atdi overview nov 2018 electronica - alcom> ] µ o z } d /ltxd%odghdqg 6khoi 9$& sk ,qsxw...
TRANSCRIPT
High Power Standard Platform Roadmap
V. 01/19
Singel 3 | B-2550 Kontich | Belgium | Tel. +32 (0)3 458 30 33 | [email protected] | www.alcom.be
Rivium 1e straat 52 | 2909 LE Capelle aan den Ijssel | The Netherlands | Tel. +31 (0)10 288 25 00 | [email protected] | www.alcom.nl
Mercury Flex Road Map
Full Suite of Mercury Series Fixed Voltage• 800W to 3.8KW Modules• Fixed Outputs: 12V to 376V
Existing In Development
Mercury Flex • 3.8KW Output Power• Wide Range Output: 28V, 56V,
125V, 250V, 450V• DPO for Current, Power, Voltage• SEMI-F47 Compliant
2019 and Beyond
Low Power - Medically Certified Mercury Flex• 1.5kW Output• 220VAC, 1-ph input• CV, CC, CP Control• Medical IEC60601 • Compliant with 2 MOPP • SEMI F47 Compliant • Targets lower power
Industrial Process Systems and Medical Systems
• Advantages:• Power Density• System Flexibility
• Target Compl: Q3’19
Power Node - Mercury Flex 12kW System• 220VAC, 3-phase input• 12kW Output Power – All
Flex PSU Variants• CV, CC Control – Analog
and Digital Interface• Front Panel User Interface• SEMI F47 Compliant • Targets Industrial Systems
typically served by Laboratory Grade Supplies
• Advantages:• Power Density• System Up Time – MTTR• Reduced Cost
• Target Compl: Q4’18 (plus variations)
480V/3-phase Input Mercury Flex• 4000W Output• 480V 3-ph AC Input• CV, CC, CP Control• SEMI F-47 Compliant• DPO for Current, Power,
Voltage• Targets Industrial
Systems operating from 480VAC
• Advantages:• Power Density• System Flexibility
• Target Compl: Q1’20
High Current Output Mercury Flex• 350A Output• CV, CC, CP Control• SEMI F-47 Compliant• DPO for Current,
Power, Voltage• Targets Industrial
Systems operating from 12-18VDC
• Advantages:• Power Density• System Flexibility
• Target Compl: pending demand
• Develop new High Voltage True 3-ph input capability to Mercury Flex platform• Add capability for Medical Certification to 1500W Mercury Flex• Develop High Output Current Mercury Flex
LiquaBlade Road Map
LiquaBlade and Shelf• 480VAC 3-ph Input• Blind Mate• Liquid Cooled • 16.5kW / 0-60V, 0-120V,
0-180V• DPO for Current, Power,
Voltage
Low Voltage Input LiquaBlade• 230VAC 3-ph Input• Hard Wired• 12kW• Fixed 48V Output • Ethernet Interface
Existing
60KW Non-Isolated LiquaBlade• 480VAC 3-ph Input• Hard Wired• 0-400V (3 Channels)• Target Compl: Q4’18
2019 and beyond
eLink2• System-level Controller• Variations for small or
large systems• Provides Comm Bridge to
Host System Protocols• Target Compl: Q1’19
500V LiquaBlade
• 480VAC 3-ph Input• 16.5kW• DPO for Current,
Power, Voltage• Advantages:
• Power Density• System Flexibility
• Target Compl: Q4 ‘19
Short Depth LiquaBlade 2U
• 480VAC 3-ph Input• 16.5kW• DPO for Current,
Power, Voltage• Advantages:
• Power Density• Reduced Depth
• Target Compl: Q2’19
In Development
6kW Stand-Alone Liquid-Cooled Power Module• True 3-phase PFC
Input for better scalability (6kW)
• Increased Power Density – 24W/cu in
• Cost reduced by >20%• Advantages:
• Power Density• System Flexibility
• Target Compl: Q3’19
Making the world’s most flexible water cooled solutions even more flexible by creating solutions with: smaller increments (6kw), true 3-ph PFC, shorter depth, and higher voltage
4-Slot LiquaBlade Shelf• Facilitates integration of
larger systems• Target Compl: Q4’18
Medical UPS Road Map
MediPower 2 (250W)• 110VAC or 220VAC
Output• Medically Certified UPS• Li-Ion Battery Integrated
Existing
MediPower-3 (175W)• 110 VAC Output• Medically Certified UPS• Li-Ion Battery Integrated
Power Bridge Extended Battery• Increase Power Bridge Run
Time to 12 minutes at 2kW• Target Compl: Q4 ‘19
In Development
Power Bridge 2KW Medical UPS• 110VAC• Universal Input• Lithium Ion Battery• Medical and Industrial Certified• 2U Height Short Depth• Stackable• Advantages:
• Power Density/ Weight• Medical Certified
• Target Compl: Q4’18
Leverage our medical expertise to introduce the lightest and smallest 2kVA Rack-mount UPS with 2MOPP
2019 and beyond
Power Bridge 220VAC
• International version of the 2KW UPS
• Target Compl: pending demand
High Voltage Road Map
Existing In Development
1200V/300W AC-DC Power Supply• Universal Input• Adjustable Output up
to 1200VDC• SEMI F47 Compliant• Advantages:
• Power Density/ Weight
• Target Compl: Q4’18
1200V/12W DC-DC Power Supply• 24VDC Input• Adjustable Output up to
1200VDC• Advantages:
• Power Density/ Weight• Target Compl: Q4’18
Biploar Compatible Output (+/-1200V)• Flexible configurations• Target Compl: Q4’19
2500V Output Power Supply• Prepare for changing needs in
Front End applications • 2500V is stretching capabilities
No plans for higher voltages• Target Compl: 2020
2019 and beyond
Introduce new High Voltage products in order to extend our reach in existing accounts and open up new opportunities in the Front-End.
Stay below 2.5KV as technology is not well understood by the current engineers
High Power Product Overview
• LiquaBlade™ AC-DC Converters 16.5kW 1U, Hot Swap, Liquid Cooled, PFC0-60V, 180V DC Outputs w/ Digital Control380V-480VAC Input
• Mercury Flex AC-DC ConvertersWide Range DC Output w/ Digital Control3800W, 2U, HS, AirSampling: Jan 2016
• Mercury AC-DC/DC-DC Converters800W-3800W 2U, Hot Swap, Air Cooled
• LiquaCore® DC-DC Converters2400-4300W Liquid Cooled Technology
• Defender ICCP – Corrosion Control2500W Indoor/Outdoor – Marine & Oil/Gas
• ESPM AC-DC/DC-DC ConvertersFully Environmentally Sealed / Conv. Cooled2500W: 50V/50A, 25V/100A
High Power Capabilities
• Can Address Virtually Any Requirement for Custom Power Products
• Parallel/Serial Module Configuration in Systems >500kW and >600V
• Full System Integration with AC/DC Power Distribution Units, Breakers, Etc..
• Experienced in Harsh Environmental [IP67, NEMA-3/4/6, FM, Hazardous Location], and Temperature Considerations
• Stringent Output Tolerances
• Digital Control Interfaces [EtherCAT Etc.]
• High Power and High Density Rectifiers • Modules up to 16.5KW in 1U space• High Frequency Switch Mode • Full Power Factor Correction• Liquid Cooled
• Wide Range Inputs/Outputs • 380V - 480VAC Input • Up to 400VDC Output
• Hot Swap Blind Mate Connections• Simple Maintenance
• Virtually Any Digital Process Control • Ethercat, Ethernet, MODbus,
CANbus, RS232, RS485, USB
LiquaBlade™ Highly Customized Industrial Solutions
• High Power and High Density Rectifiers • 0 to 60VDC Out• 0 to180VDC Out• 48VDC Fixed Out
• Shelf Assembly• Enabler for Hot Swap, Easy Maintenance
• System Controller• Enabler for Remote Programming,
System Monitoring, Zone Control• Enabler for Easy Rectifier Evaluation
• Browser BasedGraphical User Interface
• Enabler for Demonstration/Evaluation
LiquaBlade™ Components
• Scalable and Reliable Cabinet• Hot Swap - Blind Mate Connections
• Simple Maintenance • Low MTTR and Maximum Up Time
• Up to 500kW• Distribution & Management
• AC Power• DC Power• Coolant
• High Density • LiquaRackTM Controller• 380V / 480VAC direct input• Precision control of voltage and current
System Level Solutions -For High Power AC/DC Industrial Solutions
Platform Products Foundation for customized solutions
Scalable Solutions
• Module Power Ratings from 800 to 4,300W
• DC Outputs ranging from 12V to 400V DC
• Parallel-able to ~40 units
• Series (dependent upon voltage)
Input Voltage Range 90V to 275V & 480VAC 3-phase
Air Cooled Power
• Mercury Flex Air-Cooled AC-DC Power Supply• Ideal Replacement for Thyristor Controlled
Converters • Modular / scalable product• Up to 15kW in 2U Rack-mount Shelf• Blind-mate / hot plug compatible• 190-240VAC Input • 0-28V, 0-56V, 0-85V, 0-125V, 0-400V Models• Wide range output suited to process control
applications (Constant Voltage, Constant Current or Constant Power)
• Full Power Factor Correction (Low Input Harmonic Currents)
• SEMI F47 Compliant with 20ms Holdup at Full Power
• On-board CAN bus and Shelf Level Ethernet Controller
• Legacy Standard Mercury Models include 24V & 48V DC Input Options
Air-Cooled Power
Blind-Mate Shelf-Mount Version
Bulk Head Mount Embedded Version
Up to 15kW of Delivered Power in 2U Shelf
Up to 7,5kW of Delivered Power in 1U Shelf
Air Cooled Power
Power Control and Distribution for Industrial Applications
• Hot-Pluggable Inputs
• Pluggable shelf architecture
• Easy maintainability
• Customizable System Configurations
• Packaging to suit
Highly Customized Industrial Solutions
Dynaload DC Electronic Loads• Single channel air cooled• Multi-channel air cooled• Single channel water cooled• Master/Slave functionality• Rack Systems air cooled and water cooled (120kW+)
KEY FEATURES• Ultra fast slew rate• Flexible duty cycle• Full scale range switching (three selectable)• Assortment of performance indicators• Exceptional self-protection circuitry• Over voltage (OV)• Over current (OC)• Reverse polarity• Thermal protection (with auto-disconnect)• Simultaneous LED display of voltagecurrent and power• 10+ Memory Presets for Saving Load Profiles• Remote voltage sense• 120V/230VAC 50/60Hz• Ethernet, IEEE488 GBIP, RS232 , 0-10V analog control• Labview drivers
Where there is DC power, there is a need to test it.
Singel 3 | B-2550 Kontich | Belgium | Tel. +32 (0)3 458 30 33 | [email protected] | www.alcom.be
Rivium 1e straat 52 | 2909 LE Capelle aan den Ijssel | The Netherlands | Tel. +31 (0)10 288 25 00 | [email protected] | www.alcom.nl