automatic threading machine type … threading machine documentation automatic threading machine...
TRANSCRIPT
Automatic threading machine documentation
AUTOMATIC THREADING MACHINE Type FMD860 NG3
FMD 860 NG3
Automatic wire threading machine (type H07V-U) / rigid or PER wires instandard IEC 16, 20, 25, 32 or 40 mm sheaths over a maximum lengthof 40 metres in a straight line with a hairpin return with a minimum curve radiusof 12 metres.
MAINS SPECIFICATIONS
• Max. threading length 40 m• Max. threading speed 110 m / minute• Max. coiling speed 50 m / minute• Wire / cable and PER automatic cutting (guillotine type)• Automatic sheath cutting (peripheral type)• Automatic cutting tool installation• Reception of threaded or tubed sheaths in Ø 600 mm coils• Length programming (wire or PER)• Length programming (sheath)• Designed to dialogue with the main market software
WIRE MODE
• The usable sheath cross section is 1/3 of its actual cross section• Max. wire cutter: 2 x 35 mm² • Examples of production:
- 16 mm sheath : max 3 x 1.5 mm²
- 20 mm sheath: max 5 x 1.5 mm² or 4 x 2.5 mm²
- 25 mm sheath: max. 5 x 2.5 mm²
PER MODE
• Max. PER cutter: Ø 16 mm • Examples of production:
- 16 and 32 or 40 mm sheath: not usable - 20 mm: sheath: PER Ø 12 mm (with 50 to 200 mm of PER coming out at one end)- 25 mm: sheath: PER Ø 16 mm (with 50 to 200 mm of PER coming out at one end)
• Impossible to produce: PER coming out of the sheath at both ends - Threading of PER greater than Ø 16 mm
CADENCES:
• 900 to 1000 metres of threaded or tubed sheath per hour (not including supply of wires / cables / PER and sheaths)
ACCESSORIES (OPTION)
• Thread supply from self-braking rollers for 500 m bobbins (type DF 8/12/16 stations)• Sheath or PER supply from self-braking or motorised unwinder (type MDG 1500)
WARRANTY: 1 year
APPLICABLE TECHNICAL REGULATIONS:
• European Directive 2006/42/EC of 17th May 2006.
• NF EN ISO 13849-1: Safety of machinery - Safety-related parts on control systems Part 1: General design principle
• NF EN ISO 13857: Safety of Machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs
Machine made in France
CE compliance
Machine checked and validated: Apave
Use of the SISTEMA software to build maximum safety into this machine
IMPORTANT REMINDER
If the compliance of a new machine is the responsibility of the manufacturer, Tel: 03 27 39 46 55
its commissioning and alterations are the responsibility of the users. Fax: 03 27 67 01 66
Automatic threading machine documentation
E-mail: [email protected]
Automatic threading machine documentation