asme codes - an insight
TRANSCRIPT
-
7/27/2019 ASME Codes - An Insight
1/5
Date: 28th May 2013
Dear Sir / Madam,
In globalization, International certifications are playing a very important role in developing confidence atcustomers end. For example, ASME certification (U, U2, R, S, N Stamps etc.) is considered a hallmarkin quality of fabricated equipments.Many of us use ASME Codes extensively. We design, manufacture, inspect, test, and evaluateas per the Code. We interpret the Code or get it interpreted so as to be totally compliant tothe code and our customer requirements. Interpreting the code or getting to know the changes in thecode requires a lot of effort. This could be a specialized job and may require a long time. But wedefinitely do not have that time with us! We are supposed to get to know the changes, understand the
implications and do our best in implementing the changes, all in a short while.After all, the job, and in turn the customer is at stake!
We understand these issues as we are constantly in touch with the market, the customersand also the Code. Keeping all the issues in mind, we have organized a Training Program onASME Codes An Insight. This will mainly cover ASME Section VIII Div.1, ASME Section II, ASMESection IX and ASME Section V.The details of the Program are given in the following pages.
The program shall be of use to Designers, Shop personnel, QC personnel, NDE personnel,Purchasers, Consultants, Third Party Inspectors and any person using the Code.The intention is to take an overall review of the Code, with specific emphasis on changes in addenda2011.
Needless to say, it will be more interactive with queries from participants.
We are very sure this will be of great importance to you and your organization, and are looking forwardto meeting you at the seminar!
Thanking you,
Yours faithfully,
Diwakar Joshi
Managing Director
Insight Global FZEP.O. Box no. 4422Fujairah, U.A.E.
Mobile (+971) 0563016586, 0563478926Phone 09-2283556
E mail [email protected]
-
7/27/2019 ASME Codes - An Insight
2/5
INSIGHT GLOBAL FZE
Presents
Program details:
Date Session Fees
6th July 2013 Sec.VIII Div.1, Sec. II AED 8007th July 2013 Sec.V, Sec IX AED 800
Note Candidates can enroll for either of these two training sessions. Feesapplicable for those wishing to enroll for both training sessions shall beAED 1200.
ASME Codes An Insight
Training Program[ASME Sec VIII Div.1, ASME Sec IX, ASME Sec V, ASME
Sec II Edition 2010 Addenda 2011a]
Venue:
Oasis Court Hotel Apartments,
Off Bank Street,
(first exit from First Gulf Bank,
about 500 meters from exit)
Bur Dubai,
U.A.E.
Ph: +971 4 397 6666
-
7/27/2019 ASME Codes - An Insight
3/5
About the Faculty:
Diwakar D. Joshi
Director - Insight Quality Services and Insight Global FZE.B.E. (Mechanical) with first class (distinction) having more than 36 years experience in QA/QC and NDT
field with well-known organizations like Walchandnagar Industries Ltd., Alfa Laval India Ltd., PT.Puspetindo, Indonesia and PT. Balcke-Durr Indonesia.
Qualified ASNTLevel III -RT+UT+MT+PT+VT+LT+ET - (Certificate No. 60893). ACCP Level III in (RT+PT+MT+UT+VT). RWTUV Certified EN 473 Level III (RT+UT+MT+PT). Senior Certified Welding Inspector of American Welding Society. API 510 Certified Pressure Vessel Inspector
API 653 above ground storage tank inspectorAPI 570 Piping inspector andAPI 571, API 577 and API 580 Authorized Inspector.API 936 Refractory Practitioner.
Qualified Lead Assessor (ISO 9000) by P. E. Batala, UK, and provisional Assessor from CQA
London.
Member of British Institute of NDT (BINDT), American Welding Society (AWS), American Society for Non-Destructive Testing (ASNT), American Society of Metals (ASM), Singapore Welding Society (SWS), Indian Society for Non-Destructive Testing (ISNT) , National Certification Board (NCB- ISNT)
Has conducted training courses in India, Bangkok (Thailand), Qatar, Bahrain, Saudi Arabia,Indonesia etc.
Has trained and certified more than 6000 QA/QC Personnel. (conducted more than 550 trainingprograms in Welding, Quality Control, NDT, ISO 9000, and ASME Codes in last 18 years).
Has hands-on Experience of Quality Control and Quality Assurance of Pressure Vessels and HeatExchangers, ASME U, U2 and N Stamp Vessels.
NDT Level III for reputed fabrication companies. Has worked for shut down inspection in Saudi Arabia and off-shore platform inspection in Middle
East. Has worked as a Vice Chairman of ISNT-Pune Chapter and conducted NDT Examiners workshop in
Pune. Was Course Director for ASNT Level III examinations in Pune. Has worked as a Monitor for the ASNT Level III examinations. Has presented papers in National and International seminars in NDT. Approved NDT Examiner by National Certification Board ISNT.
Insight Quality Services is already accredited by NCB-ISNT.
Insight Global FZE is recently established to give exclusive services to U.A.E.
-
7/27/2019 ASME Codes - An Insight
4/5
Program Outline:
6th July 2013Session 1 (9 am to 11 am)
Welcome & Introduction
Benchmark
Intro to ASME Codes
ASME Sect. VIII Div. 1: UG General Requirements
Tea Break (11 am to 11.15 am)
Session 2 (11.15 am to 1 pm)
ASME Sect. VIII Div. 1: UW: Welding Requirements
ASME Sect. VIII Div. 1: Requirements by Material
Lunch Break (1 pm to 2 pm)
Session 3 (2 pm to 3.30 pm)
ASME Sect. VIII Div. 1: PWHT and Impact testing
ASME Sect. VIII Div. 1: Fabrication, Inspection, Examination &Testing
Tea Break (3.30 pm to 3.45 pm)
Session 4 (3.45 pm to 5.30 pm)
ASME Section II Part A and C
Materials and consumable Specifications
7th July 2013Session 1 (9 am to 11 am)
Welcome & Introduction
Benchmark
Intro to ASME Codes (Brief)
ASME Sect. IX: General Requirements
Tea Break (11 am to 11.15 am)
Session 2 (11.15 am to 1 pm)
ASME Sect. IX: Welding Procedure Specification
ASME Sect. IX: Procedure Qualification Record
Lunch Break (1 pm to 2 pm)
Session 3 (2 pm to 3.30 pm)
ASME Sect. IX: Welder's Performance Qualification
ASME Sect. V: Introduction to Non destructive Examination
Tea Break (3.30 pm to 3.45 pm)
Session 4 (3.45 pm to 5.30 pm)
ASME Sect. V: Visual Testing, Penetrant Testing, MagneticParticle Testing
ASME Sect. V: Radiographic Testing, Ultrasonic Testing
-
7/27/2019 ASME Codes - An Insight
5/5
Enrollment Form(For more than one registration, please use photocopies)
Two days Program on ASME Codes An Insight (Sec IX, Sec V, Sec VIII Div. 1, Sec II)
6th
& 7th
July 2013.
Please register the following person for the ASME Codes An Insight course for:(Please check the appropriate box)
Sec.VIII Div.1, Sec. II only (6th July) - AED 800
Sec.V, Sec IX only (7th July) - AED 800
Both Sessions (6th & 7th July) - AED 1200
Name : ..................................
Designation : ......................
Organization : ....................
Address : ..............................
..................................
..
Contact Details:
E-mail : ......................................
----------------------------------------------------------------------------------------------------------------------------------------------Payment details
Mode of payment : Cash / Cheque, (Cheque to be drawn in the name of Insight Global FZE)
Amount : AED ..
Cheque No. & date : ..............................
Bank : ................................................................................................................................----------------------------------------------------------------------------------------------------------------------------------------------
Authorized Signature ..................(with Name and seal)
Please mail the completed registration form [email protected]
Insight Global FZEP.O. Box no. 4422Fujairah, U.A.E.Mobile (+971) 0563016586, 0563478926Phone 09-2283556E mail [email protected]
Contact Person: Mr. Mungel