Assembly Instruction Roof Ladder/Roof Gangway on Spacer page 1 MA1506

Industrivägen 1 523 90 Ulricehamn info@welandstal.se

Tel. 0321-261 60 Fax. 0321-167 10 www.welandstal.se

Don't forget to affix the rubber strips under the spacer to avoid chafing.

Assemble the fixing iron on the base

plate and screw to the under-roof using

10 6x35 wood screws.

Assemble the standing seam mount on the roof

seam and tighten the jaws to min. 20Nm. The

jaws must grip round the double-fold edge.

Assemble the fixing profiles on top of the

roofing plate using 5 6.3x19 mm plastic

screws per mount.

Assemble the spacer on the sealing plate using

2 M10 bolt + 2 rubber washers. See assembly

instructions for the sealing plate.

Fixing iron mounted on

the underneath of spacer

with 1 M10x30 + nut

Standing seam mount as-

sembled on the spacer with 1

M10x20 + nut

1 or 2 fixing profiles assem-

bled on spacer using 1

M10x30 coach bolt + nut

Max. distance between spacers 2 m.

Rev.

Date

13

121

1

Assembly Instruction Roof Ladder/Roof Gangway on Spacer page 2 MA1506

Industrivägen 1 523 90 Ulricehamn info@welandstal.se

Tel. 0321-261 60 Fax. 0321-167 10 www.welandstal.se

Assemble the ladder on the spacer, using ladder hooks and 2 M10x20 bolt + nut.

Anti-slip guard. Has to be installed so the loose ladder's rung can latch in the hook and so both sides of the ladder rest against the guttering/roof edge. Use 1 M10x20 + nut

Ladder joint. Assemble using joint bracket and screw joint. 4 M10x20 + nut / joint plate. Bolts are assembled from the inside.

Treads. Hook onto the rung and lock in place using 2 M10x20 + nut. Roof gradient: 8° to 35°

Assemble the roof gangway on the spacer using 2 bolts, M10x20. NOTE! Exact separation fixing c/c 1190

The gangway is joined by overlapping (at least one wave top). 2 bolts M10x20 + nuts are screwed diagonally. At least two mounts on each side of the joint are needed.