ass.4 2011 veh ausama ( u 5 ).2
TRANSCRIPT
-
7/30/2019 Ass.4 2011 Veh Ausama ( U 5 ).2
1/4
Sharjah Institute of TechnologyAssessment Activity Front Sheet
(This front sheet must be completed by the STUDENT where appropriate and included with the work submitted forassessment)
StudentsName:
AssessorsName:
AusamaI.hassan
Date Issued: .4.2012CompletionDate:
.4.2012 Submitted on: / /
Qualification
BTEC National Diploma in Vehicle Technology ( Year-1 )
Unit No.: 5 Unit Title: Applications of Vehicle Science andMathematics
OutcomeNo. :
4OutcomeTitle:
Be able to carry out engine testing and apply scientificprinciples related to vehicle and engine performance.
AssignmentNo. :
4Assessment
Title:
Applying scientific principles to vehicle and engineperformance.Par
t: 1 Of 1
In this assessment you will have opportunities to provide evidence against the followingcriteria. Indicate the page numbers where the evidence can be found
Criteriareference
To achieve the criteria the evidence must showthat the student is able to:
Tick ifmet
Pagenumbers
P9Calculate vehicle performance using Newtons laws andthe equations of motion.
P10Carry out engine testing to obtain data and report onengine performance.
M3Explain, with examples, the importance of the accuracyof data that is used to solve a range of problems relatedto engine and vehicle performance.
D1Compare and analyze actual data and calculated data forengine or vehicle performance.
Declaration
I certify that this assignment is my own work, written in my own words. Any otherpersons work included in my assignment is referenced / acknowledged.
Students Name: Students Signature: Date:
Internal Verifiers approval to use with students
IVs Name:
Ashraf SenbelIVs Signature: Date
Criteria Achieved
P9 P10 M3 D1
-
7/30/2019 Ass.4 2011 Veh Ausama ( U 5 ).2
2/4
BTEC National Diploma in Vehicle Technology ( Year-1 )
Unit 5: Applications of Vehicle Science and Mathematics.
Assignment 4
Task 1 (Pass P6)
A.Calculate the constant applied force ( F ) on a vehicle for a time interval ( t ) of 0.001 seconds, that
causes a change in linear velocity ( v ) of an amount of 0.003 m/sec if the mass of the vehicle and
load is (M=1000 kg).
B.
calculate vehicle performance usingNewtons laws and the equations ofmotionP10 carry out engine testing to obtain dataand report on engine performance.
M3
D1
B.
Task 3 (Pass P8)
Front Sheet
-
7/30/2019 Ass.4 2011 Veh Ausama ( U 5 ).2
3/4
Assessment Feedback Form(This feedback sheet must be completed by the ASSESSOR where appropriate)
-
7/30/2019 Ass.4 2011 Veh Ausama ( U 5 ).2
4/4
StudentsName:
Unit No.: 5Assessment Title:
Applying scientific principles to vehicle
and engine performance.Grading Criteria Achieved:
Unit Title:Applications of Vehicle Science and
MathematicsOutcome No.: 4
OutcomeTitle:
Be able to carry out engine testing and applyscientific principles related to vehicle andengine performance.
AssignmentNo.:
4
Part: 1 of 1
Criteria ReferenceAssessment Criteria
Achieved
Evidence Comments/feedback
P9
Calculate vehicle performance usingNewtons laws and the equations ofmotion. Yes/N
o
calculations
P10Carry out engine testing to obtaindata and report on engineperformance.
Yes/No
calculations
M3
Explain, with examples, theimportance of the accuracy of datathat is used to solve a range ofproblems related to
engine and vehicle performance.
Yes/No
calculations
D1Compare and analyze actual data andcalculated data for engine or vehicleperformance.
Yes/No
calculations
Assessors General Comments:
Assessors Name: Ausama I.
Hassan
Signature: Date:
Students Comments:
Students Name: Signature: Date:
P9 P10 M3 D1
Student's Work has been Internally Verified
IVs Name:
Ashraf Senbel
IVs Signature:Date:
Feedback Sheet