asrock motherboard 775dual 880pro english user manual
TRANSCRIPT
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
1/43
11111
775Dual-880Pro
User Manual
Version 1.0Published May 2005
Copyright2005 ASRock INC. All rights reserved.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
2/43
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
3/43
33333
ContentsContentsContentsContentsContents1. Introduction1. Introduction1. Introduction1. Introduction1. Introduction .......................................................................................................................................................................................................................................................... 55555
1.1 Package Contents .......................................................... 51.2 Specifications ................................................................ 61.3 Supported AGP VGA Card List for AGP Slot ................ 91.4 Supported PCI Express VGA Card List for PCI Express Graphics Slot (PCI Express x 4) ..................... 111.5 Motherboard Layout ...................................................... 12
1.6 ASRock 8CH I/O ............................................................. 132. Installation2. Installation2. Installation2. Installation2. Installation .................................................................................................................................................................................................................................................................... 1414141414
2.1 Screw Holes ................................................................. 142.2 Pre-installation Precautions ........................................... 142.3 CPU Installation .............................................................. 152.4 Installation of Heatsink and CPU fan ............................. 172.5 Installation of Memory Modules (DIMM)......................... 182.6 Expansion Slots ............................................................. 202.7 Surround Display Feature ............................................. 212.8 Jumpers Setup .............................................................. 212.9 Onboard Headers and Connectors .............................. 222.10 Serial ATA (SATA) Hard Disks Installation ................... 25
2.11 Hot Plug and Hot Swap Functions for SATA HDDs ..... 252.12 Installing Windows 2000 / Windows XP / Windows XP 64-bit With RAID Functions.......................................... 26
2.12.1 Installing Windows 2000 / Windows XP With RAID Functions ............................................... 26
2.12.2 Installing Windows XP 64-bit With RAID Functions .........................................................26
2.13 Installing Windows 98 / ME / 2000 / XP / XP 64-bitWithout RAID Functions ................................................27
3. BIOS S3. BIOS S3. BIOS S3. BIOS S3. BIOS S ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILITY ETUP UTILITY ............................................................................................................................................................................................................. 28282828283.1 Introduction .................................................................... 28
3.1.1 BIOS Menu Bar .................................................... 283.1.2 Navigation Keys ................................................... 29
3.2 Main Screen................................................................... 293.3 Advanced Screen ......................................................... 30
3.3.1 CPU Configuration................................................ 303.3.2 Chipset Configuration .......................................... 313.3.3 ACPI Configuration ............................................... 333.3.4 IDE Configuration ................................................. 343.3.5 PCIPnP Configuration ........................................... 36
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
4/43
44444
3.3.6 Floppy Configuration ........................................... 363.3.7 Super IO Configuration ........................................ 373.3.8 USB Configuration ............................................... 38
3.4 Hardware Health Event Monitoring Screen .................. 393.5 Boot Screen ................................................................... 39
3.5.1 Boot Settings Configuration.................................. 403.5.2 Boot Device Priority............................................... 40
3.6 Security Screen ............................................................ 413.7 Exit Screen .................................................................... 42
4. Software Support4. Software Support4. Software Support4. Software Support4. Software Support .................................................................................................................................................................................................................. 43434343434.1 Install Operating System ............................................... 434.2 Support CD Information ................................................. 43
4.2.1 Running Support CD ............................................ 434.2.2 Drivers Menu ........................................................ 434.2.3 Utilities Menu ........................................................ 434.2.4 LGA 775 CPU Installation Live Demo Program .. 434.2.5 Contact Information .............................................. 43
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
5/43
55555
1.1.1 .1 .1 . Int roduction Introduction Int roduction Introduction IntroductionThank you for purchasing ASRock 775Dual-880Pro motherboard, a reliablemotherboard produced under ASRocks consistently stringent quality control. It de-livers excellent performance with robust design conforming to ASRocks commit-ment to quality and endurance.In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configurationguide to BIOS setup and information of the Support CD.
Because the motherboard specifications and the BIOS software might beupdated, the content of this manual will be subject to change withoutnotice. In case any modifications of this manual occur, the updatedversion will be available on ASRock website without further notice. Youmay find the latest memory and CPU support lists on ASRock website aswell. ASRock website http://www.asrock.com
1.1 Package Contents1.1 Package Contents1.1 Package Contents1.1 Package Contents1.1 Package Contents ASRock 775Dual-880Pro Motherboard
(ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm) ASRock 775Dual-880Pro Quick Installation Guide ASRock 775Dual-880Pro Support CD
(including LGA 775 CPU Installation Live Demo )One 80-conductor Ultra ATA 66/100/133 IDE Ribbon CableOne Ribbon Cable for a 3.5-in Floppy DriveOne Serial ATA (SATA) Cable (Optional)One Serial ATA (SATA) HDD Power Cable (Optional)One ASRock 8CH I/O
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
6/43
66666
1.2 Specifications1.2 Specifications1.2 Specifications1.2 Specifications1.2 SpecificationsPlatform: ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cmCPU: 775-Pin Socket
supporting Intel Pentium 4 / Celeron processor (in 775-land LGA package)
Chipsets : North Bridge:VIA PT880Pro, FSB @ 1066/800/533 MHz,supports Hyper-Threading Technology (see CAUTION 1 )
South Bridge:
VIA VT8237, supports USB 2.0, ATA 133, SATA 1.5Gb/sMemory: 2 DDR DIMM Slots: DDR1 and DDR2
supports PC3200 (DDR400) / PC2700 (DDR333) /PC2100 (DDR266), Max. 2GB
2 DDRII DIMM Slots: DDRII1 and DDRII2supports PCII5300 (DDRII667) / PCII4300 (DDRII533) /PCII3200 (DDRII400), Max. 2GB (see CAUTION 2 )
Dual Channel Memory Technology support (see CAUTION 3 )IDE: IDE1: ATA 133 / Ultra DMA Mode 6
IDE2: ATA 133 / Ultra DMA Mode 6Supports up to 4 IDE devices
Serial ATA: 2 SATA connectorsSupport up to 1.5Gb/s data transfer rate
Floppy Port: Supports up to 2 floppy disk drives Au di o: 7.1 channels AC97 AudioLAN: Speed: 802.3u (10/100 Ethernet), supports Wake-On-LANHardware Monitor : CPU temperature sensing
Chassis temperature sensingCPU overheat shutdown to protect CPU life(ASRock U-COP)(see CAUTION 4 )CPU fan tachometer Chassis fan tachometer Voltage monitoring: +12V, +5V, +3.3V, Vcore
PCI slots: 4 slots with PCI Specification 2.3 AGP sl ot : 1 AGP slot, supports 1.5V, 8X/4X AGP card (see CAUTION 5 )
PCI Express Graphics slot (PCI Express x 4): 1 slot with PCI Express x 4 , supports PCI Express x 16 Graphic Card (see CAUTION 6 )
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
7/43
77777
USB 2.0: 8 USB 2.0 ports:include 4 ready-to-use USB 2.0 ports on the rear panel,plus two on-board headers supporting 4 extra USB 2.0 ports(see CAUTION 7 )
ASRo ck 8CH I/O: 1 PS/2 Mouse Port, 1 PS/2 Keyboard Port1 Serial Port: COM11 Parallel Port (ECP/EPP Support)4 Ready-to-Use USB 2.0 Ports1 RJ-45 Port
Audio Jack: Rear Speaker / Side Speaker / Central/Bass /Line In / Front Speaker / Microphone(see CAUTION 8 )
BIOS: AMI BIOSSupports Plug and Play
ACPI 1.1 compliance wake up eventsSupports jumperfreeSMBIOS 2.3.1 supportCPU frequency stepless control(only for advanced users reference, see CAUTION 9 )
OS: Microsoft Windows 98SE / ME / 2000 / XP compliant
CAUTION!1. About the setting of Hyper Threading Technology, please check page 31.2. Please check the table below for the memory support frequency and its
corresponding CPU FSB frequency.CPU FSB Frequency Memory Support Frequency
1066 DDR266, DDR333, DDR400,DDRII400, DDRII533, DDRII667
800 DDR266, DDR3 33 , DDR400DDRII400, DDRII533, DDRII667
533 DDR266, DDR333, DDR400DDRII400, DDRII533, DDRII667
3. This motherboard supports Dual Channel Memory Technology. Before youimplement Dual Channel Memory Technology, make sure to read theinstallation guide of memory modules on page 18 for proper installation.
4. While CPU overheat is detected, the system will automatically shutdown.Before you resume the system, please check if the CPU fan on themotherboard functions properly and unplug the power cord, then plug itback again. To improve heat dissipation, remember to spray thermalgrease between the CPU and the heatsink when you install the PC system.
5. Do NOT use a 3.3V AGP card on the AGP slot of this motherboard!It may cause permanent damage! For the information of the compatible
AGP VGA cards, please refer to the Supported AGP VGA Card List for
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
8/43
88888
AGP Slot on pag e 9 and 10. For the proper installation of PCI ExpressVGA card, please refer to the installation guide on page 20.
6. For the information of the compatible PCI Express VGA cards, pleaserefer to the Supported PCI Express VGA Card List for PCI ExpressGraphics Slot (PCI Express x 4) on page 11. For the proper installation of PCI Express VGA card, please refer to the installation guide on page 20.
7. Power Management for USB 2.0 works fine under Microsoft Windows XPSP1 / 2000 SP4. It may not work properly under Microsoft Windows 98 /ME.
8. For microphone input, this motherboard supports both stereo and monomodes. For audio output, this motherboard supports 2-channel, 4-channel,6-channel, and 8-channel modes. Please check the table on page 13 for proper connection.
9. Although this motherboard offers stepless control, it is not recommendedto perform over-clocking. Frequencies other than the recommended CPUbus frequencies may cause the instability of the system or damage theCPU.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
9/43
99999
1. 31.31. 31.31.3 Supported AGP VGA Card List for AGP SlotSupported AGP VGA Card List for AGP SlotSupported AGP VGA Card List for AGP SlotSupported AGP VGA Card List for AGP SlotSupported AGP VGA Card List for AGP Slot(for Windows 2000/Windows XP)
I. AGP 4XGraphics Chip Model Name
Vendor n-VIDIA Inno3D GeForce 2 MX 400
ASUS V8170 ASUS V9180 Magic/TProLink GeForce 4 MX440
II. AGP 8XGraphics Chip Model Name
Vendor
n-VIDIA ALBATRON GeForce4 MX-480 Series
ASUS V9280TD ASUS V9480 AOPEN Aeolus FX5200-DV128CHAINTECH A-FX20-NLEADTEK WINFAST A340TDH
ASUS V9520-XLEADTEK Wi nFast A340PRO/TD
ASUS V9560/TD ALBATRON GeForce FX5600 SeriesLEADTEK Wi nFast A360TDInno3D GeForce FX5600
AWIN FX5700-LEGIGABYTE GV-N57L256DProLink GeForceFX 5700LE
ASUS V9570/TDMIS FX5700-TD128PixelView MGVA-NVGA35BACHAINTECH SA5900X
ASUS V9950ULTRAGIGABYTE GV-N66128DPLEADTEK WinFast A 6600GT/TDH
ALBATRON GeForce 6600GTLeadtek WinFast A6600 GT TDH
ASUS N6200LEADTEK Wi nFast A400TDH
ASUS V9999LE ASUS V9999ULTRA/2DT
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
10/43
1 01 01 01 01 0
ATI GigaCube GigaCube-R9200 128MPOWERCOLOR Radeon 9200SEConnect3D Radeon 9250POWERCOLOR Radeon 9250GECUBE Radeon 9250/128MPOWERCOLOR R95V-C3LClub3D Radeon 9550SE
ASUS A9600SESapphire ATLANTIS Radeon 9600SEGECUBE GC-R9600L (SE)FIC Radeon 9600 PRO
ASUS A9600XT/TVDSapphire ATLANTIS Radeon 9600XTPowerColor XR97-C3LPowerColor R98-SC3Club3D Radeon 9800
ASUS A9800XT ASUS X800GEXCUBE GC-RX700PGA-C3
For the latest updates of the supported AGP VGA card list for AGP slot, pleasevisit ASRock website for details.
ASRock website: http://www.asrock.com/support/index.htm
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
11/43
1 11 11 11 11 1
1. 41.41. 41.41.4 Supported PCI Express VGA Card List for PCISupported PCI Express VGA Card List for PCISupported PCI Express VGA Card List for PCISupported PCI Express VGA Card List for PCISupported PCI Express VGA Card List for PCI
Express Graphics Slot (PCI Express x 4)Express Graphics Slot (PCI Express x 4)Express Graphics Slot (PCI Express x 4)Express Graphics Slot (PCI Express x 4)Express Graphics Slot (PCI Express x 4)(for Windows 2000/Windows XP)
Graphics Chip Model NameVendor n-VIDIA ASUS EN5750
MSI PCX 5750-TD128 ASUS Extreme N5900
SPARKLE GeFORCE 6200TCLEADTEK PX6200 TC/TDH
ASUS EN6200GEGIGABYTE GV-NX62128D
ASUS EN6200 ALBATRON PC6600GT ASUS EN6600GIGABYTE GV-NX66128D
ASUS EN6800GT ASUS EN6800
ATI POWERCOLOR X300 SE ASUS EAX600XT/HTVD ABIT X600XT
ASUS EAX700PRO/TVD ASUS EAX800XLMSI X800XTGECUBE X850XT-VIVO
For the latest updates of the supported PCI Express VGA card list for PCIExpress Graphics slot (PCI Express X 4), please visit ASRock website for details.
ASRock website: http://www.asrock.com/support/index.htm
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
12/43
1 21 21 21 21 2
1.4 Motherboard Layout1.4 Motherboard Layout1.4 Motherboard Layout1.4 Motherboard Layout1.4 Motherboard Layout
1.5V_AGP1
VIAPT880Pro
Chipset
VIA
VT8237
CMOSBattery
7 . 1
C H
PCI Express Graphics
PCI 2
P C I 3
P C I 4
P C I 1
4MBBIOS
D D R I I 1 ( 6 4 / 7 2 b i t
, 2
4 0 - p
i n m
o d u l e )
D D R 1 ( 6 4 / 7 2 b i t
, 1 8 4 - p
i n m o d u l e )
D D R I I 2 ( 6 4 / 7 2 b i t
, 2
4 0 - p
i n m
o d u l e )
D D R 2 ( 6 4 / 7 2 b i t
, 1 8 4 - p
i n m o d u l e )
A T X P W R 1
775Dual-880Pro
FLOPPY1
CD1
S A T A
A T A 1 3 3
USB2.0
F S B 1 0 6 6
A G P 8 X
ATX12V1
PS2_USB_PWR11
IDE1 IDE2
GAME1PANEL 1
HDLED RESET
PLED PWRBTN
1
USB67
1
IR11
SPEAKER11
CHA_FAN1
P A R A L L E L P O R T
C O M 1
PS2Mouse
P S 2
K e y b o a r d
USB 2.0T: USB2B: USB3
USB 2.0T: USB0B: USB1
Top:RJ-45
T o p :
R E A R S P K
C e n t e r :
S I D E S P K
B o t t o m :
C T R B A S S
T o p :
L I N E I N
C e n t e r :
F R O N T
B o t t o m :
M I C I N
S u p e r
I / O
CLRCMOS1
1
AUDIO1
JR1 JL1
LANPHY
AudioCODEC
24.4cm (9.6 in)
3 0
. 5 c m ( 1 2
. 0 i n
)
USB45
1
PCIEXPRESS
D u a
l C
h a n n e
l
CPU_FAN1
SATA2SATA1
64 5 731 2
8
9
10
11
12
131415161819 1722 21 2023
24
25
26
27
2829
D D R 4 0 0 / D D R I I 6 6 7
1 PS2_USB_PWR1 Jumper 15 Chassis Fan Connector (CHA_FAN1)2 ATX 12V Connector (ATX12V1) 16 Flash Memory3 775-Pin CPU Socket 17 South Bridge Controller 4 North Bridge Controller 18 Clear CMOS Jumper (CLRCMOS1)5 CPU Fan Connector (CPU_FAN1) 19 USB 2.0 Header (USB45, Blue)6 2 x 240-pin DDRII DIMM Slots 20 USB 2.0 Header (USB67, Blue)
(Du al Ch an nel A : DDRII1, DDRII2; Yel lo w) 21 Fl op py C on nec to r (FL OPPY1)7 2 x 184-pin DDR DIMM Slots 22 Game Connector (GAME1)
(Du al Ch an nel B: DDR1, DDR2; Blu e) 23 Fr ont Pan el A udio Header (AUDIO1)8 AGP Slot (1.5V_AGP1) 24 JR1 / JL1 Jumpers9 Seco nd ar y IDE Co nn ec to r (IDE2, Bl ac k) 25 In ter nal Au di o Co nn ec to r: CD1 (B lac k)10 Primary IDE Connector (IDE1, Blue) 26 4 x PCI Slots (PCI1- 4)11 Secon dary Ser ial ATA Co nn ec to r (SATA2) 27 PCI Ex pres s Grap hics Slot (PCI Ex pres s x 4)12 Primary Serial ATA Connector (SATA1) 28 Infrared Modu le Header (IR1)13 System Panel Header (PANEL1) 29 ATX Power Connector (ATXPWR1)14 Chassis Speaker Header (SPEAKER 1)
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
13/43
1 31 31 31 31 3
1.51.51.51.51.5 ASRock 8CH I/ O ASRo ck 8CH I/O ASRock 8CH I/ O ASRo ck 8CH I/O ASRock 8CH I/ O
1 Parallel Port 8 Microphone (Pink)2 RJ-45 Port 9 USB 2.0 Ports (USB01)3 Rear Speaker (Gray) 10 USB 2.0 Ports (USB23)4 Side Speaker (Black) 11 Serial Port: COM15 Central / Bass (Orange) 12 PS/2 Keyboard Port (Purple)6 Line In (Light Blue) 13 PS/2 Mouse Port (Green)
*7 Fr on t Sp eak er ( Li me)
* If you use 2-channel speaker, please connect the speakers plug into Front Speaker Jack. See the table below for connection details in accordance with the type of speaker you use.
TABLE for Audio Output Connection Audio Output Channels Front Speaker Rear Speaker Central / Bass Side Speaker
(No. 7) (No. 3) (No. 5) (No. 4)2 V -- -- --4 V V -- --6 V V V --8 V V V V
1 2
3
4
5
6
7
8
910111213
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
14/43
1 41 41 41 41 4
Chapter 2 InstallationChapter 2 InstallationChapter 2 InstallationChapter 2 InstallationChapter 2 Installation775Dual-880Pro is an ATX form factor (12.0" x 9.6", 30.5 x 24.4 cm) motherboard.Before you install the motherboard, study the configuration of your chassis toensure that the motherboard fits into it.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so may cause physical injuries to you anddamages to motherboard components.
2.1 Screw Holes2.1 Screw Holes2.1 Screw Holes2.1 Screw Holes2.1 Screw HolesPlace screws into the holes indicated by circles to secure the motherboard to thechassis.
Do not over-tighten the screws! Doing so may damage the motherboard.
2.2 Pre-installatio n Precautions2.2 Pre-installati on Precautions2.2 Pre-installatio n Precautions2.2 Pre-installati on Precautions2.2 Pre-installati on PrecautionsTake note of the following precautions before you install motherboard componentsor change any motherboard settings.
1. Unplug the power cord from the wall socket before touching any component.
2. To avoid damaging the motherboard components due to static electricity, NEVERplace your motherboard directly on the carpet or the like. Also remember to usea grounded wrist strap or touch a safety grounded object before you handlecomponents.
3. Hold components by the edges and do not touch the ICs.4. Whenever you uninstall any component, place it on a grounded antistatic pad or
in the bag that comes with the component.
Before you install or remove any component, ensure that the power is
switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
15/43
1 51 51 51 51 5
2.3 775-LAND CPU Installation2.3 775-LAND CPU Installation2.3 775-LAND CPU Installation2.3 775-LAND CPU Installation2.3 775-LAND CPU InstallationFor the installation of Intel 775-LAND CPU,please follow the steps below.
Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket.Do not force to insert the CPU into the socket if above situation isfound. Otherwise, the CPU will be seriously damaged.
Step 1. Open the socket:Step 1-1. Disengaging the lever by depressing
down and out on the hook to clear retention tab.
Step 1-2. Rotate the load lever to fully open po-sition at approximately 135 degrees.
Step 1-3. Rotate the load plate to fully open po-sition at approximately 100 degrees.
Step 2. Insert the 775-LAND CPU:Step 2-1. Hold the CPU by the edges where are
marked with black lines.
Step 2-2. Orient the CPU with IHS (IntegratedHeat Sink) up. Locate Pin1 and the twoorientation key notches.
775-Pin Socket Overview
b l a
c k l i n
e
b l a
c k l i n
e
775-Pin Socket
Pin1alignment key alignment key
Pin1
orientationkey notch
orientationkey notch
775-LAND CPU
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
16/43
1 61 61 61 61 6
For proper inserting, please ensure to match the two orientation keynotches of the CPU with the two alignment keys of the socket.
Step 2-3. Carefully place the CPU into the socketby using a purely vertical motion.
Step 2-4. Verify that the CPU is within the socketand properly mated to the orient keys.
Step 3. Remove PnP Cap (Pick and Place Cap):Use your left hand index finger and thumb tosupport the load plate edge, engage PnP capwith right hand thumb and peel the cap from thesocket while pressing on center of PnP cap toassist in removal.
1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap.2. This cap must be placed if returning the motherboard for after service.
Step 4. Close the socket:Step 4-1. Rotate the load plate onto the IHS.Step 4-2. While pressing down lightly on load
plate, engage the load lever.Step 4-3. Secure load lever with load plate tab
under retention tab of load lever.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
17/43
1 71 71 71 71 7
2. 42.42. 42.42.4 Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink Installation of CPU Fan and Heatsink This motherboard is equipped with 775-Pin socket that supports Intel 775-LAND CPU.Please adopt the type of heatsink and cooling fan compliant with Intel 775-LAND CPUto dissipate heat. Before you installed the heatsink, you need to spray thermalinterface material between the CPU and the heatsink to improve heat dissipation.Ensure that the CPU and the heatsink are securely fastened and in good contact witheach other. Then connect the CPU fan to the CPU_FAN connector (CPU_FAN1, seepage 12, No. 5).
For proper installation, please kindly refer to the instruction manuals of your CPU fan and heatsink.
Below is an example to illustrate the installation of the heatsink for 775-LAND CPU.Step 1. Apply thermal interface material onto center
of IHS on the socket surface.
Step 2. Place the heatsink onto the socket. Ensurefan cables are oriented on side closest to theCPU fan connector on the motherboard(CPU_FAN1, see page 12, No. 5).
Step 3. Align fasteners with the motherboardthroughholes.
Step 4. Rotate the fastener clockwise, then pressdown on fastener caps with thumb to installand lock. Repeat with remaining fasteners.
If you press down the fasteners without rotating them clockwise,the heatsink cannot be secured on the motherboard.
Step 5. Connect fan header with the CPU fanconnector on the motherboard.
Step 6. Secure excess cable with tie-wrap to ensurecable does not interfere with fan operation or contact other components.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
18/43
1 81 81 81 81 8
2.5 Installation of Memory Modules (DIMM)2.5 Installation of Memory Modules (DIMM)2.5 Installation of Memory Modules (DIMM)2.5 Installation of Memory Modules (DIMM)2.5 Installation of Memory Modules (DIMM)775Dual-880Pro motherboard provides two 184-pin DDR (Double Data Rate)DIMM slots and two 240-pin DDRII DIMM slots, and supports Dual Channel MemoryTechnology. For dual channel configuration, you always need to install identi-cal (the same brand, speed, size and chip-type) DDR DIMM pair in the slots of thesame color. In other words, you have to install identical DDR DIMM pair in DualChannel A (DDRII1 and DDRII2; Yellow slots; see p.12 No.6) or identical DDRDIMM pair in Dual Channel B (DDR1 and DDR2; Blue slots; see p.12 No.7), sothat Dual Channel Memory Technology can be activated. You may refer to the
Dual Channel Memory Configuration Table below.
Dual Channel Memory Configurations
DDRII1 DDR1 DDRII2 DDR2(Yellow Slot) (Blue Slot) (Yellow Slot) (Blue Slot)
(1) Populated - Populated -(2) - Populated - Populated
1. It is not allowed to install DDR into DDRII slot or DDRII into DDRslot;otherwise, this motherboard and DIMM may be damaged.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
19/43
1 91 91 91 91 9
notch
brea k
notch
brea k
Installing a DIMMInstalling a DIMMInstalling a DIMMInstalling a DIMMInstalling a DIMM
Please make sure to disconnect power supply before adding or removing DIMMs or the system components.
Step 1. Unlock a DIMM slot by pressing the retaining clips outward.Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break
on the slot.
The DIMM only fits in one correct orientation. It will cause permanentdamage to the motherboard and the DIMM if you force the DIMM into the
slot at incorrect orientation.
Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fullysnap back in place and the DIMM is properly seated.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
20/43
2 02 02 02 02 0
2.6 Expansion Slots (PCI, AGP, and PCI Express Graphics2.6 Expansion Slots (PCI, AGP, and PCI Express Graphics2.6 Expansion Slots (PCI, AGP, and PCI Express Graphics2.6 Expansion Slots (PCI, AGP, and PCI Express Graphics2.6 Expansion Slots (PCI, AGP, and PCI Express Graphics
Slots) Slots) Slots) Slots) Slots)There are 4 PCI slots, 1 AGP slot, and 1 PCI Express Graphics slot on 775Dual-880Promotherboard.PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface. AGP sl ot : The AGP slot is used to install a graphics card. The ASRock AGP slot has
a special design of clasp that can securely fasten the inserted graphicscard. AGP slot is used to install AGP expansion cards. For the informa
tion of the compatible AGP VGA cards, please refer to the Supported AGP VGA Card List for AGP Slot on page 9 and 10.
Please do NOT use a 3.3V AGP card on the AGP slot of this motherboard!It may cause permanent damage! For the voltage information of your
AGP card, please check with the AGP card vendors.
PCI Express Graphics slot (PCI Express x 4):PCI Express Graphics slot (PCI Express x 4) is used to install PCI Expressexpansion cards. For the information of the compatible PCI Express VGAcards, please refer to the Supported PCI Express VGA Card List for PCIExpress Graphics Slot (PCI Express x 4) on page 11.
Installing an expansion cardInstalling an expansion cardInstalling an expansion cardInstalling an expansion cardInstalling an expansion cardStep 1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read thedocumentation of the expansion card and make necessary hardwaresettings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed in achassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the screwsfor later use.
Step 4. Align the card connector with the slot and press firmly until the card iscompletely seated on the slot.
Step 5. Fasten the card to the chassis with screws.Step 6. Replace the system cover.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
21/43
2 12 12 12 12 1
2.8 Jumpers Setup2.8 Jumpers Setup2.8 Jumpers Setup2.8 Jumpers Setup2.8 Jumpers SetupThe illustration shows how jumpers are
setup. When the jumper cap is placed onpins, the jumper is Short. If no jumper capis placed on pins, the jumper is Open. Theillustration shows a 3-pin jumper whose pin1and pin2 are Short when jumper cap isplaced on these 2 pins.
J u m p er Set t ingPS2_USB_PWR1 Short pin2, pin3 to enable(see p.12, No. 1) +5VSB (standby) for PS/2
or USB wake up events.Note: To select +5VSB, it requires 2 Amp and higher standby current provided
by power supply.
JR1 (see p.12, No. 24)JL1 (see p.12, No. 24)
Note: If the jumpers JL1 and JR1 are short, both the front panel and the rear panelaudio connectors can work.
Clear CMOS(CLRCMOS1, 2-pin jumper)
(see p.12, No. 18)
Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includessystem setup information such as system password, date, time, and systemsetup parameters. To clear and reset the system parameters to default setup,please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short 2 pins onCLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finishupdating the BIOS, you must boot up the system first, and then shut it downbefore you do the clear-CMOS action.
+ 5V
1 _ 2
+ 5VSB
2 _ 3
Short Open
JR1 JL1
2-pin jumper
2.7 Surround Display Feature2.7 Surround Display Feature2.7 Surround Display Feature2.7 Surround Display Feature2.7 Surround Display FeatureThanks to ASRock patented PCI Express Graphics Technology, this motherboardsupports Surround Display upgrade. With the external add-on AGP VGA card andPCI Express VGA card, you can easily enjoy the benefits of Surround Displayfeature. For the detailed instruction, please refer to the document at the followingpath in the Support CD: ..\ Surround Display
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
22/43
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
23/43
2 32 32 32 32 3
Serial ATA (SATA) Please connect the black end of Power Cable SATA power cable to the power (Optional) connector on the drive. Then
connect the white end of SATApower cable to the power connector of the power supply.
USB 2.0 Header ASRock 8CH I/O TM provides you(9-pin USB67) 4 ready-to-use USB 2.0 ports on
(see p.12, No. 20) the rear panel. If the rear USBports are not sufficient, thisUSB 2.0 header is available tosupport 2 extra USB 2.0 ports.
USB 2.0 Header ASRock 8CH I/O TM provides you(9-pin USB45) 4 ready-to-use USB 2.0 ports on(see p.12, No. 19) the rear panel. If the rear USB
ports are not sufficient, thisUSB 2.0 header is available tosupport 2 extra USB 2.0 ports.
Infrared Module Header This header supports an optional(5-pin IR1) wireless transmitting and(see p.12, No. 28) receiving infrared module.
Internal Audio Connectors These connectors allow you(4-pin CD1) to receive stereo audio input(CD1: see p.12, No. 25) from sound sources such as
a CD-ROM, DVD-ROM, TVtuner card, or MPEG card.
Front Panel Audio Header This is an interface for the front(9-pin AUDIO1) panel audio cable that allows
(see p.12, No. 23) convenient connection andcontrol of audio devices.
DUMMY
GND
+5V IRTX
IRRX
1
C D -R
G NDG ND
C D -L
CD1
USB_P W R
USB_P W R
P +7P-7
P + 6P-6
G ND
G ND
DU MMY
1
G ND
G ND
+ 5 VA BACKOUT-R
BACKOUT-L
A UD -O UT-L
A UD -O UT-RMIC-P OWER
MIC
1
connect to the SATA HDDpower connector
connect to thepower supply
USB _PWR
USB _PWR
P+5P-5
P+4P-4
GND
GND
DUMMY
1
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
24/43
2 42 42 42 42 4
System Panel Header This header accommodates(9-pin PANEL1) several system front panel(see p.12, No. 13) functions.
Chassis Speaker Header Please connect the chassis(4-pin SPEAKER 1) speaker to this header.(see p.12, No. 14)
Chassis Fan Connector Please connect the chassis fan(3-pin CHA_FAN1) cable to this connector and(see p.12, No. 15) match the black wire to the
ground pin.
CPU Fan Connector Please connect the CPU fan(4-pin CPU_FAN1) cable to this connector and(see p.12, No. 5) match the black wire to the
ground pin.
Game Connector Connect a Game cable to this(15-pin GAME1) connector if the Game port(see p.12, No. 22) bracket is installed.
ATX Power Connector Please connect an ATX power (20-pin ATXPWR1) supply to this connector.(see p.12, No. 29)
ATX 12V Connector Please note that it is necessary(4-pin ATX12V1) to connect a power supply with(see p.12, No. 2) ATX 12V plug to this connector
so that it can provides sufficientpower. Failing to do so will causethe failure to power up.
G ND+1 2 V
CHA_FAN_SP EED
MIDI_O UT
JA B2
J B Y J BB 2
MIDI_IN
+5V
JAY GND
GND
1
JAXJA B1
+5V
J B XJBB
1
+5V
+5V
DUMMY DUMMY
SPEAKER
1
GND
PWRBTN#PLED-
PLED+
DUMMY RESET#
GND
HDLED+HDLED-
1
GND+12V C PU_FAN_SPEEDN/C
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
25/43
2 52 52 52 52 5
2.10 Serial A 2.10 Serial A 2.10 Serial A 2.10 Serial A 2.10 Serial A TTTTT A (SA A (SA A (SA A (SA A (SA TTTTT A) Ha rd Di sks Instal la tion A) Hard Disks Instal la tion A) Ha rd Di sks Instal la tion A) Hard Disks Instal la tion A) Hard Disks Instal la ti onThis motherboard adopts VIA VT8237 southbridge chipset that supports Serial
ATA (SATA) hard disks and RAID functions. You may install SATA hard disks onthis motherboard for internal storage devices. This section will guide you to installthe SATA hard disks.
STEP 1: Install the SATA hard disks into the drive bays of your chassis.STEP 2: Connect the SATA power cable to the SATA hard disk.STEP 3: Connect one end of the SATA data cable to the motherboards SATA
connector.STEP 4: Connect the other end of the SATA data cable to the SATA hard disk.
2.11 Hot Plug and Hot Swap F2.11 Hot Plug and Hot Swap F2.11 Hot Plug and Hot Swap F2.11 Hot Plug and Hot Swap F2.11 Hot Plug and Hot Swap F unctions for SA unctions for SA unctions for SA unctions for SA unctions for SA TTTTT A HDDs A HDDs A HDDs A HDDs A HDDs775Dual-880Pro motherboard supports Hot Plug and Hot Swap functionsfor SATA Devices.
NOTEWhat is Hot Plug Function?If the SATA HDDs are NOT set for RAID configuration, it is called HotPlug for the action to insert and remove the SATA HDDs while the systemis still power-on and in working condition.However, please note that it cannot perform Hot Plug if the OS has been
installed into the SATA HDD.
What is Hot Swap Function?If SATA HDDs are built as RAID1 then it is called Hot Swap for the actionto insert and remove the SATA HDDs while the system is still power-onand in working condition.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
26/43
2 62 62 62 62 6
2.122.122.122.122.12 Installing Windows 2000 / Windows XP /Installing Windows 2000 / Windows XP /Installing Windows 2000 / Windows XP /Installing Windows 2000 / Windows XP /Installing Windows 2000 / Windows XP /
Windows XP 64 -b it Wi th RAID Func tions Windows XP 64 -b it Wi th RAID Functions Windows XP 64 -b it Wi th RAID Func tions Windows XP 64 -b it Wi th RAID Functions Wi ndows XP 64 -b it Wi th RAID Func tionsIf you want to install Windows 2000 / Windows XP / Windows XP-64bit OS onyour system with RAID functions, please refer to the below methods for proper installation according to the different Windows OS versions.
2.12.1 Installing Windows 2000 / Windows XP with2.12.1 Installing Windows 2000 / Windows XP with2.12.1 Installing Windows 2000 / Windows XP with2.12.1 Installing Windows 2000 / Windows XP with2.12.1 Installing Windows 2000 / Windows XP with
RAID Functions RAID Functions RAID Functions RAID Functions RAID Functions
If you want to install Windows 2000 / Windows XP OS on your SATAHDDs with RAID functions, please follow the below steps.
STEP 1: Make a SATA Driv er Diskett e. A. Insert the ASRock Support CD into your optical drive to boot your
system. B. During POST at the beginning of system boot-up, press key, and
then a window for boot devices selection appears. Please select CD- ROM as the boot device.
C. When you see the message on the screen, Do you want to generate Serial ATA driver diskette [YN]?, press .
D. Then you will see these messages,Please insert a diskette into the floppy drive.WARNING! Formatting the flop py di skette willlose ALL data in it!Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press . E. The system will start to format the floppy diskette and copy SATA
drivers into the floppy diskette. STEP 2: Use SATA RAID BIOS to set RAID con figu ratio n.
Before you start to configure the RAID function, you need to check theinstallation guide in the Support CD for proper configuration. Please refer to the document in the Support CD, Guide to SATA Hard Disks Installationand RAID Configuration, which is located in the folder at the followingpath: .. \ SATA RAID BIOS
STEP 3: Install Windows 2000 / Windows XP OS on your syst em.
After making a SATA driver diskette and using SATA RAID BIOS to setRAID configuration, you can start to install Windows 2000 / Windows XPon your system.
2.12.2 Installing Windows XP 64-bit With RAID2.12.2 Installing Windows XP 64-bit With RAID2.12.2 Installing Windows XP 64-bit With RAID2.12.2 Installing Windows XP 64-bit With RAID2.12.2 Installing Windows XP 64-bit With RAID Functions Functions Functions Functions Functions
If you want to install Windows XP 64-bit OS on your SATA HDDs with RAID functions, please follow the below steps.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
27/43
2 72 72 72 72 7
STEP 1: Make a SATA Driver Diskette. A. Insert the floppy diskette into your floppy drive. B. Copy the SATA 64-bit drivers to your floppy diskette. The SATA 64-bit drivers are located at the following path in the Support CD: .. \ 64bit SATA Driver STEP 2: Install Windows XP 64-bit OS on your system.
After making a SATA driver diskette, you can start to install Windows XP 64- bit on your system.
After the installation of Windows 2000 / Windows XP / Windows XP 64-bit OS,if you want to manage RAID functions, you are allowed to use both SATA RAIDBIOS and VIA RAID Tool for RAID configuration. Please refer to the documentin the Support CD, Guide to SATA Hard Disks Installation and RAID Configuration,which is located in the folder at the following path: .. \ SATA RAID BIOS and thedocument in the support CD, Guide to VIA RAID Tool, which is located in thefolder at the following path: .. \ VIA RAID Tool
1. Windows 98 / Windows ME does not support RAID functions.2. If you want to use VIA RAID Tool in Windows environment, please install SATA drivers from the Support CD again so that VIA RAID Tool will be installed to your system as well.
2.132.132.132.132.13 Installing Windows 98 / ME / 2000 / XP / XP 64-bitInstalling Windows 98 / ME / 2000 / XP / XP 64-bitInstalling Windows 98 / ME / 2000 / XP / XP 64-bitInstalling Windows 98 / ME / 2000 / XP / XP 64-bitInstalling Windows 98 / ME / 2000 / XP / XP 64-bit Wi th ou t RAID Fu nc ti on s Wi thou t RAID Fu nc ti ons Wi th ou t RAID Fu nc ti on s Wi thou t RAID Fu nc ti ons Wi th ou t RAID Fu nc ti ons
If you want to install Windows 98 / ME / 2000 / XP / XP 64-bit on your SATA HDDswithout RAID functions or you want to install Windows 98 / ME / 2000 / XP / XP
64-bit on your IDE HDDs instead of SATA HDDs, please follow the below steps.
STEP 1: Set Up BIOS. (Only fo r Wind ows 2000 / XP / XP 64-bit) A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the SATA Operation Mode option from [RAID] to [non-RAID].
STEP 2: Install Windows 98 / ME / 2000 / XP / XP 64-bit OS on your system.
After setting up BIOS, you can start to install Windows 98 / ME / 2000 / XP / XP64-bit on your system.
If you dont want to set up RAID functions, there is no need to make a SATAdriver diskette.
If you want to install Windows 98 / Windows ME on your SATA HDDs without RAID functions, you dont have to set up BIOS. Please install Windows 98 / Windows ME OS on your system directly.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
28/43
2 82 82 82 82 8
3.3 .3 .3 .3 . BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY BIOS SETUP UTILITY 3.1 Introduction3.1 Introduction3.1 Introduction3.1 Introduction3.1 IntroductionThis section explains how to use the BIOS SETUP UTILITY to configure your system.The Flash Memory on the motherboard stores the BIOS SETUP UTILITY. You may runthe BIOS SETUP UTILITY when you start up the computer. Please press duringthe Power-On-Self-Test (POST) to enter the BIOS SETUP UTILITY, otherwise, POSTwill continue with its test routines.If you wish to enter the BIOS SETUP UTILITY after POST, restart the system by
pressing + + , or by pressing the reset button on the systemchassis. You may also restart by turning the system off and then back on.
Because the BIOS software is constantly being updated, the followingBIOS setup screens and descriptions are for reference purpose only,
and they may not exactly match what you see on your screen.
3.1.13.1.13.1.13.1.13.1.1 BIOS Menu BarBIOS Menu BarBIOS Menu BarBIOS Menu BarBIOS Menu BarThe top of the screen has a menu bar with the following selections:Main To set up the system time/date information
Advan ced To set up the advanced BIOS features
H/W Monitor To display current hardware statusBoot To set up the default system device to locate and load the
Operating SystemSecurity To set up the security featuresExit To exit the current screen or the BIOS SETUP UTILITYUse < > key or < > key to choose among the selections on the menu bar,and then press to get into the sub screen.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
29/43
2 92 92 92 92 9
3.1.23.1.23.1.23.1.23.1.2 Navigation KeysNavigation KeysNavigation KeysNavigation KeysNavigation KeysPlease check the following table for the function description of each navigationkey.
Nav i gat i on Key (s ) Fu n ct i o n Desc r ip t io n / Moves cursor left or right to select Screens / Moves cursor up or down to select items + / - To change option for the selected items To bring up the selected screen
To display the General Help Screen To load optimal default values for all the settings To save changes and exit the BIOS SETUP UTILITY To jump to the Exit Screen or exit the current screen
3. 23.23. 23.23.2 Main ScreenMain ScreenMain ScreenMain ScreenMain ScreenWhen you enter the BIOS SETUP UTILITY, the Main screen will appear and displaythe system overview
System Time [Hour:Minute:Second]Use this item to specify the system time.
Syst em Date [Day Month /Date/Year]Use this item to specify the system date.
BIOS SETUP UTILITY
Main Advanced H/W Monitor Boot Security Exit
System Overview
System TimeSystem Date
[ :00:09][Tue 02/01/2005]
Use [Enter], [TAB]or [SHIFT-TAB] toselect a field.
Use [+] or [-] toconfigure system Time.
Select ScreenSelect Item
+ - C ha ng e F ie ldTab Se lec t F ieldF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
BIOS VersionProcessor TypeProcessor SpeedMicrocode Update
Total Memory
DIMMII 1DIMM 1
Cache Size
DIMMII 2DIMM 2
: 775Dual-880Pro BIOS P1.00: Intel (R) CPU 3.20 GHz: 3200 MHz:: 1024KB
: 512MB
:::
F34/14
Dual-Channel Memory ModeNone256MB/166MHz (DDR333)None
: 256MB/166MHz (DDR333)
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
17
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
30/43
3 03 03 03 03 0
3.33. 33.33. 33.3 Advanced Sc reen Advanced Sc reen Advanced Sc reen Advanced Sc reen Advanced Sc reenIn this section, you may set the configurations for the following items: CPUConfiguration, Chipset Configuration, ACPI Configuration, IDE Configuration, PCIPnPConfiguration, Floppy Configuration, SuperIO Configuration, and USB Configuration.
Setting wrong values in this section may causethe system to malfunction.
3.3.13.3.13.3.13.3.13.3.1 CPU ConfigurationCPU ConfigurationCPU ConfigurationCPU ConfigurationCPU Configuration
CPU Host FrequencyWhile entering setup, BIOS auto detects the present CPU host frequency of this motherboard. The actual CPU host frequency will show in the followingitem.
Spread SpectrumThis item should always be [Disabled] for better system stability.
BIOS SETUP UTILITYMain H/W Monitor Boot Security Exit
Advanced Settings
WARNING : Setting wrong values in below sectionsmay cause system to malfunction.
Configure CPU
Select ScreenSelect Item
Enter Go to Sub ScreenF 1 G en er al H el pF 9 L oa d D ef au lt sF 10 S av e a nd Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
CPU ConfigurationChipset Configuration
IDE ConfigurationPCIPnP ConfigurationFloppy ConfigurationSuperIO ConfigurationUSB Configuration
ACPI Configuration
BIOS SETUP UTILITY
CPU Configuration
Actual Frequency (MHz)
Select how to set theCPU host frequency.
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
CPU Host Frequency[133][Auto]
Spread Spectrum [Disabled]
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
Ratio StatusRatio Actual Value
CPU Thermal Throttling
Hyper Threading Technology
[Enabled]
[Auto]
: Locked: 18
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
31/43
3 13 13 13 13 1
Ratio StatusThis is a read-only item, which displays whether the ratio status of thismotherboard is Locked or Unlocked. If it shows Unlocked, you will findan item Ratio CMOS Settin g appears to allow you changing the ratio valueof this motherboard. If it shows Locked, then the item Ratio CMOS Set-ting will be hidden. If you use the ratio value to time the CPU frequency, it willbe equal to the core speed of the installed processor.
Ratio Actual ValueThis is a read-only item, which displays the ratio actual value of this
motherboard.CPU Thermal Throttling
You may select [Enabled] to enable P4 CPU internal thermal control mecha-nism to keep the CPU from overheated.
Hyper Threading TechnologyTo enable this feature, it requires a computer system with an Intel Pentium 4processor that supports Hyper-Threading technology and an operating sys-tem that includes optimization for this technology, such as Microsoft Win-dows XP. Set to [Auto] if using Microsoft Windows XP, or Linux kernelversion 2.4.18 or higher. This option will be hidden if the installed CPU doesnot support Hyper-Threading technology.
3.3.23.3.23.3.23.3.23.3.2 Chipset ConfigurationChipset ConfigurationChipset ConfigurationChipset ConfigurationChipset Configuration
DRAM FrequencyIf [Auto] is selected, the motherboard will detect the memory module(s)inserted and assigns appropriate frequency automatically. You may alsoselect other value as operating frequency: [133MHz (DDR 266)],[166MHz (DDR 333)], [200MHz (DDR 400)] for DDR; [200MHz (DDRII 400)],[266MHz (DDRII 533)] for DDRII.
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Chipset Configuration
DRAM FrequencyFlexibility OptionDRAM CAS# LatencyDRAM Command RateDRAM Bus Selection
DRAM VoltageAGP Voltage
Primary Graphics AdapterAGP Aperture SizeAGP ModeAGP Fast Write
PCI Delay TransactionOnBoard LANOnBoard AC'97 Audio
[Disabled]
[Auto]
[Normal][High]
[PCI][64MB][Auto][Disabled]
[Auto]
[Auto][2T Command]
[Disabled][Eabled]
[Auto]
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el p
F10 Save and Ex itE SC E xi t
F 9 L oa d D ef au lt s
Options
133MHz (DDR266)166MHz (DDR333)200MHz (DDR400)Auto
Advanced
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
32/43
3 23 23 23 23 2
Flexibility OptionThe default value of this option is [Disabled]. It will allow better tolerance for memory compatibility when it is set to [Enabled].
DRAM CAS# LatencyUse this item to adjust the means of memory accessing. Configurationoptions: [Auto], [2.5], [2], and [3] for DDR; [Auto], [3], [4], [5] for DDRII.
DRAM Command RateUse this to select among [2T Command] and [1T Command] for DRAMCommand Rate. The default value is [2T Command].
DRAM Bus SelectionThe default value is [Auto], which will automatically select the proper ac-cess mode for the system. You may select between [Single Channel] and[Dual Channel] if you have properly set the dual channel memoryconfiguration.
DRAM Volt ageUse this to select among [Normal] and [High] for DRAM Voltage. The defaultvalue is [Normal].
AGP Vol tageUse this to select among [Normal] and [High] for AGP Voltage. The defaultvalue is [High].
Primary Graphics Adapter This allows you to select [PCI], [AGP], or [PCI-Express] as the primarygraphics adapter. The default vaule is [PCI].
AGP Apert ur e Si zeIt refers to a section of the PCI memory address range used for graphicsmemory. It is recommended to leave this field at the default value unless theinstalled AGP cards specifications requires other sizes.
AGP Mo deThe default value of this feature is set to [Auto]. If you install an 8X-AGPcard on this motherboard, you may select [Auto], [8X] or [4X] as the AGPmode. If the installed AGP card is a 4X-AGP card, then you may set the AGPmode as [Auto], [4X], [2X], or [1X].
AGP F ast Wri teThis allows you to enable or disable the feature of AGP fast write protocol
support.PCI Delay Transacti on
Enable PCI Delay Transaction feature will free the PCI Bus when the CPU isaccessing 8-bit ISA cards. Disable this feature when using ISA cards thatare not PCI 2.1 compliant.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
33/43
3 33 33 33 33 3
OnBoard LANThis allows you to enable or disable the onboard LAN feature.
OnBoard AC97 AudioSelect [Auto], [Enabled] or [Disabled] for the onboard AC97 Audio feature.If you select [Auto], the onboard AC97 Audio will be disabled when PCISound card is plugged.
3.3.33.3.33.3.33.3.33.3.3 AC PI Co nf ig ur at io n ACPI Co nf ig ur at io n AC PI Co nf ig ur at io n ACPI Co nf ig ur at io n AC PI Co nf ig ur at io n
Restore on AC/Power LossUse this item to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains off when the power recovers. If [Power On] is selected, the AC/power resumes and the sys-tem starts to boot up when the power recovers.
Ring-In Power OnUse this item to enable or disable Ring-In signals to turn on the system fromthe power-soft-off mode.
PCI Devices Power OnUse this item to enable or disable PCI devices to turn on the system from thepower-soft-off mode.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system fromthe power-soft-off mode.
RTC Alarm Power OnUse this item to enable or disable RTC (Real Time Clock) to power on thesystem.
BIOS SETUP UTILITY
ACPI Configuration Select auto-detect ordisable the STR feature.
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Suspend To RAM
Restore on AC / Power LossRing-In Power OnPCI Devices Power OnPS / 2 Keyboard Power OnRTC Alarm Power On
[Disabled]
[Power Off][Disabled][Disabled][Disabled][Disabled]
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
34/43
3 43 43 43 43 4
3.3.43.3.43.3.43.3.43.3.4 IDE ConfigurationIDE ConfigurationIDE ConfigurationIDE ConfigurationIDE Configuration
OnBoard IDE Controller Use this item to enable or disable the onboard IDE controller.
SATA Operation ModeUse this item to adjust SATA Operation Mode. The default value of thisoption is [RAID]. If you dont want to operate RAID function on SATA HDDs,please select [non-RAID]. However, if you want to install Windows 98/MEwithout RAID functions, please still select [RAID].
IDE Device ConfigurationYou may set the IDE configuration for the device that you specify. We willuse the Primary IDE Master as the example in the following instruction,which can be applied to the configurations of Primary IDE Slave, Sec-ondary IDE Master, and Secondary IDE Slave as well.
BIOS SETUP UTILITY
IDE Configuration
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
OnBoard IDE Controller
Primary IDE MasterPrimary IDE SlaveSecondary IDE MasterSecondary IDE Slave
[Both]
[Hard Disk][Not Detected][Not Detected][Not Detected]
Select Screen
Select Item+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
Select Screen
Select Item+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
DISABLED: disables theintegrated IDEController.PRIMARY: enables onlythe Primary IDEController.SECONDARY: enablesonly the Secondary IDEController.BOTH: enables both IDEControllers.
SATA Operation Mode [RAID]
BIOS SETUP UTILITY
Primary IDE Master Select the typeof device connectedto the system.
Select ScreenSelect Item+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
TypeLBA/Large ModeBlock (Multi-Sector Transfer)PIO ModeDMA ModeS . M .A . R . T .32Bit Data Transfer
[Auto][Auto][Auto][Auto][Auto][Disabled][Disabled]
DeviceVendorSizeLBA ModeBlock ModePIO ModeAsync DMAUltra DMAS.M.A.R.T.
:Hard Disk :ST340014A:40.0 GB:Supported:16Sectors:4:MultiWord DMA-2:Ultra DMA-5:Supported
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
35/43
3 53 53 53 53 5
TYPEUse this item to configure the type of the IDE device that you specify.Configuration options: [Not Installed], [Auto], [CD/DVD], and [ARMD].[Not Installed]: Select [Not Installed] to disable the use of IDE device.[Auto]: Select [Auto] to automatically detect the hard disk drive.
After selecting the hard disk information into BIOS, use a diskutility, such as FDISK, to partition and format the new IDE harddisk drives. This is necessary so that you can write or readdata from the hard disk. Make sure to set the partition of thePrimary IDE hard disk drives to active.
[CD/DVD]: This is used for IDE CD/DVD drives.[ARMD]: This is used for IDE ARMD (ATAPI Removable Media Device),
such as MO.LBA/Large Mode
Use this item to select the LBA/Large mode for a hard disk > 512 MB under DOS and Windows; for Netware and UNIX user, select [Disabled] todisable the LBA/Large mode.
Block (Multi-Sector Transfer)The default value of this item is [Auto]. If this feature is enabled, it willenhance hard disk performance by reading or writing more data during
each transfer.PIO Mode
Use this item to set the PIO mode to enhance hard disk performance byoptimizing the hard disk timing.
DMA ModeDMA capability allows the improved transfer-speed and data-integrity for compatible IDE devices.
S.M.A.R.T.Use this item to enable or disable the S.M.A.R.T. (Self-Monitoring, Analysis,and Reporting Technology) feature. Configuration options: [Disabled], [Auto],[Enabled].
32-Bit Data Transfer
Use this item to enable 32-bit access to maximize the IDE hard disk datatransfer rate.
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
36/43
3 63 63 63 63 6
3.3.53.3.53.3.53.3.53.3.5 PCIPnP ConfigurationPCIPnP ConfigurationPCIPnP ConfigurationPCIPnP ConfigurationPCIPnP Configuration
PCI Latency Timer The default value is 32. It is recommended to keep the default value unlessthe installed PCI expansion cards specifications require other settings.
PCI IDE BusMaster Use this item to enable or disable the PCI IDE BusMaster feature.
3.3.63.3.63.3.63.3.63.3.6 Floppy ConfigurationFloppy ConfigurationFloppy ConfigurationFloppy ConfigurationFloppy Configuration
In this section, you may configure the type of your floppy drive.
BIOS SETUP UTILITY
PCI / PnP Configuration Value in units of PCIclocks for PCI devicelatency timerregister.
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF 10 S av e a nd Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
PCI Latency TimerPCI IDE BusMaster
[32][Enabled]
Advanced
BIOS SETUP UTILITY
Floppy Configuration Select the type of floppy driveconnected to thesystem.
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Floppy AFloppy B
[1.44 MB 3 "][Disabled]
12
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
37/43
3 73 73 73 73 7
3.3.73.3.73.3.73.3.73.3.7 Super IO ConfigurationSuper IO ConfigurationSuper IO ConfigurationSuper IO ConfigurationSuper IO Configuration
OnBoard Floppy Controller Use this item to enable or disable floppy drive controller.
Serial Port AddressUse this item to set the address for the onboard serial port or disable it.Configuration options: [Disabled], [3F8 / IRQ4], [2F8 / IRQ3], [3E8 / IRQ4],[2E8 / IRQ3].
Infrared Port Address
Use this item to set the address for the onboard infrared port or disable it.Configuration options: [Disabled], [2F8 / IRQ3], and [2E8 / IRQ3].
Parallel Port AddressUse this item to set the address for the onboard parallel port or disable it.Configuration options: [Disabled], [378], and [278].Parallel Port Mode
Use this item to set the operation mode of the parallel port. The defaultvalue is [ECP+EPP]. If this option is set to [ECP+EPP], it will show the EPPversion in the following item, EPP Version. Configuration options:[Normal], [Bi-Directional], and [ECP+EPP].EPP Version
Use this item to set the EPP version. Configuration options: [1.9]and [1.7].
ECP Mode DMA ChannelUse this item to set the ECP mode DMA channel. Configurationoptions: [DMA0], [DMA1], and [DMA3].
Parallel Port IRQUse this item to set the IRQ for the parallel port. Configuration options:[IRQ5] and [IRQ7].
BIOS SETUP UTILITY
Configure Super IO Chipset Allow BIOS to Enableor Disable FloppyController.
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
OnBoard Floppy ControllerSerial Port AddressInfrared Port AddressParallel Port Address
Parallel Port ModeEPP VersionECP Mode DMA Channel
Parallel Port IRQOnBoard Game PortOnBoard MIDI Port
[Enabled][3F8 / IRQ4][Disabled][378][ECP+ EPP][1.9][DMA3][IRQ7][Enabled][Disabled]
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
38/43
3 83 83 83 83 8
OnBoard Game PortUse this item to enable the Game Port or disable it.
OnBoard MIDI PortUse this itme to select the address for the MIDI Port or disable it. Configura-tion options: [Disabled], [300], and [330].
3.3.83.3.83.3.83.3.83.3.8 USB ConfigurationUSB ConfigurationUSB ConfigurationUSB ConfigurationUSB Configuration
USB Controller Use this item to enable or disable the use of USB controller.
USB 2.0 SupportUse this item to enable or disable the USB 2.0 support.
Legacy USB SupportUse this item to enable or disable the support to emulate legacy I/Odevices such as mouse, keyboard,... etc. Or you may select [Auto] sothat the system will start to auto-detect; if there is no USB deviceconnected, Auto option will disable the legacy USB support.
BIOS SETUP UTILITY
USB Configuration To enable or disablethe onboard USBcontrollers.
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, Ameri can Megatrends, Inc.
Advanced
USB ControllerUSB 2.0 SupportLegacy USB Support
[Enabled][Enabled][Disabled]
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
39/43
3 93 93 93 93 9
3. 43.43. 43.43.4 Hardware Health Event Monitoring ScreenHardware Health Event Monitoring ScreenHardware Health Event Monitoring ScreenHardware Health Event Monitoring ScreenHardware Health Event Monitoring ScreenIn this section, it allows you to monitor the status of the hardware on your system,including the parameters of the CPU temperature, motherboard temperature, CPU fanspeed, chassis fan speed, and the critical voltage.
3. 53.53. 53.53.5 Boot ScreenBoot ScreenBoot ScreenBoot ScreenBoot ScreenIn this section, it will display the available devices on your system for you to config-ure the boot settings and the boot priority.
BIOS SETUP UTILITY
Hardware Health Event Monitoring
Select ScreenSelect Item
F 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
CPU TemperatureM / B Temperature
CPU Fan SpeedChassis Fan Speed
Vcore+ 3.30V+ 5.00V+ 12.00V
: 37 C / 98 F
: 2463 RPM: N / A
: 1.629V: 3.306V: 5.067V: 11.890V
: 31 C / 87 F
M ai n A dv an ce d Boot Security ExitH/W Monitor
BIOS SETUP UTILITYMa in Ad va nc ed H /W M oni to r S ec ur it y E xi t
Boot Settings Configure Settingsduring System Boot.
Select ScreenSelect Item
Enter Go to Sub ScreenF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Boot
Boot Settings Configuration
Boot Device PriorityRemovable Drives
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
40/43
4 04 04 04 04 0
3.5.13.5.13.5.13.5.13.5.1 Boot Settings ConfigurationBoot Settings ConfigurationBoot Settings ConfigurationBoot Settings ConfigurationBoot Settings Configuration
Boot From NetworkUse this item to enable or disable the Boot From Network feature.
VIA SATA Raid Utili ty Use this to enable or disable VIA VT8237 SATA Raid BIOS Utility during POST.
Boot Up Num-LockIf this item is set to [On], it will automatically activate the Numeric Lockfunction after boot-up.
3.5.23.5.23.5.23.5.23.5.2 Boot Device PriorityBoot Device PriorityBoot Device PriorityBoot Device PriorityBoot Device PriorityIn this section, you may specify the boot sequence from the available devicesin your system.
Likewise, you may also specify the boot sequence from the available devicesfor the hard disk drives, the removable drives, and the CD/DVD drives.
BIOS SETUP UTILITY
Boot Settings Configuration To enable or disable theboot from network feature.
Select ScreenSelect Item
+ - C ha ng e O pt io nF 1 G en er al H el pF 9 L oa d D ef au lt sF10 Save and Ex itE SC E xi t
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Boot
Boot From Network VIASATARaid UtilityBootup Num-Lock
[Disabled][Enabled][On]
BIOS SETUP UTILITY
Boot Device Priority Specifies the bootsequence from theavailable devices.
A device enclosed inparenthesis has beendisabled in thecorresponding typemenu.
Select ScreenSelect Item+ - C ha ng e O pt io nF 1 G en er al H el p
F 10 S av e a nd Ex itE SC E xi t
F 9 L oa d D ef au lt s
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
1st Boot Device2nd Boot Device3rd Boot Device
[1st FLOPPY DRIVE][HDD: PM-MAXTOR 6L08][CD / DVD]
Boot
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
41/43
4 14 14 14 14 1
3. 63.63. 63.63.6 Security ScreenSecurity ScreenSecurity ScreenSecurity ScreenSecurity ScreenIn this section, you may set or change the supervisor/user password for the system.For the user password, you may also clear it.
BIOS SETUP UTILITYMain Advanced H/W Monitor Boot Exit
Install or Change thepassword.
Select ScreenSelect Item
Enter ChangeF 1 G en er al H el p
F 10 S av e a nd Ex itE SC E xi t
F 9 L oa d D ef au lt s
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Security
Change Supervisor PasswordChange User Password
Clear User Password
Security Settings
Supervisor Password : Not InstalledU se r P as sw or d : N ot I ns ta ll ed
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
42/43
4 24 24 24 24 2
3.73. 73.73. 73.7 Exit ScreenExit ScreenExit ScreenExit ScreenExit Screen
Save Changes and ExitWhen you select this option, it will pop-out the following message, Saveconfiguration changes and exit setup? Select [OK] to save the changesand exit the BIOS SETUP UTILITY.
Discard Changes and ExitWhen you select this option, it will pop-out the following message, Dis-card changes and exit setup? Select [OK] to exit the BIOS SETUP UTILITYwithout saving any changes.
Discard ChangesWhen you select this option, it will pop-out the following message, Dis-card changes? Select [OK] to discard all changes.
Load Optimal DefaultsWhen you select this option, it will pop-out the following message, Loadoptimal defaults? Select [OK] to load the default values for all the setupconfigurations.
BIOS SETUP UTILITYMain Advanced H/W Monitro Boot Security
Exit system setupafter saving thechanges.
F10 key can be usedfor this operation.
Select ScreenSelect Item
Enter Go to Sub ScreenF 1 G en er al H el p
F 10 S av e a nd Ex itE SC E xi t
F 9 L oa d D ef au lt s
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Exit
Save Changes and ExitDiscard Changes and ExitDiscard Changes
Load Optimal Defaults
Exit Options
-
8/13/2019 ASROCK Motherboard 775Dual 880Pro English User Manual
43/43
4 34 34 34 34 3
Chapter 4 Software Suppor Chapter 4 Software Suppor Chapter 4 Software Suppor Chapter 4 Software Suppor Chapter 4 Software Suppor t t t t t 4 . 14 . 14 . 14 . 14 . 1 Install Operating SystemInstall Operating SystemInstall Operating SystemInstall Operating SystemInstall Operating SystemThis motherboard supports various Microsoft Windows operating systems: 98 SE / ME / 2000/ XP. Because motherboard settings and hardware options vary, use the setup procedures in thischapter for general reference only. Refer to your OS documentation for more information.
4 . 24 . 24 . 24 . 24 . 2 S u pp or t C D I n fo rm a ti onSupport CD InformationSupport CD InformationSupport CD InformationSupport CD InformationThe Support CD that came with the motherboard contains necessary drivers and useful utilitiesthat enhance the motherboard features.
4 .2 .14 .2 .14 .2 .14 .2 .14 .2 .1 Running The Support CDRunning The Support CDRunning The Support CDRunning The Support CDRunning The Support CDTo begin using the support CD, insert the CD into your CD-ROM drive. The CD automati-cally displays the Main Menu if AUTORUN is enabled in your computer. If the MainMenu did not appear automatically, locate and double click on the file ASSETUP.EXEfrom the BIN folder in the Support CD to display the menus.
4 .2 .24 .2 .24 .2 .24 .2 .24 .2 .2 Drivers MenuDrivers MenuDrivers MenuDrivers MenuDrivers MenuThe Drivers Menu shows the available devices drivers if the system detects installeddevices. Please install the necessary drivers to activate the devices.
4 .2 .34 .2 .34 .2 .34 .2 .34 .2 .3 Util i t ies MenuUtil i t ies MenuUtil i t ies MenuUtil i t ies MenuUtil i t ies MenuThe Utilities Menu shows the applications software that the motherboard supports. Click ona specific item then follow the installation wizard to install it.
4 .2 .44 .2 .44 .2 .44 .2 .44 .2 .4 LGA 775 CPU Installation Live Demo ProgramLGA 775 CPU Installation Live Demo ProgramLGA 775 CPU Installation Live Demo ProgramLGA 775 CPU Installation Live Demo ProgramLGA 775 CPU Installation Live Demo ProgramThis motherboard is equipped with Intel LGA 775 socket, which is a new CPU socketinterface that Intel has released. Since it has several tiny pins, whcih are easily to bedamaged by improper handling, ASRock sincerely presents you a clear installation guidethrough this LGA 775 CPU Installation Live Demo. We hope you may check this livedemo program before you start the installation of LGA 775 CPU in order to reduce the risksof CPU and motherboard damages caused by any improper handling. To see this LiveDemo, you can run Microsoft Media Player to play the file. You may find this Live Demoin the motherboards Support CD through the following path:..\ MPEGAV \ LGA775INST.DAT
4 .2 .54 .2 .54 .2 .54 .2 .54 .2 .5 Contact In format ionContact In format ionContact In format ionContact In format ionContact In format ionIf you need to contact ASRock or want to know more about ASRock, welcome to visit
ASRocks website at http://www.asrock.com; or you may contact your dealer for further information.