Ashmore Hall Auditorium --- Room 119 “Smart Classroom” System

Overview &

Operation Guide

Features of the system: Manually-Operated Front Projection Screen

Features of the system: High-Resolution XGA (1024x768) High Brightness (3000 ANSI lumens) LCD Projector suspended from the ceiling.

Sharp XG-C50X

Other features of the system: New equipment has been added to the existing Equipment Rack located in the AV Room.

DVD Player & New Control System w/Color LCD

Touchpanel

Other features of the system: Desk-Mounted “Table Buddy” provides Laptop

Computer Video & Audio inputs

Laptop Input located on the edge of the

desk in the 2nd row.

Connect the audio from the laptop computer’s stereo headphone jack.

Desk-Mounted “Table Buddy” provides Laptop Computer Video & Audio inputs

Connect to the 15-Pin HD jack from the (monitor) output of your laptop computer.

Front View Side View

VGA 15-pin HD Connection for computer video and a 3.5mm Stereo MiniJack for computer audio.

NOTE: VGA Cable with audio is available and stored in the drawer located in the equipment rack.

Be sure this device does not get unplugged from the AC outlet located down near the floor. The laptop signal will not reach the projection system should either of the AC plugs be disconnected.

Desk-Mounted “Table Buddy” provides Laptop Computer Video & Audio inputs

Other features of the system: Wall-Mounted Input Plates for Secondary

Computer Input w/Audio and a Microphone Input

The #2 computer input to the projection system is located near the floor, in the right-hand corner of the wall behind the projection screen.

Wired Microphone input to the sound system.

Wireless Color LCD Touchpanel Remote Control Operates all Audio-Visual Equipment

Wireless Touchpanel

Charging BaseThe touchpanel is stored in the A/V Equipment Room. It should remain on the charging base “when not in use”.

1. Simply touch the surface of the panel and AASU Logo appears. This is referred to as the “START PAGE”.

2. Touch the “START PAGE” a second time and the system is activated. Once the system is activated all the video and audio equipment is “powered up” and ready for use. Touching the surface a second time also takes you directly to the “SYSTEM OPTIONS PAGE”.

NOTE: The AASU logo also appears when system power is turned off.

Simply touch the “SOURCE MENU” button to select the equipment you want to

operate.

The “SOURCE MENU” will appear and provide you with the various choices of equipment you can operate during your presentation.

This is the “SOURCE MENU” as you can see you have various types of equipment and inputs to the LCD projection and sound system that you can utilize to present your information electronically to the students.

Select Source by pressing the surface of the touchpanel.

Available sources for visual display: VCR DVD Laser Disc Computer– Input 1 Aux Computer – Input 2 Aux Video w/Audio

Available sources and/or inputs for audio playback: Audio Cassette Deck CD playback via DVD Player L/R Audio Jacks of the Aux Video Input

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “CASS” button the “Audio Cassette Functions” will appear.

LCD Touchpanel Control: Source Selection – Audio Cassette Deck

Audio Cassette Function Page

Note: Volume Control appears on all pages where it is required

PLAY--- Starts playback of audio cassette tape.

STOP --- Stops playback of cassette tape.

PAUSE –-Press to pause playback of the cassette tape.

FAST FORWARD: Provides high speed forward advance of the cassette tape.

REWIND: Provides high speed reverse/rewind of the cassette tape.

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “DVD & CD” button the “DVD Menu Control” Navigation Page appears.

LCD Touchpanel Control: Source Selection – DVD or Compact Disc

DVD & CD Navigation Page

Note: Volume Control appears on all pages where it is required

MENU – Returns you to the DVD Main Menu

Use the Up/Down and Left/Right Arrow buttons to navigate on-screen displays and DVD menus.

ENTER – Press ENTER to select an option or execute a commend.

Press this button to return to or select the DVD “Play Function Page”

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “Back to DVD Play Controls” button the “DVD/CD Play Function Page appears.

LCD Touchpanel Control: Source Selection – DVD or CD Playback

DVD/CD Play Function PageFWD Arrow – Press to start or resume playback

Dual FWD Arrow --- Use for forward slow motion playback, frame advance and forward scanning

STOP – Press to stop disc

Press to jump to the next chapter or track

PAUSE --- Press to pause playback; press again to restart

Dual REV Arrow --- Use for reverse slow motion playback, frame reverse and reverse scanning

Dual REV Arrow --- Press to jump to the beginning of the current chapter or track, then to previous chapters and tracks

LCD Touchpanel Control: Source Selection – VCR Operation

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “VCR” button the “VCR Functions” will appear.

VCR Function PagePLAY: Starts playback of ½” VHS video tape.

PAUSE: Displays “still image” during video cassette playback.

STOP – Press to stop video cassette playback

FAST FORWARD: While in PLAY, FFWD provides high speed visual search. Depressed after STOPPING tape provides high speed forward advance of tape.

CHANNEL: Provides up/down selection of CATV channels

REWIND: While in PLAY, REW provides high speed visual search. Depressed after STOPPING tape provides high speed reversal of tape.

LCD Touchpanel Control: Source Selection – Auxiliary Video Input

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “AUX” button the following message will appear.

You will control your auxiliary video (i.e. camcorder, DVD, VCR etc.) source manually

or with it’s own IR remote.

Auxiliary Video w/Left & Right Stereo Audio Input

The AUX Video & Audio inputs are located in the desk-mounted “Table Buddy” Input Plate.

LCD Touchpanel Control: Source Selection – Laser Disc Playback

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “LD” (Laser Disc) button the “Laser Disc Player Functions” will appear.

Laser Disc Player Function PageFWD Arrow – Press to start or resume playback

Dual FWD Arrow --- Use for forward slow motion playback, frame advance and forward scanning

STOP – Press to stop disc

Press to jump to the next chapter or track

PAUSE --- Press to pause playback; press again to restart

Dual REV Arrow --- Use for reverse slow motion playback, frame reverse and reverse scanning

Dual REV Arrow --- Press to jump to the beginning of the current chapter or track, then to previous chapters and tracks

LCD Touchpanel Control: Source Selection --- Microphone Level Adjustment

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “MIC ADJ” button the “Microphone Adjustment Page” will appear.

LCD Touchpanel Control: Source Selection

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “Return” button the the “Previous Function Page” will appear.

LCD Touchpanel Control: Source Selection – Computer Input #1

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “Computer 1” button the Laptop computer input located at the desk-mounted “Cable Buddy” is selected

for display through the LCD projection system.

When you touch the “Computer 2” button the computer input located in the right-hand corner of the wall behind the

projection screen is selected for display through the LCD projection system.

LCD Touchpanel Control: Source Selection – Computer Input #2

When you touch the “Audio& Video” button you will be returned back to the Audio and Video Source Selection Page.

LCD Touchpanel Control: Source Selection – Audio & Video Equipment

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “System Options” button you will be returned back to the Audio and Video Source Selection Page.

LCD Touchpanel Control: Source Selection – System Options

Note: Source is highlighted when selected by depressing touchpanel surface.

When you touch the “System Help” button the HELP page will appear.

LCD Touchpanel Control: Source Selection – System Help

Note: Source is highlighted when selected by depressing touchpanel surface.

Warranty & Maintenance Four Years on All Equipment

Consumable items such as video cassette recorder record/tape playback heads, lamps, and batteries, will be warranted in accordance with the original manufacturer's warranty only. Devices including, but not limited to, fuses and/or power and/or lightning transient protectors/suppressors, which are designed to fail in order to protect the system equipment(s) are not included in the warranty.

Four Years on Labor (NOTE: Labor to correct warranty problems is provided only during normal working hours,

Monday through Friday, 8:30 a.m. - 5:00 p.m., excluding holidays.)

Manufacturer’s Warranty CoverageService Contact

Local # 236-1345 Toll Free Phone Support: (800) 736-9242 Ask for Service Dept. and refer to

JOB#22315

Warranty & Maintenance Four Years on All Equipment

Consumable items such as video cassette recorder record/tape playback heads, lamps, and batteries, will be warranted in accordance with the original manufacturer's warranty only. Devices including, but not limited to, fuses and/or power and/or lightning transient protectors/suppressors, which are designed to fail in order to protect the system equipment(s) are not included in the warranty.

Four Years on Labor NOTE: Labor to correct warranty problems is provided only during normal working hours,

Monday through Friday, 8:30 a.m. - 5:00 p.m., excluding holidays.

Manufacturer’s Warranty Coverage

Service Contact Local # 236-1345 Toll Free Phone Support: (800) 736-9242 Ask for Service Dept. and refer to JOB#22315

THANK YOU

FOR THIS

SERVICE!!

OPPORTUNITY

TO BE OF