atlas copco screwdrivers - indpro (m) sdn...

Atlas Copco Screwdrivers Securing productivity from 0.005 Nm

0.005 Nm

0.1 Nm

1 Nm

5 Nm

0.010 Nm

12 Nm

0.5 Nm

2 AT L A S C O P C O S C R E W D R I V E R S

Contents

Introducing five levels of functionality

Level 1. Torque controln LUM pneumatic screwdrivern EBL Standard electric brushless screwdrivern BCP Battery clutch screwdriver

Level 2. Batch count + Torque control n EBL Advanced electric brushless screwdriver

Level 3. Joint control + Batch count + Torque controln Tensor DL electric screwdriver n MicroTorque TM electric screwdriver

Level 4. Critical fastening + Joint control+ Batch count + Torque controln Tensor SL electric screwdrivern MicroTorqueTM electric screwdriver

Level 5. Zero fault fasteningn ToolsNet PF n ToolsTalk MT Net

Technical data, ordering numbers and accessories

Screwdriver bits

Vibration and noise emission values

4 – 5

6 – 9

10 – 13

14 – 17

18 – 21

22 – 23

24 – 37

38 – 42

43

AT L A S C O P C O S C R E W D R I V E R S 3

For every low-torque assembly need, the Atlas Copco screwdriver range range has a solution – from ultra-low torque timepiece assembly to industrial scale electronics production. The range features inno vative technology and advanced control capabilities, combined with unrivalled ergonomics.

Level 5: Zero fault fastening

You need zero fault fastening plus level 4 functionality.

Functionality

LEVEL 1

LEVEL 2

Level 4: Critical fastening

You need critical fastening plus level 3 functionality.

Level 3: Joint control

You need fastening that ensures joint integrity, plus level 2 functionality.

Level 2: Batch count

You need to know that every screw has been fastened, plus level 1 functionality.

Level 1: Torque control

You need precision fastening, cycle after cycle. Torque must be accurate and consistent.

Leve

ls

Five levels of functionality


Functionality

LEVEL 2

LEVEL 3

LEVEL 4

LEVEL 5


The EBL electric screwdriver is in line with Atlas Copco’s reputation. With this tool I get a significant process improvement, thanks to the improved quality of the fastening. This is a result of the better torque accuracy and consistency. The EBL will also increase productivity be-cause it is light, very easy to handle and more comfortable to use.

Mr Jesus Reyes, Project Engineer, Valeo Mexico.


LEVEL 1 – TORQUE cONTROL

Functionality level 1g Torque control

Accurate and consistent torque control reduces customer warranty claims and production costs, improves productiv-ity and minimizes production line downtime.

Problem:Repetitive stress injuries and fatigue.Solution:Screwdrivers with fast clutch release, ergonomic design and soft, warm grips for optimum operator comfort.

Problem:High noise levels in the working environment. Solution: EBL screwdriver – quiet operation thanks to brushless motor.

Problem:Damage to plastic threads and delicate components.Solution: The Atlas Copco soft-stop feature reduces the shock levels transmitted to delicate joints during the tightening cycle.

Problem:High running costs for tools.Solution:Tools designed to last for many years with low service and maintenance costs.

For industrial assembly operations, accurate fastening and productivity go hand-in-hand. The application of accurate and consistent torque on high-volume production applications is crucial to efficient assembly.


LUM/LTV pneumaticscrewdrivers

• From 0.025 to 15.5 Nm

• Rapid shut-off

• Low reaction impulse

• Low noise level

• Operator comfort

• Lubrication-free

• Soft stop options

• Vacuum pick up accessories for LUM 02

• ESD approved

For technical data, see pages 24 – 27

EBL standard electricbrushless screwdrivers

• From 0.05 to 4.5 Nm

• Rapid shut-off

• Brushless motor – longer lifespan

• Low noise level

• Unique non-tamper torque setting

• Lever start or push start

• Vacuum pick-up accessories

• Soft stop versions

• ESD and UL approved


BCP battery clutchscrewdrivers

• From 0.8 to 12 Nm

• Ergonomic pistol-grip design

• 7 brushless models offering variable speed with a speed setting unit

• Choice of two 18 V Li-Ion batteries:

1.3 Ah Flat Pack or 2.6 Ah Big Pack

• Light in front to illuminate work piece

• Torque OK/NOK light with optional buzzer

• Battery can be mounted in two directions

• Low noise level

For technical data, see pages 30

Assembly needs:

You need precision fastening, cycle after cycle.

Torque must be accurate and consistent.

Atlas Copco screwdriver solutions:

LUM, LTV, EBL and BCP.

ESD certification guarantees against damage of electronic com-ponents by an uncontrolled electrostatic discharge (ESD) from the tools. In practice it certifies that at no point will the material of the equipment hold an electrostatic potential above 100 V for more than 2 seconds.


LEVEL 1 – TORQUE cONTROL


EBL screwdrivers had the function-ality we needed when we built our new LCD assembly lines. Durability, quiet operation and batch count capabilities – in combination with line control – made the screwdriver the ideal choice, making sure we never miss a screw.

Mr Marek Blaha, LCD Production Division General Manager, Sony Slovakia.


...4 Batch OK

...3...

...2...

1...

LEVEL 2 – BATcH cOUNT

Functionality level 2g Batch count + Torque control

Eliminate the problem of missing screws with batch count functionality. Complex fasten-ing regimes with multiple screws and high-speed production can lead to missed screws and compromised quality.

Screw counting

counting?

Eliminate the problem straight out of the box with theAtlas Copco EBL advanced electric brushless screwdriver.

Get it right the first time round with batch count and line control functionality.

Problem: On fast moving assembly lines, operators can miss screws.Solution: Screw counting capability with operator feedback signal.

Problem: Operator needs to paint every screw in order to check each one is fastened.Solution: Screw counting function and line control capability. When all the screws are in place, the screwdriver sends a signal to the line and next batch arrives.

Does your production process require screw


RE Drive

• Batch count functionality

• Tightening cycle time programming

• I/O digital signals for line control

EBL – advanced electric brushless screwdriver

• From 0.05 to 4.5 Nm

• Rapid shut-off

• Brushless motor – longer lifespan

• Low noise levels

• Unique non-tamper torque setting


• Vacuum pick-up accessories

• Soft stop versions

• Reporting models

• ESD and UL approved


Assembly needs:

You need precision fastening, cycle after cycle. Torque must be accurate and consistent. You also need batch count functionality.

Atlas Copco screwdriver solution:

EBL – advanced electric brushless screwdriver.


1 2 AT L A S C O P C O S C R E W D R I V E R S

LEVEL 2 – BATcH cOUNT


We need to identify that operators correctly install the screws in one of our critical products. The Micro-Torque’s angle control functional-ity is amazingly precise and has helped us to reduce scrapped parts. Additionally, the robust design of the screwdriver makes it the most durable we have ever had.

Mr Sam ZhaoEquipment MaintenanceManager Schneider Electric, China.


LEVEL 3 – JOINT cONTROL

Functionality level 3g Joint control + Batch count + Torque control

Complex assembly, requiring multiple torque settings within the same cycle sequence, can be time consuming to execute correctly.

Do it automatically with level 3 functionality – torque set-tings change sequentially, eliminating operator errors – while process control detects cross-threaded joints and angle control eliminates assembly errors.

Problem:Cross-threading of joints.Solution:Detection of cross-threading by controlling the torque level during the rundown stage of the tightening cycle.

Problem:Stripped screw in sensitive plastics.Solution: Programmable speed in the second stage of the tightening.

Problem:Wrong screw in the wrong place.Solution: By programming the angle according to the screw length the system detects if the screw is installed in the right place, and gives opera tor feedback.

Problem:Several tools required for different types of joint.Solution: Use one tool that can be programmed to handle different torque settings.


MicroTorque ETD M-ABL Ergo electric screwdrivers

• From 0.1 to 0.8 Nm


• Prepared for vacuum pick-up

• Angle encoder


Assembly needs:

You need precision fastening, cycle after cycle. Torque must be accurate and consistent, batch count and securing the joint are also essential.


Tensor DL and MicroTorque TM.

MicroTorque ETD M 27 ABL electric screwdrivers

• From 0.075 to 0.27 Nm

• Prepared for vacuum pick-up

• Angle encoder

MicroTorque controller

• One to eight tightening steps

• Up to 32 parameter sets

• Line control

• LED display

• Configurable display

• Compact controller

• Up to 10 tightening sequences



Tensor DL electric screwdriver



• Ergonomics design

• Signal lights

• Front lights

• ESD approved

Tensor DL advanced controller


• Tool service indicator

• LED display

• Line control

• Autoset

For technical data, see page 32


LEVEL 3 – JOINT cONTROL


In order to maintain our competitive-ness and achieve better assembly quality, we installed four fixtured Micro Torque screwdrivers. Working as multiple spindles within one auto-mated assembly station, we signifi-cantly increased productivity and by detecting common assembly prob-lems, we now have documentable process control.

Mr Luis Marques, Manufacturing Engineer, Visteon Portugal.


Functionality level 4g Critical fastening + Joint control + Batch count + Torque control

For the most demanding fastening scenarios, the Atlas Copco screwdriver range offers tools for performing safety and mission-critical assembly.

LEVEL 4 – cRITIcAL FASTENING

Capable of handling multiple parameter sets sequentially, producing detailed information for tightening analysis and allowing full traceability, these transducerized tools repre-sent state-of-the-art control and precision.

Problem: Operator has to use a click wrench after tightening to check fastening is correct.Solution: Using a high-accuracy screwdriver eliminates the need to use a click wrench.

Problem: The assembly of safety-critical components needs to be operator independant.Solution: Transducerized screwdrivers deliver the highest level of accuracy and allow comprehensive data collection.

Problem: Assembling safety-critical or delicate plastic components requires the highest level of tightening accuracy.Solution: Choose an Atlas Copco transducerized screwdriver – the only type of screwdriver that can perform repeated fastening with industry- leading accuracy.

Problem: Need to increase cycle rate – automation.Solution: Use fixtured tools, controllers equipped with I/O bus and network integration.


MicroTorque ETF MT electric screwdriver


• Fixtured screwdriver

• Built-in angle encoder

• Longer durability

MicroTorque controller

• One to eight tightening steps


• Line control

• LED display

• Configurable display

• Compact controller

• Up to 10 tightening sequences

For technical data, see page 35 – 37

Tensor SL electric screwdriver



• Ergonomic design

• Signal lights and buzzer

• Front lights

• ESD approved

Tensor SL controller


• Tightening status storage: 5000

• Up to 99 jobs

• Cell programming

• Logic configurator

• Graph model with color display

For technical data, see page 33 – 34

Assembly needs:

You need precision fastening, cycle after cycle. Torque must be accurate and consistent, batch count and securing the joint are also essential. In addition you need to ensure critical fastening.


Tensor SL and MicroTorqueTM ETF MT.



LEVEL 4 – cRITIcAL FASTENING


Visualization of the assembly se-quence makes work much easier, pre-vents production errors and improves product quality. We like using Atlas Copco electric screwdrivers. With Tensor tools we are always in full control of the tightening processes.

Mr Gerhard Visser, Manager, Pilot Production, Lenze Drive Systems GmbH, Aerzen, Germany


Functionality level 5g Zero fault fastening

Zero fault fastening is now easily achievable thanks to Atlas Copco’s ToolsNet software. Centralized trend monitoring of production line data allows problem areas to be identified and processes to be streamlined.

ToolsTalk MT Net

Data collection software for the MT screwdriver range.

LEVEL 5 – ZERO FAULT FASTENING

Real-time data collection and analysis allows adjust-ments to be made directly to the production process. The system allows full traceability and auditing, allowing compliance with the most challenging quality control pro-grammes.

Take full control with ToolsNet

• Collect data for process improvement• Access historical data and statistics • Historical and real-time data presentation• Full process traceability

Traceability minimizes recall costs

Data can be presented historically or in real-time and shift reports are easily generated to satisfy production managers.

In the event of warranty recalls, the result database provides access to critical information which can easily minimize the extent of any recall leading to an overnight payback on your investment.

ToolsNet PF W10

Data collection software for the Tensor SL screwdriver.


LUM Pneumatic Screwdrivers Pistol grip shut-off models

Pistol grip Balanced pistol grip Multiple air inlet

Model

TorquerangeSoftjoint Free

speedr/min

Airconsumptionat

freespeed WeightLength

mm

Airinlet

threadin

Distancecentretoside

mm OrderingNo.Nminlb l/scfm kgIb

Pistolgripmodelswithtriggerstart

LUM22 HR3 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 18 8431 0269 00

LUM22 HR3-RE 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 18 8431 0278 63

LUM22 HR4 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 18 8431 0269 02

LUM22 HR4-RE 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 18 8431 0278 65

LUM22 HR6 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 18 8431 0269 01

LUM22 HR6-RE 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 18 8431 0278 64

Pistolgripmodelswithtriggerandpushstart

LUM22 HR3-P 0.6 - 3 5.3 - 26.5 2200 7.5 16 0.85 1.9 186 1/4 21 8431 0269 06

LUM22 HR4-P 0.6 - 4 5.3 - 35.4 1650 7.5 16 0.85 1.9 186 1/4 21 8431 0269 08

LUM22 HR6-P 1.5 - 6.5 13.3 - 57.5 1150 7.5 16 0.85 1.9 186 1/4 21 8431 0269 07

LUM22 HR10-P 3.5 - 10 31 - 88.5 750 7.5 16 1 2.2 218 1/4 21 8431 0269 09

Balancedpistolgripmodelswithtriggerstart

LUM12 HRX1 0.6 - 1.8 5.3 - 15.9 2300 6 13 0.65 1.4 176 1/8 15 8431 0278 58

LUM12 HRX1-RE 0.6 - 1.8 5.3 - 15.9 2300 6 13 0.65 1.4 176 1/8 16 8431 0278 59

LUM12 HRX2 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 176 1/8 16 8431 0278 56

LUM12 HRX2-RE 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 176 1/8 16 8431 0278 57

LUM12 HRX3 0.4 - 3.5 5.3 - 31.9 1150 6 13 0.7 1.5 186 1/8 16 8431 0278 54

LUM12 HRX3-RE 0.4 - 3.5 3.5 - 31.9 1150 6 13 0.7 1.5 186 1/8 16 8431 0278 55

LUM12 HRX5 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 186 1/8 16 8431 0278 51

LUM12 HRX5-RE 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 186 1/8 16 8431 0278 53

LUM12 HRX5-170 0.4 - 5 3.5 - 44.2 170 6 13 0.7 1.5 196 1/8 16 8431 0278 47

LUM12 HRX5-350 0.4 - 5 3.5 - 44.2 350 6 13 0.7 1.5 186 1/8 16 8431 0278 48

LUM12 HRX5-350-RE 0.4 - 5 3.5 - 44.2 350 6 13 0.7 1.5 186 1/8 16 8431 0278 49

LUM12 HRX8 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 186 1/8 16 8431 0278 60

LUM12 HRX8-RE 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 186 1/8 16 8431 0278 61

LUM12 HRX8-50 1.5 - 8 13.3 - 70.8 50 6 13 0.7 1.5 196 1/8 16 8431 0280 25

LUM12 HRX8-110 1.5 - 8 13.3 - 70.8 110 6 13 0.7 1.5 196 1/8 16 8431 0280 27

LUM22 HRX2 1.2 - 2a 10.6 - 17.7 4500 9 19 0.9 2 187 1/4 18 8431 0269 29

LUM22 HRX2-3200 1.1 - 2.6a 9.7 - 23 3200 9 19 0,9 2 187 1/4 18 8431 0278 85

LUM22 HRX3 0.6 - 3a 5.3 - 26.5 2250 9 19 0.9 2 187 1/4 18 8431 0269 22

LUM22 HRX3-RE 0.6 - 3a 5.3 - 26.5 2250 9 19 0.9 2 187 1/4 18 8431 0278 70

LUM22 HRX4 0.6 - 4a 5.3 - 35.4 1650 9 19 0.9 2 187 1/4 18 8431 0269 20

LUM22 HRX6 1.5 - 6.5a 13.3 - 57.5 1100 9 19 0.95 2.1 197 1/4 18 8431 0269 21

LUM22 HRX6-RE 1.5 - 6.5a 13.3 - 57.5 1100 9 19 0.95 2.1 197 1/4 18 8431 0278 71

Balancedgripmodelswithtriggerstartandsoftstopfunction

LUM10 HRX1-SS 0.2 - 0.6 1.8 - 5.3 800 6 13 0.65 1.4 176 1/8 16 8431 0280 02

LUM12 HRX1-SS 0.6 - 1.3 5.3 - 11.5 800 6 13 0.65 1.5 176 1/8 16 8431 0280 01

Multipleairinletmodelsandair-on-topmodelswithtriggerstart

LUM12 HRF2 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.65 1.4 190 1/8 16 8431 0269 31

LUM12 HRF3 0.4 - 3.6 3.5 - 31.9 1150 6 13 0.7 1.5 200 1/8 16 8431 0269 32

LUM12 HRF5 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 200 1/8 16 8431 0269 33

LUM12 HRF8 1.5 - 8 13.3 - 70.8 500 6 13 0.7 1.5 200 1/8 16 8431 0269 34a 1.4 - 4 Nm with spring, Ordering No. 4210 1831 00. Recommended hose size mm: LUM10/12/21 = 6, LUM22/25 = 8, LUM22 HR/HRX10 = 10

All models: Are reversible and have quick change chuck. All data at an air pressure of 6.3 bar. For operator comfort support handle recommended for high torque, see Optional Accessories.


LUM Pneumatic ScrewdriversStraight shut-off models

Straight models with push start Straight models with lever start

Model


speedr/min

Airconsumptionat


mm

Airinlet

threadin

Distancecentretoside

mmDrivetype OrderingNo.Nminlb l/scfm kgIb

Straightmodelswithpushstartandbuttonreverse

LUM 02 PR04-1800 0.03 - 0.32 0.027 - 0.29 1800 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 02

LUM 02 PR04-1200 0.03 - 0.32 0.027 - 0.29 1200 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 04

LUM 02 PR07-500 0.025 - 0.6 0.023 - 0.54 500 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 06

LUM 02 PR07-350 0.025 - 0.6 0.023 - 0.54 350 2.2 4.7 0.16 0.35 165 * 10 4 mm HM 8431 0146 08

LUM 02 PR04-1800-Q 0.03 - 0.32 0.027 - 0.29 1800 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 12

LUM 02 PR04-1200-Q 0.03 - 0.32 0.027 - 0.29 1200 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 14

LUM 02 PR07-500-Q 0.025 - 0.6 0.023 - 0.54 500 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 16

LUM 02 PR07-350-Q 0.025 - 0.6 0.023 - 0.54 350 2.2 4.7 0.16 0.35 165 * 10 3 mm Hex 8431 0146 18

LUM10 PR03 0.1 - 1.5 0.8 - 13 300 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0146 05

LUM10 PR05 0.1 - 1.5 0.8 - 13 460 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0146 09

LUM10 PR12 0.1 - 1.1 0.8 - 10 1200 3 6 0.4 0.9 196 1/8 15 1/4 Hex 8431 0146 17

LUM10 PR21 0.1 - 0.7 0.8 - 6 2000 3 6 0.4 0.9 196 1/8 15 1/4 Hex 8431 0146 25

LUM12 PR1 0.6 - 1.6 5.3 - 14.2 1900 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 29

LUM12 PR2 0.4 - 2.3 3.5 - 20.4 1450 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 27

LUM12 PR3 0.4 - 3.2 3.5 - 28.3 1000 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 26

LUM12 PR4 0.4 - 4.2 3.5 - 37.2 750 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 25

LUM12 PR5 0.4 - 5 3.5 - 44.2 450 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0278 30

LUM22 PR2-3500 1.1 - 2.5 9.7 - 22.1 3500 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0278 89

LUM22 PR3 0.6 - 3.2 5.3 - 28.3 2100 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 61

LUM22 PR4 0.5 - 4.0 4.4 - 35.4 1600 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 55

LUM22 PR4-2300 0.7 - 4.5 5.9 - 38.2 2300 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0278 81

LUM22 PR5-350 0.4 - 5.0 3.5 - 44.2 350 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 60

LUM22 PR6 1.5 - 6.0 13.3 - 53.1 1000 7 15 0.75 1.7 211 1/4 15 1/4 Hex 8431 0269 56

LUM22 PR8-1100 1.5 - 8.0 13.3 - 70.8 1100 7 15 0.9 2.0 224 1/4 15 1/4 Hex 8431 0278 88

Straightmodelswithpushstart,buttonreverseandsoftstopfunction

LUM10 PR1-SS 0.2 - 0.6 1.8 - 5.3 460 3 6 0.4 0.9 206 1/8 15 1/4 Hex 8431 0280 06

LUM12 PR1-SS 0.6 - 1.3 5.3 - 11.5 800 4.5 10 0.55 1.2 195 1/8 15 1/4 Hex 8431 0280 05

Straightmodelswithleverstartandwithoutpushstart

LUM12 SR1 0.6 - 1.8 5.3 - 15.9 2200 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 35

LUM12 SR2 0.5 - 2.5 4.4 - 22.1 1700 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 34

LUM12 SR3 0.4 - 3.5 3.5 - 31 1200 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 33

LUM12 SR4 0.4 - 4.5 3.5 - 39.8 850 6 13 0.6 1.3 217 1/8 15 1/4 Hex 8431 0278 32

LUM22 SR3 0.6 - 3.2 5.3 - 28.3 1950 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 44

LUM22 SR4 0.6 - 4 5.3 - 35.4 1500 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 46

LUM22 SR5-300 0.4 - 5 3.5 - 44.2 300 7 15 0.8 1.8 239 1/4 16 1/4 Hex 8431 0269 51

LUM22 SR6 1.5 - 6 13.3 - 53.1 1000 7 15 0.85 1.9 239 1/4 16 1/4 Hex 8431 0269 47

TEcHNIcAL DATA / AccESSORIES

a Front end 12.5 mm (4210 3918 01) included.b Optional front end 21 mm (4210 3918 02).

Recommended hose size mm: LUM10/12/21 = 6, LUM22 = 8, LUM37 = 10

ESD approved: LUM 10/21/12/22 SR/PR

All models are reversible and have quick change chuck.

SR-models have ring reverse control.

PR-models have push button reverse.b Air inlet thread M5. Nipple and coupling included accessory for all LUM 02 models, hose size diameter 6 mm.


Model


speedr/min

Airconsumptionat


mm

Airinlet

threadin

Angleheadcentretoside

mm

Anglehead

heightmm OrderingNo.Nminlb l/scfm kgIb

Shut-offanglemodels

LTV009 R025-Q 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 00

LTV009 R025-42 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 01

LTV009 R025-6 0.6 - 2.5 5.3 - 22.1 1650 6 13 0.7 1.5 266 1/8 9 25 8431 0278 02

LTV009 R03-10 0.7 - 3 6.2 - 26.5 1400 6 13 0.7 1.5 266 1/8 9 25 8431 0278 23

LTV009 R035-Q 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 03

LTV009 R035-42 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 04

LTV009 R035-6 0.4 - 3.5 3.5 - 31 1100 6 13 0.7 1.5 266 1/8 9 25 8431 0278 05

LTV009 R05-Q 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 06

LTV009 R05-42 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 07

LTV009 R05-6 0.4 - 5 3.5 - 44.2 850 6 13 0.7 1.5 266 1/8 9 25 8431 0278 08

LTV009 R07-Q 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 9 25 8431 0278 09

LTV009 R07-42 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 9 25 8431 0278 10

LTV009 R07-6 1.1 - 7 9.7 - 61.9 500 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 11

LTV009 R08-6-200 1.3 - 9 11.5 - 79.6 200 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 24

LTV009 R09-Q 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 12

LTV009 R09-10 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 13

LTV009 R09-42 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 15

LTV009 R09-42M 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 16

LTV009 R09-6 1.3 - 9 11.5 - 79.6 430 6 13 0.7 1.5 266 1/8 11 28.5 8431 0278 17

LTV009 R11-Q 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 19

LTV009 R11-10 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 20

LTV009 R11-42 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 21

LTV009 R11-6 1.3 - 11 11.5 - 97.3 320 6 13 0.8 1.8 266 1/8 11 28.5 8431 0278 22

ESD approved: LTV 009. Recommended hose size mm: LTV009 = 6

All LTV 009 models are ESD approved

All models: Are reversible.

- 42 = 1/4” female hexagon drive for bits.

- 10 = 3/8” square drive.

- 6 = 1/4” square drive for sockets.

- Q = 1/4” quick change chuck.

LTV Pneumatic ScrewdriversAngle head models

Angle head


Accessories – LUM/LTV

Clutch adjustment key

Included with all shut-off and slip clutch tools.

Quick change chuck

Included with all straight and pistol grip tools.

Accessories included

Designation Exhausthose Supporthandle ESDhoseTorquearms

adaptersInstallation

proposalESDapprovedpistolhandle

LUM12 HRX/HRF 4210 2052 00 4110 1355 92 8202 0501 06 – 8202 1180 67 4210 3616 04

LUM22 HR 3, 4, 6 4210 2052 00 4110 1355 92 8202 0501 10 – 8202 1180 77 4210 4337 04

LUM22 HR 10, 12 4210 2052 00 4110 1355 93 8202 0501 10 – 8202 1180 77 4210 4337 04

LUM22 HRX 3, 4, 6 4210 2052 00 4110 1355 92 8202 0501 10 – 8202 1180 77 4210 3616 04

LUM12 SR 4210 2052 00 – 8202 0501 06 4390 1735 52 8202 1180 67 –

LUM12 PR 4210 2052 00 – 8202 0501 06 4390 1735 53 8202 1180 67 –

LUM22 SR 4210 2053 00 – 8202 0501 10 4390 1735 51 8202 1180 77 –

LUM22 PR 4210 2053 00 – 8202 0501 10 4390 1735 54 8202 1180 77 –

LTV009 4210 2052 00 – 8202 0501 06 – 8202 1180 67 –

Service kits

Model OrderingNo.

LUM12 HRX, HRF 4081 0247 90

LUM22 HR/HRX 3, 4, 6, 12 4081 0281 90

LUM22 HR/HRX 10 4081 0282 90

LUM12 SR 4081 0254 90

LUM12 PR 4081 0250 90

LUM22 PR/SR 3, 4, 6, 12 4081 0284 90

LUM22 PR/SR 10 4081 0285 90

LUM10 PR 4081 0070 90

LTV009 4081 0248 90

RE-Conversion kits for LUM/LTV models

Model OrderingNo.

LUM12 HRF 4210 3624 99

LUM12 SR 4210 4137 90

LUM22 SR 4210 2057 80

LTV009 4210 4137 90


Optional accessoriesModel OrderingNo.

Threadedclutchhouses

LUM12 PR/SR 1, 2, 3, 4 4210 4386 04

LUM12 HRX/HRF 1, 3, 5, 8 4210 4386 04

LUM22 HRX/HR 2, 3, 4, 6 4210 4386 04

LUM22 HRX/HR 10, 12 4210 4392 03

LUM22 SR/PR 3, 4, 5, 6 4210 4383 04

LUM22 SR/PR 10, 12 4210 4383 03

VacuumscrewpickupLUM02 4210 4706 80

Angleheadcovers

LTV009 R025-R07 4210 4115 00

LTV009 R08-R11 4210 4116 00

Protectivecovers

LUM22 HR 4210 3150 00

LUM22 HRX 4210 3151 00

LUM12 HRX 4210 3152 00

SuspensionyokeforLTV009 4210 4461 80

Quickchangechuckkit,extrawidediameterforeasyhandling 4210 2326 91

Angle-headforLTV009,90°hexdrivemagneticbitholder* 4210 3857 91

* Substitute for 4210 3857 XX angle heads.

Suspension yoke Quick change chuck kit Angle-head for LTV009 Vacuum screw pick-up

Exhaust hose

Included with straight and air-on-top models.

Hose nipple

Included with all tools.


EBL Screwdrivers

EBL screwdriver

Type Model

TorqueSpeedr/min

WeightLength

mmBit

drive OrderingNo. DrivetobeusedNcmInIb kgIb

STANDARD

EBL03 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 Wing type 4mm 8431 0170 02

EBL Drive

EBL Drive Plus

EBL RE Drive

ST controller+ EBL Drive

EBL03-Q 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 1/4" Hex 8431 0170 04EBL12 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 11EBL12-1500 0.2 - 1.2 1.8 - 10.6 1500 0.5 1.1 215 1/4" Hex 8431 0170 41EBL20 0.5 - 2.0 4.5 - 18 750 0.5 1.1 215 1/4" Hex 8431 0170 16EBL21-1500 0.5 - 2.1 4.5 - 19 1500 0.8 1.8 235 1/4" Hex 8431 0170 43EBL25 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 23EBL35 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 33EBL25-1500 a 1.0 - 2.5 8.8 - 22.1 1500 0.8 1.8 235 1/4" Hex 8431 0170 25EBL45 a 1.0 - 4.5 8.8 - 39.8 700 0.8 1.8 235 1/4" Hex 8431 0170 40

SOFT STOP

EBL03-SS 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 Wing type 4mm 8431 0170 07EBL12-SS 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 15EBL20-SS 0.5 - 2.0 4.5 - 18 750 0.5 1.1 215 1/4" Hex 8431 0170 20EBL25-SS 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 28EBL35-SS 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 38

REPORTING

EBL03-RE 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 Wing type 4mm 8431 0170 55EBL03-Q-RE 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 1/4" Hex 8431 0170 06EBL12-RE 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 13EBL12-1500-RE 0.2 - 1.2 1.8 - 10.6 1500 0.5 1.1 215 1/4" Hex 8431 0170 18EBL20-RE 0.5 - 2.0 4.5 - 18 750 0.5 1.1 215 1/4" Hex 8431 0170 19EBL21-1500-RE 0.5 - 2.1 4.5 - 19 1500 0.8 1.8 235 1/4" Hex 8431 0170 47EBL25-RE 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 26EBL35-RE 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 36

SOFT STOPREPORTING

EBL03-SS-RE 0.05 - 0.3 0.4 - 2.7 870 0.3 0.7 185 Wing type 4mm 8431 0170 08EBL12-SS-RE 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 17EBL20-SS-RE 0.5 - 2.0 4.5 - 18 750 0.5 1.1 215 1/4" Hex 8431 0170 21EBL25-SS-RE 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 29EBL35-SS-RE 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 39

SOFT START

EBL12 ST 0.2 - 1.2 1.8 - 10.6 910 0.5 1.1 215 1/4" Hex 8431 0170 14EBL25 ST 1.0 - 2.5 8.8 - 22.1 930 0.8 1.8 235 1/4" Hex 8431 0170 24EBL35 ST 1.0 - 3.5 8.8 - 31 700 0.8 1.8 235 1/4" Hex 8431 0170 37

a EBL 45 and EBL 25-1500 to be used with EBL Drive Plus.

- All tool models, drives and cables are ESD and UL certified.

- Tool box include cable for drive connection (standard models with 5 pins cable and reporting models with 6 pins cable).


Shaker tray

Consists of a rubber box. A variety of interchangeable rubber grid plates should be ordered separately. (see table below)

Accessories – EBL

Vaccum pick-up adapterNozzle blank

Grid plate

ISO standard connectors

To build your own 22 V AC network. With our components and an ordinary two core cable, min 1.5 mm2, you can quickly arrange the electric supply for a series of screw-drivers.

Screw pick-up system

Picking and positioning of screws are many times crucial for productivity in small screw assembly. The optional equipment offers a vacuum pick-up system to simplify pre-tightening preparations. The system consists of a vacuum pump, adapters for the screwdriver a shaker tray and grids for different screw dimensions.

Nozzle blanks

They must be machined to fit the specific screw to be picked up.

Vacuum pick-up adapters

Screwdrivers can be equipped with vacuum pick-up adapt-ers ready to connect to a vacuum pump. The adapters are delivered without nozzles.

Pistol grip handle(ESD approved)

Service kits

Angle head

EBL screwdriver models EBL 25 and 35 can be equipped with a 90° angle head for access in cramped quarters.

Model OrderingNo.

Vacuum pump – 220V 4220 0062 00

Vacuum pump – 115V 4220 0062 05

Vacuum pick-up adapter for EBL 03 4220 0080 30

Vacuum pick-up adapter for EBL 12/20 4220 0080 31

Vacuum pick-up adapter for EBL 21/25/35 4220 0080 33

Nozzle blank Ø 7.5 mm for EBL 03 4220 0067 03

Nozzle blank Ø 8 mm for EBL 12/20/21/25/35 4220 0070 03

Nozzle blank Ø 14 mm for EBL 12/20/21/25/35 4220 0072 03

Cable optionsModel OrderingNo.

Cable(notESDapproved)

Spiral cable, 1.3 m (5 pin) 4220 0347 00

Spiral cable, 1.3 m (6 pin) 4220 0349 00

Heavy duty, cable 2.0 m (5 pin) 4216 0132 00

Heavy duty, cable 2.0 m (6 pin) 4216 0133 00

Cable(ESDapproved)

Extension cableb 3.0 m (5 pin) 4220 0138 01

Extension cableb 3.0 m (6 pin) 4216 0115 00

b Maximum total length 8 m.

Model OrderingNo.

Male plug 4220 0095 00

2-way female socket. For wall mounting (not ESD approved) 4220 0096 00

Model OrderingNo.

EBL 21, 25, 35 4220 0051 05

EBL 12, 20 4220 0051 04

Model OrderingNo.

EBL 4216 6 0049 90Model OrderingNo.

Shaker tray 4220 0054 00

Forscrewsize,mm OrderingNo.

1.2/1.4 4220 0055 00

1.7 4220 0056 00

2.0 4220 0057 00

2.3 4220 0058 00

2.6 4220 0059 00

3.0 4220 0060 00

4.0 4220 0061 00

Model OrderingNo.

EBL screwdriver 4220 0081 02

Square drive 1/4” (06) 4210 4033 80

Hex bit drive 1/4” (42) 4210 4033 81

Hex quick change 1/4” (Q) 4210 4033 82

Adaptera (ESD approved) 4210 4609 80

Pistol grip handle

Angle head adapter

a Need to be ordered separately.


Vacuum pump


Accessories – BCP Battery Clutch Screwdrivers

Suspension yokeBattery cover

18 V, 2.6 Ah.

Battery cover

18 V, 1.3 Ah.

Battery

18 V, 2.6 Ah.Battery

18 V, 1.3 Ah.

Battery charger

18 V.

Support handle Colour ringsTool cover

Speed setting unit

BCP – Battery Clutch Screwdrivers

BatteryCurrent

VElectriccharge

Ah

WeightChargetime

min OrderingNo.kg Ib

Li-Ion flat pack 18 1.3 0.37 0.81 35 4211 5426 82

Li-Ion big pack 18 2.6 0.63 1.39 70 4211 5426 83

ChargerInputV/Hz

OutputV/A

Weight

OrderingNo.kg Ib

EU-contact 230V / 50Hz 18V / 1.8A 0.61 1.34 4211 5428 80

UK-contact 230V / 50Hz 18V / 1.8A 0.61 1.34 4211 5428 81

US-contact 120V / 60Hz 18V / 1.8A 0.61 1.34 4211 5428 84

Miscellaneous OrderingNo.

Speed setting unit 4211 5462 80

Support handle 4211 5421 80

Tool cover protection 4211 5415 00

Battery cover protection flat pack 4211 5601 00

Battery cover protection big pack 4211 5602 00

Suspension bail 4211 5600 00

colour ring – red 4211 5461 02

colour ring – orange 4211 5461 03

colour ring – green 4211 5461 04

colour ring – blue 4211 5461 05

colour ring – white 4211 5461 06

colour ring – purple 4211 5461 07

colour ring – grey 4211 5461 08

ModelSquaredrive

in

Torquerange TorqueftIbSpeedr/min

Weight(excl.battery)Length/Height

mm OrderingNo.Nm ftlb Min Max kg Ib

BCP–shut-offbrushlesstoolswithvariablespeed

BcP BL2-I06 1/4 0.8 2.5 0.6 1.8 500 - 1550 0.86 1.89 200/188 8431 1273 00

BcP BL6-I06 1/4 2.0 6.0 1.5 4.4 300 - 1000 0.86 1.89 200/188 8431 1273 10

BcP BL8-I06 1/4 3.0 8.0 2.2 5.9 300 - 800 0.86 1.89 200/188 8431 1273 20

BcP BL12-I06 1/4 5.0 12.0 3.7 8.8 300 - 600 0.86 1.89 200/188 8431 1273 30

BcP BL-12L-I06 1/4 3.0 12.0 2.2 8.8 150 - 440 0.86 1.89 200/188 8431 1273 40

BcP BL-2L-I06 1/4 0.8 2.5 0.6 1.8 150 - 440 0.86 1.89 200/188 8431 1273 50

BcP BL-6L-I06 1/4 1.5 6.0 1.5 4.4 150 - 440 0.86 1.89 200/188 8431 1273 60The tools are set at maximum speed at delivery.



Tensor DL Screwdrivers

Straight tool Angle head tool Pistol grip tool

Model

TorquerangeSpeedr/min

WeightLength

mmCSdistance

mm OrderingNo.Nm inIb kg Ib

Straighttoolswithleverstart

ETD DL21-04-I06 1 - 4 8.8 - 35.4 1 600 0.6 1.3 235 18 / 19.5 8433 4014 25

ETD DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 235 18 / 19.5 8433 4017 31

ETD DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 235 18 / 19.5 8433 4019 10

Push-to-startandfrontlights

ETD DL21-01-I06-PS 0.3 - 1.2 2.6 - 10 2 200 0.6 1.3 243 18 / 19.5 8433 4010 89

ETD DL21-04-I06-PS 1 - 4 8.8 - 35.4 1 600 0.6 1.3 242 18 / 19.5 8433 4014 91

ETD DL21-07-I06-PS 2.2 - 7.5 19.5 - 66 970 0.6 1.3 242 18 / 19.5 8433 4017 69

ETD DL21-10-I06-PS 3 - 10 26.6 - 88.5 720 0.6 1.3 242 18 / 19.5 8433 4019 25

Angleheadtoolswithlever

ETV DL21-04-I06 1 - 4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 47

ETV DL21-04-I06-Qc 1 - 4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 73

ETV DL21-04-06 1 - 4 8.8 - 35.4 1 600 0.7 1.5 268 9 8433 4004 91

ETV DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 66

ETV DL21-07-I06-Qc 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 79

ETV DL21-07-06 2.2 - 7.5 19.5 - 66 970 0.7 1.5 268 9 8433 4007 94

ETV DL21-20-10 5 - 20 44.2 - 180 465 0,85 1,9 285 14 8433 4008 55

ETV DL21-20-B10 5 - 20 44.2 - 180 465 0,85 1,9 285 14 8433 4008 60

ETV DL21-10-I06 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 34

ETV DL21-10-I06-Qc 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 61

ETV DL21-10-06 3 - 12 26.6 - 106.2 610 0.7 1.5 281 11 8433 4009 77

Pistolgriptoolswithleverstart

ETP DL21-04-I06 1 - 4 8.8 - 35.4 1 600 0.6 1.3 235 20 8433 4024 19

ETP DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 235 20 8433 4027 26

ETP DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 235 20 8433 4029 13

Pistolgrip(push-to-startandfrontlights)

ETP DL21-01-I06-PS-H 0.3 - 1.2 2.6 - 10 2 200 0.6 1.3 243 20 8433 4020 77

ETP DL21-04-I06 1 - 4 8.8 - 35.4 1 600 0.6 1.3 242 20 8433 4024 66

ETP DL21-07-I06 2.2 - 7.5 19.5 - 66 970 0.6 1.3 242 20 8433 4027 53

ETP DL21-10-I06 3 - 10 26.6 - 88.5 720 0.6 1.3 242 20 8433 4029 28

ETV = CS distance over angle head.

Tensor DL Drive – the brain of the system

The DL Drive powers the screwdriver, controls the tightening process, monitors the assembly process and guides the operator to ensure the task is performed “right first time”. The DL Drive communicates easily with external sensors and PLCs for line control functionality, and is designed to interface with accessories such as bit selectors and audible and visible alarms.

DL Drive

Model OrderingNo.

DLDrive

D303-DL Basic 8433 4850 48

D313-DL Advanced 8433 4850 33


Carbon fibre torque arm

Pistol grip handdle

Quality Integrated Fastening accessories

Software

Bit selectors, 4 positions

RE-alarm I/O expansion box

DL Cable

ToolsTalk DS/DL software

Accessories – Tensor DL

DL spiral cable DL cable with 90° connector

Tensor DL pistol grip

Accessory cables

Model OrderingNo.

Tensor

Toolcable

3 m 4220 2604 03

5 m 4220 2604 05

10 m 4220 2604 10

15 m 4220 2604 15

Heavydutycable

3 m 4220 3265 03

5 m 4220 3265 05

10 m 4220 3265 10

15 m 4220 3265 15

Cableswith90°connector

3 m 4220 3705 03

5 m 4220 3705 05

10 m 4220 3705 10

15 m 4220 3705 15

Spiralcablestraight

5 m 4220 3240 05

Spiralcablewith90°connector

5 m 4220 3706 05

Extensioncable

3 m 4220 2795 03

5 m 4220 2795 05

10 m 4220 2795 10

ToolsTalkDS/DL OrderingNo.

Swedish 8092 1138 60

English 8092 1138 62

German 8092 1138 64

French 8092 1138 66

Spanish 8092 1138 68

Italian 8092 1138 70

a Only compatible with Bit selector.

Model OrderingNo.

Bit selector 8433 0612 08

Bit selector pad doublea 4222 0933 92

RE-Alarm 8433 0560 03

I/O expansion box 8433 0564 38

Model OrderingNo.

Pistol grip Tensor DL 4220 2743 90

Model Maxtorque Poleheightmm OrderingNo.

SM c10 - 2 Wall mount 10 753 8202 9001 00

SM c10 - 2 Wall mount 10 753 8202 9001 10

Model OrderingNo.

I/O bus cable 0.5 m 4222 0917 00

I/O bus cable 1 m 4222 0917 01

I/O bus cable 3 m 4222 0917 03

I/O bus cable 5 m 4222 0917 05

I/O bus cable 10 m 4222 0917 10

I/O bus cable 15 m 4222 0917 15

I/O Termination plug 4222 0443 00



Tensor SL Screwdrivers

Straight tool Angle head tool Pistol grip tool

Power Focus 4002 drive

RBU – hardware key

Bronze

Stand alone functionality:

• 64 parameter sets

• Autoset

• Batch count

Silver

All the functionality of the bronze plus:

• 250 parameter sets

• Integrated Ethernet

• Job functionality

• Multistage functionality

• Cell functionality

• SPC

• Fieldbus options

Model


WeightLength

mmCSdistancea

mm OrderingNo.Nm inIb kg Ib

Straighttoolpush-to-startandfrontlights

ETD SL21-01-I06-PS 0.3 - 1.2 2.7 - 10 3000 0.7 1.6 246 18/19.5 8433 2102 92

ETD SL21-04-I06-PS 0.8 - 4 7 - 35 1600 0.7 1.6 246 18/19.5 8433 2104 91

ETD SL21-07-I06-PS 1.5 - 7.5 13 - 66 970 0.7 1.6 246 18/19.5 8433 2107 69

ETD SL21-10-I06-PS 2.0 - 10 18 - 89 720 0.7 1.6 246 18/19.5 8433 2108 25

Angleheadleverstart

ETV SL21-04-I06 0.8 - 4 7 - 35 1600 0.75 1.7 264 9 8433 2004 47

ETV SL21-04-I06-Qc 0.8 - 4 8 - 35 1600 0.75 1.7 264 9 8433 2004 73

ETV SL21-04-06 0.8 - 4 9 - 35 1600 0.75 1.7 264 9 8433 2004 91

ETV SL21-07-I06 1.5 - 7.5 13 - 66 970 0.75 1.7 264 9 8433 2007 66

ETV SL21-07-I06-Qc 1.5 - 7.5 14 - 66 970 0.75 1.7 264 9 8433 2007 79

ETV SL21-07-06 1.5 - 7.5 15 - 66 970 0.75 1.7 264 9 8433 2007 94

ETV SL21-12-I06 2.5 - 12 22 - 106 610 0.8 1.8 267 11 8433 2008 34

ETV SL21-12-I06-Qc 2.5 - 12 23 - 106 610 0.8 1.8 267 11 8433 2008 61

ETV SL21-12-06 2.5 - 12 24 - 106 610 0.8 1.8 267 11 8433 2008 77

Pistolgrippush-to-start

ETP SL21-01-I06-PS 0.3 - 1.2 2.7 - 10 3000 0.85 1.9 246 20.5 8433 2201 16

ETP SL21-04-PS 0.8 - 4 7 - 35 1600 0.85 1.9 246 20.5 8433 2204 66

ETP SL21-07-PS 1.5 -7.5 13 - 66 970 0.85 1.9 246 20.5 8433 2207 53

ETP SL21-10-PS 2 - 10 18 - 89 720 0.85 1.9 246 20.5 8433 2208 28a) ETD = CS distance without / with handle.

All models have quick change chuck and 1/4” female hex drive for bits.

ETV = CS distance over angle head.

Model OrderingNo.

PF 4002 G-HW 8433 3100 00

PF 4002 c-HW 8433 3100 05

PF 4002 G-DN-HW 8433 3140 00

PF 4002 c-DN-HW 8433 3140 05

PF 4002 G-PB-HW 8433 3142 00

PF 4002 c-PB-HW 8433 3142 20

PF 4002 G-IB-HW 8433 3145 00

PF 4002 c-IB-HW 8433 3145 05

PF 4002 G-MB-HW 8433 3147 00

PF 4002 c-MB-HW 8433 3147 05

PF 4002 G-EIP-HW 8433 3149 00

PF 4002 c-EIP-HW 8433 3149 05

PF 4002 G-PN-HW 8433 3148 00

PF 4002 c-PN-HW 8433 3148 05

Model OrderingNo.

RBU-Bronze 8433 0010 10

RBU-Silver 8433 0015 20

RBU-Gold 8433 0020 20

Gold

All the functionality of the silver plus:

• Advanced line control (Cell Job)

• Synchronisation in a cell


Cables

MaxiDisplay

Accessories – Tensor SL

SL Cable SL Cable with 90° connector

SL Spiral cable Stacklight

Model OrderingNo.

ToolCable

3 m 4220 3319 03

5 m 4220 3319 05

10 m 4220 3319 10

15 m 4220 3319 15

20 m 4220 3319 20

Heavydutycables

3 m 4220 3378 03

5 m 4220 3378 05

10 m 4220 3378 10

15 m 4220 3378 15

20 m 4220 3378 20

Cablewith90°connector

3 m 4220 3607 03

5 m 4220 3607 05

10 m 4220 3607 10

15 m 4220 3607 15

20 m 4220 3607 20

Spiralcablestraight

5 m 4220 3746 05

Spiralcablewith90°connector

5 m 4220 3617 05

Extensioncable

3 m 4220 2795 03

5 m 4220 2795 05

10 m 4220 2795 10

ToolsTalkPFW10 OrderingNo.

1-user license 8092 1190 01

5-user license 8092 1190 05

10-user license 8092 1190 10

Plant license 8092 1190 99

ToolsNet4000Reports OrderingNo.

05 Spindle License 8092 1410 05



Plant License 8092 1410 00

ToolsNet4000Alert OrderingNo.





ToolsNet4000History OrderingNo.





Quality Integrated fastening accessories

Model OrderingNo.

MaxiDisplay 19” including Operator Guidance Software 1 user License* 8435 3070 10

Operator Guidance Software 1 user License* 8092 1185 01

Stacklight ESL-04 standard 8433 0570 13

Accessory cables

Software

Model OrderingNo.

I/O bus cable 0.5 m 4222 0917 00

I/O bus cable 1 m 4222 0917 01

I/O bus cable 3 m 4222 0917 03

I/O bus cable 5 m 4222 0917 05

I/O bus cable 10 m 4222 0917 10

I/O bus cable 15 m 4222 0917 15

I/O Termination plug 4222 0443 00



MicroTorque

ETD M 80L ETD M 27 ABL ETD M 50 ABL ETF MT 100MicroTorqueTM controller

Model


Lengthmm

Overallwidthmm

WeightBit

drive OrderingNo.NcmInlb kglb

Fixturedtransducerized

ETF MT 5 0.5 - 5 0.04 - 0.4 600 184 20 0.4 0.90 HM 4 mm 8432 0800 10

ETF MT 10 1 - 10 0.09 - 0.9 600 184 20 0.4 0.90 HM 4 mm 8432 0800 11

ETF MT 20 2 - 20 0.18 - 1.8 800 184 20 0.4 0.90 HM 4 mm 8432 0800 12

ETF MT 50 5 - 50 0.44 - 4.4 1000 255 30 0.76 1.67 HM 4 mm 8432 0800 13

ETF MT 80 8 - 80 0.71 - 7.1 1200 274 30 1.18 2.60 HM 4 mm 8432 0800 14

ETF MT 100 10 - 100 0.88 - 8.8 1000 274 30 1.18 2.60 1/4” HEX 8432 0800 15

ETF MT 200 20 - 200 1.77 - 17.7 800 274 30 1.18 2.60 1/4” HEX 8432 0800 16

ETF MT 500 50 - 500 4.42 - 44.2 500 260 40 1.84 4.05 1/4” HEX 8432 0800 17

Hand-heldDigitork,withoutpush-to-start

ETD M 03 A 0.5 - 2.5 0.04 - 0.2 1000 132 16 0.1 0.22 Ø 2 mm 8432 0810 05

ETD M 05 A 1.5 - 5 0.13 - 0.4 750 132 16 0.1 0.22 Ø 2 mm 8432 0810 06

ETD M 10 A 3 - 10 0.27 - 0.9 750 132 16 0.1 0.22 Ø 2 mm 8432 0810 08

ETD M 20 AVB 5 - 20 0.44 - 1.8 750 146 22 0.25 0.55 HM 4 mm 8432 0810 34

ETD M 20 AcBS 5 - 20 0.44 - 1.8 750 162 22 0.25 0.55 HM 4 mm 8432 0810 31

ETD M 25 AVB 7.5 - 25 0.66 - 2.2 750 174 22 0.25 0.55 HM 4 mm 8432 0810 09

Hand-heldErgoDigitork,push-to-startconfigurable

ETD M 27 ABL 7.5 - 27 0.66 - 2.4 800 185.4 29 0.25 0.5 HM 4 mm 8432 0815 02

ETD M 40 ABL 10 - 40 0.71 - 3.6 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 05

ETD M 50 ABL 15 - 50 1.33 - 4.4 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 08

ETD M 80 ABL 16 - 80 1.42 - 7.1 850 225.4 36 0.52 1.1 HM 4 mm 8432 0815 11

Hand-heldDigitork,push-startconfigurable

ETD M 40 L 10 - 40 0.71 - 3.6 850 240 27 0.65 1.43 HM 4 mm 8432 0810 25

ETD M 50 L 15 - 50 1.33 - 4.4 850 220 27 0.65 1.43 HM 4 mm 8432 0810 10

ETD M 80 L 16 - 80 1.42 - 7.1 850 240 27 0.65 1.43 HM 4 mm 8432 0810 11

ETD M 100 L 25 - 100 2.21 - 8.8 700 240 27 0.65 1.43 1/4” HEX 8432 0810 12

ETD M 200 L 50 - 200 4.42 - 17.7 700 240 27 0.65 1.43 1/4” HEX 8432 0810 13

ETD M 250 L 75 - 250 6.62 - 23.5 600 240 27 0.65 1.43 1/4” HEX 8432 0810 24

FixturedDigitork

ETF M 05 1.5 - 5 0.13 - 0.4 800 184 20 0.4 0.90 HM 4 mm 8432 0810 15

ETF M 10 3 - 10 0.27 - 0.9 500 184 20 0.4 0.90 HM 4 mm 8432 0810 16

ETF M 20 5 - 20 0.44 - 1.8 650 184 20 0.4 0.90 HM 4 mm 8432 0810 17

ETF M 50 15 - 50 1.33 - 4.4 850 230 30 0.8 1.76 HM 4 mm 8432 0810 18

ETF M 80 16 - 80 1.42 - 7.1 850 272 30 1.2 2.64 HM 4 mm 8432 0810 19

ETF M 100 25 - 100 2.21 - 8.8 700 272 30 1.2 2.64 1/4” HEX 8432 0810 20

ETF M 200 50 - 200 4.42 - 17.7 600 272 30 1.2 2.64 1/4” HEX 8432 0810 21

ETF M 400 150 - 400 13.27 - 35.4 320 260 40 1.8 3.96 1/4” HEX 8432 0810 22

ETF M 800 300 - 800 26.55 - 70.8 300 322 45 2.6 5.73 1/4” HEX 8432 0810 23

Tool cableModel OrderingNo.

M - (AB)L tool - 2 m 8432 0830 37

MT/M/M-AXXX Tool - 2 m 8432 0830 36

M - (AB)L tool - 3.5 m 8432 0831 02

MT/M/M-AXXX Tool - 3.5 m 8432 0831 01

SoftwareModel OrderingNo.

Tools Talk MT Analysis (for graph analysis) 8432 0830 31

Tools Talk MT Analysis/Net (for graph analysis and data collection) 8432 0830 45

ETD M AXXX line: C - tool cable, V - integrated vacuum hose, B - reverse button, S - short lever, L - long lever.

NOTE: ”Complete system” (single ordering number) includes: Controller, screwdriver, tool cable, Tools Talk MT, USB communication cable and power supply.


Accessories – MicroTorque

Vacuum pumpVacuum adapter

Blank nozzles

Controller accessories

Model OrderingNo.

combi (Remote control + program selector) 8432 0830 88

Remote control 8432 0830 08

Digital program selector 8432 0830 34

Vacuum pump, VPX 3 8432 0830 05

Vacuum pump, VPX 6 8432 0830 06

controller fixture table 8432 0830 84

controller fixture wall 8432 0830 32

Footswitch 8432 0830 07

Desktop socket (with screwdriver presence sensor) 8432 0831 89

MT Stacklight table stand 8432 0830 97

MT Stacklight wall mount 8432 0830 99

Y cable for I/O connector* 8432 0831 99

* cable suitable when two I/O accessories are required.

Shaker tray

Model Slotmm OrderingNo.

SGQLargea(110x110x35mm)

SGQ 15 1.5 8432 0830 09

SGQ 20 2 8432 0830 10

SGQ 25 2.5 8432 0830 11

SGQ 30 3 8432 0830 12

SGQ 35 3.5 8432 0830 13

SGQ 40 4 8432 0830 14

SGQ 45 4.5 8432 0830 15

SGQ 50 5 8432 0830 16

SGQ 55 5.5 8432 0830 17

SGQ 60 6 8432 0830 18

MSGSmallb(70x70x15mm)

MSG 05 0.5 8432 0830 19

MSG 06 0.6 8432 0830 20

MSG 07 0.7 8432 0830 21

MSG 08 0.8 8432 0830 22

MSG 09 0.9 8432 0830 23

MSG 10 1.0 8432 0830 24

MSG 11 1.1 8432 0830 25

MSG 12 1.2 8432 0830 26

MSG 13 1.3 8432 0830 27

MSG 14 1.4 8432 0830 28

MSG 15 1.5 8432 0830 29

a SGQ type (big version): For screws up to 30 mm lenght.

From Ø 1.5 up to Ø 6 mm.b MSG type (small version): For screws up to 10 mm lenght.

From Ø 1.5 up to Ø 6 mm.

Vacuum adapters and nozzles

Model OrderingNo.

ETD 03-25 xVx ( 36-44 mm bit /nozzle Ø 6 mm) 8432 0770 02

ETD 20-25 AcBx (44 mm bit /nozzle Ø 6 mm) 8432 0770 08

ETD 20-25 AcBx (64 mm bit /nozzle Ø 6 mm) 8432 0770 10

ETD 40-80 L (44 mm bit / nozzle Ø 6 mm) 8432 0770 13

ETD 40-80 L (64 mm bit /nozzle Ø 6 mm) 8432 0770 15








ETF 5-80 (44 mm bit /nozzle Ø 6 mm) 8432 0770 33






Blank nozzle Ø 6 mm 8432 0760 02



Torque arm

Model OrderingNo.

GHP Mini 8432 0830 02

GHP Small 8432 0830 03

GHP Large 8432 0830 04

Model OrderingNo.

Handle between GHP Mini and ETF 05, 10, 20 8432 0830 90

Handle between GHP Small and ETF 50, 100, 200 8432 0830 53

Handle between GHP Large and ETF 400, 500, 800 8432 0830 54

Torque arm handles

GHP MiniGHP Small

Digital Program Selector Shaker trayRemote control

MT Stacklight table version

MT Stacklight for wall mounting

NOTE: The adapters and the handles are not included with the torque arm package, need to be ordered separately.

Torque arm adapters

Model OrderingNo.

Adapter between GHP Mini and ETF 5-20 8432 0830 70

Adapter between GHP Mini and ETD M 3-10 8432 0831 81

Adapter between GHP Mini and ETD M 20-25 AVB 8432 0830 83

Adapter between GHP Small and ETF 50-200 8432 0830 72

Adapter between GHP Small and ETD M-L 8432 0830 73

Adapter between GHP Large and ETF 400-800 8432 0830 74

Universal adapter for GHP Small (LUM, EBL, DL, SL) 8432 0831 80


MicroTorque Transducer

ACTA MT 4 Stationary transducer.

Joint kit

Model

CapacityOveralllength

mm Drive OrderingNo.Ncm InIb

Manualscrewdrivertorquetransducer

MT TH 1 1.0 0.09 115 Ø 3 mm 8432 0820 10

MT TH 2 2.0 0.18 115 Ø 3 mm 8432 0820 11

MT TH 5 5.0 0.44 115 Ø 3 mm 8432 0820 12

MT TH 10 10.0 0.88 115 Ø 3 mm 8432 0820 13

MT TH 20 20.0 1.77 115 1/4" 8432 0820 14

MT TH 50 50.0 4.42 124 1/4" 8432 0820 15

MT TH 100 100.0 8.85 124 1/4" 8432 0820 16

MT TH 200 200.0 17.70 124 1/4" 8432 0820 17

Staticreactiontorquetransducer

MT TS 1 1.0 0.09 81 Ø 3 mm 8432 0820 18

MT TS 2 2.0 0.18 81 Ø 3 mm 8432 0820 19

MT TS 5 5.0 0.44 81 Ø 3 mm 8432 0820 20

MT TS 10 10.0 0.88 81 Ø 3 mm 8432 0820 21

MT TS 20 20.0 1.77 81 Ø 3 mm 8432 0820 22

MT TS 50 50.0 4.42 98 1/4" 8432 0820 23

MT TS 100 100.0 8.85 98 1/4" 8432 0820 24

MT TS 200 200.0 17.70 98 1/4" 8432 0820 25

MT TS 500 500.0 44.25 111 1/4" 8432 0820 52

In-linerotarytorquetransducer

MT TR 2 2.0 0.18 76 Ø 3 mm 8432 0820 29

MT TR 5 5.0 0.44 76 Ø 3 mm 8432 0820 30

MT TR 10 10.0 0.88 76 Ø 5 mm 8432 0820 31

MT TR 20 20.0 1.77 76 Ø 5 mm 8432 0820 32

MT TR 50 50.0 4.42 105 1/4” 8432 0820 33

MT TR 100 100.0 8.85 105 1/4” 8432 0820 34

MT TR 200 200.0 17.70 105 1/4" 8432 0820 35

MT TR 500 500.0 44.25 105 1/4" 8432 0820 36

In-linerotarytorqueandangletransducer

MT TRA 2 2.0 0.18 76 Ø 3 mm 8432 0820 41

MT TRA 5 5.0 0.44 76 Ø 3 mm 8432 0820 42

MT TRA 10 10.0 0.88 76 Ø 5 mm 8432 0820 43

MT TRA 20 20.0 1.77 76 Ø 5 mm 8432 0820 44

MT TRA 50 50.0 4.42 105 1/4” 8432 0820 45

MT TRA 100 100.0 8.85 105 1/4” 8432 0820 46

MT TRA 200 200.0 17.70 105 1/4" 8432 0820 47

MT TRA 500 500.0 44.25 105 1/4" 8432 0820 48

JointKit OrderingNo.

M1.6 for MT TS - 3H7 adapter (up to 20 Ncm) 8432 0830 79

M2 for MT TS - 1/4" adapter (up to 50 Ncm) 8432 0830 78

M2.5 for MT TS - 1/4" adapter (up to 100 Ncm) 8432 0830 77





Accessories, stationary torque transducers

Lensheadscrew BitDrive OrderingNo.

DIN7985 PH0 M1.6x4 V2A PH0 4023 0005 01

ISO14583 TX6 M2.0x10 V2A TX6 4023 0005 02

ISO14583 TX8 M2.5x10 V2A TX8 4023 0005 03

ISO14583 TX10 M3.0x10 V2A TX10 4023 0005 04

ISO14583 TX20 M4.0x12 V2A TX20 4023 0005 05

ISO14583 TX25 M5.0x12 V2A TX25 4023 0005 06

ISO14583 TX30 M6.0x12 V2A TX30 4023 0005 07

Fasteners for joint kits

Model OrderingNo.

AcTA MT 4 (programable over keypad) 8432 0820 04

ToolsTalk MT Analysis (trace analysis) 8432 0830 31

Transducer cable 8432 0830 35

RS232 cable AcTA MT 8432 0831 39

Torque analyzerFastener



Atlas Copco Screwdriver Bits – Hexagon Drive

Drive system: 1/4’’ Hexagon, Style C 6.3Screw profile:

Slotted bits

Application: For slotted screwsDrive: 1/4’’ Hexagon, Style C 6.3

Phillips bits

Application: For Phillips screwsDrive: 1/4’’ Hexagon, Style C 6.3

Hex bits

Application: For Hex-socket screwsDrive: 1/4’’ Hexagon, Style C 6.3

Drive system: 5/16’’ Hexagon, Style C 8 Screw profile:

Bladethickness(mm)

Bladewidthmm

Lengthmm OrderingNo.

0.7 3.4 25 4023 1400 21

0.8 3.9 25 4023 1400 22

1 5.5 25 4023 1400 26

Slotted bits

Application: For slotted screwsDrive: 3 mm Hexagon

Drive system: 3 mm Hexagon Screw profile:

Bladethickness(mm)

Bladewidthmm


0.3 1.8 50 4023 0004 03

0.4 2 50 4023 0004 04

0.4 2.5 50 4023 0004 05

0.5 3 50 4023 0004 06

0.5 4 50 4023 0004 07

0.5 3.5 50 4023 0004 08

0.5 4.5 50 4023 0004 09

0.8 4 50 4023 0004 10

0.8 5.5 50 4023 0004 11

PointLength

mm OrderingNo.

PH0 25 4023 1326 00

PH1 25 4023 0696 01

PH2 25 4023 0697 01

PH3 25 4023 0698 01

PointLength

mm OrderingNo.

2 25 4023 1318 00

2.5 25 4023 1319 00

3 25 4023 0819 00

4 25 4023 1320 00

5 25 4023 0820 00

6 25 4023 0821 00

7 25 4023 1430 00

8 25 4023 0905 00

Hex bits

Application: For Hex-socket screwsDrive: 5/16’’ Hexagon, Style C 8

PointLength

mm OrderingNo.

5 25 4023 1215 00

6 25 4023 1216 00

7 25 4023 1219 00

8 25 4023 1217 00

10 25 4023 1218 00

Pozidriv bits

Application: For Pozidriv screwsDrive: 1/4’’ Hexagon, Style C 6.3

PointLength

mm OrderingNo.

PZ1 25 4023 1101 11

PZ2 25 4023 1101 12

PZ3 25 4023 1101 13

TorxPlus bits

Application: For TorxPlus screwsDrive: 1/4’’ Hexagon, Style C 6.3

PointLength

mm OrderingNo.

IP6 25 4023 0001 70

IP8 25 4023 0001 74

IP10 25 4023 0001 78

Torx bits

Application: For Torx screwsDrive: 1/4’’ Hexagon, Style C 6.3

PointLength

mm OrderingNo.

TX6 25 4023 0001 60

TX8 25 4023 1329 00

TX9 25 4023 1330 00

TX10 25 4023 1321 00

TX15 25 4023 1331 00

TX20 25 4023 1322 00

TX25 25 4023 1332 00

TX27 25 4023 1333 00

TX30 25 4023 1323 00

TX40 25 4023 1334 00


ScREWDRIVER BITS

Slotted bits with finder

Application: For slotted screwsDrive: 1/4’’ Hexagon, Style E 6.3

D

d

t

Outsidedia(D)mm

Bladethickness(t)mm

Bladewidth(d)mm


9.5 0.9 4.9 95 4023 0683 00

11.1 1 6.1 93 4023 1313 00

12.7 1.1 7.4 93 4023 0684 00

14.3 1.2 8.9 96 4023 0949 00

15.9 1.3 10 95 4023 0685 00

Phillips bits

Application: For Phillips screws Drive: 3 mm Hexagon

PointLength

mm OrderingNo.

00 50 4023 0004 00

0 50 4023 0004 01

1 50 4023 0004 02

Torx bits

Application: For Torx screwsDrive: 3 mm Hexagon

PointLength

mm OrderingNo.

T6 50 4023 0004 14

T7 50 4023 0004 15

T8 50 4023 0004 16

T10 50 4023 0004 17

Pozidriv bits

Application: For Pozidriv screwsDrive: 3 mm Hexagon

PointLength

mm OrderingNo.

PZ0 50 4023 0004 12

PZ1 50 4023 0004 13

Phillips bits

Application: For Phillips screwsDrive: 1/4’’ Hexagon, Style E 6.3

PointLength

mm OrderingNo.

PH00 50 4023 0001 51

PH00 70 4023 0001 52

PH00 90 4023 0001 53

PH0 50 4023 1325 00

PH1 50 4023 2320 21

PH1 70 4023 2327 21

PH1 89 4023 2335 21

PH1 152 5023 2360 21

PH2 50 4023 2320 22

PH2 70 4023 2327 22

PH2 89 4023 2335 22

PH2 152 4023 2360 22

PH3 50 4023 2320 23

PH3 70 4023 2327 23

PH3 89 4023 2335 23

PH3 152 4023 2360 23

Torx bits

Application: For Torx screwsDrive: 1/4’’ Hexagon, Style E 6.3

PointLength

mm OrderingNo.

TX5 50 4023 0002 16

TX5 70 4023 0002 17

TX6 50 4023 0001 61

TX6 70 4023 0001 62

TX6 90 4023 0001 63

TX7 50 4023 0002 18

TX7 70 4023 0002 19

TX8 50 4023 2220 21

TX8 89 4023 2235 21

TX9 50 4023 2220 22

TX9 89 4023 2235 22

TX10 50 4023 2220 23

TX10 89 4023 2235 23

TX15 50 4023 2220 24

TX15 89 4023 2235 24

TX20 50 4023 2220 25

TX20 89 4023 2235 25

TX25 50 4023 2220 26

TX25 89 4023 2235 26

TX27 50 4023 2220 27

TX27 89 4023 2235 27

TX30 50 4023 2220 28

TX30 89 4023 2235 28

TX40 89 4023 2235 29

Slotted bits

Application: For slotted screwsDrive: 1/4’’ Hexagon, Style E 6.3

Drive system: 1/4’’ Hexagon, Style E 6.3 Screw profile:

Bladethickness(mm)

Bladewidth(mm)


3.2 0.7 49 4023 2020 21

3.9 0.8 49 4023 2020 23

4.7 0.9 49 4023 2020 24

6.3 1 49 4023 2020 26

7 1.1 49 4023 2020 27

7.9 1.2 49 4023 2020 28

9.1 1.3 49 4023 2020 29

3.2 0.7 76 4023 2030 21

3.9 0.8 76 4023 2030 23

4.7 0.9 76 4023 2030 24


Adapters

Hex bits

Application: For Hex-socket screwsDrive: 7/16’’ Hexagon, Style E 11.2

TorxPlus bits

Application: For TorxPlus screwsDrive: 1/4’’ Hexagon, Style E 6.3

PointLength

mm OrderingNo.

IP5 50 4023 0002 20

IP5 70 4023 0002 21

IP6 50 4023 0001 71

IP6 70 4023 0001 72

IP6 90 4023 0001 73

IP7 50 4023 0002 23

IP7 70 4023 0002 24

IP7 90 4023 0002 25

IP8 50 4023 0001 75

IP8 70 4023 0001 76

IP8 90 4023 0001 77

IP10 50 4023 0001 79

IP10 70 4023 0001 80

IP10 90 4023 0001 81

Pozidriv bits

Application: For Pozidriv screwsDrive: 1/4’’ Hexagon, Style E 6.3

PointLength

mm OrderingNo.

PZ0 50 4023 0001 41

PZ0 70 4023 0001 42

PZ1 50 4023 2420 21

PZ1 70 4023 2427 21

PZ1 89 4023 2435 21

PZ2 50 4023 2420 22

PZ2 70 4023 2427 22

PZ2 70 4023 2435 22

PZ3 50 4023 2420 23

PZ3 89 4023 2435 23

OrderingNo.

Adapter 4220 0105 00

PointLength

mm OrderingNo.

5 70 4023 0800 00

6 70 4023 0801 00

8 70 4023 0802 00

10 70 4023 0760 00

Bit holders

Standard type

L1 L Hf

DD1

Hs

Hexdrive

Hexfemale

Diameter(D)mm

Diameter(D1)mm

LengthLmm

LengthL1mm Magnetic OrderingNo.

1/4" 1/4" 9.5 7.9 47.8 53.8 Yes 4023 1208 00

1/4" 1/4" 9.5 7.9 47.8 104.8 Yes 4023 1209 00

Quick release type

L 1 L HfHs

D

Hexdrive

Hexfemale

Diameter(D)mm

LengthLmm

LengthL1mm Magnetic OrderingNo.

1/4" 1/4" 9.4 35.7 25.4 Yes 4023 1353 00

1/4" 1/4" 9.4 50 25.4 Yes 4023 0707 00

Drive system: 7/16’’ Hexagon, Style E 11.2 Screwprofile

Drive system: 1/4’’ Hexagon, Style E 6.3 Application: Suitable for bits with 1/4”Hexagon Drive

Drive system: 1/4’’ Hexagon, Style E 6.3 Application: For bits with Wing-Shank4 mm drive

Hex bits

Application: For Hex-socket screwsDrive: 1/4’’ Hexagon, Style E 6.3

PointLength

mm OrderingNo.

2 49 4023 1311 00

2.5 49 4023 1312 00

3 49 4023 0710 00

4 49 4023 0711 00

5 49 4023 0712 00

6 49 4023 0906 00

6.35 49 4023 0942 00

8 49 4023 1369 00

10 49 4023 1370 00


ScREWDRIVER BITS

PointLength

mm OrderingNo.

TX1 40 4023 0002 52

TX2 60 4023 0002 53

TX3 60 4023 0002 54

TX4 60 4023 0001 90

TX5 60 4023 0001 91

TX6 60 4023 0001 92

TX8 60 4023 0001 93

TX10 60 4023 0001 94

PointLength

mm OrderingNo.

IP4 60 4023 0002 10

IP5 60 4023 0002 11

IP6 60 4023 0002 12

IP8 60 4023 0002 13

IP10 60 4023 0002 14

PointLength

mm OrderingNo.

PH00 40 4023 0002 56

PH0 40 4023 0002 57

PH0 60 4023 0002 03

PH1 40 4023 0002 58

PH2 40 4023 0002 59

PointLength

mm OrderingNo.

1.5 60 4023 0002 60

2 60 4023 0002 61

2.5 60 4023 0002 62

3 60 4023 0002 63

PointBladewidth

mmLength

mm OrderingNo.

0.28 1.3 60 4023 1327 01

0.30 1.7 60 4023 1327 02

0.3 2.0 60 4023 1327 03

0.3 2.5 60 4023 1327 04

PointLength

mm OrderingNo.

PZ0 60 4023 0002 03

PZ1 60 4023 0002 04

PZ2 60 4023 0002 55

Atlas Copco Screwdriver Bits – Wing-shank Drive

Drive system: 4 mm Wing-shankScrew profile:

Torx bits

Application: For Torx screwsDrive: Wing-shank 4 mm

TorxPlus bits

Application: For TorxPlus screwsDrive: Wing-shank 4 mm

Pozidriv bits

Application: For Pozidriv screwsDrive: Wing-shank 4 mm

Slotted bits

Application: For Slotted screwsDrive: Wing-shank 4 mm

Phillips bits

Application: For Phillips screwsDrive: Wing-shank 4 mm

Hex bits

Application: For Hex screwsDrive: Wing-shank 4 mm


ScREWDRIVER BITS

Atlas Copco Screwdriver Bits – Halfmoon Drive

Drive system: 4 mm HalfmoonScrew profile:

Pozidriv bits

Application: For Pozidriv screwsDrive: Halfmoon 4 mm

Drive system: 4 mm HalfmoonApplication: Suitable for bits with 1/4’’ Hexagon drive

Adapters

Phillips bits

Application: For Phillips screwsDrive: Halfmoon 4 mm

PointLength

mm OrderingNo.

PZ0 44 4023 0002 26

PZ0 64 4023 0002 27

PZ1 44 4023 0002 28

PZ1 64 4023 0002 29

Hex bits

Application: For Hex-socket screwsDrive: Halfmoon 4 mm

PointLength

mm OrderingNo.

1.5 44 4023 0002 41

2 44 4023 0002 42

2.5 44 4023 0002 43

3 44 4023 0002 44

Model OrderingNo.

Non magnetic 4023 0002 15

Slotted bits

Application: For slotted screwsDrive: Halfmoon 4 mm

Bladewidth(mm)

Bladethicknessmm


2 0.3 44 4023 0002 37

2.5 0.3 44 4023 0002 38

3 0.4 44 4023 0002 39

4 0.5 44 4023 0002 40

PointLength

mm OrderingNo.

PH000 44 4023 0001 10

PH000 64 4023 0001 11

PH00 44 4023 0001 12

PH00 64 4023 0001 13

PH0 44 4023 0001 14

PH0 64 4023 0001 15

PH1 44 4023 0001 16

PH1 64 4023 0001 17

PH1 90 4023 0001 18

PH2 44 4023 0002 30

PH2 64 4023 0002 31

Hex-socket bits

Nutsetter.Application: For nuts and thread-headed screwsDrive: Halfmoon 4 mm

PointLength

mm OrderingNo.

2.3 44 4023 0002 45

2.5 44 4023 0002 46

3 44 4023 0002 47

4 44 4023 0002 48

4.5 44 4023 0002 49

5 44 4023 0002 50

5.5 44 4023 0002 51

TorxPlus bits

Application: For TorxPlus screwsDrive: Halfmoon 4 mm

PointLength

mm OrderingNo.

IP2 44 4023 0002 35

IP3 44 4023 0002 36

IP4 44 4023 0001 30

IP4 64 4023 0001 31

IP5 44 4023 0001 32

IP5 64 4023 0001 33

IP6 44 4023 0001 34

IP6 64 4023 0001 35

IP8 44 4023 0001 36

IP8 64 4023 0001 37

IP10 44 4023 0001 38

IP10 64 4023 0001 39

Torx bits

Application: For Torx screwsDrive: Halfmoon 4 mm

PointLength

mm OrderingNo.

TX1 44 4023 0002 32

TX2 44 4023 0001 06

TX3 44 4023 0001 08

TX3 64 4023 0001 09

TX4 44 4023 0001 20

TX4 64 4023 0001 21

TX5 44 4023 0001 22

TX5 64 4023 0001 23

TX6 44 4023 0001 24

TX6 64 4023 0001 25

TX8 44 4023 0001 26

TX8 64 4023 0001 27

TX10 44 4023 0001 28

TX10 64 4023 0001 29


The declared values given in this table were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared values of other tools tested in accordance with the same standards. These declared values are not ad-equate for use in risk assessments and values measured in individual workplaces may be higher. The actual expo-sure values and risk of harm experienced by an individual user are unique and depend upon the way the user works, the workpiece and the workstation design, as well as upon the exposure time and the physical condition of the user.

We, Atlas Copco Tools AB, cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assessment in a workplace situation over which we have no control.

Power Tools may cause hand-arm vibration syndrome if their use is not adequately managed. An EU guide to managing hand-arm vibration can be found athttp://www.humanvibration.com/EU/VIBGUIDE.htm We recommend a program of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can be modified to help prevent future impairment.All values are current as of the date of this publication.

For the latest information please visitwww.atlascopco.com/tools/ergonomics

VIBRATION AND NOISE EMISSION VALUES

Vibrationtotalvalue

Vibrationvalue

Soundpressurelevels

(3-axesvalue) (1-axisvalue) andsoundaccordingto accordingto powerlevelsa

ISO28927-2 ISO8662-1 accordingto

Validfrom2010

Validuntil2009

ISO15744

Value3-axes

Uncer-tainty

Value1-axisSound

pressureSoundpower

Model m/s2 m/s2 m/s2 dB(A) dB(A)

PneumaticscrewdriversPistolgrip

Shut-offLUM10 <2.5 <2.5 72LUM12 HRX <2.5 <2.5 74LUM12 HRF <2.5 <2.5 <70LUM22 <2.5 <2.5 78

StraightShut-offLUM02 <2.5 <2.5 71LUM10 <2.5 <2.5 <70LUM12 <2.5 <2.5 75LUM22PR <2.5 <2.5 75LUM22SR <2.5 <2.5 78

AngleShut-offLTV009 <2.5 <2.5 75

BatteryscrewdriversBcP <2.5 <2.5 <70

ElectricscrewdriversEBL <2.5 <2.5 <70ETF M/MT — — <70ETD M <2.5 <2.5 <70ETD DL <2.5 <2.5 <70ETV DL <2.5 <2.5 <70ETP DL <2.5 <2.5 <70ETD SL <2.5 <2.5 <70ETV SL <2.5 <2.5 <70ETP SL <2.5 <2.5 <70

a The uncertainty in the sound levels is 3 dB(A).

b Vibrations are not given for tools intended for fixtured applications.


9833

177

8 01

Rec

ycla

ble

pape

r. Je

tlag

2010

:1

www.atlascopco.com

atlas copco screwdrivers - indpro (m) sdn...

Documents