CONCRETE 

MD ProSupply Co.,Ltd 23/107 Moo 7, I Design Village Lumlukka Klong 3, Ladsayoy Lumlukka Pathumthani, Thailand 12150 

T.0 2532 8122, Fax : 0 2902 0080 # 2181, website  : www.mdprosupply.co.th

Automatic Compression Machine Meet ASTM C39; AASHTO T‐22 

▶ 1500 and 2000 KN. Capacity

▶ Test 150 and 100 mm. cube or cylinder up to

320 x160 diameter

▶ Fully automatic test sequence with microprocessor

Control

▶ Automatic loading cycle

▶ On‐board memory for 9000 test result.

▶ Accuracy Class 1 (±1%) Meet Standard ASTM E4.,

DIN‐51220., EN ISO 7500‐1

▶ Automatic control of pace rate  0.5 to 30 kN/sec

▶ Selectable measuring force KN, lbs or kgf engineering

units.

▶ Rapid approach of platens.

▶ Graphic display with high resolution 240 x 64 pixel

with LCD Back light

▶ Real‐time Load and Compressive Strength

▶ Input Range  0‐20 mV,  0‐150 mV,  0‐500 mV,  0‐1 V,

0‐2.5 V,  0‐5 V

▶ SAFETYGUARDS, polycarbonate, with aluminium

frame

TECHNICAL 

• Acquisition and data processing systemat 24 bit, effective resolution 22 bit.

• USB and RS 232 interface for transferdata during test or test results directlyto PC.(Via Download software)

• RJ45 for WIFI connection interface fortransfer data directly to PC.

• The two analogue‐digital channels acceptsensor, Transducer or Load cell.

• Print test result via LPT port directly.

• On board circuit protection for maximumload or setting point.

• WIFI data transfer system supplied  completedown load Software  compression test withvisualization of the Load/Time in real time

ODERING IMFORMATION 

Model  Description 

MD815‐AT  1500 kN Auto‐Compression Machine for 220‐240 V, 50 Hz, 1 ph. 

MD820‐AT  2000 kN Auto‐Compression Machine for 220‐240 V, 50 Hz, 1 ph. 

Note : 

All model are include specimen distance Pieces diameter of 150 mm. with 20, 50, 60, 80 and 100 mm. of effective depth 

ขอ 4

ขอ 5

ขอ 6

ขอ 7

ขอ 8

ขอ 8

ขอ 9

ขอ 10

ขอ 11

ขอ 12

ขอ 12

ขอ 13

ขอ 14ขอ 15

CONCRETE 

MD ProSupply Co.,Ltd 23/107 Moo 7, I Design Village Lumlukka Klong 3, Ladsayoy Lumlukka Pathumthani, Thailand 12150 

T.0 2532 8122, Fax : 0 2902 0080 # 2181, website  : www.mdprosupply.co.th

Specification  

Machine  MD815‐AT  MD820‐AT 

Capacity  1500 kN.  2000 kN. 

Vertical Clearance  320 mm.  330 mm. 

Horizontal Clearance  250 mm.  300 mm. 

Max Ram Travel  50 mm.  50 mm. 

Upper Platen*  220 mm.  220 mm. 

Lower Platen  220 mm  220 mm 

Overall Dimension. Load Frame. (W x D x H) 

320 x 250 x 840 mm.  380 x 300 x 930 mm. 

Overall Dimension Control Console (W x D x H) 

500 x 360 x 1150 mm.  500 x 360 x 1150 mm. 

Weight of Frame  500 kg.  600 kg. 

Weight of Control Console  90 kg.  90 kg. 

* Rockwell Hardness test  55 HRC

ขอ 1ขอ 1

ขอ 2

ขอ 2

ขอ 3

ขอ 6

ขอ 17

POINT-OF-SALE PRINTERTM-T82

Unrivalled PerformanceWith a MCBF of 60 million lines and an auto-cutter life of 1.5 million cuts.

Ease-of-useFeatures drop-in paper loading, auto-cutter and status LEDs.

All-in-one Box ConvenienceIncludes all necessary drivers and accessories for quick set-up.

DELIVERING RELIABILITY AND ADAPTABILITY ANYWHERE.

An efficient business begins with Epson’s TM-T82. With Epson’s advanced printing technology, discover reliability and functionality that ensures an easy printing solution for all users. Designed with an adaptable mounting capability, the TM-T82 allows for versatile placement even in the smallest environment. Make the TM-T82 the perfect companion for your business today.

Print Auto Cutter

CostEffective

CompactWall Mount

ขอ 18

Information correct as at March 2014

SPECIFICATIONS TM-T82

MODEL NUMBER TM-T82

Printing Method Thermal line printing

Print Font

Font 9 × 17 / 12 × 24, Hanji Font: 24 x 24, Thai Font: 9 x 24 / 12 x 24

Character Size (W x H) 0.88 × 2.13 mm / 1.25 × 3 mm, Hanji font: 3 x 3 mm, Thai font: 0.88 x 3 mm / 1.25 x 3 mm

Character Set 95 Alphanumeric, 18 set International, 128 × 43 pages (including user-defined page)

Hanzi: Simplified Chinese: GB18030-2000: 28,553

Bar code: UPC-A, UPC-E, JAN13(EAN13), JAN8(EAN), CODE39, ITF, CODABAR(NW-7), CODE93, CODE128,

GS1-128, GS1 DataBar

Two-dimensional code: PDF417, QRCode, MaxiCode, 2D GS1 DataBar, Composite Symbology

Characters Per Inch 22.6cpi / 16.9cpi, Hanji Font: 7.8cpi, Thai Font: 22.6cpi / 16.9cpi

Interface Built-in USB + UIB (Serial or Parallel interface), Ethernet interface

Receive Data Buffer 4KB or 45 bytes

Print Speed Max 150mm/s

Dot Density 203 x 203 dpi

Paper

Roll Paper Width and Roll Diameter 79.5 ± 0.5 (W) × dia. 83.0

57.5 ± 0.5 (W) × dia. 83.0

Power

Supply Voltage DC +24V ± 7%

Power Consumption

Operating Approx. 1.5A (Mean / Print ratio 18% with print pattern)

Standby Approx. 0.1A (Mean)

Power Supply External power supply (Model: PS-180)

Reliability

Printer Mechanism Life 15 million lines

Auto Cutter Life 1.5 million cuts

MTBF 360,000 hours

MCBF 60,000,000 lines

Overall Dimensions (D x W x H) 140 × 199 × 146 mm

Mass Approx. 1.7kg

EMI and Safety Standards Oceania EMI AS/NZS CSPR22 Class A

Option External buzzer unit

Standard Accessories ROM Roll paper × 1 roll (for checking the initial movement of the printer),

CD-ROM (Drivers, Utility Software, Manuals),

Setup guide, Power button cover, Waterproof power button cover,

Wall hanging bracket, Screws for wall hanging bracket,

Rubber feet for vertical installation, Control panel sheet for vertical installation,

58-mm width paper guide, External power supply (Model: PS-180)

Installation Horizontally / vertically / vertically with wall hanging bracket / wall hanging

Legend

dpi dots per 25.4 mm (dots per inch)

cpi characters per 25.4 mm

(characters per inch)

Weight: Approx. 1.7 kg (3.74lbs)

Dimensions & Weight

146mm(5.74”)

199mm(7.83”)

140mm(5.51”)

©2014 Epson Singapore Pte Ltd. All Rights Reserved. Reproduction in part or in whole, without the written permission from Epson, is strictly prohibited.

EPSON and EXCEED YOUR VISION are registered trademarks of Seiko Epson Corporation.

All other product names and other company names used herein are for identification purposes only and are the trademarks or registered trademarks of their respective owners.

Epson disclaims any and all rights in those marks. Print samples shown herein are simulations. The actual product design and contents may vary. Specifications are subject to change without notice and may vary between countries. Please check with local Epson offices for more information.

ขอ 18

201312WEB

RELATED PRODUCTS Channel Unit FSW-10 Combination with the exclusive switching box makes maximum 50 channels automatic and interval measu­rement possible.

Remote Power Controller RPC-OSA In combination with RPC-05A and an external battery, long-term measurement with TDS-150 using sleeping function becomes possible.

External Display Unit EDU-11

The monitor value of TDS-150 can be displayed at a remote place. Features high visibility with high­brightneess LED.

Data cable CR-3830 BNC output cable CR-31 belonging to EDU-11

1-Gauge 4-Wire method Strain Gauges

modular plug attached

/

/ L_ ________ /------------------------------~

~ UKAS

External Printer DPU-H245AS-A03A The measurement data ofTDS-150 is printed out..

Printer cable CR-5370 optional Dsub9P-10P(mini) thru 0.5m Exclusive cable

RS-232C cable CR-5360 Dsub9P-9P Cross Exclusive cable for connection with personal computer

USB cable CR-6187 Mini B-A with ferrite core 1.5m Exclusive cable for connection with personal computer

AC adaptor CR-1861 Compact FlashTM card

Capacity : 32MB-2GB

TEDS compatible sensor To use TEDS functioin of the TDS-150, TEDS compatible sensor is required to recog­nize its own parameters such as measuring capacity, rated output, etc. registered in the built-in IC chip.

TEDS compatible load cell TCLZ with the built-in IC chip

-~-----~ ' OIJFfAW I

t ' ' 2 IKf- R GB I

I c_.ewa ,

Specifications subject to change without prior notice

MANAGEMENT SYSTEMS

001 Tokyo Sokki Kenkyuio Co., Ltd.

Approval Certificate 1809001 Design and manufacture of strain gauges, strain measuring equipment and transducers

www.tml.jp/e 8-2, Minami-Ohi 6-Chome, Shinagawa-Ku, TOKYO 140-8560, JAPAN TEL: TOKYO 03-3763-5611 FAX: TOKYO 03-3763-5713 e -mail address:sales@tml.jp

ขอ 19