Assembly Instructions Cover Sheet

� 6” C-Clamp (suggest Vise-Grip Locking C-Clamp w/Swivel Pad)

� Phillips driver (included)

� Curved Jaw Vice-Grip

� Rubber mallet

� Level

� Allen wrench (included)

� Hex driver (included)

� Cordless Drill

� Work gloves

Proudly made in Magnolia, Arkansas, USA

Our goal is 100% customer satisfaction so please check the contents of your shipment prior to beginning installation. If any parts appear to be damaged,

missing or incorrect, contact a Customer Service Representative immediately at 1-800-648-3696 so we can work with you to quickly solve the problem.

The attached assembly instructions have been prepared for a typical ramp and landing system measuring 4 feet in width across the ramp deck and 30

feet in length up to the landing. The landing depicted in the instructions is 5 foot 4 inches square. When properly installed at a 1:12 slope, this ramp will

allow access to a threshold 30 inches above ground. Please note that the configuration of the ramp system you purchased may differ from that shown on

these instructions (different size landing, different width ramp, walkway sections, etc.). However, the same steps are used for connecting components

illustrated in these instructions. Should you experience any difficulties installing the ramp or have any questions regarding the installation instructions,

please do not hesitate to contact a Customer Service Representative at 1-800-648-3696, M-F between the hours of 8 AM and 5 PM, Central. You may

also visit our web site at www.reddteam.com for PDF copies of these instructions.

Thank you for purchasing this quality aluminum product from REDD Team Manufacturing! We are confident that you will find it to be an excellent access solution for years to come.

REDD Team

The following is a list of tools that are recommended for installation:

34VP\TL: G03316473

REDD Team – Assembly Instructions: 34 VP or TL Ramp System

Aluminum Ramp System With 34” Vertical Picket Or Two Line Guardrail

Table Of Contents 5’-4” Square Landing and Components............................................................................................... page 01

4’-0” x 10’-0” Intermediate Ramp and Components....................................................................... page 02

4’-0” x 10’-0” End Ramp and Components ........................................................................................ page 03

Loose Packed Parts....................................................................................................................................... page 04

Bagged Hardware .......................................................................................................................................... page 05

Bagged Hardware .......................................................................................................................................... page 06

Removable & Jog Hoop Components (34-38 Hoop)..................................................................... page 07

Removable & Jog Hoop Components (34-38 Hoop)..................................................................... page 08

Landing Leg Assembly ................................................................................................................................ page 09

Landing to Building Attachment............................................................................................................... page 10

“Ramp to Landing Connector” Assembly ............................................................................................ page 11

Ramp Leg to Ramp Assembly.................................................................................................................. page 12

Intermediate Ramp to Landing Assembly ........................................................................................... page 13

Lower Ramp to Upper Ramp Assembly ............................................................................................... page 14

End Ramp Rail to End Ramp Assembly ............................................................................................... page 15

End Ramp to Lower Ramp Assembly ................................................................................................... page 16

Ramp Rails to Ramp and Splice Bar Installation .............................................................................. page 17

Landing Rail Installation............................................................................................................................... page 18

Dead End Rail Installation........................................................................................................................... page 19

Straight Hoop Installation............................................................................................................................ page 20

90 Degree Dead End Rail Installation ................................................................................................... page 21

Jog Hoop Installation (Option).................................................................................................................. page 22

90 Degree Hoop Installation (Option) ................................................................................................... page 23

Removable Hoop Angle Bracket & End Cap Installation............................................................... page 24

Landing Connections.................................................................................................................................... page 25

Anti-Skid Tape Application ......................................................................................................................... page 26

Landing to Landing Connector Installation ......................................................................................... page 27