubricator, Stripper

1 – NO. 41004 TRI-DRIVE WITH HYDRAULIC POWER UNIT TRACTOR, VIN 1XKDP4EX57R997159 (2007), Consisting of: (Connected to Trailer 42004)2007 Kenworth T800 Tri-Axle Tractor – 182,996 Kilometers Indicated, 21,419Indicated Hours, Powered by Cummins Model ISX600 Turbo Charged DieselEngine, S/N 79180651 Rated at 600-HP at 1,800-RPM Unitized with Eaton ModelRTLO-18918B, 18-Speed Manual Transmission, 16,000-Lbs. Single Steer FrontAxle Mounted on 11R24.5 Tires, 20,000-Lb. Tandem Rear Axles Mounted on11R24.5 Tires, Tractor is Equipped with 36" Sleeper, CB 2-Way Radio, EmergencyBeacons, Chains, Etc. 2010 Kincor Wet Kit, Consisting of: 5,780-Hours at Time ofInspection, Stacking Square Tubing Custom Constructed Frame, Stamford ModelPI044E1, 10-KVA Generator, S/N X06H320375, Energized by Kubota ModelD1105-BG-ET01 Diesel Engine, S/N AKBXL01.5BCC, Rated at 17-HP at 1,800-RPM, Engine is Fitted with OMSI Model PFT-PCV/3000 Transmission,Denison Model P14P3R1C4A2A Main Hydraulic Pump, S/N 002000545, ThermalExchanger, Reservoir, Instrumentation Panel, Quick Connect Board

3 – REELS, SPOKE STYLE STEEL TUBING CONSTRUCTED TUBING REEL(42004)

COIL TUBING UNIT #2 (OFFErED IN BULk, SUBjECT TO PIECEmEAL)1 – NO. 42001 MOUNTED COIL TUBING UNIT, VIN 2D9LGFZ30R1016030 (1994),

Consisting of: (Connected to Unit 41001) DoePecker Tri-Axle Trailer VIN 2D9LGFZ30R1016030 (1994) 81,265 Indicated Hours, Axles Rated at 20,000-Lbs.Mounted on Air Ride Suspension, with 11R24.5 Tires, with Approx. 12-mm of TreadRemaining, Steel Fabricated Deck, with (2) Hand Operated Leveling Jacks, CustomDesigned and Fabricated Quick Connect Panel & (2) Door Under Deck Lockable StorageBins Spoke Style Steel Tubing Constructed Tubing Reel – 106" OD x 61" Core x 48" WCapable of Carrying, 4,500-m of 1-1/4" Tubing, Chain Driven by a Danfoss HydraulicMotor & is Fitted Pneumatic Brakes, with Traverse Mounted Spooler & 10,000-PSICirculating Iron 40 Injector S/N 35111005 with 40,000-Lb. Continuous Push / Pull Rating,120-3 Out Side Chain, 60-3 Inside Roller Chain, (2) Pair Skate Cylinders, Spring ChainTensioner, Standard Hydraulic Leveling Bail Arm, Velocity Fuse on Inside of Skate Circuit,Mechanical Snubbing Locks on Outside Chain Tension, Motion Control and Lock Valve,Fail Safe Brakes on Injector Drive Motors and Stripper Pac-Off Hiab Cranes Model M7-200C 7-Ton Capacity Injector Boom SN-1471 with McKisssick 4-Ton Swivel HookControl Cab, Approx. 6'W x 7'L, with Data Acquisition Software, Dual Scale Gauges,Controls, Instrumentation, Heat, AC, Light, Etc. Vaniol Model #P306QB10 Quad BOPAssembly SN-P07118 3-1/16" x 10,000-PSI, Lubricator & Stripper Tubing InventoryApprox. 3,500-m of 1-1/4" Pipe Condition is Est. at 50% of New

1 – NO. 41001 TANDEM TRACTOR WITH HYDRAULIC POWER UNIT TRACTOR,VIN 1XXDD40X67R930814 (2007), Consists of: (Connected with Trailer 42001) 2007Kenworth Model T800 Tandem Axle Tractor – 185,187 Kilometers Indicated, 12,941Hours Indicated, Powered by Cummins Model ISX565 Turbo Charged Diesel Engine,Rated at 600-HP at 1,800-RPM Unitized with Eaton Model RTLO-18918B, 18-SpeedManual Transmission Tractor has 13,200-Lbs. Single Steer Front Axle Mounted on11R24.5 Tires, (2) 23,000-Lb. Tandem Rear Axles Mounted on 11R24.5 Tires, 36" Sleeper,CB 2-Way Radio, Emergency, Chains, Etc. Kincor Wet Kit, Consisting of: Stacking SquareTubing Custom Constructed Frame, Stamford Model PI044E1, 10-KVA Generator, S/N X10A020067, Energized by Kubota Model D1105-BG-ET01 Diesel Engine Rated at17-HP at 1,800-RPM, Engine is Fitted with OMSI Model PFT-PCV/3000 Transmission, S/N AKBXL01.5BCC, Denison Model P14P3R1C4A2A Main Hydraulic Pump, S/N 01072141, Thermal Exchanger, Reservoir, Instrumentation Panel, Quick Connect Board

3 – REELS, SPOKE STYLE STEEL TUBING CONSTRUCTED TUBING REEL (42001)

NITROGEN PUMPING UNITS • FLUID PUMPING RIG

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)4

2007

2012

NITrOGEN PUmPING UNITS2 – NO’s. 20015 & 20014 FLAMELESS NITROGEN PUMPING UNITS,

180,000 At 10,000 PSI Tractors, VINs 1NKDX4EX37R930179,1NKDX4EX27R992916 (Both 2007), Consisting of: 2007 KenworthT800B Tri-Drive Tractor 145,422 Kilometers Indicated, 11,946 /14,XXX Hours Indicated, Powered by Cummins Model ISX600 TurboCharged Diesel Engine Rated at 600-HP at 1,800-RPM, Engine isUtilized with Eaton Model RTLO-18918B, 18-Speed ManualTransmission, 20,000-Lbs. Single Steer Front Axle Mounted on315/80R.22 Tires, (3) 20,000-Lb. Tri-Drive Rear Axles Mounted on11R24.5 Tires, Equipped with CB, 2-Way Radio, Emergency Beacons,Chains, etc. Osmi PFT-PCV/3000 Power Transfer Box EnergizingHydraulic Power Supply with Pump, Exchanger, Reservoir, Filters &Interconnecting Piping 2007 3,000 Gallon Cryogenic VesselAlternatives Liquid N2 Tank TC-341 with Glass Insulation andStainless Pumping, MAWP 45-PSI at 100° F, MDMT -320° F at 45-PSI,19,777-Lbs. Design Weight of Loading, 25,948-Lbs. Water Capacity,Designation Stamps Include U, W & RT2 2010 Cryocanada Model300PD Nitrogen Pump 10,000-PSI / 70-MPA, 85-M3 / Min. Max. Flow,Dresses with 1.625" in Cold Ends Cryogenic Model ACH18HDNitrogen Boost Pump Powered by Parker Model 3707308 HydraulicMotor Exchanger, Inc. Model C250 Heat Recovery System Thermal AirShroud, Glycol Exchanger, Glycol Pump & Circulation Pump, EachHydraulically Powered CS&P Model LN2 Secondary Heat Exchanger& Exhaust Vaporizer Pot Rated at 180,000-SCFH Custom Designedand Fabricated Deck Mounted Operators Cab 7-1/2'W x 4'L, withDrivers Side Man Door, Open Access to Tractor Cab, Aluminum WrapAround Control Housing, Lighting, Power Outlets and 3-Way WindowsSoftware System with Custom Designed and Fabricated ConsoleMounted Panel Facilitating Various Pressure & Temperature Gauges

FLUID PUmPING rIG1 – NO. 50002 TRUCK MOUNTED FLUID PUMPING

RIG, VIN 1NKDX4TX6CR953906 (2012), Consistingof: 2012 Kenworth Single Steer Tri-Drive Tractor –73,084 Kilometers Indicated, 4,867 Hours Indicated,Powered by Cummins Model ISX550 Turbo ChargedDiesel Engine, Rated at 550-HP at 1,800-RPMUnitized, with Allison Automatic Transmission,16,000-Lbs. Single Steer Front Axle Mounted on385/65R22.5 Tires, (3) 23,000-Lb. Tandem RearAxles Mounted on 11R24.5 Tires, Equipped with 36" Sleeper, CB, 2-Way Radio, Emergency, Chains,Etc. ACE Custom Designed and Fabricated Van Bodywith Sectioned Operator's Cabin, Sectioned Pumpand Tank Bay, Insulation, Wiring & Heating CustomDesigned and Fabricated Control Console (Mountedin Operator's Cabin), with LCD Panel, InstrumentationGauges, Hand Controls, Etc. Gardner Denver G-500Triplex Main Fluid Pump SN M11887008001, Rated at10,000-PSI, 500-BHP at 400-RPM, 6" Stroke GardnerDenver 4" x 4" Feed Pump Powered by ParkerHydraulic Motor Bowie 2" Transfer Pump Powered byHydraulic Pump Leader Friction Reducer Tank LeaderLube Oil Tank Qty. 2 – Exterior Mounted HoldingTanks 2-m3 each Piping, Consisting of: (10) Joints of10' x 2" x 15,000-PSI Line Pipe, Complete with Chic-Sans, Pups, Aimer Valves, Etc.

Submit Offersat

www.hilcoind.com

TANDEM AXLE TRACTOR • NITROGEN BULKERS • TRAILERS • SUPPORT EQUIPMENT

For more information, please visit us on the web at www.hilcoind.com 5

2000

TrAILErS1 – NO. 653 REEL, FLAT DECK TRAILER, VIN 2C9PF4522FC03403274 (1985), Consists

of: Chieftain 8'W x 40'L (approx measurements) Flat deck Trailer with Wood Plankingand Dual Landing Jacks, Trailer is Mounted on Spring Ride Tandem Axles, Equippedwith Steel Wheels Mounted on 11R24.5 Tires Unit #PP 102 – Hydraulic Power Unit,Consisting of: Daewoo Model D1146T Diesel Engine Rated, S/N EADOA407640 (New 2004), at 185-HP, 1,800-RPM, Hydraulic Pump, Reservoir, Hoses, Filters andInterconnecting Piping, Hours N/A

1 – PEERLESS MODEL CH-36-3A TRI-AXLE TRAILER, VIN 2PLC036356BK12576(2006), Axles are Rated at 22,000-Lbs. Mounted on Air Ride Suspension, with AirOperated Brakes, Trailer has Wiring & Pneumatic Plumbing to Brakes

1 – NO. 45001 XL SPECIALIZED X180 TRI-AXLE DOUBLE DROP DECK MECHANICALGOOSENECK TRAILER, VIN 4U3J05344L004574 (2004), Consists of: 8'W x 45'L withSteel Deck, Spring Ride Axles, Steel Wheels Mounted on 11R24.5 Tires

1 – MODEL 656 35' TRI-AXLE DROP DECK FLATBED TRAILER, VIN2PLC037X7BJ13171 (2006), with Model CH-37-3A, 8' x 8' Parts Container with SpareParts and Equipment, Lee Blow Out Preventer, Lubricator

SUPPOrT EQUIPmENT1 – IRVING MODEL RRCCW TRIPLEX NITROGEN PUMP, S/N 1220403001, with Funk

Model 5828RKG Power Transfer Box, Hydraulic Motor, Skid Standard Equipmentincluding, Glycol Tank, Vaporization Pot, Interconnecting Piping

1 – DAEWOO MODEL D1146TC HYDRAULIC POWER SUPPLY, S/N 506100 (2004),Diesel Engine, Rated at 185-HP @ 1,800-RPM, Hydraulic Pump, Reservoir, Hoses,Filters and Interconnecting Piping, Hours N/A

1 – DAEWOO MODEL D1146T HYDRAULIC POWER SUPPLY, S/N 405884 (2004),Diesel Engine, Rated at 185-HP at 1,800-RPM, Hydraulic Pump, Reservoir, Hoses,Filters and Interconnecting Piping, 3,014 Hours Indicated

1 – SPOKE STYLE STEEL TUBING REEL (2011), 150" OD x 94" Core x 10'4" Capable ofCarrying 5,500 m of 2" Tubing, Reel is Free Rolling, Fitted Pneumatic Brakes, TraverseMounted Spooler, 10,000 psi Circulating Iron (with 45001)

1 – LEE 5,000 PSI QUAD BLOW OFF PREVENTER

2 – REEL STANDS

1 – SPOKE STYLE SPOOLING REEL

TANDEm AXLE TrACTOr1 – NO. 82102 TANDEM-AXLE TRACTOR, VIN 1XKDD49XXYR960175

(2000), Consists of: 2000 Kenworth T800 Tandem Axle Tractor 903,035Kilometers Indicated, 28,173 Hours Indicated, Powered by Cummins ModelISX565 Turbo Charged Diesel Engine, S/N 30021514, Rated at 600-HP at1,800-RPM Unitized with Eaton Model RTLO-18918B, 18-Speed ManualTransmission, 13,200-Lbs. Single Steer Front Axle Mounted on 11R24.5Tires, (2) 23,000-Lb. Tandem Rear Axles Mounted on 11R24.5 Tires,Equipped with 36" Sleeper, CB 2-Way Radio

NITrOGEN BULkErS2 – NOs. 85101 & 85104 NITROGEN BULKER 10,887-USG TANDEM-AXLE

TANKS, VIN 1C9SC43242L810006 / S/N SN-76039 (Both 2002), Consistsof: Cryogenics Vessel Alternatives 10,887-USG Lined and Insulated Tank11,648 Kilometers Indicated, with TC Spec. 341, 90-PSI MAWP, -320 – 100°F Design Service Temperature, Shell is Constructed of SA240-304SS at6.35-mm, Head is Constructed of SA240-304SS at 6.75-mm, 89,616-Lb.Water Capacity and 69,107-Lb. Design Weight of Loading, Inner Vessel hasa 72" Dia., with RT2 Radiography and (3) Traverse Baffles, Internal &Annular Piping, with SCH 40 Penetrations, Build Pressure Coil Rated at150-GPM at 75-PSI, Vessel is Equipped with Super Cryolite / MLIInsulation, with Outer Jacket Constructed of A-607 Carbon Steel, with 304Stainless Steel Rear Mounted Instrumentation Control Cabinet, Consistingof: Pressure and Level Gauges, Relief Valves, General Valving,Interconnecting Valving / Piping & 12-V Lighting Vessel is Mounted on CVAType TRA Tri-Axle Trailer, Complete with Air Ride Suspension Fitted withAluminum Wheels Wrapped, with 11R24.5 Tires, & Air Operated Brakes,Landing Gear Consists of Brinkley Hand – Operated Jacks, Trailer is withAluminum Front and Rear Fenders, with Mud Flaps

2002

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Printed in USA • LEA3851 • IL License #444.000215 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM Industrial AVAILABLE NOW

Calgary, Alberta, CANADA

Coil Tubing and Nitrogen/FluidPumping Service Tractors, Trailers

& Support Equipment

EQUIPMENT NO LONGER

REQUIRED TO THE

ONGOING OPERATIONS OF

LEADER ENERGY

FollowUs on:

A Hilco Global Company

Vested in Your Success