automatic dosing systems salt electrolysis ... - midas-gmbh.de · 26 02 dosing systems & salt...

23

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

23

AUTOMATIC DOSING SYSTEMS & SALT ELECTROLYSISCrystal-clear, clean and hygienic pool water for pure enjoyment of swimming in your pool: high demands are placed on water treatment in the pool, for which a large number of automated solutions are available.The disinfection of liquid chlorine can be made via the ORP (oxidation-reduction potential) or the free chlorine measurement.With salt electrolysis/hydrolysis, a skin-friendly and environmentally-friendly alternative is available. By ozone/UV-C, an additional sterilization is possible. You have the choice.

OVERVIEW

24 MIDA.Go Measuring, Control and Dosing Unit

26 MIDA.Control Pro & MIDA.Control Dosing Systems

30 MIDA.Station Dosing System

32 MIDA.Hydro, MIDA.Oxi, MIDA.UV, and MIDA.HD Salt Electrolysis

40 Equipment and Expansions-Moduls, Pool Salt

44 Dosing System pH, pH Controller, Equipment pH Controller,

Water Level Controller

45 Level Regulator, 3-Electrode Set, 3-Sensor System

46 Ozone- / UV-C Disinfection Systems

24

02 DOSING SYSTEMS & SALT ELECTROLYSIS

MIDA.Go

MEASURING, CONTROL AND DOSING UNIT FOR PRIVATE POOLS PH-VALUE and FREE CHLORINE in mg/l

Article Code kgMIDA.Go 1081

Measuring range: • pH 0 – 14, free chlorine 0 – 2,0 ppm

(0 – 10 ppm on request)• display of pool water temperature

Control characteristics:• pH + oder pH - (PID), chlorine (PID)

Safety components:• start-up time delay: 0 – 15 minutes• adjustable dosage time limitation:

0 – 240 minutes• shutdown of the dosing pumps when

chemical tanks are empty

Use:• intuition-based prompt menu with

LC-display, 6 buttons, simple and user-friendly, LED Display of the operating state

Calibration:• 2-point calibration for pH and electrode

slope adjustment for chlorine

Dosing pumps:• adjustable peristaltic dosing pumps

3/6/9/12 l/h, practically silent and resistant because of spring-supported rollers

Scope of delivery:• measuring, control and dosing unit

MIDA.Go pH/free chlorine• temperature sensor• pH-sensor with cable and plug SN6• buffer solutions pH 4 and pH 7• free chlorine measuring membrane-

covered, amperometric sensor with cable, electrolyte and assembly set

• through-flow cell made from acrylic with hose connection nipples, 10 m test water tube and 2 closing valves

• peristaltic dosing pumps 3/6/9/12 l/h, 2 bar max., for pH and disinfectant, injection valve (VITON) and dosage tube PTFE

• flow control for test water• prefilter• sampling point for test water• 2 safety cans for chemical tanks

25 l/30 l• 2 suction lances with level sensor

(empty chemical tank)

Microprocessor-controlled 2-channel measuring, dosing and control unit to control the pH value and the concentration of free chlorine. All components are included in the housing (except suction lances). Protection class IP65.

Made in Germany

For private poolsmax. pool size indoor pool: 7200 m3 / pump circulation according to DIN 19643: 900 m3/hmax. pool size outdoor pool: 1440 m3 / pump circulation according to DIN 19643: 180 m3/h

2 years manu facturer‘s warranty

pH sensor 6 months (except glass breakage)

25

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

26


SPECIAL POOL MANAGEMENT PH-VALUE and FREE CHLORINE in mg/l

The MIDA.Control Pro measuring- and control unit is a ready to plug in 2-channel system. It will be used for water treatment in private high-class swimming pools. With the possibility to directly connect different sensors to measure the water parameters ( standard: pH/free chlorine), MIDA.Control Pro can fulfill the needs for optimal water treatment. The pumps and the through-flow cells are mounted directly on the plate. Protection class IP 65.

MIDA.Control Pro

1 year manufacturer‘s warranty

Made in Germany

27

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

Article Dimensions (WxHxD) Code kgMIDA.Control Pro 595 x 745 x 150 mm 1070 18

Article Code kg

Spare controller pH 1070-E8

Spare controller chlorine 1070-E9

pH glass sensor PHES 112 SE 1070-E1 0,14

Chlorine glass sensor CLB 2 (open) 1070-E2 0,35

Buffer solution pH 4, red, 50 ml 1070-E3 0,34

Buffer solution pH 7, green, 50 ml 102030-E1 0,36

Buffer solution neutral, clear 50 ml 102030-E4

3-molar KCl solution for storage, clear 50 ml 102030-E17

Stainless steel sieve for measuring water filters 1070-E4 0,01

Suction lance with cord 2 ph. 3 m, incl. 2 m suction hose 6/4 mm 1070-E5 0,24

DF2a peristaltic dosing pump 2,4 l/h (without housing), unmounted 1070-E6 0,60

DF2a peristaltic hose, 4,8 x 8 mm, lenght 11/15,5 cm (including screw connection) 1070-E7 0,09

Injection valve ½ x ¼” / 10 x 4 mm 1070-E10

Dosing hose PVC fabric reinforced 10 x 4 mm, 5 m length 1070-E11

SPARE PARTS

Measuring- and control unit with two separate dosing pumps, MEASURED VARIABLES ARE PH-AND FREE CHLORINE. The following accessories are included:• 1 pH sensor PHES• 1 chlorine sensor CLB 2 (open)• 2 DF2a perestaltic dosing pumps 2,4 l/h• 2 suction lances• 2 PVC dispensing tubes 10 x 4 mm, fabric reinforced, length 5 m• 1 flow sensor module with stainless steel measuring water filter and flow sensor• 2 injection valves ½”/10 x 4 mm• 2 shutt-off valves on filter ½” / 8 x 5 mm• 1 PE water pipe measuring 8 x 5 mm, length 10 m

FEATURES• complete dosing-system, ready to plug in• easy to install• exact dosing for perfect water condition• compact design• simple, menu-driven operation (english)• two controller for pH and chlorine• safety component: star-up time delay 0 – 9999 seconds

Note: The chlorine probe is flow-dependent: When the flow is changed (e.g. variable speed filter pump), an additional measurement water pump (e.g. Aqua Plus 4 on page 100) must be installed or the measurement water in the free outlet must be routed through the measurement water block.


NEW

28


SMART POOL MANAGEMENT PH-VALUE and ORP in mV

MIDA.Control

The MIDA.control measuring- and control unit is a ready to plug 2-channel-system. It will be used for water treatment in private swimming pools. The controller measures the pH-value and the ORP and controls – in dependence of the desired values compared with the measured values – the dosing pump for pH and the dosing pump for disinfection. The pumps are mounted on the housing. Protection class IP 65.

Backlit display for measured value display and parameterization/configuration

Clear text menu in 5 different languages: English, German, French, Spanish, Italian

Pumps are mounted space-saving on the housing

Two power control outputs for dosing pump by pulse width modulation

RC snubber for protec-tion the power relay in the circuit of inductive loads, for example, motorized dosing pumps

1FEATURES

2

3

4

5

1

2

4

3

5


Made in Germany

29

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

Article Dimensions (WxHxD) Code kgMIDA.Control 595 x 745 x 160 mm 1080 14

Article Code kg

Replacement controller complete incl. peristatltic dosing pumps 1080-E2

pH glass sensor PHES 112 SE 1070-E1 0,14

ORP glass sensor RHES-Pt-SE 1080-E1 0,14

Buffer solution pH 4, red, 50 ml 1070-E3 0,34

Buffer solution pH 7, green, 50 ml 102030-E1 0,36

Buffer solution ORP 465 mV, clear, 50 ml 102030-E3 0,36

Buffer solution neutral, clear, 50 ml 102030-E4

3-molar KCl solution for storage, clear, 50 ml 102030-E17

Stainless steel sieve for measuring water filters 1070-E4 0,01

Suction lance with level switch incl. 2 m suction line 6 x 4 mm 1080-E3

DF2a peristaltic pump 2,4 l/h (without housing), unmounted 1070-E6 0,60

DF2a peristaltic hose, 4,8 x 8 mm, lenght 11/15,5 cm (including screw connection) 1070-E7 0,09

Injection valve ½ x ¼” / 10 x 4 mm 1070-E10

Dosing hose PVC fabric reinforced 10 x 4 mm, 5 m length 1070-E11

SPARE PARTS

Measuring- and control unit with two separate dosing pumps, MEASURED VARIABLES ARE PH-VALUE AND ORP (oxidation-reduction potential).

The following accessories are included:• 1 pH sensor PHES• 1 ORP sensor RHES• 2 DF2a peristatltic dosing pumps 2,4 l/h• 2 suction lances with level control• 2 PVC dispensing tubes 10 x 4 mm, fabric reinforced, length 5 m• 1 flow sensor module with stainless steel measuring water filter and flow sensor• 2 injection valves ½”/10 x 4 mm• 2 shutt-off valves on filter ½” / 8 x 5 mm• 1 PE water pipe measuring 8 x 5 mm, length 10 m

FEATURES• measuring range pH: 2 – 12• measuring range ORP: 100 – 1000 mV• safety component: star-up time delay 1 – 999 minutes


NEW

30


MIDA.Station 1 year manu facturer‘s warranty

except sensors: 6 months warranty

Optionally available with new connection sets pH Pro and ORP Pro incl. swiss quality glass sensor and separate measuring water container, see page 40.

NEW

Article Code kgMIDA.Station 102030 7,2

MIDA.Station is a water treatment system AND a controller for swimming pools. It controls the filtration periods, pool lighting, temperature (option: temperature module on page 42) and up to 3 additional relays (e.g. pool cover, heat pump). MIDA.Station can be upgraded by adding the measurement and control of up to 4 water parameters (pH, ORP, free chlorine, conductivity). The management of the additional parameters can also be upgraded after sales via “upgrade kits”. Protection class IP 54. Controls all components, e.g.: • circulating pump • lights • backwash valve • jet-swim • heat pump • pool coverComponents: • 1 pH-module (pH sensor and installation part)• 1 ORP module (ORP sensor and installation part)• 4 x buffer solution: neutr., pH 7, pH 10, 468 mV ORP• 2 peristaltic dosing pumps 1,5 l/h• electronic control for filter, light, temperature (option)• 4 additional analog outputs, 2 digital inputs• including pre-installation for remote control and MODBUS• standard: PVC sensors (optional glass)Warranty sensors: 6 months

Optional equipment and expansion modules see page 40

Description MIDA.StationDisplay 2,8’’ TFT mobile (20m) color display

(9 languages: D, GB, F, CZ, E, P, I, TR, NL)Power supply 230 V 50/60 HzOutlet noMaximum consumption 40 WDimensions 270 x 220 x 115 mmElectronic box Fireproof plastic ABS blackFront cover Plastic ABS orangeElectronic Microprocessor 32 bitVentilation -Working hours recording Yes - accessible by clientAlarms pH dosing / pH max. dosing time / memory errorCommunication MODBUS / WIFI230 V output control (3 outputs)

Acid pump / Relay AUX 1 / Relay AUX 2

Potential-free output control (4 outputs)

Filtration / Lighting / Heating (AUX 4) / Relay AUX 3

Inlets 2 analogue and configurable inlet signals

A Filtration pump timer (not necessary)B FilterC Circulation pump1 Electronic box4 pH sensor (optional - for models with pH control)5 ORP sensor (optional - for models with ORP control)6 Conductivity probe (optional - for models with

conductivity control)8 Peristaltic dosing pump (optional - for models

with pH control)9 Injection valve (optional - for models with

pH control)10 Hydrochloric acid tank (optional, for models with

pH control, not supplied with unit)15 Other pool equipment16 Module RF or RF/WIFI or WIFI17 Free chlorine control

Installation

31

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

SALT ELECTROLYSIS - INSPIRATION OF SEA

BENEFITS fully automatic water treatment

skin-friendly swimming pool water

no use of chemicals necessary

work with each salinity

minimal control of water values

low operating costs

no chlorine smell

easy to use

The salt electrolysis is a natural disinfectant method that is based on the sea ecosystem. However, with a much lower salt content. The water treatment with the salt electrolysis process is an environmentally and skin-friendly alternative to conventional chlorine methods.

Sodium hypochlorite, a strong disinfectant which occurs during the electrolysis, destroys all microorganisms and ensures a sufficient amount of free chlorine in the pool. The active chlorine is constantly renewed by the salt electrolysis.

FUNCTIONALITY

The installation of the salt electrolysis is possible for new and existing pools of any size. Factors such as pool size, number of bathers and climatic conditions determine the required system.

INSTALLATION

Pure salt electrolysis

pH control UV-C

ORP control (mV) hydrolysis and ionisation

free chlorine control (ppm)

Conductivity/Salinity

MODEL VARIATIONS

HYDROLYSISThe hydrolysis (splitting of salt in oxygen and hydrogen) generates highly effective oxygen compounds with a perfect disinfection effect. To ensure a sanitary water condition even when the filter pump is not running, the salt electrolysis produces a small amount of chlorine. This combination requires a minimum quantity of chlorine because of a very low salt content (1,5 g/l) compared to normal salt electrolysis (3-5 g/l).

We don’t recommend salt electrolysis in combination with stainless steel AISI 316 because of corrosion. You can avoid corrosion by installing of a sacrificial anode, grounding of all mounting parts and the chloride content is max. 600 mg/l. Possible appearance of rust on surface should be cleaned and polished once time a year. No warranty is given at all. We don’t recommend salt electrolysis in combination with stainless steel AISI 304 at all.

32


MIDA.Hydro for public pools

MIDA.Hydro for private pools

MIDA.HydroMIDA.Hydro is a water treatment system AND a controller for swimming pools.Water treatment: The salt water electrolysis produces chlorine from a base of salt water of low salinity. The electrolysis cell attains a production of sodium hypochlorite (liquid chlorine) from 3g salt per liter. The chlorine combats and eliminates bacteria, virus, pathogenic agents and oxidizes organic matter present in the water. The used sodium hypochlorite reconverts into salt after a few hours. The system centrally controls all the components of your pool, ensuring an efficient interaction.Controls all components, e.g.:• circulating pump • lights• backwash valve • jet-swim• heat pump • pool coverThe pH-value and ORP control options make the MIDA.Hydro to a fully automatic measuring and control unit. Options are upgradable. MIDA.Hydro pH and MIDA.Hydro pH/ORP: incl. peristaltic dosing pump 1,5 l/h.Standard: PVC sensors (optional glass)Lifetime of titanium cell: 5000 h (warranty) max. working pressure: 7 bar


A Filtration pump timer (not necessary)B FilterC Circulation pump1 Electronic box3 Electrolysis cell (always in vertical position)4 pH sensor (optional - for models with pH control)5 ORP sensor (optional - for models with ORP control)8 Peristaltic dosing pump (optional - for models


pH control)10 Hydrochloric acid tank (optional, for models with

pH control, not supplied with unit)15 Other pool equipment16 Module RF or RF/WIFI or WIFI17 Free chlorine control

Installation


NEW

1 year manu facturer‘s warranty


33

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

* for larger pools on request

Article Code kgHydro 1 100000 8,0Hydro 1 pH 100020 9,5Hydro 1 pH/ORP100030 9,6






PRIVATE POOLS: maximum pool capacity up to 65 m³

PUBLIC POOLS: maximum pool capacity up to 65 m³





* at least 8 hours filter runtime (with several users per day or less filter running time, the required chlorine production should be coordinated together).

Description MIDA.Hydro 1 MIDA.Hydro 2 MIDA.Hydro 3 MIDA.Hydro 4 MIDA.Hydro 5 MIDA.Hydro 6

Use Private pools Public poolsIntensity 0–16 gr/h 0–22 gr/h 0–33 gr/h 0–50 gr/h 0–85 gr/h 0–100 gr/hSalt concentration 3.0 g per liter 3.0 g per literProduction chlorine with 3 g salt 16 g/h 22 g/h 33 g/h 50 g/h 85 g/h 125 g/hm³ pool (up to 28°C)* 65 m³ 110 m³ 200 m³ 65 m³ 120 m³ 250 m³m³ pool (from 28°C)* 40 m³ 80 m³ 125 m³ – – –Display 2.8“ TFT mobile (20 m) color display (9 languages: D, GB, F, CZ, E, P, I, TR, NL)Power supply 230 V / 1 ph / 50/60 Hz 230 V / 1 ph / 50/60 HzOutlet 8–15 A 8–20 A 10–15 A 10–50 A 8–85 A 8–125 AMaximum consumption 120 W 160 W 150 W 400 W 680 W 1000 WDimensions 270 x 220 x 115 mm 300 x 550 x 250 mmElectronic box Fireproof plastic ABS, black Black anodized aluminiumFront cover Plastic ABS, yellow Plastic ABS, blackProtection class IP 54 IP 54 – optional IP 65 (on request)Electronic Microprocessor 32 bit Microprocessor 32 bitIntensity control Ampere + Volt Ampere + VoltVentilation Natural convection ForcedAutomatic cleaning Programmable from 1 to 24 hours Programmable from 1 to 24 hoursFlow switch Gas sensor Flow sensorTime counter Yes - accessible by client Yes - accessible by clientControl production of disinfection g/l g/lAlarms Insufficient salt / no flow / pH metering / pH max. metering time / communication errorTest salinity – Detects g / l of salt (accuracy of ± 10%)Production control by pool cover Programmable 0-100% production of disinfection depending on pool cover open or closedProduction control by external signal – Configurable output level 0-100% depending

on any external signal (second analog input)Communication MODBUS / WIFI MODBUS / WIFI230 V output control (3 outputs) Acid pump / relay AUX 1 / relay AUX 2 Filtration control / lighting control /

heating controlPotential-free output control (4 outputs) Filtration / lighting / heating (AUX 4) /

relay AUX 34 additional relay outputs configurable

by the userNumber of bags of salt (à 25 kg) 8 14 24 8 15 10

34


MIDA.Oxi for public pools

MIDA.Oxi for private pools

MIDA.OxiMIDA.Oxi is a water treatment system AND a controller for swimming pools. This water treatment combines electrolysis of low salinity with hydrolysis. With the electrolysis of low salinity we produce liquid chlorine from water which is very slightly salted (from 1.5 g of salt per liter). The hydrolysis produces disinfectants such as oxygen, peroxide, hydroxyls and ozone. All these oxidants attac and eliminate organic matter and pathogen in water. The used chlorine reconverts into salt, and the oxidants of the hydrolysis reconvert into water on its way back to the pool. The system controls centrally all the components of your pool, ensuring an efficient interaction.Controls all components, e.g.:• circulating pump • lights • backwash valve • jet-swim • heat pump • pool cover

The pH-value and ORP control options make the MIDA.Oxi to a fully automatic measuring and control unit. Options are upgradable.

MIDA.Oxi pH and MIDA.Oxi pH/ORP: incl. peristaltic dosing pump 1,5 l/h.

Including integrated proportional control pH (from version 3.46)Standard: PVC sensors (optional glass)Lifetime of titanium cell: 5000 h (warranty) max. working pressure: 7 bar


A Filtration pump timer (not necessary)B Silex / glass / diatom filterC Circulation pump1 Electronic box3 Low salinity electrolysis cell (always in vertical

position)4 pH sensor (optional - for models with pH control)5 ORP sensor (optional - for models with ORP control)6 Conductivity sensor (optional - for models with


with pH control)9 Injection valve (optional - for models with pH

control) 10 Hydrochloric acid tank (optional, for models with

pH control, not supplied with unit)15 Other pool equipment 16 Module RF or RF/WIFI or WIFI

Installation


NEW



35

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

Article Code kgOxi 1 110000 8,0Oxi 1 pH 112000 9,5Oxi 1 pH/ORP 112030 9,6


Article Code kgOxi 7 141000Oxi 7 pH 141020Oxi 7 pH/ORP 141030
















Oxi 8 = 2 x Oxi 6 Oxi 9 = 2 x Oxi 7

Description MIDA.Oxi 1 MIDA.Oxi 2 MIDA.Oxi 3 MIDA.Oxi 4 MIDA.Oxi 5 MIDA.Oxi 6 MIDA.Oxi 7 MIDA.Oxi 8 MIDA.Oxi 9Use Private pools Public pools

Intensity 0-100 % 0-100 %

Salt concentration 1.5 g per liter 1.5 g per liter

Production chlorine with 1.5 g salt 14 g/h 20 g/h 30 g/h 51 g/h 75 g/h 105 g/h 150 g/h 210 g/h 300 g/h

m³ pool (up to 28°C)* 60 m³ 120 m³ 40 m³ 65 m³ 120 m³ 250 m³ 350 m³ 500 m³ 750 m³

m³ pool (from 28°C)* 40 m³ 80 m³ – – – – – – –

Display 2.8“ TFT mobile (20 m) color display (9 languages: D, GB, F, CZ, E, P, I, TR, NL)

Power supply 230 V / 1 ph / 50/60 Hz 230 V / 1 ph / 50/60 HzOutlet 8-13 A 8-25 A 8–35 A 8–65 A 8–95 A 10–65 A 10–95 A 2 (10–65 A) 2 (10–95 A)

Maximum consumption 120 W 200 W 400 W 680 W 1000 W 1020 W 1500 W 1500 W 1500 W

Dimensions 270 x 220 x 115 mm 300 x 550 x 250 mm

Electronic box Fireproof plastic ABS, black Black anodized aluminum

Front cover ABS plastic, green ABS plastic, black

Protection class IP 54 IP 54 – optional IP 65 (on request)

Electronic Microprocessor 32 bit Microprocessor 32 bit

Intensity control Ampere + Volt Ampere + Volt

Ventilation Natural convection Forced

Automatic cleaning Programmable 1 to 24 hours Programmable 1 to 24 hours

Flow switch Gas sensor Flow sensor

Time counter Yes - accessible by client Yes - accessible by client

Control production of disinfection from 0 to 100% from 0 to 100%

Alarms Insufficient salt / no flow / pH metering / pH extremely high or low / pH max. metering time / communication error

Test salinity – Low conductivity indicator (± 10% accuracy)

Production control by pool cover Programmable 0-100% production of disinfection depending on pool cover open or closed

Production control by external signal – Configurable output level 0-100% depending on any external signal (second analog input)

Communication MODBUS / WIFI MODBUS / WIFI

230 V output control (3 outputs) Acid pump / relay AUX 1 / relay AUX 2

Filtration control / lighting control / heating control

Potential-free output control (4 outputs) Filtration / lighting / heating (AUX 4) / relay AUX 3

4 additional relay outputs configurable by the user

Number of bags of salt (à 25 kg) 4 8 3 4 8 15 21 30 45


36


MIDA.UV is a water treatment system AND a controller for swimming pools. This water treatment is a combination of oxidizing agents such as oxygen, hydrogen peroxide, OH, ozone and chlorine. These oxidants combat and eliminate pathogenic agents and organic matter present in the water. Additionally, the UV light of the system reinforces the process of disinfection. The necessary salinity for the process (1.5 g per liter) maintains a residual chlorine level which is imperceptible for eyes and skin. The system controls centrally all the components of your pool, ensuring an efficient interaction.Controls all components, e.g.:• circulating pump • lights• backwash valve • jet-swim• heat pump • pool coverThe pH-value and ORP control options make the MIDA.UV to a fully automatic measuring and control unit. Options are upgradable. MIDA.UV pH and MIDA.UV pH/ORP: incl. peristaltic dosing pump 1,5 l/h. Standard: PVC sensors (optional glass)Lifetime of titanium cell: 5000 h (warranty) max. working pressure: 7 bar


MIDA.UV

A Filtration pump timer (not necessary)B FilterC Circulation pump1 Electronic box3 Hydrolysis cell (always in vertical position)4 pH sensor (optional - for models with pH control)5 ORP sensor (optional - for models with ORP control)8 Peristaltic dosing pump (optional - for models


pH control)10 Hydrochloric acid container (optional, for models

with pH control, not supplied with unit)15 Other pool equipment16 Module RF or RF/WIFI or WIFI18 UV-C desinfection

Installation


NEW



MIDA.UV for private pools

MIDA.UV for public pools

37

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

Article Code kgUV 1 140000 8,0UV 1 pH 142000 8,5UV 1 pH/ORP 142030 9,0

Article Code kgUV 4 173000UV 4 pH 175000UV 4 pH/ORP 175030

Article Code kgUV 7 194000

UV 7 pH 194100

UV 7 pH/ORP 194030












UV 6 = 2 x UV 4 UV 7 = 2 x UV 5

Description MIDA.UV 1 MIDA.UV 2 MIDA.UV 3 MIDA.UV 4 MIDA.UV 5 MIDA.UV 6 MIDA.UV 7Use Private pools Public poolsIntensity 0-100 % 0-100 %Salt concentration 1.5 g per liter 1.5 g per literProduction chlorine with 1.5 g saltm³ pool (up to 28°C)* 65 m³ 40 m³ 60 m³ 125 m³ 220 m³ 300 m³ 400 m³m³ pool (from 28°C)* 40 m³ – – – – – –Display 2.8“ TFT mobile (20 m) color display (9 languages: D, GB, F, CZ, E, P, I, TR, NL)Power supply 230 V / 1 ph / 50/60 Hz 230 V / 1 ph / 50/60 HzOutlet 8–13 A 8–35 A 8–65 A 10–65 A 10–95 A 2 (10–65 A) 2 (10–95 A)Maximum consumption 230 W 260 W 400 W 680 W 1000 W 1200 W 1500 WDimensions 270x220x115 mm 300 x 550 x 250 mmElectronic box Fireproof plastic

ABS, blackBlack anodized aluminium

Front cover ABS plastic, purple ABS plastic, blackProtection class IP 54 IP 54 – optional IP 65 (on request)Electronic Microprocessor

32 bitMicroprocessor 32 bit

Intensity control Ampere + Volt Ampere + VoltVentilation Natural convection ForcedAutomatic cleaning Programmable

1 to 24 hoursProgrammable 1 to 24 hours

Flow switch Gas sensor Flow sensorTime counter Yes - accessible

by clientYes - accessible by client

Control production of disinfection from 0 to 100% from 0 to 100%Alarms Insufficient salt / no flow / pH metering / pH max. metering time / communication errorTest salinity – Detects g / l of salt (accuracy of ± 10%)Production control by pool cover Programmable 0-100% production of disinfection depending on pool cover open or closedProduction control by external signal – Configurable output level 0-100% depending on any external signal

(second analog input)Communication MODBUS / WIFI MODBUS / WIFI230 V output control (3 outputs) Acid pump / relay AUX

1 / relay AUX 2Filtration control / lighting control / heating control

Potential-free output control (4 outputs)

Filtration / lighting / heating (AUX 4) / relay

AUX 3


Number of bags of salt (à 25 kg) 4 3 4 8 14 18 24


38


MIDA.HD for private pools

MIDA.HDHIDA.HD is a water treatment system AND a controller for swimming pools. This water treatment combines hydrolysis and ionization. With the hydrolysis system we produce active agents such as oxygen, hydrogen peroxide, OH, chlorine and ozone from fresh water with a slight charge of salt (around 1 g salt per liter). Like this, organic matter and pathogenic agents, present in the water, are oxidized and eliminated in the cell. As the water returns to the swimming pool the produced active agents reconvert into water and salt. The copper/silver (Cu/Ag) ionization flocculates the suspended particles, achieving exceptionally clear and transparent water as a result. In addition, the ionization reinforces the elimination of bacteria and algae. Controls centrally all the components of your pool, ensuring an efficient interaction.Controls all components, e.g.:• circulating pump • lights• backwash valve • jet-swim• heat pump • pool coverThe pH-value and ORP control options make the MIDA.HD to a fully automatic measuring and control unit. Options are upgradable.MIDA.HD pH and MIDA.HD pH/ORP: incl. peristaltic dosing pump 1,5 l/hStandard: PVC sensors (optional glass)Lifetime of titanium cell: 5000 h (warranty), max. working pressure: 7 bar


A Filtration pump timer (not necessary)B FilterC Circulation pump1 Electronic box2 Cu/Ag electrodes casing3 Hydrolysis cell (always in vertical position)4 pH sensor (optional - for models with pH control)5 ORP sensor (optional - for models with ORP control)6 Conductivity sensor (optional - for models with



pH control)10 Hydrochloric acid container (optional, for models

with pH control, not supplied with unit)15 Other pool equipment16 Module RF or RF/WIFI or WIFI

Installation

MIDA.HD for public pools


NEW



39

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

Article Code kgHD 1 150000 10,4HD 1 pH 152000 11,2HD 1 pH/ORP 152030 11,3

Article Code kgHD 4 180000 43,8HD 4 pH 182000 45,5HD 4 pH/ORP 182030 48,0

Article Code kgHD 7 210000HD 7 pH 212000HD 7 pH/ORP 212030

Article Code kg

HD 2 160000 12,0HD 2 pH 162000 14,0HD 2 pH/ORP 162030 14,5

Article Code kg

HD 5 190000 52,9HD 5 pH 192000 55,9HD 5 pH/ORP 192030 58,0

Article Code kg

HD 8 220000HD 8 pH 222000HD 8 pH/ORP 222030

Article Code kg

HD 3 170000 33,4HD 3 pH 172000 34,2HD 3 pH/ORP 172030 35,0

Article Code kg

HD 6 200000 52,9

HD 6 pH 202000 55,9HD 6 pH/ORP 202030 58,0

Article Code kg

HD 9 230000

HD 9 pH 232000HD 9 pH/ORP 232030










HD 8 = 2 x HD 6 HD 9 = 2 x HD 7

Description MIDA.HD 1 MIDA.HD 2 MIDA.HD 3 MIDA.HD 4 MIDA.HD 5 MIDA.HD 6 MIDA.HD 7 MIDA.HD 8 MIDA.HD 9Use Private pools Public pools

Intensity 0-100 % 0-100 %

Salt concentration 1.5 g per liter 1.5 g per liter

Production chlorine with 1.5 g salt 14 g/h 20 g/h 30 g/h 51 g/h 75 g/h 105 g/h 150 g/h 210 g/h 300 g/h

m³ pool (up to 28°C)* 65 m³ 100 m³ 40 m³ 125 m³ 250 m³ 350 m³ 500 m³ 700 m³ 1000 m³

m³ pool (from 28°C)* 40 m³ 80 m³ – – – – – – –

Display 2.8“ TFT mobile (20 m) color display (9 languages: D, GB, F, CZ, E, P, I, TR, NL)

Power supply 230 V / 1 ph / 50/60 Hz 230 V / 1 ph / 50/60 HzOutlet 8-15 A 8-25 A 8–35 A 8–65 A 8–95 A 10–65 A 10–95 A 2 (10–65 A) 2 (10–95 A)

Maximum consumption 80 W 120 W 400 W 680 W 1000 W 1200 W 1500 1500 1500

Dimensions 270 x 220 x 115 mm 300 x 550 x 250 mm

Electronic box Fireproof plastic ABS, black Black anodized aluminum

Front cover ABS plastic, gray ABS plastic, black

Protection class IP 54 IP 54 – optional IP 65 (on request)

Electronic Microprozessor 32 bit Microprozessor 32 bit

Intensity control Ampere + Volt Ampere + Volt

Ventilation Natural convection Forced

Automatic cleaning Programmable 1 to 24 hours Programmable 1 to 24 hours

Flow switch Gas sensor Flow sensor

Time counter Yes - accessible by client Yes - accessible by client

Control production of disinfection from 0 to 100% from 0 to 100%

Alarms Insufficient salt / no flow / pH metering / pH max. metering time / communication error

Test salinity – Low conductivity indicator (± 10% accuracy)

Production control by pool cover Programmable 0-100 % disinfection production is dependent on whether or pool cover to open

Production control by external signal – Configurable output level 0-100% depending on any external signal (second analog input)

Communication MODBUS / WIFI MODBUS / WIFI

230 V output control (3 outputs) Acid pump / relay AUX 1 / relay AUX 2

Filtration control / lighting control / heating control

Potential-free output control (4 outputs) Filtration / lighting / heating (AUX 4) / relay AUX 3


Number of bags of salt (à 25 kg) 4 6 3 8 15 21 30 42 60


40


OPTIONIAL EQUIPMENT and EXPANSION MODULES for MIDA.Station, MIDA.Hydro, MIDA.Oxi, MIDA.UV and MIDA.HD

ORP-SETMeasurement and control of the ORP. Consists of: ORP sensor with cable and plug BNC (material PVC), chip, 2 x buffer solution (1 x 20 ml neutral, 1 x 20 ml ORP 465 mV) and installation part (1 x T-piece 50 x ½“ internal thread and 1 x screw connection sensor holder ½“ external thread).

Article Code kgORP-module 000030 0,4

pH-SETIndex and management of the pH-value. Consists of: pH sensor with cable and plug BNC (material PVC), chip, 3 x buffer solutions (1 x 20 ml neutral, 1 x 20 ml pH 7, 1 x 20 ml pH 10) and installation part (1 x T-piece 50 x ½“ internal thread and 1 x screw connection sensor holder ½“ external thread).

Article Code kgpH-set 002000 0,4

ORP-SET ProMeasurement and control of the ORP. Consists of: Swiss quality ORP glass sensor with cable and plug BNC, chip, 2 x buffer solution (1 x 20 ml neutral, 1 x 20 ml ORP 465 mV), measuring water tank and installation part (2 x T- piece 50 x ½“ internal thread, 2 x ball valve ½“ external thread, 2 x hose connector ½“ external thread, 4 m measuring water hose 8 x 12 mm).

Article Code kgORP-module Pro 000040 0,4

pH-SET ProIndex and mana gement of the pH-value. Consists of: Swiss quality pH glass sensor with cable and plug BNC, chip, 3 x buffer solution (1 x 20 ml neutral, 1 x 20 ml pH 7, 1 x 20 ml pH 10), measuring water tank and installation part (2 x T-piece 50 x ½“ internal thread, 2 x ball valve ½“ external thread, 2 x hose connector ½“ external thread, 4 m measu-ring water hose 8 x 12 mm).

Article Code kgpH-set Pro 002010 0,4

NEW NEW

41

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

Article Code kgORP sensor 001030 0,2

Article Code kgpH sensor 001010 0,2

TECHNICAL DETAILS

ORP SENSORPVC plastic, 2 m cable with plug BNC

pH SENSORPVC plastic, 2 m cable with plug BNC

Article Code kgORP sensor Pro 001040 0,2

Article Code kgpH sensor Pro 001020 0,2

ORP SENSOR ProSwiss quality ORP glass sensor, 2 m cable with plug BNC

pH SENSOR ProSwiss quality pH glass sensor, 2 m cable with plug BNC

BUFFER SOLUTIONS

CONTROL OF FREE CHLORINEMeasurement and control of free chlorine (ppm)• probe type: amperometric (Au-Cu)• measuring range: 0-10 ppm• measurement accuracy: 0,10 ppm• material: Copper / Gold• probe holder: ABS 50/63 mm• additional equipment: 2 m flexible

hose / valve• cable: 2 m• plug: clamps

Article Code kgControl unit 1 000400 0,6

SALINITY TESTERMeasurement and control of conductivity value. The electronic box (MIDA.Oxi and MIDA.UV) must be activated in the factory seperately.

Article Code kgSalinity tester 000405 0,2

NEW NEW

Description pH ORPProbe Type Epoxi EpoxiMeasuring range 0-14 pH 0-1000 mVMeasurement accuracy 0,1 pH 1-3 mVMaterial Ag/CI GoldProbe holder ABS 50/63 mm ABS 50/63 mmAdditional equipment - -Cable 2 m 2 mPlug BNC BNC

Article Code kgBuffer solution pH 7, green, 50 ml 102030-E1Buffer solution pH 10, blau, 50 ml 102030-E2Buffer solution ORP 465 mV, clear, 50 ml 102030-E3Buffer solution neutral, clear, 50 ml 102030-E43-molar KCl solution for storage, clear, 50 ml 102030-E17

42


OPTIONIAL EQUIPMENT and EXPANSION MODULES for MIDA.Station, MIDA.Hydro, MIDA.Oxi, MIDA.UV and MIDA.HD

PERISTALTIC DOSING PUMP 0.6–6 l/hFor pH or flocculation, algizid. Incl. suction foot, injection valve, 2 m PE hose 4 x 6 mm, 2 m PVC hose 4 x 6 mm and manual on/off switch. Dosing capacity 10-100 % adjustable (0.6-6 l/h), 230 V AC, CE tested.

TEMPERATUR MODULETemperature sensor for current water temperature and control of the heat source. Description: temperature, sensor type: thermometer, measuring range: 0-100°C, measurement accuracy: 1°C, material: stainless steel, sensor holder: ABS 50 mm x ½“ internal thread, cable: 2 m, plug: clamps.

DISPLAY HOLDERHolder for external positioning of the color display, incl. 10 m cable and blind plug for the device.

Article Code kgDisplay holder WHFVA 0,8

Article Code kgWIFI-Modul 000005 1,1

WIFI-MODULEControl of pool parameter and pool components by smartphone, tablet and computer, incl. 10 m cable. Note: A software update and change of display is necessary with models of 2015.

Article Code kgPeristaltic dosing pump 0.6–6 l/h 000101 0,5

NEW

Article Code kgTemperature module 000500 0,2

Article Code kgFlow switch 000700

PERISTALTIC DOSING PUMP 1,5L/HFor pH or flocculation, algizid. Incl. 2 m PE hose 4 x 6 mm, 2 m PVC hose 4 x 6 mm and manual on/off switch, 230 V AC, CE tested.

Article Code kgPeristaltic dosing pump 1,5l/h 000100 0,5

FLOW SWITCHWith 2 m cable, incl. installation part 50 x ¾” internal thread

43

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

PVC – Delivery without can. 2 pcs. needed. PE – Delivery without can.

Picture cell + housing Picture cell + housing

REPLACEMENT PARTS

Article CodeColor screen / display 2.8” CTFTReplacement hose Santoprene for pH dosing pump AQUA* 102030-E5Turnstile for pH dosing pump AQUA* 102030-E6Replacement hose Santoprene for pH dosing pump Microdos** 102030-E7Turnstile for pH dosing pump Microdos** 102030-E8Injection valve 1/2“ external thread 102030-E9Dosing hose 1 piece = 1 meter 102030-E10Suction hose PVC, d 4 x 6mm, 1 piece = 1 meter 102030-E11PVC T piece, 50 x ½“ internal thread, for 1 probe 102030-E12PVC T piece, 50 x ½“ internal thread, for 2 probes 102030-E13Screw connection probe holder 1/2“ external thread for pH / ORP probes 102030-E14

REPLACEMENT TITANIUM CELLS FOR MIDA.Hydro

Code Description kg

RC16 SAL16 (Hydro1)*RC22 SAL22 (Hydro2)*RC33 SAL33 (Hydro3)*RC50 SAL50 (Hydro4)*RC85 SAL85 (Hydro5)*RC125 SAL125 (Hydro6)*RCS22 Housing for RC16, RC22

REPLACEMENT TITANIUM CELLS FOR MIDA.OXI, UV AND HD

Code Description kgRCB16 Cell 15A (Oxi1, UV1, HD1)*RCB33 Cell 30A (Oxi2, UV2, HD2)*RCB50 Cell 50A (Oxi3, UV3, HD3)*RCB85 Cell 80A (Oxi4, UV4, HD4)*RCB125 Cell 120A (Oxi5, UV5, HD5)*RCB175 Cell 175A (Oxi6, UV6, HD6)*RCB250 Cell 250A (Oxi7, UV7, HD7)*RCB350 Cell 350A – 2 cells included

(Oxi8, HD8)*RCB500 Cell 500A – 2 cells included

(Oxi9, HD9)*RCS22 Housing for RCB16, RCB33

* with 3-step switch ON / OFF, lower right ** with 2-step switch ON / OFF, bottom left and adjustment of pump output

CHEMICAL SAFETY CANAllows safe and sure storage of 20/30 kg chemical tanks, prevents for any outflow or leakage.

Material Dimensions per piece (HxWxD)

Code kg

PVC 26 x 47 x 46 cm 390 1,6PE 25,5 x 61 x 32 cm 391 4,0

102030-E6 102030-E9 102030-E11102030-E10102030-E8 102030-E12

102030-E7

GROUNDING SETwith 2 m cable, including immersion sleeve and O-ring

Article Code kgGrounding set 000550

NEW

Made in Germany

Made in Germany

* Delivery without housing * Delivery without housing

44


Article Code kg PackingPoolsalt 799 25,0 40 (per pallet)

EQUIPMENT FOR PH-CONTROL UNITConsisting of • pH sensor with 5 m cable• buffer solution pH 7.00 (65 ml) and pH 9.00 (65 ml)• 2 x saddle clamps 50 mm x ½“ internal thread• ½“ external thread sensor holder PP

PH-CONTROL UNIT Peristaltic pump in controller, simple calibration process with 6.0 pH to 8.0 pH interval, setpoint proportional dosing, suitable for acid and chemical dosage, semi-automatic calibration at pH 7.01, pH visualization on the display ON / OFF function, manual venting pump head, protection class IP 55, Standard power supply 230V, CE tested.• PP housing • Polycarbonate front panel• incl. 2 m PVC hose (4 x 6 mm) and 2 m PE hose (4 x 6 mm), injection valve ½” and

suction foot• equipment #MI-301 is necessary

Article Code kgpH-control unit 1,5 liter MI-300 1,0

Article Code kgEquipment MI-301 1,0pH sensor (already included in equipments) PH MI-301 0,2

POOLSALT Corresponding to EN 16401 and BPR 528/2012 EU. Pool salt contributes to a safer use of the swimming pool for swimming and offers high comfort. Poolsel is made on the basis of natural, coarse sea salt with an extremely high purity and low sulfate content and contains no harmful Release agent. The pool salt will be used for optimizing the salinity and for the production of chlorine by electrolysis.

Application: salt for swimming pools / salt electrolysis (not suitable for membrane electrolysis), sea salt for optimizing salinity

Features: • salt crystals – grain size: 1–2 mm • very high purity - contains no additives • good and fast soluble • suitable for all work of electrochlorinators Package contents: 25 kg, only be purchased in full pallets

45

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysisLEVEL CONTROLLER

Electronic level control with overflow protection and fault indication.

The built-in time delay prevents too short switching distances for wave motions. The 5 m long shielded sensor cable can be extended up to 50 m (price on request). Protection class IP 40. Housing dimensions: 140 x 100 x 67 mm

Article Code kgWithout magnet valve, 230 V M-061 0,6M-061 + 15 m sensor line, 230 V M-063 0,9With deflate magnet valve ½“, 230 V M-060 1,3M-060 + 15 m sensor line, 230 V M-062 1,5

LEVEL CONTROLLERElectronic level control for triple sensor system.

The controller can be supplied either with dipped electrodes or with a triple sensor system for wall fastening. The switch function may be used for pumping liquids for example and be reversed in its switching function. Protection class IP 40. The triple sensor system is not included.

Housing dimensions: 140x100x67 mmArticle Code kgWith float switch + deflate magnet valve ½“, 230 V M-035 1,1Without magnet valve, 230 V M-025 0,5

TRIPLE ELECTRODE SETThree pieces hang-electrodes with protective plastic sleeve and electrode holder. The cable is 3 m long. It is also water- and ozone resistant.

Article Code kgV2A/AISI 304 stainless steel M-014 0,4V4A/AISI 316 stainless steel M-017 0,4

TRIPLE SENSOR SYSTEMThe triple sensor system is with mounting rail, for skimmer installation. The sensors are adjustable in height.

Artikel Code kgTriple sensor system with mounting rail M-038 0,2

Made in Germany

Made in Germany

Made in Germany

Made in Germany

46


Already in 1878 it was discovered that sunlight has an antibacterial effect. Further investigation revealed that the germicidal effect does not run out from the visible light, but the invisible ultraviolet light in the wavelength range of 200-280 nanometers (nm).A popular accessory possibility of swimming pool water treatment is therefore the UV-C radiation without influencing the water quality (pH, oxygen content). The addition of water care products can thus be considerably reduced.The UV-C disinfection systems are integrated in the filter circuit of the swimming pool. The UV-C light destroys the cells and DNA from bacteria, viruses and microorganisms. This environmentally friendly and effective method often totally destroys the organism, or at the very least will impair its ability to reproduce.

CLEAN WATER WITH UV-C DISINFECTION

UV-C is effective against all

microorganisms

Crystal clear water

Reduced use of chemicals for water

treatment

Lower costs for chemicals, energy and maintenance

No overdosing risk UV-C is an environmentally

friendly technology

WHAT IS AOP?The AOP process (Advanced Oxidation Process) com-bines the advantages of ozone and UV-C in one device. The combined use of ozone and UV-C light in water generates hydroxyl radicals (OH-). These radicals are a very effective remedy for chlorine-resistant microorga-nisms (like legionella bacteria and cryptosporidium), organic pollutants and by-products of cleaning such as chloramines, which are responsible for eye and skin irritation and the typical smell of chlorine.Since UV-C light destroys the residual ozone in the water, no de-ozonization device is required. AOP is a very effective and efficient method for the disinfection and disinfection of your pool. Therefore, the amount of chlorine in the pool can be kept to a minimum.

The advantages of AOP:• Highly effective combination of ozone (oxidation)

and UV-C (disinfection)• Improves the disinfection efficiency• Enables minimal chlorine content in the pool• Effective against chlorine-resistant microorganisms• Prevents the appearance of skin and eye irritation• Can be quickly integrated into existing filter systems

47

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysisAOP COMPACT OZON & UV-C

AOP COMPACT OZON & UV-C SALTWATER

#208 – AOP Compact Ozon & UV-CHousing Stainless Steel AISI 316 L

Up to 35 % more UV-C yield as a result of reflection

AOP Compact Ozon & UV-C 75 W

AOP Compact Ozon & UV-C Saltwater 75 W

Max. pool content 70 m3 70 m3

Type 75.000/75W 75.000/75WRec. flow rate 18 m3/h 18 m3/hMax. pressure 2 Bar 2 BarMax. flow 23 m3/h 23 m3/hWater temperature 10 – 40 °C 10 – 40 °CDiameter unit Ø 70 mm 70 mmLength unit 100 cm 100 cmDiameter in-outlet Ø 63 mm / 50 mm / 1½“ 63 mm / 50 mm / 1½“Housing Stainless Steel AISI 316 L PVCElectronic ballast 230 V AC 50/60 Hz 230 V AC 50/60 HzMaximum current 0,57 A 0,57 ALamp wattage 75 W 75 WLamp T5 75 W Ozone T5 75 W OzoneLifetime of lamp 4.500 h Ozone

9.000 h UV-C4.500 h Ozone 9.000 h UV-C

Ozone production 0,6 g/h 0,6 g/hTimer yes yesReplace lamp alarm yes yesWeight 6,0 kg 6,0 kgPacking size 37 x 13 x 111 cm 37 x 13 x 111 cmCode 208 209

Article CodeReplacement lamp 75 Watt Ozone 208-E1

REPLACEMENT LAMP 75 WATT OZONE

#209 – AOP Compact Ozon & UV-C Saltwater – housing PVC for saltwater pools

This revolutionary combination of ozone and UV-C (AOP) makes a pool with a minimal amount of chlorine possible! With this AOP Compact Ozone & UV-C unit on your pool system you´re able to keep your pool water fresh, crystal clear and especially hygienic clean. This device is able to reduce the chlorine concentration up to 50 - 80 %! You connect the AOP Compact Ozone & UV-C” in to your swimming pool system. Using a pump, the water is pumped after the filter into the unit through the supplied reactor. Because of the water pressure in the reactor, air is sucked through the Venturi system. Air is sucked into the unit via the air valve and flows through the area between the quartz glass and the AOP Compact Ozone & UV-C lamp. The lamp has a double function, producing ozone and UV-C light at the same time. Because air enters the unit via the lamp, ozone is generated by the special AOP Compact Ozone & UV-C lamp, which produces 0.6 grams of ozone. After it has passed the ball valve, the ozone enriched air is then mixed with water in the system. The oxidation and sterilisation take place here, and a powerful disinfection process is achieved. When ozone is used in combination with UV-C light in water, hydroxyl radicals (OH-) are created. These radicals are very effective against chlorine immune microorganisms (like Legionella bacteria and Cryptosporidium), organic pollutants and cleaning byproducts such as chloramines, responsible for eye and skin irritation and the typical chlorine smell.

Advantages:• the combination of ozone and UV-C (AOP), integrated in this smart

designed purifier, ensures fresh and healthy pool water with the possibility of using a minimum of chlorine.

• a built-in electronic ballast to ensure a smooth power supply• 100 % effective and constant operation against chlorine-resistant microorganisms• the ozone UV-C lamp produces ozone for 4.500 hours and

produces UV-C for 9.000 hours• the device will indicate when the lamp needs replacing• easy installation and maintenance• prevents occurrence of skin and eye irritation

2 years manu-facturer‘s warranty

except lamp and quartz glass

NEW

48


Max. pool content Flow rate Max. flow in the bypass

External thread

Code kg

40 m³ 4-8 m³/h 15 m³/h 1,5“ 129 12,0

20-75 m³ 5-15 m³/h 30 m³/h 2,0“ 207 12,0

Type A B C D E F G HEasy-UV 4–8 m3/h 1000 mm 790 mm 650 mm 400 mm 240 mm 1½“ AG 90 mm 60 mmEasy-UV 5–15 m3/h 1000 mm 805 mm 650 mm 400 mm 240 mm 2“ AG 125 mm 80 mm

UV-C DISINFECTION TECHNOLOGY TYPE EASY-UV

The Easy-UV devices are bacteriologically tested. If the installation instruction is followed closely, a disinfection degree between 75% and 91% can be reached. On the second day the 94% mark will already be obtained. Easy-UV devices disinfect the water through UV-C light and destroy chloramines. Bacteria, viruses, microalgae, fungi, parasites and other microorganisms will be destroyed. The unpleasant odor and the irritation of the mucus membranes in the nose, eyes, skin, and throat caused by the chloramines is absent. The water remains fresh, clean and clear and keeps its natural taste. Healthy minerals are not lost. Easy-UV devices save chemicals. You will save up to 50 % on chemical treatments and the aging of the building materials in and around the swimming pool slows down considerably. UV-C disinfection is compatible with all other forms of water treatment. Through the filter pump the device is easily connected to the water circuit.

EASY UV (4-8 m³/h)

EASY UV (5-15 m³/h)

REPLACEMENT-UV-LAMP

Article Watt Code kgReplacement-Lamp (#129 and #207) 80 129-E1


Technical Information 4-8 m3/h 5-15 m3/hMax. pool content 40 m3 20–75 m3

Lamp 1x low pressure lamp 1x low pressure lampMax. service lifetime of lamp 9000 h 9000 hPower consumption 80 W 80 WWavelenght 253,7 nm 253,7 nmDwell time 2 - 4 Sek. 2.25- 6.7 Sek.Voltage 230 V 230 VFrequency 50 Hz 50 HzIP - Code IP 54 IP 54Ballast electronic electronicFkow rate 4 - 8 m3/h 5 - 15 m3/hBypass operation up to 15 m3/h pumps 30 m3/h pumpsMax. pressure 2,5 bar 2,5 barCasing: electropolished AISI 316 / 1.4404 AISI 316 / 1.4404Water temperature 10 - 40 °C 10 - 40 °C Time counter no yesOn/off switch no yesControl lamp yes yes

49

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

Max. pool content Watt Length (cm) Code kg45 m³ 40 100 205 4,175 m³ 75 100 206 4,390 m³ 130 100 128

Article Watt Code kgReplacement-Lamp Philips 40 205-E1 0,5Replacement-Lamp Philips 75 206-E1 0,5Replacement-Lamp Philips 130 128-E1 0,5

REPLACEMENT-UV-LAMP

#205, 206, 128



Plug-in device timer with LED display and operating hours counter• housing stainless steel AISI316 /

connection ABS• 2 x 63/50 mm slip connection,

alternatively 2 x 1½“ internal thread• 230 V

UV-C TECH DISINFECTION SYSTEMS with timer

40 Watt 75 Watt 130 Watt

Max. pool content 45 m3 75 m3 90 m3

Lamp 1x low pressure lamp PHILIPS TUV 36T5 4P-SE 40W

1x low pressure lamp PHILIPS TUV 36T5 HO 4P-SE 75W

1x low pressure lamp PHILIPS TUV 130W 48-SE Amalgam

Max. service life of lamp 9.000 h 9.000 h 16.000 h

Power consumption 40 W 75 W 130 W

Wavelenght 253,7 nm 253,7 nm 253,7 nm

Voltage 230 V AC 50/60 Hz 230 V AC 50/60 Hz 230 V AC 50/60 Hz

Current consumption 0,29 A 0,57 A 1,1 A

Material: housing stainless steel 316L stainless steel 316L stainless steel 316L

Max. pressure 2 bar 2 bar 2 bar

Water temperature 10 - 40 °C 10 - 40 °C 10 - 40 °C

Recommended flow 11 m3/h 16 m3/h 22 m3/h

Max. pool size 45 m3 65 m3 90 m3

Time counter yes yes yes

Diameter 70 mm 70 mm 70 mm

Length 1000 mm 1000 mm 1000 mm

50


Max. pool content Watt Length (cm) Code kg12 m³ (Whirlpool) 12 40,5 200 1,620 m³ 16 56 201 2,845 m³ 40 100 202 3,665 m³ 75 100 203 3,990 m³ 130 100 204

Article Watt Code kgReplacement-Lamp T5 16 201-E1 0,5Replacement-Lamp T5 40 202-E1 0,5Replacement-Lamp T5 75 203-E1 0,5Replacement-Lamp Philips 130 204-E1 0,5

REPLACEMENT-UV-LAMP

UV-C TECH DISINFECTION SYSTEMS • housing stainless steel 316 / connections PVC• 2 x 63/50 mm slip connection,


#200

#201#202, 203, 204



12 Watt 16 Watt 40 Watt 75 Watt 130 WattMax. pool content 12 m3 (Whirpool) 20 m3 45 m3 65 m3 90 m3

Lamp 1x low pressure lamp PHILIPS PLS 12W

1x low pressure lamp T5 16W 4P



1x low pressure lamp PHILIPS 130W Amalgam

Max. service life of lamp 9.000 h 9.000 h 9.000 h 9.000 h 16.000 hPower consumption 12 W 16 W 40 W 75 W 130 WWavelenght 253,7 nm 253,7 nm 253,7 nm 253,7 nm 253,7 nmVoltage 230 V AC 50/60 Hz 230 V AC 50/60 Hz 230 V AC 50/60 Hz 230 V AC 50/60 Hz 230 V AC 50/60 HzCurrent consumption 0,25 A 0,29 A 0,29 A 0,57 A 1,1 AMaterial: housing stainless steel 316L stainless steel 316L stainless steel 316L stainless steel 316L stainless steel 316LMax. pressure 2 bar 2 bar 2 bar 2 bar 2 barWater temperature 10 - 40 °C 10 - 40 °C 10 - 40 °C 10 - 40 °C 10 - 40 °CRecommended flow 3 m3/h 5 m3/h 11 m3/h 16 m3/h 22 m3/hMax. pool size 12 m3 20 m3 45 m3 65 m3 90 m3

Time counter no no no no noDiameter 70 mm 70 mm 70 mm 70 mm 70 mmLength 420 mm 560 mm 1000 mm 1000 mm 1000 mm

51

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysis

Article Watt Code kgReplacement-Lamp T5 40 202-E1 0,5Replacement-Lamp T5 75 203-E1 0,5

REPLACEMENT-UV-LAMP

Max. pool content Watt Length (cm) Code kg45 m³ 40 100 202B 3,065 m³ 75 100 203B 3,2

• housing PVC / connections PVC• UV-resistant coated• suitable for saltwater)*• 2 x 63/50 mm slip connection,


* max. salt concentration: 35 g/l

#202B, 203B



202B 203BMax. pool content 45 m3 65 m3

Lamp 1x low pressure lamp PHILIPS SMART CAP 40W

1x low pressure lamp PHILIPS SMART CAP 75W

Max. service life of lamp 9.000 h 9.000 hPower consumption 40 W 75 WWavelenght 253,7 nm 253,7 nmVoltage 230 V AC 50/60 Hz 230 V AC 50/60 HzCurrent consumption 0,42 A 0,8 AMaterial: housing PVC (UV-C stable) PVC (UV-C stable)Max. pressure 2 bar 2 barWater temperature 10 - 40 °C 10 - 40 °CRecommended flow 9 m3/h 14 m3/hMax. pool size 45 m3 65 m3

Time counter no noDiameter 70 mm 70 mmLength 1000 mm 1000 mm

52


UV-C Pro HDPEThe UV-C Pro HDPE is designed to treat highly polluted water. It is suited for all kinds of industrial water purification and can even be used for the production of ultrapure water, semiconductor-, pharmaceutical- and cosmetic industry. Other applications: swimming pools, process water treatment and aquaculture. Use in sea water: yes

NEW



1670mm

¼”

½”

DN200340mm

900mm

885mm

1280mm

450m

m

DN200

315m

m

60mm

160m

m

225mm

½”

1670mm

¼”

½”

DN150

340mm

900mm

885mm

1340mm

450m

m

DN150

315m

m

60mm

160m

m

160160mm

½”

Description UV-C Pro HPDE 975 W UV-C Pro HPDE 1950 WRecommended pool size 600 m3 1000 m3

Lamp T6 325W 4P Amalgam T6 325W 4P AmalgamMax. service life of lamp 16.000 h 16.000 hUV-C lamp power 3x 325 Watt 6 x 325 WattWavelenght 254 nm 254 nmVoltage 230 V AC 50/60 Hz 230 V AC 50/60 HzCurrent consumption 5.4 A 10.7 AMaterial housing HDPE HDPEProtection class IP54 IP54Max. pressure 6 bar (87 psi) 6 bar (87 psi)Water temperature 0 - 55 °C 0 - 55 °CHour meter yes yesReactor diameter Ø 315 mm Ø 315 mmReactor length 1670 mm 1670 mmReactor shape U UConnection mm 160 mm flange 225 mm flangeConnection DN DN150 flange DN200 flangeRecommended flow at 30 mJ/cm² (98 % transmission) n/a n/aRecommended flow at 40 mJ/cm² (98 % transmission) n/a n/aRecommended flow at 60 mJ/cm² (98 % transmission) 115 m3/h 218 m3/hMax. flow 150 m3/h 250 m3/hWeight 165 kg 165 kgCode 130 131

UV-C Pro HPDE 975 W UV-C Pro HPDE 1950 W

53

02

02 D

osin

g Sy

stem

s

& S

alt

Elec

trol

ysisUV-C Pro stainless steel

Multi-lamp unit (2 x 200 W or 3 x 200 W) for commercial applications in professional industry. Safe and continuous water disinfection without use of chemicals. Suitable for providing safe water without harmful micro-organisms in all sectors where perfect disinfection is needed. In combination with Basic or Control Monitor Plus. UV-C sensor optional. Easy installing and maintenance. Lamp replacement without tools. Use in sea water: no

afstand gaten (10mm)

550mm

840mm½”900mm

370m

m

204m

m

DN100

½”

850mm

50mm

220mm

1100mm1100mm

840mm

½”

½”

DN125250 mm

900mm

550mm

50mm

0mm)

850mm

380m

m

219

mm

900mm



* Maximum flow 50 m3/h (50 m3/h = 39 mJ/cm3) * Maximum flow 77 m3/h (77 m3/h = 40 mJ/cm3)

NEW

UV-C Pro Inox 400 W UV-C Pro Inox 600 W

Description UV-C Pro stainless steel 400 W UV-C Pro stainless steel 600 WRecommended pool size 200 m3 300 m3

Lamp T6 200W 1115 SPT T6 200W 1115 SPTMax. service life of lamp 16.000 h 16.000 hUV-C lamp power 2 x 200 Watt 3 x 200 WattWavelenght 254 nm 254 nmVoltage 230 V AC 50/60 Hz 230 V AC 50/60 HzCurrent consumption 1.94 A 2.9 AMaterial housing Inox 316L Inox 316LProtection class IP54 IP54Max. pressure 6 bar (87 psi) 6 bar (87 psi)Water temperature 0 - 55 °C 0 - 55 °CHour meter only with control monitor only with control monitorReactor diameter Ø 204 mm Ø 219 mmReactor length 1100 mm 1100 mmReactor shape U UConnection mm 110 mm flange 140 mm flangeConnection DN DN100 flange DN125 flangeRecommended flow at 30 mJ/cm² (98 % transmission) 50 m³/h* 77 m³/h**Recommended flow at 40 mJ/cm² (98 % transmission) 49 m³/h 77 m³/hRecommended flow at 60 mJ/cm² (98 % transmission) 33 m³/h 52 m³/hMax. flow 50 m³/h 77 m³/hWeight 30 kg 42 kgCode 135 136

automatic dosing systems salt electrolysis ... - midas-gmbh.de · 26 02 dosing systems & salt...

Documents