WORLD FAMOUS MANUFACTURER OF COMMERCIAL & RESIDENTIAL FURNITUREFEATURING: WIDE SELECTION OF STAMPING MACHINERY, HIGH-VOLUME TUBE EQUIPMENT, WOODWORKING MACHINERY, TOOLROOM EQUIPMENT, PLANT SUPPORT ITEMS PLUS: HUGE INVENTORY OF FINISHED RESIDENTIAL & COMMERCIAL FURNITURE, RAW MATERIALS & WORK IN PROCESS

HUGE 2-DAY AUCTION ATCHROMCRAFT REVINGTON

#1 Quality Lane, SENATOBIA, (Memphis Area) MS 38668(See Directions on Back Page)

AUCTION:THURS. & FRI.JUNE 18 & 19

9:00 A.M.

INSPECTION Wed, June 17

9:00 A.M. to 4:00 P.M. & Morning

of Sale

BUYER’S PREMIUM: 15% ONSITE • 18% WEBCAST

Read Partial Terms and Conditions on Back Page

of Brochure

YODER MDL. M-2/1/2 TUBE MILL SYSTEM EAGLE EATON LEONARD CNC TUBE BENDER

AUCTION

>VIEW OF

AIDA 121 T. GAP FRAME

PRESSES

<SHODA PLATINUM ALPHA CNC ROUTER

>CHROMCRAFT

ERGONOMIC OFFICE CHAIR

On-Site Bidding in Senatobia, (Memphis Area) MSor Bid Via Webcast at

CNC

CNC

V/S

HUGEFURNITURE INVENTORY

SEE PAGE 8

FAX: (713) 672-7905

1304 Langham Creek Drive, Suite 454, Houston, Texas 77084

E-MAIL: pmi@pmi-auction.com • WEBSITE: www.pmi-auction.comRon Moore, MS LIC. #425 • PMI MS LIC. #417F

HOUSTON • DALLAS • ST. LOUIS

PHONE: (713) 691-4401

In Conjunction With:4131 S. State Street Chicago, IL 60609Phone: 773-548-4131Fax: 773-548-2608LOEBWINTERNITZ.COMCharles Winternitz, MS Auction Lic. #502

Sale Conducted By:

2 3

YODER MDL. M-2/1/2 TUBE MILL SYSTEM

HAVEN TUBE RE-CUT MACHINE

COMPLETE TUBE MILL SYSTEMYODER, incl.: Littell 4,000-lb. cap. Mdl. 40-12 dbl. end coil reel, 12" max. width, Whit-ney Jensen strip shear, Lee Shaffer strip butt welder system, vert. accumulator tower, Yoder Mdl. M-2-1/2 6-stand tube roughing mill, Mdl. 300C sizing head, Thermatool Mdl. VT100 high freq. induction welder and controls, cooling zone w/built-in recircu-lating coolant tank and paper filter, Yoder Mdl. M2-1/2 4-stand sizing mill w/Loopco Turks-Head, Pro-Eco 4-post flying cut-off shear w/air clutch and controls, Central control pedestal, (3) spare Yoder roll stands, wide array of tube tooling for various rd. and oval tube sizes.

TUBE RE-CUT MACHINEHAVEN MDL. 873, 1/2" to 3" cap., Allen Bradley Panelview 550 PLC unit, magazine infeed unit, adj. programmable length stop, S/N 5340.

TUBE CUT-OFF MACHINESMODERN 3" MDL. 3LD, magazine infeed unit, front chamfer slide and rear cut-off, elec. stop, kick-off bar, S/N 3LD3390.MODERN 3" MDL. 3L, front mtd. cut-off slide, magazine barfeed, pneu. end stop, pneu. swing-in chamfer tool, S/N 3L3312.

CNC TUBE BENDERSEAGLE EATON LEONARD MDL. VB100HP, new 1999, Premier Industrial Controller CNC control, 3-axis bending motions, approx. 180" max. tube size, mandrel extractor, S/N VB100HPRH224060IPC0299.EATON LEONARD VECTOR BEND MDL. VB150MD, new 1991, EL2000 CNC control system, 3-axis bending motions, approx. 12' max. bending length, mandrel extractor, S/N VB150MDR249MTL1291.EATON LEONARD VECTOR BEND MDL. VB40, Adaptive Motion Control CNC control, 3-axis bending motions, 12' max. tube length, S/N MC3310485.

HORIZONTAL ANGLE BENDERTAURING MDL. AEFA50H2, new 1998, spare tube bending rolls, roll position indica-tor, control pedestal, S/N 876.

HORIZONTAL TUBE BENDERS(2) PINES NO. 1-1/4, rotating turret stop, hyd. mandrel extractor, control pedestal, safety mat, S/N 11290-77102 (R.H.), S/N 11290-76087 (L.H.).(2) PINES NO. 3/4 L.H., turret stop, mandrel extractor, control pedestal, safety mat, S/N 11015-61168, S/N 11015-71012.

VERTICAL TUBE BENDERSPINES NO. 3T, 40 HP self-contained hyd. system, control pedestal, S/N 44350-6517.CUSTOM, heavy fabricated steel design, hyd. operation, self-contained 30 HP hyd. unit, dual palm button controls, wide assortment of bending dies.

TUBE SPINNING & FLARING MACHINEAPPROX. 8'L., self-centering steadyrests, 8" 3-jaw hyd. chuck, hyd. driven roller head, 20 HP variable spd. DC drive motor, (3) headstock spds.: 1,125, 1,400 and 1,750 RPM, self-contained hyd. system, assorted spinning wheels, control pedestal.

MISCELLANEOUS TUBE MACHINERY

& ACCESSORIESFENN MDL. 30 HYDRAULIC TUBE SWAGING MACHINE adj. lengths from 12" to approx. 48", dual palm button controls, unitized hyd. system; PINES 660 TUBE END FINISHING MACHINE, fabricated steel stand, foot pedal control, pneu. clamping; PINES BENDATA TUBE MEA-SURING MACHINE, S/N 18200-81106; HUGE ASSORTMENT OF PINES AND VECTOR BEND TOOLING in various sizes.

AUCTION

>TAURING HORIZONTAL ANGLE BENDER

<PINES 1-1/4" TUBE BENDER

DAY ONE

<MODERN #3LD TUBE CUT-OFF

2AVAILABLE

<EAGLE EATON LEONARD CNC TUBE BENDER

CNC

2 3AIR FEEDS, 18" SERVO FEED LINE

200 T. OBI PUNCH PRESS

VIEW OF AIDA 121 T. GAP FRAME PRESSES

COE 12" SERVO FEED LINE

OBI PRESSESBLISS 200 T. CAP. MDL. C200, 8" stroke, 24" shut ht., 4-1/2" pwr. ram adj., 38" x 28" bolster area (L-R, F-B), 35 SPM, air cushion bed, Wintriss clutch and brake controls w/pro-grammable cam outputs, control pedestal, S/N C52321.BLISS 75 T. CAP. MDL. C75.(2) ROCKFORD 60 T. CAP. MDL. 60-W, 4" stroke, 17-1/2" shut ht., 3" adj., 50 SPM, 32" x 21" bed area (L-R, F-B), air clutch and brake, dual palm button controls, S/N 6443-72 (backgeared), S/N 6432-72 (flywheel), S/N 6508-74.WAYNE APPROX. 60 T. CAP. MDL. WN1-60, 4" stroke, 14" shut ht., 3" adj., air clutch and brake, 34" x 23" bed size (L-R, F-B), Link Logic brake monitor, S/N 1020.(2) WALSH 55 T. CAP. MDL. 5-1/2, air clutch and brake, dual palm button control pedestal, 30" x 20" bed area (L-R, F-B), S/N 6746, S/N N.A.CLEARING 45 T. CAP. TORC-PAC MDL. 45 HORNING AND WIRING PRESS, 6" stroke, 37" to 49" shut ht., 2-1/2" adj., 60 SPM, air clutch and brake, adj. height bed, 30" x 24" bed area (L-R, L-B), dual palm button controls, S/N 57-7179.ROUSSELLE NO. 4, 26" x 16" bed area (L-R, F-B), air clutch and brake, S/N 718.ROCKFORD 40 T. CAP. MDL. 40W, 3" stroke, 11-1/2" shut ht., 3" adj., 100 SPM, air clutch and brake, dual palm buttons, S/N 6479-73.NIAGARA MDL. A4-1/2 BACKGEARED, air clutch and brake, Minster clutch and controls, S/N N.A.

PRESSROOM ACCESSORIES

100’s OF DIE SETS, for Chromcraft furniture manufacturing, incl. die racks.

GAP FRAME PRESSES(3) AIDA 121 T. CAP. MDL. NC1-110(2), 7.8" stroke, 13.7" die ht., 3.5" pwr. ram adj., V/S: 35–65 SPM, 24.8" x 20.4" slide area (L-R, F-B), 42.1" x 26.7" bolster area (L-R, F-B), air clutch and brake, S/N 00211-8157, S/N 0211-8641, S/N 10211-8858.(2) AIDA 88 T. CAP. MDL. NC1-80(2), 6.29" stroke, 12.59" die height, 3.14" pwr. ram adj., V/S: 40–85 SPM, 21.2" x 18.1" slide area (L-R, F-B), 37.4" x 23.6" bolster area (L-R, F-B), air clutch and brake, S/N 10408-0147, S/N 00208-8266.AIDA 70 T. CAP. MDL. NC1-6(2), 5.51" stroke, 11.81" die space, 2.75" pwr. ram adj., V/S: 45–85 SPM, 18.89" x 15.75" slide area (L-R, F-B), 34.25" x 20.47" bolster area (L-R, F-B), air clutch and brake, S/N N.A.

SERVO FEED LINES18" AIR FEEDS, consisting of: Mdl. DRF-3 servo feeder, S/N 990316, cascade input rolls; Mdl. PST2.75 7-roll straightener w/infeed and outfeed pinch rolls, S/N 990314; 8,000-lb. cap. Mdl. R-80X18 pwrd. coil reel, w/air op. snubber roll, elec. brake, S/N 990312.12" COE PRESS EQUIPMENT, consisting of: Mdl. CPRE-8-112 Servo Master servo feed, S/N 21957-1131; Mdl. CPR-PO-4018 combined reel and straightener unit, 4,000-lb. cap., 18" max. width reel w/air operated snubber roll, Mdl. CPPS-225-12 7-roll 12"W. straightener, S/N 21957-2, w/input and output air operated pinch rolls, loop controls, S/N 21957-3.

RAW MATERIALSWIDE SELECTION OF NEW CARBON STEEL TUBING INVENTORY, from 1/2" to 3" dia. (in bundles); 100’s OF LOTS OF LAMINATE MATERIALS for table tops of every size and description; 1,000’s OF SHEETS OF MDF MA-TERIAL, 3/4", 1" and 1-1/2" sizes, in full sheets and trimmed sheets, new in stacks.

>PARTIAL VIEW OF TUBING

INVENTORY

<AIDA 88 T. GAP FRAME PRESS

AUCTION:THURS. & FRI.JUNE 18 & 19

9:00 A.M.INSPECTION Wed, June 17

9:00 A.M. to 4:00 P.M.

& Morning of Sale

V/S

V/S

4 5

MIG WELDING ROBOTSABB MDL. IRB1400-M98 6-AXIS, new 1999, sgl. axis 2-pos. rotating trunion table, ABB robotic controller, Miller Auto Invision MIG welder, Coolmate III weld chiller, Project No. W81F002, S/N 14-10146.(2) GENERAL ELECTRIC MDL. P60 6-AXIS, Mdl. RC1560 controller, Miller Invision 456P inverter style MIG welder, Miller Robotic Interface II weld controller, incl. full cage surround, S/N J62154, S/N N/A.MOTOMAN MDL. YR-SK6-C000 6-AXIS, Yasnac Mdl. SRB0038 robot controller, Miller Deltaweld Mdl. 452 MIG welder, Miller Robotic Interface II weld controller, Coolmate cooler, S/N RH9101-611H-1J62172.

MIG & TIG WELDERS(2) HOBART MDL. RC-250 MIG WELDERS, 250 amp @ 35 v., 100% duty cycle, Miller S54D wire feeder, on fabricated stand, S/N 12RT-41269, S/N 12RP33008.(8) MILLER DELTAWELD MDL. 452 MIG WELDERS, 450 amp @ 38 v., 100% duty cycle, Miller 50 Series wire feeder, on fabricated stand, S/N KH476286, S/N KH567319, S/N KH456518, S/N KJ127979, S/N KH556536, S/N KH556532, S/N KJ108896 S/N KH485134.(2) MILLER DELTAWELD 451 MIG WELDER, 450 amp @ 38 v., 100% duty cycle, Miller 50 Series wire feeder, S/N KE582327 S/N JK645208.MILLER MDL. MP30E MIG WELDER, 300 amp @ 35 v., 100% duty cycle, Miller S54D wire feeder, on fabricated stand, S/N HU161139.OTC INVERTER TURBO PULSE 350 PULSE MIG WELDER, S/N N.A.CHEMTRON SUREWELD MDL. 330A/BP WELDER, S/N P363192.MILLER MDL. CP300 WELDER, 300 amp @ 35 v., 100% duty cycle, S/N N.A.MILLER SYNCROWAVE MDL. 250DX TIG WELDER, 250 amps @ 30 v., 40% duty cycle, TIG runner chiller base, TIG torch and controls.(2) CUSTOM MIG WELDING STATIONS, adj. guns, fabricated fixture unit, (2) Miller Deltaweld 300 welding pwr. sources, Miller 24V constant spd. wire feeders.

MISCELLANEOUS FABRICATION MACHINERY

RICHARDS MDL. B-51 MK II MULTI-BEND ROTARY TABLE BENDER, 3/4" square mild steel cap., 5/8" rd., 3/8" x 1-1/2" flat mild steel, Redlion Mdl. SCL controls, caster base.TENNSMITH MDL. H50216 HYDRAULIC SHEAR, 16 gauge x 52" cap., foot pedal control, S/N 18672.CUSTOM PYRAMID BENDING ROLL, 45"L. x 4" dia. rolls, gear motor drive w/manual screw down, fabricated steel frame.DOALL 36" MDL. 3613-1 VERTICAL BANDSAW, 13" max. cutting height, blade welder and grinder, S/N N.A.GROB MDL. NS24 VERTICAL BANDSAW, tilting table, S/N N.A.GROB MDL. NS18 VERTICAL BANDSAW, tilting table, S/N N.A.WELLS MDL. 8 HORIZONTAL BANDSAW, 1" blade, caster base, S/N 19039.W.F. WELLS MDL. L9 HORIZONTAL BANDSAW, 1" blade, coolant system, S/N 8657.TRENNJAEGER MITER HEAD MDL. BC260 COLD SAW, infeed roller conveyor, 12" blade dia., pneu. vise, S/N 979.ELMES APPROX. 75 T. CAP. 4-POST HYDRAULIC PRESS, 48" x 18" T-slotted bed, 48" x 28" T-slotted ram, 6" hyd. ram dia., dual palm button control station, self-contained hyd. system.ENERPAC 30 T. CAP. H-FRAME PRESS, elec. driven pump, hyd. table raising mechanism, 29" btwn. uprights.SCOTCHMAN 40 T. CAP. MDL. 3140 IRONWORKER, angle shear, punch and flat shear, S/N 7706F92781.RIDGID MDL. 535 PIPE THREADER, roller base, assorted accessories.RIDGID PIPE THREADING HEAD, 2" to 4" cap., square drive.

MAINTENANCE & MRO ITEMSHUGE ASSORTMENT OF REPAIR PARTS AND SHOP MAINTENANCE ITEMS INCL.: PWR. TRANSMIS-SION EQUIPMENT: bearings, sprockets and gears; pillow blocks; roller chain; V-belts; couplings; etc. ELECTRICAL SPARES: diverse array of new and re-built motors, disconnect boxes, contactors, relays wire in many sizes, fuses, switches, conduit. PLUMB-ING ITEMS: pneumatic, hydraulic and water fittings of all types; hydraulic coupling press; black iron fittings; valves; regulators; moisture traps; directional valve. HARDWARE ITEMS: huge assortment of fasteners, wire rope, hooks and clevises, nails, staples, wash-ers, and MUCH, MUCH MORE!

ABB ROBOTIC WELDING CELL MILLER DELTA-WELD 452 MIG WELDERABB ROBOTIC WELDING CELL

HUGE ASSORTMENT OF MRO ITEMSHUGE ASSORTMENT OF MRO ITEMS

AUCTION DAY ONE

8AVAILABLE

4 5

TOOLROOM MACHINERYSERVO MDL. SERVO5000 CNC BED MILL, Servo CNC control w/retrofit-ted LCD monitor, 4-axis, 10" x 54" table, swivel head, bed type design, pwr. drawbar, 5 HP variable spd. head, 10" dia. Mecatecnica Mdl. PHVD250 vert./horiz. rotary table w/servo drive, S/N 970793.BRIDGEPORT SERIES 1 TURRET-TYPE VERTICAL MILL, 9" x 42" table, chrome ways, 2-axis D.R.O., long. and cross pwr. feeds, S/N 179312.CINCINNATI TOOLMASTER MDL. TM-MT TURRET-TYPE VERTICAL MILL, 12" x 48" table, long. pwr. feed, variable spd. spndl., S/N 6J2F1AAF90.VAN NORMAN MACHINE CO. MDL. 2R5-28 UNIVERSAL MILL, 12" x 50" swivel table, vert./horiz. swivel spndl., 3-way pwr. feeds, S/N 3013-1061.CINCINNATI 15" X 72" HYDROSHIFT ENGINE LATHE, spds.: 25–980 RPM, taper attach., 10' 3-jaw chuck, 1-5/8" spndl. hole, S/N HT316-E.MSC MDL. 14-40G GAP BED ENGINE LATHE, 2-axis D.R.O., spds.: 22–1,800 RPM, 2-1/8" spndl. hole, inch/metric thdng., S/N 1JW102.FEELER HIGH ACCURACY SERIES II SECOND OPERATION LATHE, com-pound crosslide assembly, tailstock, spds.: 230–3,500 RPM, S/N N.A.ROCKWELL MDL. 15-120 TOOLROOM RADIAL ARM DRILL, 24" x 28" T-slotted oil groove table, S/N 156448.CINCINNATI 3' X 7-1/2" RADIAL ARM DRILL, plain box table, S/N N.A.ARBOGA MDL. A2608W GEARED HEAD DRILL, new 1997, S/N 339689.(2) WILTON STRAND MDL. 20612 GEARED HEAD DRILL, adj. height bed, S/N 75511.OKAMOTO 12" x 24" MDL. 124N HYDRAULIC SURFACE GRINDER, S/N 676.K.O. LEE MDL. S618HG HYDRAULIC SURFACE GRINDER, 6" x 18" cap., S/N 18798-KA.CINCINNATI NO. 2 TOOL and CUTTER GRINDER, motorized workhead attach.HELLER MDL. SA315 SAW SHARPENER, up to 10" blade cap.FIELD ROUTER BIT GRINDER, S/N 5921.

TOOLROOM & SHOP EQUIPMENTAPPROX. (30) PEDESTAL DRILL PRESSES, single spndl., by Clausing and Power-matic, in 15", 18" and 20" sizes; CLEMCO MDL. ACD GLOVE BOX TYPE BLAST CABI-NET, recirculating shot system, S/N 205; (2) JOHNSON GAS APPLIANCE MDL. 175L HEAT TREAT OVENS, 33,000 BTU’s, S/N 850KA; DOALL FREE STANDING BANDSAW BLADE WELDER w/grinder; LARGE QTY. OF ASSORTED RAW MATERI-ALS–rounds, flats, squares, cold roll bars, hot roll flats, aluminum tubing and bars; MILWAUKEE DIE FILER.ASSORTMENT OF FORGED STEEL C-CLAMPS; STRIPPIT UNIPUNCHES; GRANITE SURFACE PLATE; ASSORTED PRECISION MEASURING EQUIPMENT; FORGED HOLD-DOWN CLAMPS; LETTER/NUMBER STENCILS; GRINDING MANDRELS; DRILL PRESS VISES; H.D. MILLING VISES w/swivel bases; PEDESTAL GRINDERS; ASSORTED NO. 50 and NO 40 NST MILLING HOLDERS; WIDE ARRAY OF CUTTING TOOLS incl. drills, mills, endmills, die clamps; ASSORTED HAND TOOLS; FASTENERS in sorted cabinets; BENCH VISES; H.D. WORKBENCHES; GRINDING WHEELS; ABRA-SIVES; SHOP VACUUM; DEVILBISS SPRAY BOOTH; SEVERAL 2"W. HORIZONTAL BELT SANDERS; SEVERAL EXTENDED SHAFT BALDOR BUFFING MACHINES.

MISC. MATERIAL HANDLING EQUIPMENTRAMJET HYDRAULIC TRASH COMPACTOR, hyd. gate, self-contained hyd. system, skid mtd.RITE-SIZE MDL. 96-5-120 CARDBOARD SLITTER, 96" max. width, 120" arbor, 5" arbor dia.(50) CORRUGATED STEEL TUBE CARRIERS, 36"W. x 12'L.(25) 35"W. X 72"L. TUBE CARRIERS, w/crane bales.EQUIPTO H.D. MEZZANINE, 50'L. x 40'W. approx. size, (2) stairways, 48" material elevator, 8' ht. under mezzanine, bar grate deck, safety rail (partially disassembled and ready for transport).TOWABLE MATERIAL CARTS; DOZENS 36 X 72 AND LARGER TOWABLE PLAT-FORM CARTS.OVAL MDL. 515 BOX STRAPPING MACHINE, 36" x 60" opening.DOZENS OF PEDESTAL FANS.1- AND 1-1/2 CU. YD. SELF-DUMPING HOPPERS.PNEUMATIC DIAPHRAGM PUMPS, up to 2" cap.

SELF-DUMPING HOPPERS

MSC GAP-BED ENGINE LATHE OVALSTRAPPING 515 BOX STRAPPER

>EQUIPTO

MEZZANINE

<RITE-SIZE CARDBOARD SLITTER

SERVO 4-AXIS CNC BED MILL

CNC

6 7

CNC ROUTERSSHODA MDL. PLATINUM ALPHA, new 2004, dual 102"W. x 63" F-B shuttle worktables, 14-station auto. tool changer w/HSK spndl. taper, integrated cross cut saw unit, multiple spndl. drilling head, Sullair Mdl. VS-16-40A vacuum pump, 40 HP drive skid frame mtd., S/N 003-V87189 (vacuum pump to be offered separately), S/N S5W-J0301.

NORTHWOOD MDL. 26NW266, new 1997, Allen Bradley 9 Series CNC control, (2) 8.9 KW routing heads, cross cut saw head, multiple spndl. drilling head, dual 72" L-R x 75" F-B shuttle tables, Travaini Pumps Mdl. TR0500S-1A vacuum pump, new 2002, 40 HP drive motor, air cooled, S/N 15228-02 (vacuum pump to be offered separately), S/N 1410-087.

TABLE TOP ROUTERSONSRUD MDL. WS60-1, new 1999, 42" T-slotted round table, swing arm, belt driven routing head, Baldor dynamic brake unit, 15 HP router head drive, S/N 998141-10.

RYE MDL. R90SM SPEEDMAX, 60" T-slotted table dia., 20 HP routing head, swing arm provision for second routing head, S/N R90SM.

TOP MASTER MDL. NAM3000 3-SPINDLE, new 2001, S/N 3147.

A&B PRODUCTS 2-STATION, pneu. activated ball roller table, variable rotation spds. for auto. table routing incl. final station belt sanding unit.

SANDERSEKSTROM-CARLSON MDL. 112 EDGE, 8" belt, 60" sanding length.

GREENLEE TWIN SPINDLE VERTICAL SPINDLE SANDER, 42" x 66" cast iron worktable, 30" dist. btwn. spndls.

LINCOLN 20" MDL. DS20 DISC SANDER, 2 HP drive motor, tilt table.

MAX 30" DISC SANDER, 3 HP drive motor, tilting table w/geared tilt, dust collection shield.

INDIANA MDL. 12 OSCILLATING HORIZONTAL EDGE SANDER, 8" belt, screw type table adj., heavy cast base.

ROLL COATING MACHINESBLACK BROTHERS, 44" roll length, backup roll, caster base, S/N 131174.

(2) BLACK BROTHERS, 68" roll width, 8" roll dia., S/N 131068, S/N N.A.

LAMINATION PRESSTYLER POWER POD, air operated, dual 60" R-L x 75-1/2" F-B platens, 126-1/2" R-L x 75-1/2" F-B roller bed, pneu. compression, pwr. screw adjustment to ram, approx. 42" max. opening size.

RF PLYWOOD PRESSES(2) L&L MACHINERY, RF platens, 48" x 48" bed, approx. 48" open height, approx. 36" stroke, sliding guards, elec. controls.

WOODWORKING SAWSDIEHL MDL. SL52WA RIP SAW, 48" throat depth, S/N 66M1604-967.

MATTISON MDL. 202 RIP SAW, 24" throat depth.

CUSTOM CROSS CUT SAW w/CNC Tiger stop, 42" max. cutting width, 96" max. linear stop travel, aux. scoring saw, pneu. clamping.

KOPCO MDL. 47A-30LH CROSSCUT, approx. 24" head stroke, foot pedal control, variable fd. spd., 14" blade dia., S/N 89214.

CTD MDL. DM200 DOUBLE END MITER SAW, approx. 84" max. dist. btwn. heads, S/N 859.

(4) TANNEWITZ 36" MDL. GH VERTICAL BANDSAWS, 5 HP blade drive, 35-1/2" x 37" table, S/N 73227, S/N 13521, S/N 73253 w/extended table.

SEVERAL DELTA CHOP SAWS.

MISCELLANEOUS WOODWORKING MACHINERY

(2) UP-ACTING TABLE DESIGN MULTIPLE SPINDLE BORING MACHINES, independent motorized spndls.

GRACO THERMAL FLOW GLUE DISPENSING SYSTEM, dispenser gun, auto. height adjustment.

(12) TABLE TOP CLAMPS in rect., hexangular and oval patterns, mtd. on trunion bases.

AGET DUST COP MDL. RT40-D1 FABRIC TUBE DUST COLLECTOR, blower unit, cyclone, S/N 8199.

LARGE QTY. OF SAWS, ROUTER BITS AND ASSORTED WOODWORKING PERISHABLE TOOLING.

SHODA PLATINUM ALPHA CNC ROUTER BLACK BROTHERS ROLL COATER TYLER PWR. POD LAMINATION PRESS

ONSRUD TABLE-TOP ROUTER L&L RF PLYWOOD PRESSESDIEHL 48" RIP SAW

CNC

6 7

POWER SPRAY BOOTH SYSTEMSNORDSON, 42"W. x 66" ht. opening, (2) reciprocators w/(3) guns each, manual spray system, (6) slide-in color modules–each w/powder hopper and rotary sieve, (9) Nordson 100 Plus gun amplifiers.NORDSON, 43"W. x 66" ht. opening, (2) oscillators w/(4) guns each, (8) Nordson Versa Spray II gun amplifiers, slide-in color module, (1) spare slide-in color module, staircases, sliding booth transport.(18) PCF and NORDSON POWDER HOPPERS, stainless steel, in two sizes.

RACK BURN-OFF OVENSCONTROLLED PYROLYSIS MDL. PRC260, natural gas fired, 60"W. x 84" x 60" interior dims., 750,000 BTU rated cap., roller cart, S/N 4602.CONTROLLED PYROLYSIS MDL. PTR260, S/N 17665.

SPECIALIZED FURNITURE EQUIPMENTDOZENS OF PNEUMATIC HEATED PLATEN PRESSES for seat cush-ion manufacturing.(2) EDGE SAW MANUFACTURING VERTICAL URETHANE FOAM SAW, w/rip fence.MCNEAL FEMCO MDL. 4612-4013A HORIZONTAL URETHANE FOAM SAW, air float conveyor, travelling vacuum table.UNITED MDL. A UNITED CLICKER PRESS, S/N 2446.

SELF-CONTAINED WASH SYSTEMMOTOR DRIVEN HIGH PRESSURE SPRAYER, recirculating tank.

SOLVENT STILLP23 PURIFICATION SYSTEM, stainless steel construction, used for acetone recycling.

CUT & SEW MACHINERYLECTRA SYSTEMS VECTOR 2500 CNC FABRIC CUTTING MACHINE.MEASUREGRAPH MDL. 26472 FABRIC PAYOFF UNIT, 72" max. width, S/N 5625.SEVERAL INDUSTRIAL SEWING MACHINES BY JUKI, PFAFF AND OTHERS.MACBETH SPECTRALIGHT INSPECTION CABINET.

OVERHEAD BRIDGE CRANELOADLIFTER 7-1/2 T. X APPROX. 45' SPAN, top running, dbl. girder, pendant control, approx. 300' linear I-beam rail and electrification system.

FREE STANDING PEDESTAL JIB CRANESABELL-HOWE 3 T. X 11' REACH, approx. 12' ht. under rail, Yale 3 T. cap. elec. chain hoist, S/N 79B0621.

ABELL-HOWE 2 T. X 16' REACH, approx. 10' ht. under rail, Yale 3 T. cap. elec. chain hoist, S/N N.A.

CONCO 1 T. CAP., articulated arm, Conco 1,500-lb. cap. cup lift.

CONTRX 1/4 T. CAP., Anver air operated vacuum cup lift.

HYDRAULIC BALERSMAX-PAK MDL. MP7240 VERTICAL, 72" x 40" opening, S/N 01004386.

PIQUA MDL. HD2200, S/N N.A.

AIR COMPRESSORSINGERSOLL RAND MDL. SSR-EP200 ROTARY SCREW, 200 HP motor, 874 CFM cap., air cooled, skid mtd., noise enclosure, S/N F0474U90.

SULLAIR MDL. LS20S, 200 HP motor.

INGERSOLL RAND MDL. SSR-EP150, 150 HP motor, 670 CFM cap., air cooled, skid mtd., fully enclosed, S/N F7646U93097.

INGERSOLL RAND MDL. SSRXF150 ROTARY SCREW, 150 HP motor, Aero Mdl. 3516-4 refrigerated air dryer, intercooler receiver and accessories, S/N 2453152-002.

INGERSOLL RAND MDL. SSR-EP125, new 2002, 125 HP motor, 571 CFM cap., skid mtd., air cooled, noise enclosure, S/N F38567U02282, Wilkerson Mdl. WRW-1750-4-A air dryer, new 2003, 1,750 SCFM, S/N 03-20-96-6120.

(2) INGERSOLL RAND MDL. SSR-EP60, 60 HP motor, 239 CFM cap., S/N F0594U90, S/N F0927U90.

AIR DRYERSWILKERSON MDL. A14-HH-P00 REFRIGERATED, 1,000 CFM cap., S/N 03-28-91-5589.

INGERSOLL RAND MDL. E200A REFRIGERATED, S/N 52E499.

ULTRA AIR MDL. LFT-620 ULTRAPACK DESICCANT, new 2002, dual tank unit, S/N U36726.

AIR/TAK MDL. 800-A REFRIGERATED, 800 SCFM, S/N 9908004.

>INGERSOLL-

RAND 200 HP

ROTARY SCREW

AIR COMPRESSOR

>2 T.

FREE-STANDING PEDESTAL JIB CRANE

>MAX-PAK

HYDRAULIC BALER

<COPPER PLATING RACKS

LECTRA SYSTEMS CNC FABRIC CUTTING MACHINE

CNC

8 9

CONTRACT FURNITURE

FINISHED GOODSHUGE ASSORTMENT OF CONTRACT AND OFFICE FURNISHINGS INCLUDING: OVER $200,000 VALUE AIRPORT SEATING INVENTORY, 100's of ergonomic office chairs, 1,000’s of metal/plastic stack chairs, assorted executive, lobby and desk chairs, assorted office power centers, and much, much more!

HIGH QUALITY DINETTES & RESIDENTIAL FURNISHINGS

Hundreds of oak, walnut, mahogany and laminate dining tables, (150+) glass table tops in assorted shapes and sizes, 100’s of wooden dining chairs, 100’s of upholstered dining chairs, assorted upholstered stools, coffee tables, bookcases, end tables, 1,000’s of table bases, legs, and other components, and much, much more!

RAW MATERIALS100’s OF BOLTS OF UPHOLSTERY FABRIC by UTP, Dillon, Momentum, Morbern, JLA Home Fabrics and others; DOZENS OF 40"W. X 1,000' VISQUEEN PLASTIC ROLLS; 1,000’s OF CARDBOARD CARTONS IN EVERY SIZE.

WORK-IN-PROCESSTEN’s OF 1,000’S PIECES OF PREFORMED AND PRECUT PLYWOOD CHAIR BACKS AND SEATS of all styles and variet-ies; PRECUT HARDWOOD RAILS AND DOVETAIL DRAWER SLIDES; PREFORMED AND MOULDED HARDWOOD TABLE EDGE MATERIAL; 1,000’s OF PRECUT AND ASSEMBLED URETHANE CUSHIONS in boxes; BACKS; PREFORMED PLASTIC SEATS; ARM RESTS; CASTERS.TREMENDOUS SELECTION OF

UPHOLSTERY FABRIC PARTIAL VIEW OF RAW MATERIALS

PARTIAL VIEW OF NEW CHROMCRAFT INVENTORY

CHROMCRAFT ERGONOMIC OFFICE CHAIR EXAMPLE OF CHROMCRAFT CONTRACT FURNITURE

AUCTION DAY TWOHUGE 2-DAY AUCTION AT

CHROMCRAFT REVINGTON#1 Quality Lane, SENATOBIA, (Memphis Area) MS 38668

(See Directions on Back Page)

AUCTION: THURSDAY & FRIDAY JUNE 18 & 19 • 9:00 A.M.INSPECTION: Wednesday, June 17,

9:00 A.M. to 4:00 P.M. & Morning of Sale

PARTIAL VIEW OF DINETTE TABLES PARTIAL VIEW OF NEW CHROMCRAFT INVENTORY

On-Site Bidding in Senatobia, (Memphis Area) Mississippi or Bid Via Webcast at

All items are brand new in boxes. See our website for

further details

www.pmi-auction.com

8 9

RESEARCH & DEVELOPMENT LABORATORY

SCMI PIN ROUTER, adj. height table.POWERMATIC TABLE SHAPER.HAUSFIELD MDL. 2B BENDER.CRAFTSMAN H.D. 10" RADIAL ARM SAW.QUEEN CITY EXTENDED SPINDLE BUFFING UNIT.MAX SINGLE SPINDLE VERTICAL SANDER.COMBINATION BELT AND DISC SANDER.ROCKWELL MDL. 14 VERTICAL WOOD CUTTING BANDSAW.BHM 6" OSCILLATING EDGE SANDER, Series 400.PINES 3/4" TUBE BENDER, large assortment of dies, S/N 101-8B-51.POWERMATIC MDL. 72 TABLE SAW, rip fence, S/N 8072006.MINIMAX ARBOR PRECISION WOODWORKING LATHE w/accessories.CUSTOM HORIZONTAL HYDRAULIC TUBE BENDER.GROB MDL. NS36 VERTICAL BANDSAW, S/N 940.CLAUSING 13 X 40 VARIABLE SPEED ENGINE LATHE w/accessories.TENNSMITH 48' MDL. HBU48 BOX AND PAN BRAKE, 12-gauge cap., S/N 16548.DELTA ROCKWELL 15" PEDESTAL DRILL PRESS.BRIDGEPORT 2J VERTICAL MILLING MACHINE, 9" x 48" table, variable spd. head.YATES AMERICAN VERTICAL WOODCUTTING BANDSAW, 36" throat, tilt table, S/N B26573.

PIN ROUTER ITW MIMA PALLET WRAPPERBHM EDGE SANDER

POWERMATIC TABLE SAW

SCISSOR LIFT TABLE

FURNITURE TEST EQUIPMENT

ENERPAC 25 T. H-FRAME SHOP PRESS, w/elec. driven hyd. unit.

COMPLETE WELDING DEPART-MENT, INCL. COMPACTOMAT-IC PC300 MIG WELDER, WELD-ING TABLE AND LARGE ASSORTMENT OF WELDING ACCESSORIES.

PEXTO 3' HAND SLIP ROLL.

ARBOR PRESS.

LARGE AMOUNT OF RAW MA-TERIALS FOR R&D PURPOSES.

COMPLETE FURNITURE TEST-ING FACILITIES INCL. WEAR TESTERS, TENSION MACHINES AND OTHER RELATED TEST MACHINES.

MISCELLANEOUS MATERIAL HANDLING EQUIPMENT

ITW MIMA MDL. 4.4S-LP 4 SE-RIES SHRINK WRAPPER, 60" dia. rd. pwrd. table, approx. 72" max. pallet ht., S/N 19733.

100’s OF WOODEN PALLETS, most are 56 x 60, hard wood frame.

SEVERAL VESTIL 2,000-LB. CAP. SCISSOR TABLES, some w/roller conveyor tops.

LARGE QTY. OF 24"W. IDLER ROLLER CONVEYOR, in 5' and 10' sections w/adj. height legs, 4" roll spacing, 2" dia. rollers, some on roller cart base.

WIDE ASSORTMENT OF POW-ERED BELT CONVEYOR up to 52"W.

SEVERAL BULLDOG MDL. 12VO-600X3D BATTERY CHARGERS, 24 v. output.

APPROX. (20) HYDRAULIC PAL-LET JACKS; HYDRAULIC TUB MOVERS.

THERMAL FORMING MACHINEALLOYD 24" X 36", new 2003, S/N M2003-14.

10 11

FORKLIFTS(2) TOYOTA 10,000-LB. CAP., Mdl. 7FGCU45, new 2010, LPG, 92" triple stage mast, 187" lift height, cushion tire, 42" forks, S/N 71663, S/N 71666.

YALE 8,000-LB.CAP., Mdl. GLC080LCNSBV085, LPG, 24" L.C., 122" max. lift, cushion tires, S/N N514633.

(2) NISSAN 6,000-LB. CAP., Mdl. MCUG1F2F30LS (C600), new 2011, LPG, 83" triple stage mast, 189" lift height, side shift, cushion tires, 42" forks, S/N CUG1F2-9R0925, S/N CUG1F2-9R0922.

YALE 6,000-LB. CAP., Mdl. GLC060VXNVSE085, new 2007, LPG, 85" triple stage mast, 190" lift height, side shift, cushion tires, 42" forks, S/N A910V10600E.

YALE 6,000-LB. CAP., Mdl. GLC060VXNVSE086, new 2006, LPG, 86" triple stage mast, 187" lift height, side shift, cushion tires, 42" forks, S/N A910V07441D.

YALE 6,000-LB. CAP., Mdl. GLC060TGNUAE084, new 1998, LP, 24" L.C., 164" max. lift, side shift, non-mar cushion tires, S/N E187V07444V.

YALE 5,000-LB. CAP., Mdl. GLC050VXNVSQ085, new 2008, LPG, 85" four stage mast, 250" lift height, cushion tires, side shift, 42" forks, S/N A910V13858F.

YALE 5,000-LB. CAP., Mdl. GLC050VXNVSE094, new 2005, LPG, 94" triple stage mast, 218" lift height, side shift, cushion tires, 42" forks, S/N A910V03980C.

YALE 5,000-LB. CAP., Mdl. GLC050VXNVSE085, new 2005, LPG, 85" triple stage mast, 194" lift height, side shift, cushion tires, 42" forks, S/N A910V04817C.

YALE 5,000-LB. CAP., Mdl. GLC050TGEUAE084, new 2005, LPG, 84" triple stage mast, 194" lift height, side shift, cushion tires, 42" forks, S/N E187V24575C.

YALE 5,000-LB. CAP., Mdl. GLC050RGNUAE082, new 2004, LPG, 82" triple stage mast, 189" lift height, side shift, cushion tires, 42" forks, S/N E187V23094B.

YALE 4,000-LB. CAP., Mdl. GLC040AF-NUAE090, LPG, 24" L.C., 165" max. lift, side shift, cushion tires, S/N A809N07182V.

TOYOTA APPROX. 4,000-LB. CAP., Mdl. 7FGCU20, LP, 159" max. lift, side shift, cush-ion tires, S/N 69119.

CATERPILLAR APPROX. 4,000-LB. CAP., Mdl. 6C20, LP, side shift, cushion tires, S/N 4EMO7383.

YALE 3,700-LB. CAP., Mdl. GLC040AE-NUAE083, LPG, 24" L.C., 156" max. lift, side shift, non-mar cushion tires, S/N N523740.

(2) YALE 3,000-LB. CAP., Mdl. GLC030AF-NUAE090, new 1998, LPG, 24" L.C., 206" max. lift, side shift, cushion tires, S/N A809NO7169V, S/N A809N07165V.

YALE 2,900-LB. CAP., Mdl. GLP030AFNU-AE084, LPG, 24" L.C., 128.7" max. lift, cush-ion tires, S/N B810N08136Y.

ELECTRIC FORKLIFTYALE 2,500-LB. CAP., Mdl. ESCO30ABN-24TE 083, 190" max. lift, 24 v., S/N A824N07429X.

ORDER PICKERYALE 2,500-LB. CAP., Mdl. OSO30EBN24-TE105, 240" max. fork ht., 42" forks, 24 v., tow clamp, S/N B801N02529X.

ELECTRIC PALLET JACKSYALE 4,000-LB. CAP., Mdl. MPB040-EN24T2748, 24 v., S/N B827N14889B.

(2) YALE 4,000-LB. CAP., Mdl. MP-B040EN24T2748, new 2010, 27X48, 24-volt battery.

TOYOTA LPG FORK LIFT W/ BOX CLAMP OTTAWA COMMANDO-30 SPOTTER TRUCK

SAMPLE VIEW OF VAN TRAILERS

(1 OF 2) TOYOTA 10,000-LB. CAP. FORKLIFTS (1 OF 5) YALE 5,000-LB. CAP. FORKLIFTS (1 OF 2) NISSAN 6,000-LB. CAP. FORKLIFTS

2010 2011AS NEW AS2008

PERSONNEL CARRIERSMOTREC MDL. E-240 PERSONNEL CARRIER, S/N 1009281.

TAYLOR DUNN SS-534, new 2002, S/N 152356.

PALLET JACKS(2) HYSTER 4,000-LB. CAP., Mdl. W40Z, new 2010, 27X48, S/N B218N20142H, S/N B21820521H.

BOX CLAMP TRUCKTOYOTA MDL. 42-6FGCU25, LP engine, 3,200-lb. cap. @ 20" L.C., carton clamp, cushion tires, 78" max. clamp width, S/N 68366.

TUGGER(5) YALE MDL. MTR700LCN24T TUGGER/PWRD. CART, new as 2008, S/N A817N02114F, S/N A817 N02115F, S/N A817N01651C, S/N A817N01695D, S/N A817N02112F.

FORK TRUCK SERVICE LIFTAUTOQUIP 20,000-LB. CAP., Mdl. CFL-200, pendant control, S/N 118640551.

SPOTTER TRUCKSOTTAWA MDL. 30, new 2001, S/N 302900.

OTTAWA COMMANDO MDL. 30, new 1998, S/N M077490.

5TH WHEEL DOLLY.

VAN STORAGE TRAILERS(2) KENTUCKY APPROX. 53', 5,000-lb. G.V.W.R., tandem axle, VIN 1KKVA5327PL093515, VIN 1KKKVA-5325P L 093514.

(9) STRICK 42', tandem axle.

GREAT DANE 53', Mdl. 7311TJWL, 65,000-lb. G.V.W.R., VIN 1GRAA0628RB004301.

10 11

MANLIFT EQUIPMENTSNORKELIFT MDL. UNO33E ARTICULATED BOOM, 500-lb. platform cap., 32' max. platform height, S/N 876780388.SKYJACK 700-LB. CAP. MDL. 220 SELF-PRO-PELLED SCISSOR, new 1999, 20' max. drive ht., S/N 608247.

FLOOR SWEEPERSAMERICAN LINCOLN MDL. 578-613, new 1997, S/N 480115.AMERICAN LINCOLN MDL. 505-202, gasoline en-gine, S/N 750143.FACTORY CAT.

UTILITY TRACTORKUBOTA MDL. L3010, diesel engine, 3-pt. hitch, rear pwr. take-off, Big Bee Sunburst 72" front end loader, 60"W. DRAG GRADER BOX, S/N 30099.

ZERO TURN LAWN MOWERHUSQVARNA 54" CUT, Kohler 26 HP gasoline en-gine, late model.

AIR COMPRESSORINGERSOLL RAND MDL. SSRXF150 ROTARY SCREW, 150 HP motor, Aero Mdl. 3516-4 refriger-ated air dryer, intercooler receiver and accessories, S/N 2453152-002.

SNORKELIFT 33E ARTICULATED BOOM LIFT SKYJACK SCISSOR LIFTKUBOTA DIESEL TRACTOR

AMERICAN LINCOLN LPG FLOOR SWEEPER

OFFICE FURNITURE & EQUIPMENT, PHOTO LAB, MORE

LARGE OFFERING OF HIGH QUALITY EXECUTIVE OFFICE FURNISHINGS OFFERED AT THIS SALE, INCL.: COMPLETE EXECUTIVE OFFICE SUITES, DOZENS OF EXECUTIVE AND SECRETARIAL DESKS, OCCASIONAL FURNITURE, FILING CABINETS, SHELVING UNITS, ERGONOMIC CHAIRS IN MANY STYLES AND FABRICS, SEVERAL CONFERENCE ROOMS. PRINT DEPARTMENT INCL.: PAPER SHEAR AND DRILL, BLUEPRINT DUPLICATOR, HP PLOTTER, SEVERAL COPY MACHINES. PHOTOGRAPHY LAB INCL.: DEARDORFF 11 X 14 VIEW CAMERA, STUDIO LIGHTING, ENLARGERS, FILM DEVELOPMENT LAB AND A HUGE ASSORTMENT OF PROPS, WIDE VARIETY OF OFFICE MACHINES.

WALNUT OFFICE FURNITUREDEARDORFF 11" X 14" VIEW CAMERA

DAY TWOAUCTION INSPECTION: Wednesday, June 17, 9:00 A.M. to 4:00 P.M.

& Morning of Sale

On-Site Bidding in Senatobia, (Memphis Area) Mississippi or Bid Via Webcast at

TO BE SOLD ON BOTH DAYSAPPROX. (500) CORRU-GATED STEEL METAL TUBS, 36 x 48 x 24, stackable w/forklift entry; HUGE AS-SORTMENT OF TABLE AND CHAIR BASES CONTAINED IN THE ABOVE.

CORRUGATED METAL TUBS HUGE QUANTITY OF WIP

500AVAILABLE

QS-0026932

P.O. Box 19100Houston, TX 77224-9100

DATED MATERIAL – PLEASE DELIVER

WORLD FAMOUS MANUFACTURER OF

COMMERCIAL & RESIDENTIAL FURNITUREFEATURING: WIDE SELECTION OF STAMPING

MACHINERY, HIGH-VOLUME TUBE EQUIPMENT, WOODWORKING MACHINERY, TOOLROOM

EQUIPMENT, PLANT SUPPORT ITEMS PLUS: HUGE INVENTORY OF FINISHED

RESIDENTIAL & COMMERCIAL FURNITURE, RAW MATERIALS & WORK IN PROCESS

SENATOBIA, (Memphis Area) MISSISSIPPI

2-DAY AUCTION

2-DAY AUCTIONTHURSDAY, JUNE 18 & FRIDAY JUNE 19

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

ATTENTION: PLANT MANAGEROR EQUIPMENT BUYER

ASSOCIATION OFMACHINERY AND

EQUIPMENT APPRAISERS

A 15% Buyer’s Premium Will Apply On-site. An 18% Buyer’s Premium Will Apply to Webcast Bids. See Above Rules for Participation.

Everything will be sold to the highest bidder or bidders for cash in accordance with the auctioneer’s Customary Terms of Sale, copies of which will be posted on the premises.ALL PAYMENTS MUST BE MADE BY CASH, CASHIER’S CHECK, WIRE TRANSFER OR COMPANY CHECK WITH BANK LETTER GUARANTEEING PAYMENT TO PLANT & MACHINERY INC.Here is an example of what your letter should be: Mr. “Customer Name” is a customer of this bank. This bank will guarantee unqualified payment to PMI on the account listed herein up to the amount of $___________. This letter is good until July 20, 2015.In default of payment of bills in full within the time therein specified, the Auctioneer in addition to all other remedies allowed by law, may retain all monies received as deposit or otherwise, as liquidated damages. All items must be removed by the time announced at the start of the sale.Lots not paid for and/or removed within the time allowed may be resold at public or private sale without further notice, and any deficiency, together with all expenses and charge of resale, will be charged to the defaulting purchaser.The buyer acknowledges that he or an agent has inspected all of the assets upon which he will be bidding and/or does purchase.

Buyer agrees to accept assets purchased “AS IS,” WITH “ALL FAULTS” AND “WITH REMOVAL AT BUYER’S RISK AND EXPENSE.” THE AUCTIONEER EXPRESSLY DISCLAIMS ON THE PART

OF THE AUCTIONEER AS AGENT AND THE SELLER, ANY WARRANTY AS TO FITNESS OR USABILITY OF ALL THE ASSETS, AND THE BUYER EXPRESSLY WAIVES ANY CLAIM IN RESPECT TO ANY POSSIBLE FUTURE USE OF ANY ASSET PURCHASED FOR ANY PURPOSE WHATSOEVER.The buyer does hereby assume and does agree to indemnify and hold the auctioneer harmless from any future claim which shall pertain to the fitness or use of that asset as being purchased. Riggers, movers, electricians and buyers performing work at the Auction Site must provide PMI with evidence of insurance. The insurance coverage must be at a level acceptable to PMI and to the seller. PMI reserves the right to withdraw items, alter the order of the sale, accept bids from the seller, and group lots as it may deem appropriate. This auction may include consignment items.Although all information has been obtained from sources deemed reliable, the auctioneer and seller make no warranty or guarantee, expressed or implied, as to the accuracy of the infor-mation herein contained, or contained in our catalog. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the auction. Although it is not likely, auction sales are subject to cancellation or postponement. Kindly contact auctioneer prior to attendance.These terms and conditions may be modified or supplemented by language in the catalog avail-able at the sale site or by announcement at the start of the sale. Bidders should be attentive to those announcements and to the catalog language.

PARTIAL TERMS & CONDITIONS

UNABLE TO ATTEND?Bid on-line in real time atTO PARTICIPATE YOU MUST:1. Register at www.BidSpotter.com. Use the link to

BidSpotter on PMI’s website calendar. DO IT NOW.2. Either wire transfer, or overnight delivery service a

cashier’s check deposit in the amount of $3,000 (U.S. Bidders) or $10,000 (Foreign Bidders) to: Plant & Machinery Inc. 1304 Langham Creek Drive, Suite 454, Houston, TX 77084 Wire transfer instructions can be found at pmi-auction.com

You must be registered and have your deposit in the hands of Plant & Machinery, Inc. at least 24 hours prior to the start of the auction. Failure to register and/or failure to send your deposit to Plant & Machinery, Inc. may disqualify you from bidding. DON’T WAIT.If you need assistance, don’t hesitate to call (713) 691-4401.ALL WEBCAST BIDS ARE SUBJECT TO AN 18% BUYER’S PREMIUM.

DIRECTIONSFROM MEMPHIS INT’L AIRPORT: Exit airport using Jim McGehee Pkwy. and Winchester Rd. W. Turn left on Airways Blvd. and proceed approx. 2-1/2 miles. Turn right onto E Shelby Dr./TN-175 and proceed approx. one mile. Merge onto I-55 S toward Jackson, Mississippi and proceed approx. 28 miles. Merge onto E Main St./MS-4 toward Senatobia/Northwest Mississippi Community College. Turn right onto Norfleet Dr. /MS-4 and continue to follow MS-4 for approx. one mile to the auction site on right-hand side, 1 Quality Lane, Senatobia, MS 38668. Watch for auction signs.

LODGINGAmerica’s Best Value Inn ............................................................ (662) 562-5647 513 E Main Street, Senatobia, MS 38668Days Inn ...................................................................................... (662) 562-5244 501 E Main Street, Senatobia, MS 38668La Quinta Inn & Suites Memphis Airport ....................................(901) 791-9200 2979 Millbranch Road, Memphis, TN 38116

FINANCE YOUR AUCTION

PURCHASEConserve Your Cash &

Increase Your Bidding Power

AuctionLea$e Provides M&E Financing

With Approvals from $5,000 to $999,000

(800) 438-1470

Apply Online: www.AuctionLease.com