auxiliary transmissions spicer - · pdf filefor severe use applications, spicer brand 4-speed...
TRANSCRIPT
Description:
Auxiliary transmissions provide maximum versatility for on/off highway applications
when teamed with a SPICER manual transmission. Transmission Technologies
Corporation (TTC) manufactures six models, including two pneumatic (air-shifted),
and four manually shifted units. Both air-shifted models feature a single selector with
a “no-repeat” shift lever design. Providing maximum flexibility, all SPICER brand
auxiliary transmissions have four speeds, with a .81 overdrive ratio. Standard PTO
mountings include: bottom-mount 6 and 8 bolt openings. A top-mount PTO model is
also available.
Typical Applications:
Auxiliary transmissions are used in a wide variety of applications including: drilling-
rigs, mining, lumber, and stationary equipment.
Performance Advantages:
For severe use applications, SPICER brand 4-speed auxiliary transmissions offer the
highest torque ratings in the industry and are backed by the TTC Support Team.
Factory trained customer service representatives are stationed across the country
and are ready to assist your spec’ing, or trouble shooting needs from 8:00 AM – 5:00
PM EST. Simply call (800) 401-9866 to locate the nearest TTC representative.
•Driver friendly ergonomics
• Flexibility / versatility
• Handles higher torque
• Improved strength to weight ratio
• Improved torque rating
• Quieter operation
• Pneumatic (air-shift) no repeat
shift pattern
• Variety of PTO mountings
• Twin counter shaft design
• FEA optimized case design
• Shot peened gears
• Wide ratio coverage
• Super low gear for off road
• Better fuel economy / top speed
• Optimize specific application
• Simple shift pattern (economical)
• Four speeds
• Creeper gear
• .81 overdrive
• Variety of ratios available
• Manually shifted
BenefitsFeatures
Auxiliary Transmissions SPICERSPICERSPICERSPICER®
Auxiliary
Transmissions
Models:
AMO1750-4C
APO1750-4C
ATO1750-4CAMO1750-4DAPO1750-4DATO1750-4D
Auxiliary Transmissions
23382 Commerce Rd.
Farmington Hills, MI 48335
Tel:+1 (248) 471-3200
Fax: +1 (248) 471-3722
TTC Website:www.ttcautomotive.comwww.ttcautomotive.comwww.ttcautomotive.comwww.ttcautomotive.com
TTC Tech Line:(800) 401(800) 401(800) 401(800) 401----98669866986698668:00 AM – 5:00 PM EST.
Bulletin # 3050-1 5/03
.81231241.24912.37ATO1750-4C
.81231241.24912.37APO1750-4C
.81231241.24281.59AMO1750-4D
.81231241.24281.59APO1750-4D
.81231241.24281.59ATO1750-4D
.81231241.24912.37AMO1750-4C
Overdrive%Direct%Under%LowModel
RATIOS
540 lbs.
26.205 inches
SAE 50wt. Synthetic 14 pts.
17,500 lbs. ft.
14,500 lbs. ft.
12,500 lbs. ft.
Weight
Length
Lubricant
Input Torque Capacity:*
<80,001lbs GCW
80,001 – 125,000 GCW
125,001 – 250,000 GCW
AMO/APO/ATO 1750-4
SPECIFICATIONS
Low
Under Direct
Overdrive
Air Shift Pattern
1 4
2 3
Low Overdrive
Under Direct
Manual Shift Pattern
Chelsea Right & Left PTOTop Mount PTOModel
See Chelsea publication (SPR-87)313254-1x through 9xATO1750-4
See Chelsea publication (SPR-87)Top Mount N/AAPO1750-4
See Chelsea publication (SPR-87)Less Top MountAMO1750-4
PTO Applications
86.77671.56662.859.6PS145-7 & D ratio Auxiliary
160140.3132121.9115.9110PSO165-10 & C ratio Auxiliary
107.394.188.681.877.873.8PSO165-10 & D ratio Auxiliary
129.1113.3106.698.493.688.8PS145-7 & C ratio Auxiliary
63.956.152.748.746.344PSO140-6A & D ratio Auxiliary
95.283.578.672.66965.5PSO140-6A & C ratio Auxiliary
5.384.724.444.103.93.7Model Combination / Axle ratios
Total Reduction Comparisons
*Call or write for application approval outside these guidelines