THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.PLEASE READ AND KEEP FOR FUTURE REFERENCE.

1

Dining Side Chair

Assembly Manual

Model Number: TM610509

9 PC Teak Dining Set with Cushion

2

Important Safety InformationPlease read all instructions carefully before assembling this furniture.For your safety, assembly by two or more adults is strongly recommended.Use only vendor-supplied hardware to assemble this item. Using unauthorizedhardware could jeopardize the structural integrity of the item.Hardware may loosen overtime. Periodically check that all connections are tight.

···

·

Before AssemblyRemove all parts and hardware from the box. Place all items on a carpeted orscratch-free work surface, as this will avoid damaging parts during assembly.The shipping box provides an ideal work surface.To avoid accidentally discarding small parts or hardware, do not dispose of anypackaging or contents of the shipping carton until assembly is complete.Use the parts and hardware lists below to identify and separate each of thepieces included.The use of power tools for assembly is not recommended. Power tools candamage the hardware and/or split the wood.Note: Do not fully tighten all bolts until all parts are in place. Failure to followthese instructions may cause the bolts to misalign during assembly.

·

·

··

·

·

Care and CleaningTo increase the item lifespan, avoid leaving the furniture in standing water orindirect contact with wet ground.

·

Cover or move the furniture into covered storage during inclement weather andduring winter months.

·

Clean periodically with soft flannel cloth, slightly dampened with a mild soapsolution and warm water. DO NOT use abrasive material, bleach or scouringproducts. Dry thoroughly with soft cloth.

·

3

Short BoltQty: 4 Pcs + 1

Phillips Screwdriver

Tools Needed for Assembly

Hardware

(D)

Need assistance? Visit us at: samsclub.com/membersmarkhelp

Component

(E)

A1 ..........A2 ..........B ............C ............

1 PC1 PC1 PC1 PC

Right side frame .................Left side frame ....................Backrest .............................Seat ......................................

Long boltQty: 4 Pcs + 1

(F)

A1 A2 B C

Elbow HardwareQty: 2 Pcs

Step 1

4Need assistance? Visit us at: samsclub.com/membersmarkhelp

(E)Long BoltQty: 2 Pcs

(D)Short BoltQty: 4 Pcs

CB

A1

E

E

A2

B

A1

D

F

(E)Long BoltQty: 2 Pcs

Attach the Right side frame (A1), Back rest (B)and Seat (C) matching the hole and secure withLong Bolt (E). Tighten all bolts using screwdriver.

Attach the Left side frame (A2) matching to holeprevious assembly. secure with long bolt (E).Tighten all bolts using screwdriver.

Install the Elbow Hardware (F) in the upperback corner. secure with short bolt (D). Insertboth short bolt (D) before Tighten usingscrewdriver. THE CHAIR IS NOW READY FOR USE

MAINTENANCEDue to teak wood's natural characteristics, wood color and grain variations may bepresent. This is a symbol of the originality of each unit and gives each finished piece adistinctive look and inherent charm.

Care Instruction :Teak wood, when left bare and unsanded, will naturally fade to a silver-gray color. Thissilver-gray color transformation does not in any way affect the durability of the furniture.

To maintain the smooth finish and golden brown color of your teak furniture, you willneed to sand the furniture regularly. To prolong the period of time needed betweensanding, teak oil may also be applied.

If you choose to apply teak oil, apply every 6 months, or follow the teak oil containerdirections. Again, if you choose to maintain the smooth brown finish of your teakfurniture, this method requires some regular maintenance, such as sanding andreapplication of teak oil. Teak oil, along with sanding, will help maintain the goldenbrown color.

Staining :Please note, once you stain your teak, it will not return to the natural golden brown orweathered silver-gray color without sanding off the stain. Staining is intended to bepermanent. If you choose to stain your furniture after it has turned silver-gray, you mustfirst sand it before applying the stain.

Cushions :Outdoor fabrics are designed to be breathable; they are water repellent but are notwaterproof. It is recommended that you store the cushions during rainy weather.

The best way to keep your fabrics looking good is to simply clean them as needed. Rinseoff dust and dirt, wipe spills as soon as they occur, or spot clean soon after stains occur.Removable cushion covers may be machine-washed in cold water with mild laundrysoap and air dried.

Do not leave your teak wood furniture in puddles of water or on wet ground.

Cover your teak wood furniture during winter months or move into coveredstorage, if in wet climates.

The manufacturer supports protection of the world's forest resources and isdiligent in sourcing legally harvested wood.Thank youThe manufacturer

5

Step 2

Step 3 Step 4(F)Elbow HardwareQty: 2 Pcs

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.PLEASE READ AND KEEP FOR FUTURE REFERENCE.

1

Dining Arm Chair

Assembly Manual

Model Number: TM610509

9 PC Teak Dining Set with Cushion

2

Important Safety InformationPlease read all instructions carefully before assembling this furniture.For your safety, assembly by two or more adults is strongly recommended.Use only vendor-supplied hardware to assemble this item. Using unauthorizedhardware could jeopardize the structural integrity of the item.Hardware may loosen overtime. Periodically check that all connections are tight.

···

·

Before AssemblyRemove all parts and hardware from the box. Place all items on a carpeted orscratch-free work surface, as this will avoid damaging parts during assembly.The shipping box provides an ideal work surface.To avoid accidentally discarding small parts or hardware, do not dispose of anypackaging or contents of the shipping carton until assembly is complete.Use the parts and hardware lists below to identify and separate each of thepieces included.The use of power tools for assembly is not recommended. Power tools candamage the hardware and/or split the wood.Note: Do not fully tighten all bolts until all parts are in place. Failure to followthese instructions may cause the bolts to misalign during assembly.

·

·

··

·

·

Care and CleaningTo increase the item lifespan, avoid leaving the furniture in standing water orindirect contact with wet ground.

·

Cover or move the furniture into covered storage during inclement weather andduring winter months.

·

Clean periodically with soft flannel cloth, slightly dampened with a mild soapsolution and warm water. DO NOT use abrasive material, bleach or scouringproducts. Dry thoroughly with soft cloth.

·

3

Short BoltQty: 4 Pcs + 1

Phillips Screwdriver

Tools Needed for Assembly

Hardware

(D)

Need assistance? Visit us at: samsclub.com/membersmarkhelp

Component

(E)

A1 ..........A2 ..........B ............C ............

1 PC1 PC1 PC1 PC

Right side frame .................Left side leg ........................Backrest .............................Seat ......................................

Long boltQty: 4 Pcs + 1

(F)

A1 A2 B C

Elbow HardwareQty: 2 Pcs

Step 1

4Need assistance? Visit us at: samsclub.com/membersmarkhelp

(E)Long BoltQty: 2 Pcs

(D)Short BoltQty: 4 Pcs

C B

A1

E

E

A2

B

A1

D

F

(E)Long BoltQty: 2 Pcs

Attach the Right side frame (A1), Backrest (B) and Seat(C) matching the hole and secure with Long Bolt (E).Tighten all bolts using screwdriver.

Attach the Left side frame (A2) matching to hole previousassembly. secure with long bolt (E).Tighten all bolts using screwdriver.

Install the Elbow Hardware (F) in the upper back corner.secure with short bolt (D). Insert both short bolt (D) beforeTighten using screwdriver. THE CHAIR IS NOW READY FOR USE

MAINTENANCEDue to teak wood's natural characteristics, wood color and grain variations may bepresent. This is a symbol of the originality of each unit and gives each finished piece adistinctive look and inherent charm.

Care Instruction :Teak wood, when left bare and unsanded, will naturally fade to a silver-gray color. Thissilver-gray color transformation does not in any way affect the durability of the furniture.

To maintain the smooth finish and golden brown color of your teak furniture, you willneed to sand the furniture regularly. To prolong the period of time needed betweensanding, teak oil may also be applied.

If you choose to apply teak oil, apply every 6 months, or follow the teak oil containerdirections. Again, if you choose to maintain the smooth brown finish of your teakfurniture, this method requires some regular maintenance, such as sanding andreapplication of teak oil. Teak oil, along with sanding, will help maintain the goldenbrown color.

Staining :Please note, once you stain your teak, it will not return to the natural golden brown orweathered silver-gray color without sanding off the stain. Staining is intended to bepermanent. If you choose to stain your furniture after it has turned silver-gray, you mustfirst sand it before applying the stain.

Cushions :Outdoor fabrics are designed to be breathable; they are water repellent but are notwaterproof. It is recommended that you store the cushions during rainy weather.

The best way to keep your fabrics looking good is to simply clean them as needed. Rinseoff dust and dirt, wipe spills as soon as they occur, or spot clean soon after stains occur.Removable cushion covers may be machine-washed in cold water with mild laundrysoap and air dried.

Do not leave your teak wood furniture in puddles of water or on wet ground.

Cover your teak wood furniture during winter months or move into coveredstorage, if in wet climates.

The manufacturer supports protection of the world's forest resources and isdiligent in sourcing legally harvested wood.Thank youThe manufacturer

5

Step 2

Step 4Step 3 (F)Elbow HardwareQty: 2 Pcs

THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION.PLEASE READ AND KEEP FOR FUTURE REFERENCE.

1

Teak Dining Table

Assembly Manual

Model Number: TM610509

9 PC Teak Dining Set With Cushion

2

Important Safety InformationPlease read all instructions carefully before assembling this furniture.For your safety, assembly by two or more adults is strongly recommended.Use only vendor-supplied hardware to assemble this item. Using unauthorizedhardware could jeopardize the structural integrity of the item.Hardware may loosen overtime. Periodically check that all connections are tight.

···

·

Before AssemblyRemove all parts and hardware from the box. Place all items on a carpeted orscratch-free work surface, as this will avoid damaging parts during assembly.The shipping box provides an ideal work surface.To avoid accidentally discarding small parts or hardware, do not dispose of anypackaging or contents of the shipping carton until assembly is complete.Use the parts and hardware lists below to identify and separate each of thepieces included.The use of power tools for assembly is not recommended. Power tools candamage the hardware and/or split the wood.Note: Do not fully tighten all bolts until all parts are in place. Failure to followthese instructions may cause the bolts to misalign during assembly.

·

·

··

·

·

Care and CleaningTo increase the item lifespan, avoid leaving the furniture in standing water orindirect contact with wet ground.

·

Cover or move the furniture into covered storage during inclement weather andduring winter months.

·

Clean periodically with soft flannel cloth, slightly dampened with a mild soapsolution and warm water. DO NOT use abrasive material, bleach or scouringproducts. Dry thoroughly with soft cloth.

·

3

Hardware

Need assistance? Visit us at: samsclub.com/membersmarkhelp

BoltQty: 8 Pcs + 1

(C)

Component

A

(D)

A ............B ............

1 PC4 PCS

Table Top ......................Leg .................................

WasherQty: 8 Pcs + 1

B

(E)

Spring WasherQty: 8 Pcs + 1

Allen KeyQty: 8 Pcs + 1

(F)

Attach Leg (B) into the corner of Table Top (A). Secure using Bolts (C),Washers (D) and Spring Washers (E).

Step 1

4

Need assistance? Visit us at: samsclub.com/membersmarkhelp

(C)BoltQty: 8 Pcs

THE TABLE IS NOW READY FOR USE

C

D

B

A

(D)WasherQty: 8 Pcs MAINTENANCE

Due to teak wood's natural characteristics, wood color and grain variations may bepresent. This is a symbol of the originality of each unit and gives each finished piece adistinctive look and inherent charm.

Care Instruction :Teak wood, when left bare and unsanded, will naturally fade to a silver-gray color. Thissilver-gray color transformation does not in any way affect the durability of the furniture.

To maintain the smooth finish and golden brown color of your teak furniture, you willneed to sand the furniture regularly. To prolong the period of time needed betweensanding, teak oil may also be applied.

If you choose to apply teak oil, apply every 6 months, or follow the teak oil containerdirections. Again, if you choose to maintain the smooth brown finish of your teakfurniture, this method requires some regular maintenance, such as sanding andreapplication of teak oil. Teak oil, along with sanding, will help maintain the goldenbrown color.

Staining :Please note, once you stain your teak, it will not return to the natural golden brown orweathered silver-gray color without sanding off the stain. Staining is intended to bepermanent. If you choose to stain your furniture after it has turned silver-gray, you mustfirst sand it before applying the stain.

Do not leave your teak wood furniture in puddles of water or on wet ground.

Cover your teak wood furniture during winter months or move into coveredstorage, if in wet climates.

The manufacturer supports protection of the world's forest resources and isdiligent in sourcing legally harvested wood.Thank youThe manufacturer

5

(E)Spring WasherQty: 8 Pcs

E

Step 2

(F)Allen KeyQty: 1 Pc