atlona · 2020. 9. 25. · at-line-pro5. | toll free: 1-877-536-3976 for international:...

www.atlona.com | toll free: 1-877-536-3976For International: 1-408-962-0515

User Manual

AtlonA11 Inputs Professional Video

Presentation Switcher/Scaler with Dual HDMI Output

AT-LINE-PRO5

www.atlona.com | toll free: 1-877-536-3976For International: 1-408-962-0515 2

TABLE OF CONTENTS

1. Introduction .................................................. 3

2. Applications .................................................. 3

3. Package Contents .................................................. 3

4. Features .................................................. 3

5. Specification .................................................. 4

6. Operation Controls and Functions .................................................. 4

6.1. Front Panel .................................................. 4

6.2. Rear Panel .................................................. 5

7. Remote Control .................................................. 5

8. On-Screen-Display .................................................. 6

9. RS232 Protocols .................................................. 7

9.1. Set Command .................................................. 8

9.2. Status Command .................................................. 9

9.3. Key Command .................................................. 9

10. Connection and Installation .................................................. 11

11. Safety Information .................................................. 12

12. Warranty .................................................. 13

13. Atlona Product Registration .................................................. 14


INTRODUCTION

PACKAGE CONTENTS

APPLICATIONS

The Atlona AT-LINE-PRO5 is a professional quality 11-input video scaler/processor/presentation switcher that allows 4 x HDMI or DVI, 1 x DVI, 3 x VGA, 2 x Component, 2 x Composite video inputs to be scaled to a dual HDMI Output (outputs are mirrored). The on-screen display gives you the ability to change video options, scal-ing options, output resolutions and much more. With additional functions as RS232 and IR the AT-LINE-PRO5 is easier than ever to control or integrate with preexisting system.

• AT-LINE-PRO5 – 11 input video scaler/presentation switcher• 5V/3A DC power supply (110/240V)• IR Remote Control• Rack Ears • Instructions manual

• Conference Room/Board Room - Display any in-source on a conference room TV or and Projector at the same time. • School/University – perfect for any digital interactive classroom. Ability to plug-in up to 11 sources which will be scaled to the native resolution of the display.• Places of Worship – display any source material on the project and get the same resolution at all the time.

FEATURES

• Scaling any incoming Signal whether HDMI, DVI, VGA, Component or Composite to the native resolution of the display: VGA~WUXGA or 480p~1080p• Audio embedding from any input to HDMI outputs• De-embedding audio from HDMI outputs to coaxial output to allow video be routed to a projector and audio to an amplifier.• PAL to NTSC and NTSC to PAL conversion 50/60Hz• RS232 commands available for control systems • IR Commands are available for using a universal remote or an IR control system• Standard 1U size for easy rack mounting• Each input is accompanied with stereo audio input, including HDMI so that it could be used with DVI sources• Full 3D support on HDMI pass through• Horizontal and vertical shift, color, tint, brightness, contrast, detail, sizing, and top and bottom vertical blanking adjustments• HDMI 1.3, HDCP 1.2 and DVI 1.0 compliant• Supports input PC timing: VGA ~WUXGA (Reduced Blanking Rate), 480p~1080p• Support input HDMI timing: 480i~1080p60 and VGA~WUXGA (Reduced Blanking Rate)• 1080p@60Hz color video up to 12 bits, 1080p@60Hz• Supports audio PCM 2CH• Supports deep color of 8 / 10 / 12 bits• Supports OSD• Auto-detection and auto-tune• 3-D motion adaptive & 3-D video noise reduction• Video-over-graphic overlay• ADC for both video and audio• Image of color bar: If user is seeing a color bar, it means that there is no input signal present. The color bar will be active for 15min and after the Atlona device will go to the stand-by mode and disconnect from the display. As soon as incoming video signal will resume, the Atlona device will establish a new connection with the display.


SPECIFICATIONS:

OPERATION CONTROLS AND FUNCTIONS

TMDS Clock Frequency 225MbpsInput Ports 4 x HDMI, 2 x VGA, 2 x Component Video, 2 x CompositVideo,

1 x DVI, 1 x CoaxialOutput Ports 2 x HDMI, 2 x Coaxial AudioHDMI Resolutions 480i~ 1080p60 and VGA~WUXGAHDCP/EDID CompliantInput/Output Resolution 640x480~1920x1200 (4:3, 16:9, 16:10)

480p, 576p, 720p (50/60Hz), 1080p (30/50/60)ESD Protection Human body model: ± 8kV (air-gap discharge)

± 4kV (contact discharge)Power Supply 5V/3A DC (110/240v CE/FCC/UL certified)Dimensions 17.16 x 6.57 x 1.92 (inch)/ 436 x 167 x 49 (mm)Weight 4.6LB/2.1KGChassis Material MetalSilk Skin Color BlackPower Consumption 8.5WOperating Temperature 0°C ~ 40°C / 32°F~104°FStorage Temperature -20°C ~60°C / -4°F~140°FRelative Humidity 20~90% RH (non-condensing)

6.1. Front Panel

1. Power button and LED: Press this button to Turn ON or set the device to standby mode. The LED will illuminate in red when the power is ON.2. IR Receiver: This IR window receives IR signal from the supplied IR remote control.3. CV1/2: Press CV1/CV2’s button to select composite video inputs 1 or 2, the LED will illuminate in red.4. COMP1/2: Press COMP1/COMP2’s button to select component inputs 1 or 2, the LED will illuminate in red.5. VGA 1/2: Press VGA 1/VGA 2’s button to select input 1 or 2, the LED will illuminate in red.6. DVI 1: Press this button to select DVI input, the LED will illuminate in red.7. HDMI 1~4: Press HDMI 1/HDMI 2/HDMI 3/HDMI 4’s button to select input 1, 2, 3 or 4, the LED will illuminate in red8. MENU: Press this button to bring up the On Screen Display.9. -/+: Press -/+ buttons to adjust parameters in the On Screen Display. Once the selection is made press Enter button.10. ENTER: Press this button after each selection.

POWER CV 1 CV 2 COMP1 COMP2 VGA 1 VGA 2 HDMI 1 HDMI 2 HDMI 3 HDMI 4 MENU ENTERDVI 1

AT-LINE-PRO5

11 input Professional Video Scalerwith dual HDMI output

① ② ③ ④ ⑤ ⑦ ⑨ ⑩⑧⑥


6.2. Rear Panel

1. RS-232: This port could be used between a 3rd party control system for control purposes or a computer for firmware updates.2. HDMI & Coaxial Out 1~2: These ports are to connect to HD Display and or Projector for displaying the output signal. The DVI/HDMI adapter can be used if the display has DVI input. Each HDMI output is accompanied with Coaxial audio output in case if DVI display is being used or HDMI is only used for video. The HDMI will contain audio and video signal no matter separate audio output is used or not. 3. HDMI IN 1~4 & L/R: These ports are to connect input sources such as Blu- ray players, Cable Boxes, Comput- ers with HDMI or DVI outputs. If user has a DVI source, the 3.5mm audio input will allow to embed audio4. DVI IN & L/R: This port is to connect to computer video sources. The DVI port is accompanied with mini stereo audio input.5. VGA IN 1~2 & L/R: These slots are to connect input sources such as Laptop, Desktop Computers, Document Camera or any other VGA source. Each VGA input is accompanied with mini stereo audio input.6. Y/PB/PR & L/R 1~2: These ports are to connect input sources such as DVD player, Cables Boxes or HD Cam- era. Each Component input is accompanied with stereo audio input.7. CV & L/R: These ports are to connect to input sources such as VCR or Security Camera. Each Composite input is accompanied with stereo audio input.8. COAX/Spdif: This port is to connect any source with S/PDIF audio output to a scaler. S/PDIF input could be assigned to any video input under On Screen Didplay.9. DC 5V: This port is to connect to a supplied power supply.

REMOTE CONTROL

1. POWER ON/OFF: Press these buttons to power on the device or to set it to standby mode. 2. HDMI1~4: Press to select HDMI inputs 1~4. 3. PC 1~2: Press to select VGA inputs1/2. 4. DVI 1: Press to select DVI input source. 5. CV 1~2: Press to select Composite Video input. 6. COMP1~2: Press to select Component video inputs 1/2. 7. MENU: Press to bring up On Screen Display. 8. Exit: Press to exit from a sub menu or main menu. 9. ▲/▼/◄/►: Press ▲/▼ to move the highlight bar to your desired param eter during the On Screen Display operation. Press ◄/► to increase/ de crease the setting value of a selected parameter.10. OK (Enter): Press to confirm your selection.11. Reset: Press the button to reset the unit’s firmware setting to the factory default.12. Auto Adjust: Press to optimize the position of the picture (picture centering) on the screen.13. Output Resolution: Press to directly select output resolution. For other out put resolutions that are not available on the remote please enter On Screen Display Menu to select them.

DC 5V

CV1

CV2

R

R L

L

R L COAX Cr/Pr Cb/Pb Y/HD2

Cr/Pr Cb/Pb Y/HD1R L

VGA 1VGA 2

L/RL/RL/RL/RL/RL/RL/R

DVI1HDMI 4 HDMI 3 HDMI 2 HDMI 1HDMI OUTHDMI OUT

COAX OUT

COAXOUT

RS-232

②① ⑥ ⑦③ ④ ⑤ ⑥ ⑧ ⑥ ⑦ ⑨

①

②

③

④

⑧

⑨

⑪

⑬

⑤

⑥

⑦

⑫

⑩


1st Tier Option 2nd Tier Option AdjustmentVIDEO - PICTURE MODE USER / STANDARD / VIVID / MOVIE

- CONTRAST 0 ~ 100 of Contrast Level- BRIGHTNESS 0 ~ 100 of Brightness Level- HUE 0 ~ 100 of Hue Leve- SATURATION 0 ~ 100 of Saturation Level- SHARPNESS 0 ~ 100 of Sharpness Level- SCALE OVERSCAN / UNDERSCAN / LETTERBOX

/PANSCAN / FULL- NR LOW / MIDDLE / HIGH / OFF- EXIT Back to the 1st Tier

COLOR - COLOR TONE USER / NORMAL / WARM / COOL- RED 0 ~ 100 of Red Color Level- GREEN 0 ~ 100 of Green Color Level- BLUE 0 ~ 100 of Blue Color Level- EXIT Back to the 1st Tier

OUTPUT - NATIVE / VGA / SVGA / XGA / SXGA/UXGA / 480i / 480p / 720p@60Hz /1080i@60Hz / 1080p@60Hz / 576i / 576p/ 720p@50Hz / 1080i@50Hz / 1080p@50 /WXGA / WSXGA / WUXGA

OSD - HPOSITION 0 ~ 100 of OSD Horizontal Position- VPOSITION 0 ~ 100 of OSD Vertical Position- TIMER 0 ~ 100 of OSD Show Time (sec.)- TRANSP 0 ~ 100 of OSD Transparent Level- EXIT Back to the 1st Tier

AUDIO - SOURCE HDMI / L/R / COAXIAL- DELAY OFF / 40MS / 110MS / 150 MS- SOUND ON / MUTE- EXIT Back to the 1st Tier

INFORMATION - SOURCE (Input interface)INPUT (Input Resolution)OUTPUT (Output Resolution)VERSION (Firmware Version)

EXIT - Close the OSD Menu

ON-SCREEN-DISPLAY


RS-232 transmission format:Baud Rate : 19200 bpsData Bit : 8 bitsParity : NoneStop Bit : 1 bitFlow Control: None

9.1. Set Command:Command Code Response Description

S POWER 0 >POWER OFF SET POWER OFFS POWER 1 >POWER ON SET POWER ONS SOURCE 0 >SOURCE CV1 SET SOURCE CV1S SOURCE 1 >SOURCE CV1 SET SOURCE CV2S SOURCE 2 > SOURCE COMP1 SET SOURCE COMP1S SOURCE 3 > SOURCE COMP2 SET SOURCE COMP2S SOURCE 4 > SOURCE PC1 SET SOURCE PC1S SOURCE 5 > SOURCE PC2 SET SOURCE PC2S SOURCE 6 > SOURCE DVI SET SOURCE DVIS SOURCE 7 > SOURCE HDMI1 SET SOURCE HDMI1S SOURCE 8 > SOURCE HDMI2 SET SOURCE HDMI2S SOURCE 9 > SOURCE HDMI3 SET SOURCE HDMI3

S SOURCE 10 > SOURCE HDMI4 SET SOURCE HDMI4S OUTPUT 0 > OUTPUT NATIVE OUTPUT EDID NATIVE MODES OUTPUT 1 > OUTPUT VGA VGA(640X480@60) OUTPUTS OUTPUT 2 > OUTPUT SVGA SVGA(800X600@60) OUTPUTS OUTPUT 3 > OUTPUT XGA XGA(1024X768@60)) OUTPUTS OUTPUT 4 > OUTPUT SXGA SXGA(1280X1024@60) OUTPUTS OUTPUT 5 > OUTPUT UXGA UXGA(1600X1200@60) OUTPUTS OUTPUT 6 > OUTPUT 480i 480i OUTPUTS OUTPUT 7 > OUTPUT 480p 480p OUTPUTS OUTPUT 8 > OUTPUT 720p 720p@60 OUTPUTS OUTPUT 9 > OUTPUT 1080i 1080i@60 OUTPUTS OUTPUT 10 > OUTPUT 1080p 1080p@60 OUTPUTS OUTPUT 11 > OUTPUT 576i 576i@60 OUTPUTS OUTPUT 12 > OUTPUT 576p 576p@60 OUTPUTS OUTPUT 13 > OUTPUT 720p 720p@50 OUTPUTS OUTPUT 14 > OUTPUT 1080i50 1080i@50 OUTPUTS OUTPUT 15 > OUTPUT 1080p50 1080p@50 OUTPUTS OUTPUT 16 > OUTPUT WXGA WXGA (1280x800@60) OUTPUTS OUTPUT 17 > OUTPUT WSXGA WSXGA (1680x1050@60) OUTPUTS OUTPUT 18 > OUTPUT WUXGA WUXGA (1920X1200@60) OUTPUTS OUTPUT 19 > OUTPUT 1080p30 1080p@30 OUTPUT

RS232 PROTOCOLS


S OUTPUT 20 > OUTPUT WXGA+ WXGA+(1440X900@60) OUTPUTS OUTPUT 21 > OUTPUT SXGA+ SXGA+ (1400X1050@60) OUTPUT

S SIZE 0 > SIZE FULL SCALER FULL OUTPUTS SIZE 1 > SIZE OVERSCAN SCALER OVERSCAN OUTPUTS SIZE 2 > SIZE UNDERSCAN SCALER UNDERSCAN OUTPUTS SIZE 3 > SIZE LETTERBOX SCALER LETTERBOX OUTPUTS SIZE 4 > SIZE PANSCAN SCALER PANSCAN OUTPUT

S PICTUREMODE 0 > PICTUREMODE STANDARD SET PICTUREMODE STANDARDS PICTUREMODE 1 > PICTUREMODE MOVIE SET PICTUREMODE MOVIES PICTUREMODE 2 > PICTUREMODE VIVID SET PICTUREMODE VIVIDS PICTUREMODE 3 > PICTUREMODE USER SET PICTUREMODE USERS CONTRAST 0~100 > CONTRAST 0~100 CONTRAST 0~100 ADJUST

S BRIGHTNESS 0~100 > BRIGHTNESS 0~100 BRIGHTNESS 0~100 ADJUSTS HUE 0~100 > HUE 0~100 HUE 0~100 ADJUST

S SATURATION 0~100 > SATURATION 0~100 SATURATION 0~100 ADJUSTS SHARPNESS 0~100 > SHARPNESS 0~100 SHARPNESS 0~100 ADJUST

S NR 0 >NR OFF SET NR MODE OFFS NR 1 >NR LOW SET NR MODE LOWS NR 2 >NR MIDDLE SET NR MODE MIDDLES NR 3 >NR HIGH SET NR MODE HIGH

S PCPHASE 0~63 > PCPHASE 0~63 PC MODE PHASE 0~63 ADJUSTS PCCLOCK 0~100 > PCCLOCK 0~100 PC MODE CLOCK 0~100 ADJUST

S PCHPOSITION 0~100 > PCHPOSITION 0~100 H POSITION 0~100 ADJUSTS PCVPOSITION 0~100 > PCVPOSITION 0~100 V POSITION 0~100 ADJUST

S COLORTEMP 0 >COLORTEMP NORMAL SET COLOR TEMPERATURE MODE NORMALS COLORTEMP 1 >COLORTEMP WARM SET COLOR TEMPERATURE MODE WARMS COLORTEMP 2 >COLORTEMP COOL SET COLOR TEMPERATURE MODE COOLS COLORTEMP 3 >COLORTEMP USER SET COLOR TEMPERATURE MODE USER

S RED 0~100 > RED 0~100 COLOR ”RED” ADJUSTS GREEN 0~100 > GREEN 0~100 COLOR “GREEN“ ADJUSTS BLUE 0~100 > BLUE 0~100 COLOR “BLUE“ ADJUST

S OSDHPOSITION 0~100 > OSDHPOSITION 0~100 OSD H POSITION 0~100 ADJUSTS OSDVPOSITION 0~100 > OSDVPOSITION 0~100 OSD V POSITION 0~100 ADJUSTS OSDTIMEOUT 0~100 > OSDTIMEOUT 0~100 OSD TIMEOUT 0~100 SETTING

S OSDBACKGROUND 0~8 > OSDBACKGROUND 0~8 OSD BACKGROUND 0~8 ADJUSTS AUDIOMUTE 0 > AUDIOMUTE OFF AUDIO ACTIVES AUDIOMUTE 1 > AUDIOMUTE ON AUDIO MUTE

S AUDIODELAY 0 > AUDIODELAY OFF AUDIO DELAY OFFS AUDIODELAY 1 > AUDIODELAY 40ms AUDIO DELAY 40mSecS AUDIODELAY 2 > AUDIODELAY 110ms AUDIO DELAY 110mSecS AUDIODELAY 3 > AUDIODELAY 150ms AUDIO DELAY 150mSec


9.2. Status Command:Command Code Response Description

R POWER >POWER OFF~ON SHOW POWER STATUSR SOURCE >SOURCE CV1~HDMI4 SHOW SOURCE STATUSR OUTPUT >OUTPUT NATIVE~SXGA+ SHOW OUTPUT STATUS

R SIZE >SIZE FULL~PANSCAN SHOW SIZE STATUSR PICTUREMODE > PICTUREMODE

STANDARD~USERSHOW PICTUREMODE STATUS

R CONTRAST > CONTRAST 0~100 SHOW CONTRAST VALUER BRIGHTNESS > BRIGHTNESS 0~100 SHOW BRIGHTNESS VALUE

R HUE > HUE 0~100 SHOW HUE VALUER SATURATION > SATURATION 0~100 SHOW SATURATION VALUER SHARPNESS > SHARPNESS 0~100 SHOW SHARPNESS VALUE

R NR > NR OFF~HIGH SHOW NR STATUSR PCPHASE > PCPHASE 0~63 SHOW PC PHASE VALUER PCCLOCK > PCCLOCK 0~100 SHOW PC CLOCK VALUE

R PCHPOSITION > PCHPOSITION 0~100 SHOW PC H-POSITION VALUER PCVPOSITION > PCVPOSITION 0~100 SHOW PC V-POSITION VALUER COLORTEMP > COLORTEMP NORMAL~USER SHOW COLOR TEMP MODE

R RED > RED 0~100 SHOW COLOR RED VALUER GREEN > GREEN 0~100 SHOW COLOR GREEN VALUER BLUE > BLUE 0~100 SHOW COLOR BLUE VALUE

R OSDHPOSITION > OSDHPOSITION 0~100 SHOW OSD H-POSITION VALUER OSDVPOSITION > OSDVPOSITION 0~100 SHOW OSD V-POSITION VALUER OSDTIMEOUT > OSDTIMEOUT 0~100 SHOW OSD TIMEOUT VALUE

R OSDBACKGROUND > OSDBACKGROUND 0~8 SHOW OSD BACKGROUND STATUSR AUDIOMUTE > AUDIOMUTE OFF~ON SHOW AUDIO MUTE STATUSR AUDIODELAY > AUDIODELAY OFF~150ms SHOW AUDIO DELAY STATUS

9.3. Key Command:Command Code Response DescriptionK POWER >POWER PANEL/REMOTE CONTROL KEY POWERK CV1 > CV1 PANEL/REMOTE CONTROL KEY CVK CV2 > CV2 PANEL KEY SVK COMP1 > COMP1 PANEL KEY COMP1K COMP2 > COMP2 PANEL KEY COMP2K PC1 > PC1 PANEL / REMOTE CONTROL KEY PC1K PC2 > PC2 PANEL KEY PC2K DVI > DVI PANEL KEY DVIK HDMI1 > HDMI1 PANEL / REMOTE CONTROL KEY HDMI1K HDMI2 > HDMI2 PANEL KEY HDMI2K HDMI3 > HDMI3 PANEL KEY HDMI3K HDMI4 > HDMI4 PANEL KEY HDMI4K MENU > MENU PANEL/REMOTE CONTROL KEY POWER


K DEC > DEC PANEL KEY “-”K INC > INC PANEL KEY “+”K ENTER > ENTER PANEL KEY ENTER/REMOTE CONTROL KEY OKK SOURCE > SOURCE REMOTE CONTROL KEY INPUTK VGA > VGA REMOTE CONTROL KEY VGAK SVGA > SVGA REMOTE CONTROL KEY SVGAK XGA > XGA REMOTE CONTROL KEY XGAK SXGA > SXGA REMOTE CONTROL KEY SXGAK UXGA > UXGA REMOTE CONTROL KEY UXGAK 1080i60 > 1080i60 REMOTE CONTROL KEY 1080iK 480p > 480p REMOTE CONTROL KEY 480pK 720P60 > 720p60 REMOTE CONTROL KEY 720pK 1080P60 > 1080p60 REMOTE CONTROL KEY 1080pK UP > UP REMOTE CONTROL KEY “▲”K DOWN > DOWN REMOTE CONTROL KEY “▼”K LEFT > LEFT REMOTE CONTROL KEY “<“K RIGHT > RIGHT REMOTE CONTROL KEY “>”K EXIT > EXIT REMOTE CONTROL KEY EXITK AUTO > AUTO REMOTE CONTROL KEY AUTOK RESET > RESET REMOTE CONTROL KEY RESET


CONNECTION AND INSTALLATION

Laptops

Blu-ray

DVD

Live Camera

VCR

Laptop

andor

HDTV Projector

PC


SAFETY INFORMATION

Safeguards

To reduce the risk of electric shock, do notexpose this product to rain or moisture.

If the wall plug does not fit into your localpower socket, hire an electrician to replaceyour obsolete socket.

Do not modify the wall plug.Doing so will void the warranty and safetyfeatures.

This equipment should be installed nearthe socket outlet and the device shouldbe easily accessible in case it requiresdisconnection.

Precautions

FCC Regulations state that anyunauthorized changes or modifications tothis equipment not expressly approved bythe manufacturer could void theuser’s authority to operate thisequipment.

Operate this product using only theincluded external power supply. Use ofother power supplies could impairperformance, damage the product or causefires.

In the event of an electrostatic discharge,this device may automatically turn off. If thisoccurs, unplug the device, and plug it backin.

Protect and route power cords so they willnot be stepped on or pinched by anythingplaced on or against them. Be especiallycareful of plug-ins, or cord exit points fromthis product.

Avoid excessive humidity, suddentemperature changes or temperatureextremes.

Keep this product away from wet locationssuch as bathtubs, sinks, laundries, wetbasements and swimming pools.

Use only accessories recommended byATLONA to avoid fire, shock or otherhazards.

Unplug the product before cleaning. Usea damp cloth for cleaning. Do not usecleaning fluid or aerosols, which couldenter the unit and cause damage, fire orelectrical shock. Some substances mayalso mar the finish of the product.

Never open or remove unit panels or makeany adjustments not described in thismanual. Attempting to do so could exposeyou to dangerous electrical shock or otherhazards. It may also cause damage to yourAT-LINE-PRO5. Opening the product will void the warranty.

Do not attempt to service the unit. Insteaddisconnect it and contact your AuthorizedATLONA reseller or contact ATLONAdirectly.


1. LIMITED WARRANTY Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the ac-

companying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdic-tions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to Customer.

2. CUSTOMER REMEDIES Atlona Technologies and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’

option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited Warranty is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be war-ranted for the remainder of the original warranty period or 3 year, whichever is longer.

3. NO OTHER WARRANTIES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLIERS

DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IM-PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPE-CIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.

4. NO LIABILITY FOR DAMAGES TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL ATLONA TECHNOLOGIES OR

ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, IN-CIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN AD-VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES’ AND ITS SUPPLIERS’ ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTU-ALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.


ATLONA PRODUCT REGISTRATION

Thank you for purchasing this Atlona product — we hope you’ll enjoy it.

We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.At Atlona, we respect and protect your privacy and assure you that your registration information is completely secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-ranty rights.

To register go to www.atlona.com/registration

www.atlona.com | toll free: 1-877-536-3976For International: 1-408-962-0515

atlona · 2020. 9. 25. · at-line-pro5. | toll free: 1-877-536-3976 for international:...

Documents