asbestos & lead based paint assessment & lead based paint assessment ... nad plm - nad...

Asbestos & Lead Based Paint Assessment

City of Anderson 710 A&B Beechwood Avenue

Anderson, South Carolina 29624

Prepared for: City of Anderson

Community Development Department 601 South Main Street

Anderson, South Carolina 29624

Prepared by: Apex Environmental Management, Inc.

7 Winchester Court Mauldin, South Carolina 29662

Project Number: 1115-232

March 4, 2015

7 Winchester Court Mauldin, SC 29662 864.404.3210 office 864.404.3213 fax www.apex-ehs.com

SERVICES

Indoor Air Quality

Mold Remediation

Asbestos & Lead

Industrial Hygiene

Worker Health & Safety

Mold Consulting

Moisture

Management Plans

Safety

Assessment

Environmental Site Assessments

Hazard

Communication

Apex Project Number 1115-232

March 4, 2016 Ms. Erica Craft City of Anderson Community Development Department 601 South Main Street Anderson, South Carolina 29624 Reference: Asbestos and Lead-Based Paint Assessment Services 710 A&B Beechwood Avenue

Anderson, South Carolina 29624 Dear Ms. Craft: Apex Environmental Management, Inc. (Apex) is pleased to provide the results of our assessment services for the referenced property in accordance with Apex proposal number 1115-231P dated November 10, 2015. This report and the associated attachments summarize our evaluation of the conditions observed at the project site. The findings presented by Apex are based upon sampling performed in the subject building. There is a chance that undetected ACM may exist in the building between walls or in other areas that would only be exposed during demolition or structural renovations. Should material be discovered that could potentially contain asbestos during the demolition process, additional samples of the material should be collected by a licensed asbestos inspector and submitted to an accredited laboratory for analytical interpretation. Our recommendations are based on the guidelines presented in EPA and/or OSHA regulations. Please note that this document is not a specification for asbestos removal. It does not contain means and methods for abatement. Quantities are estimates and contractors must verify amounts prior to bidding or removal. If you are planning an abatement project, please contact Apex to discuss the requirements. Use of this document without the express written consent of Apex is at the sole risk of the user and or/abatement contractor. The conclusions and/or recommendations contained in this report are based on our understanding of the applicable standards at the time this report was prepared. No warranty, expressed or implied, is made. If you have any questions please feel free to contact us at (864) 404-3210. Respectfully submitted, APEX ENVIRONMENTAL MANAGEMENT, INC. Thomas H. Oliver Tedman K. Shultz Director of Operations Project Manager Appendices

toliver

Tom

tshultz

T Shultz

ASBESTOS AND LEAD BASED PAINT ASSESSMENT

CITY OF ANDERSON 710 A&B BEECHWOOD AVENUE

ANDERSON, SOUTH CAROLINA 29624

APEX PROJECT NO. 1115-232

TABLE OF CONTENTS SECTION

I Asbestos & Lead Evaluation Report II Asbestos & LBP Data Tables III Laboratory Analytical Results IV Photographic Log

V SC DHEC Asbestos Inspector License

SECTION I

Asbestos & Lead Evaluation Report

1

Date:

3/4/2016 Page Number: 1 of 4

Client: City of Anderson Client Contact: Ms. Erica Craft Client Address:

601 South Main Street Anderson, SC 29624

Client Phone Number:

(864) 231-2223

Project:

Asbestos and Lead Evaluation

Property Address:

710 A&B Beechwood Ave. Anderson, SC

Assessor: Ted Shultz Date of

Assessment: 2/18/2016

Company:

Apex Environmental Management 7 Winchester Court Mauldin, SC 29662

Phone Number (864) 404-3210

Purpose of Assessment:

Demolition Age of Structure:

50 ± years

Building Type:

Residential Number of Stories:

1

Foundation: Brick & CMU Block Crawlspace

Approximate Square Footage

1,800 SF

EXTERIOR BUILDING MATERIALS INTERIOR BUILDING MATERIALS Pitched wooden roof with shingles felt. Brick siding. Wooden windows. Window glazing.

Multiple types & layers of vinyl floor with no mastic.

Plaster with texture & finish. Drywall with no joint compound & tape. Wooden floors.

ASBESTOS/LEAD EVALUATION REPORT APEX PROJECT NUMBER: 1115-232

City of Anderson 710 A&B Beechwood Avenue Apex Project No. 1115-232 March 4, 2016

2

SCOPE OF THE SURVEY The objectives of the asbestos and lead assessment included the following:

Identification of suspect asbestos-containing material (ACM) and lead based paints (LBP) in readily observable locations. Limited demolition of building finishes was conducted.

Asbestos survey with sample collection by a South Carolina accredited inspector. Suspect ACM analysis by polarized light microscopy (PLM) utilizing CEI Labs (CEI) as

an NVLAP certified laboratory, their accreditation number is 101768-0. Transmission electron microscopy (TEM) analysis of non-friable organically bound

materials suspected to contain asbestos and testing negatively by PLM analysis. Lead inspection by a lead inspector certified by the Environmental Protection Agency

and licensed to conduct LBP surveys in South Carolina. In situ analysis of suspected lead based paints by X-ray fluorescence (XRF). Presenting the results in a report identifying confirmed ACMs and LBPs.

METHODS Asbestos Containing Materials In order to determine if the suspect materials observed during the visual survey contained asbestos, representative bulk samples were collected and placed in sealed packages. Twenty-six (26) bulk samples were collected during the survey and submitted to CEI Labs (CEI) in Cary, North Carolina for analysis using the EPA recommended method of Polarized Light Microscopy (PLM) coupled with dispersion staining (Method No. EPA 600/M4-82-020, Dec. 1982). CEI participates in the National Voluntary Laboratory Accreditation Program (NVLAP). Their NVLAP accreditation number is 101768-0 . EPA regulations require that multiple samples of each homogeneous material be collected for laboratory analysis. In accordance with South Carolina Regulation 61-86.1, non-friable organically bound materials that are reported to be non-asbestos containing by PLM analysis must also be analyzed by Transmission Electron Microscopy (TEM). Ten (10) samples were analyzed using TEM. Lead-Based Paint Lead painted surfaces were analyzed in place using X-ray fluorescence. Painted surfaces were selected based on color of topcoat, underlying layers and substrate on which it was painted. RESULTS Asbestos Containing Materials The EPA defines an asbestos-containing material (ACM) as a material containing more than 1% asbestos. OSHA defines ACM as a material containing any amount of asbestos. Provided below is a general discussion of the asbestos containing materials identified in the residence. A specific PLM and TEM table is located in Appendix II of this report and identifies positive materials and designates approximate quantities.


3

No materials sampled during the assessment were identified to be asbestos containing. Lead Based Paint OSHA does not recognize a threshold level of lead for definition purposes, only the presence or absence of lead. The current OSHA regulations recognize an airborne action level of thirty micrograms per cubic meter (30 µg/m3) during an eight-hour workday and a permissible exposure level of fifty micrograms per cubic meter (50 µg/m3) for employees. Currently, the EPA defines LBP as paint containing in excess of, or equal to, 1.0 mg/cm3. The XRF analytical results and approximate locations of the paint samples collected are included in the Lead Analysis Report in Appendix II. Several surfaces in the building tested positive for lead in excess of the regulatory definition: Exterior White wooden door frames Interior No surfaces tested positive for LBP RECOMMENDATIONS AND DISCUSSION Asbestos Containing Materials No asbestos was present in the materials sampled within the structure. Therefore, no recommendations are necessary at this time.

Lead-Based Paint

1. Currently the South Carolina Department of Health and Environmental Control (SCDHEC) define LBP as paint containing greater than 1.0 milligrams per square centimeter (mg/cm2) lead or in excess of, or equal to, 0.5 percent lead. Building materials identified as being painted with LBP should be segregated from the other building materials and recycled or disposed of in a municipal lined landfill. The removed wastes would need to be containerized and further tested by Toxic Characteristic Leaching procedures (TCLP) to determine if the waste is classified as hazardous. The remaining building materials that are not painted with LBP may be disposed of in a construction and demolition landfill. However, the landfills should be contacted to determine their specific disposal requirements.

2. Occupational Safety and Health Administration Lead Regulations apply to actions

initiated on lead containing materials. This regulation applies to lead concentrations greater than the analytical limit of detection. This regulation sets exposure levels on airborne lead and does not reference the percent lead in paint. Therefore, initial personal air monitoring should be conducted on workers performing work on surfaces which have a lead concentration of 0.1 mg/ cm2 or above to satisfy the OSHA requirements. If a baseline exposure lower than the OSHA Action Level of 30


4

micrograms per cubic meter (g/m3) is established, personal air monitoring may be terminated. The full OSHA lead standard should be referenced for compliance.

This report summarizes our evaluation of the conditions observed at the site. The findings prepared by Apex are based upon testing performed in the structures. Our recommendations are based on the guidelines presented in EPA, State of South Carolina and OSHA asbestos regulations. Please note that this document is not a specification for asbestos or lead paint removal. It does not contain means and methods for asbestos or lead paint abatement. If you are planning an asbestos or lead paint abatement project, please contact Apex to discuss the requirements. Use of this document without the express written consent of Apex is at the sole risk of the user and/or abatement contractor. Quantities provided in this report are estimated. Contractors must verify material amounts prior to bidding or removal. This report summarizes our evaluation of the conditions observed at the site. The findings prepared by Apex are based upon testing performed in the building space. Additional ACM or LBP may exist (undetected) in other areas due to their inaccessibility or due to the limited nature of our testing. Our assessment procedures and recommendations are based on the guidelines presented in EPA, State of South Carolina or OSHA asbestos regulations. A copy of this report must be submitted to SCDHEC at least ten (10) working days prior to demolition when applying for a demolition permit.

SECTION II

Asbestos & LBP Data Tables

Project Name: COA 700 A & B Beechwood Avenue ACM/LBP Sampled By: Ted Shultz

Project Location: 700 A & B Beechwood Avenue, Anderson, SC Project Manager: Rebecca Shultz

Project Number: 1115-232 Date: 2/18/2016

1

2

3 TEM - NAD

4

5

6 TEM - NAD

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23 TEM - NAD

PLM - NAD

PLM - NAD

PLM - NADFriable Damaged 8 EAWindow glazing

Throughout Drywall with no joint compound or tape

Windows

Throughout Plaster with texture & finish PLM - NAD

PLM - NAD

Friable Damaged 4,500 SF

Friable Damaged 4,500 SF

B bathroomMultplie layers of tan, beige & white

vinyl floors with no masticNon-Friable G 40 SF

A & B kitchen12" x 12' self-stick floor tile & tan & with white square pattern vinyl floor

with no masticNon-Friable G 300 SF

ASBESTOS SURVEY PLM & TEM FIELD DATA SHEET

QuantityAnalytical ResultsFriable/Non

FriableLocationSample No. ConditionSample Description

QuantityAnalytical ResultsFriable/Non

FriableLocationSample No. ConditionSample Description

24

25

26 TEM - NAD

NAD = No Asbestos Detected LF = Linear Feet EA = Each

Bold = Positive For Asbestos SF = Square Feet

Non-Friable Damaged 2,200 SFPLM - NAD

Roof Roof shingles (2 layers) & felt

Project Name: COA 710 A & B Beechwood Avenue ACM/LBP Sampled By: Ted Shultz

Project Location: 710 A & B Beechwood Avenue, Anderson, SC Project Manager: Rebecca Shultz

Project Number: 1115-232 Date: 2/18/2016

16 side porch post white wood 0.0017 side porch door frame white wood 1.6718 interior door frame white wood NA19 interior door frame white wood 0.2520 interior wall white plaster 0.0021 interior book shelf white wood 0.4722 interior base board white wood NA23 interior base board white wood 0.3424 interior window frame white wood 0.2525 interior door frame white wood 0.19

Bold = Positive for LBP in excess of 1.0 mg/cm2 NA = Insufficient Test Time

FIELD DATA SHEETLBP ANALYSIS

Sample No. Sample Location Component Color SubstrateAnalytical Result

(mg/m3)

SECTION III

Laboratory Analytical Results

February 24, 2016

Apex Environmental Management7 Winchester CourtMauldin, SC 29662

CLIENT PROJECT: COA 710 Beechwood AveCEI LAB CODE: B16-1659

Dear Customer:

Enclosed are asbestos analysis results for PLM Bulk samples received at our laboratory onFebruary 19, 2016. The samples were analyzed for asbestos using polarizing light microscopy(PLM) per the EPA 600 Method.

Sample results containing >1% asbestos are considered asbestos-containing materials(ACMs) per EPA regulatory requirements. The detection limit for the EPA 600 Method is <1%asbestos by weight as determined by visual estimation.

Thank you for your business and we look forward to continuing good relations. If you have anyquestions, please feel free to call our office at 919-481-1413.

107 New Edition Court • Cary, NC 27511 • 919.481.1413

Tianbao Bai, Ph.D., CIHLaboratory Director

Kind Regards,

ASBESTOS ANALYTICAL REPORTBy: Polarized Light Microscopy

Prepared for

Apex Environmental Management

TEL: 866-481-1412www.ceilabs.com

CLIENT PROJECT:

CEI LAB CODE:

TEST METHOD: EPA 600 / R93 / 116 and EPA 600 / M4-82 / 020

REPORT DATE:

TOTAL SAMPLES ANALYZED:

# SAMPLES >1% ASBESTOS:

COA 710 Beechwood Ave

B16-1659

22

02/24/16

Asbestos Report SummaryBy: POLARIZING LIGHT MICROSCOPY

PROJECT: COA 710 Beechwood Ave CEI LAB CODE: B16-1659

Client ID Lab ID Color Sample DescriptionASBESTOS

%Layer

METHOD: EPA 600 / R93 / 116 and EPA 600 / M4-82 / 020

B147591A Tan,Patterned Floor Tile None Detected1

B147591B Clear Mastic None Detected

B147591C Beige,Gray Sheet Vinyl None Detected

B147592A Tan,Patterned Floor Tile None Detected2

B147592B Clear Mastic None Detected

B147592C Beige,Gray Sheet Vinyl None Detected

B147593 Sample Submitted for TEMAnalysis

3

B147594A Tan,Gray Sheet Vinyl None Detected4

B147594B Beige,Gray Sheet Vinyl None Detected

B147594C Off-white,Gray Sheet Vinyl None Detected

B147595A Tan,Gray Sheet Vinyl None Detected5

B147595B Beige,Gray Sheet Vinyl None Detected

B147595C Off-white,Gray Sheet Vinyl None Detected


6

Layer 1 B147597 White Texture None Detected7

Layer 2 B147597 White Plaster Skim Coat None Detected

Layer 3 B147597 Gray Plaster Base Coat None Detected








Layer 2 B147600 Gray Plaster None Detected






Page 1 of 2

Asbestos Report SummaryBy: POLARIZING LIGHT MICROSCOPY

PROJECT: COA 710 Beechwood Ave CEI LAB CODE: B16-1659

Client ID Lab ID Color Sample DescriptionASBESTOS

%Layer






B147604 Gray Drywall None Detected14







B147611 White Window Glazing None Detected21

B147612 White Window Glazing None Detected22


23

Layer 1 B147614 Off-white,Black Roof Shingle None Detected24

Layer 2 B147614 Black Roof Shingle None Detected

Layer 3 B147614 Black Felt Paper None Detected

Layer 1 B147615 Off-white,Black Roof Shingle None Detected25

Layer 2 B147615 Black Roof Shingle None Detected

Layer 3 B147615 Black Felt Paper None Detected


26

Page 2 of 2

ASBESTOS BULK ANALYSISBy: POLARIZING LIGHT MICROSCOPY

CEI Lab Code: B16-1659Date Received: 02-19-16Date Analyzed: 02-22-16Date Reported: 02-24-16

Client IDLab ID

LabAttributes

LabDescription

ASBESTOS%

ASBESTOS BULK PLM, EPA 600 METHODNON-ASBESTOS COMPONENTS

Non-Fibrous

Client: Apex Environmental Management7 Winchester CourtMauldin, SC 29662

Project: COA 710 Beechwood Ave

Fibrous

Tan,PatternedFloor Tile1

B147591AHeterogeneous

Non-fibrousBound

100% Vinyl None Detected

ClearMasticB147591B Homogeneous

Non-fibrousBound

100% Mastic None Detected

Beige,GraySheet VinylB147591C 20%

5%Heterogeneous

FibrousBound

50%25%

CelluloseFiberglass

VinylBinder

None Detected

Tan,PatternedFloor Tile2

B147592AHeterogeneous

Non-fibrousBound

100% Vinyl None Detected

ClearMasticB147592B Homogeneous

Non-fibrousBound

100% Mastic None Detected

Beige,GraySheet VinylB147592C 20%

5%Heterogeneous

FibrousBound

50%25%

CelluloseFiberglass

VinylBinder

None Detected

Sample Submitted forTEM Analysis

3B147593

Tan,GraySheet Vinyl4

B147594A20%5%

Heterogeneous

FibrousBound

50%25%

CelluloseFiberglass

VinylBinder

None Detected

Page 1 of 8



Client IDLab ID

LabAttributes

LabDescription

ASBESTOS%


Non-Fibrous



Fibrous

Beige,GraySheet VinylB147594B 20%

5%Heterogeneous

FibrousBound

50%25%

CelluloseFiberglass

VinylBinder

None Detected

Off-white,GraySheet VinylB147594C 20%

5%Heterogeneous

FibrousBound

50%25%

CelluloseFiberglass

VinylBinder

None Detected

Tan,GraySheet Vinyl5

B147595A20%5%

Heterogeneous

FibrousBound

50%25%

CelluloseFiberglass

VinylBinder

None Detected

Beige,GraySheet VinylB147595B 20%

5%Heterogeneous

FibrousBound

50%25%

CelluloseFiberglass

VinylBinder

None Detected

Off-white,GraySheet VinylB147595C 20%

5%Heterogeneous

FibrousBound

50%25%

CelluloseFiberglass

VinylBinder

None Detected


6B147596

White7

B147597

10%Heterogeneous

Non-fibrousBound

80%5%5%

Talc Calc CarbSilicatesPaint

None DetectedLayer 1

Texture

WhitePlaster Skim Coat

B147597Homogeneous

Non-fibrousBound

65%30%5%

BinderSilicatesPaint


Page 2 of 8



Client IDLab ID

LabAttributes

LabDescription

ASBESTOS%


Non-Fibrous



Fibrous

GrayPlaster Base Coat

B147597Homogeneous

Non-fibrousBound

35%65%

BinderSilicates


White8

B147598

10%Heterogeneous

Non-fibrousBound

80%5%5%



Texture


B147598Homogeneous

Non-fibrousBound

65%30%5%




B147598Homogeneous

Non-fibrousBound

35%65%

BinderSilicates


White9

B147599

10%Heterogeneous

Non-fibrousBound

80%5%5%



Texture


B147599Homogeneous

Non-fibrousBound

65%30%5%




B147599Homogeneous

Non-fibrousBound

35%65%

BinderSilicates


Page 3 of 8



Client IDLab ID

LabAttributes

LabDescription

ASBESTOS%


Non-Fibrous



Fibrous

White10

B147600

10%Heterogeneous

Non-fibrousBound

80%5%5%



Texture

GrayPlaster

B147600Homogeneous

Non-fibrousBound

Lab Notes: No skim coat present.

35%65%

BinderSilicates


White11

B147601

10%Heterogeneous

Non-fibrousBound

80%5%5%



Texture


B147601Homogeneous

Non-fibrousBound

65%30%5%




B147601Homogeneous

Non-fibrousBound

35%65%

BinderSilicates


White12

B147602

10%Heterogeneous

Non-fibrousBound

80%5%5%



Texture


B147602Homogeneous

Non-fibrousBound

65%30%5%



Page 4 of 8



Client IDLab ID

LabAttributes

LabDescription

ASBESTOS%


Non-Fibrous



Fibrous


B147602Homogeneous

Non-fibrousBound

35%65%

BinderSilicates


White13

B147603

10%Heterogeneous

Non-fibrousBound

80%5%5%



Texture


B147603Homogeneous

Non-fibrousBound

65%30%5%




B147603Homogeneous

Non-fibrousBound

35%65%

BinderSilicates


GrayDrywall14

B14760410%Homogeneous

FibrousBound

85%5%

Cellulose GypsumSilicates

None Detected

GrayDrywall15


FibrousBound

85%5%


None Detected

GrayDrywall16


FibrousBound

85%5%


None Detected

Page 5 of 8



Client IDLab ID

LabAttributes

LabDescription

ASBESTOS%


Non-Fibrous



Fibrous

GrayDrywall17


FibrousBound

85%5%


None Detected

GrayDrywall18


FibrousBound

85%5%


None Detected

GrayDrywall19


FibrousBound

85%5%


None Detected

GrayDrywall20


FibrousBound

85%5%


None Detected

WhiteWindow Glazing21

B147611Heterogeneous

Non-fibrousBound

85%10%5%

BinderCalc CarbPaint

None Detected

WhiteWindow Glazing22

B147612Heterogeneous

Non-fibrousBound

85%10%5%

BinderCalc CarbPaint

None Detected


23B147613

Off-white,Black24

B147614

25%Heterogeneous

FibrousBound

40%35%

Fiberglass TarSilicates


Roof Shingle

Page 6 of 8



Client IDLab ID

LabAttributes

LabDescription

ASBESTOS%


Non-Fibrous



Fibrous

BlackRoof Shingle


FibrousBound

20%Cellulose Tar None DetectedLayer 2

BlackFelt Paper

B14761425%Heterogeneous

FibrousBound

40%35%



Off-white,Black25

B147615

25%Heterogeneous

FibrousBound

40%35%



Roof Shingle

BlackRoof Shingle


FibrousBound

20%Cellulose Tar None DetectedLayer 2

BlackFelt Paper

B14761525%Heterogeneous

FibrousBound

40%35%




26B147616

Page 7 of 8

LEGEND: Non-Anth = Non-Asbestiform AnthophylliteNon-Trem = Non-Asbestiform TremoliteCalc Carb = Calcium Carbonate


LIMIT OF DETECTION: <1% by visual estimation

REGULATORY LIMIT: >1% by weight

Due to the limitations of the EPA 600 method, nonfriable organically bound materials (NOBs) such asvinyl floor tiles can be difficult to analyze via polarized light microscopy (PLM). EPA recommends thatall NOBs analyzed by PLM, and found not to contain asbestos, be further analyzed by TransmissionElectron Microscopy (TEM). Please note that PLM analysis of dust and soil samples for asbestos is notcovered under NVLAP accreditation.

This report relates only to the samples tested or analyzed and may not be reproduced, except in full,without written approval by CEI Labs, Inc. CEI Labs makes no warranty representation regarding theaccuracy of client submitted information in preparing and presenting analytical results. Interpretation ofthe analytical results is the sole responsibility of the client. This report may not be used by the client toclaim product endorsement by NVLAP or any other agency of the U.S. Government.

Page 8 of 8

ANALYST: APPROVED BY:Tianbao Bai, Ph.D., CIHLaboratory Director

Taylor B. Metcalf

February 24, 2016

Apex Environmental Management7 Winchester CourtMauldin, SC 29662

CLIENT PROJECT: COA 710 Beechwood AveCEI LAB CODE: T16-0239

Dear Customer:

Enclosed are asbestos analysis results for TEM bulk samples received at our laboratory onFebruary 22, 2016. The samples were analyzed for asbestos using transmission electronmicroscopy (TEM) per Chatfield Method.

Sample results containing > 1% asbestos are considered asbestos-containing materials(ACMs) per the EPA regulatory requirements. The detection limit for the TEM Chatfieldmethod is <1% depending on the processed weight and constituents of the sample.

Thank you for your business and we look forward to continuing good relations. If you have anyquestions, please feel free to call our office at 919-481-1413.

107 New Edition Court • Cary, NC 27511 • 919.481.1413

Tianbao Bai, Ph.D., CIHLaboratory Director

Kind Regards,

ASBESTOS ANALYTICAL REPORTBy: Transmission Electron Microscopy

Prepared for

Apex Environmental Management

TEL: 866-481-1412www.ceilabs.com

CLIENT PROJECT:

CEI LAB CODE:

TEST METHOD: Bulk ChatfieldEPA 600 / R93 / 116

REPORT DATE:

COA 710 Beechwood Ave

T16-0239

02/24/16

ASBESTOS BULK ANALYSISBy: TRANSMISSION ELECTRON MICROSCOPY

CEI Lab Code: T16-0239Date Received: 02-22-16Date Analyzed: 02-23-16Date Reported: 02-24-16

Client IDLab ID

MaterialDescription

TEM BULK CHATFIELD / EPA 600 / R93 / 116



SampleWeight

(g)

OrganicMaterial

%

Acid SolubleMaterial

%

Acid InsolubleMaterial

%Asbestos

%

T471523 Tan, Patterned Floor Tile 0.23 24.8 74.8 .4 None

Detected

T471533 Beige Gray Sheet Vinyl 0.114 31.6 61.4 7 None

Detected

T471543 Clear Mastic 0.122 55.7 15.6 28.7 None

Detected

T471556 Tan Gray Sheet Vinyl 0.205 45.9 51.7 2.4 None

Detected

T471566 Beige Gray Sheet Vinyl 0.245 56.7 18.4 24.9 None

Detected

T471576 Off-white Sheet Vinyl 0.342 52.3 20.2 27.5 None

Detected

T4715823 White Window Glazing 0.413 11.4 83.1 5.5 None

Detected

T4715926 Off-white Black Roof

Shingle0.289 27.3 55.4 17.3 None

Detected

T4716026 Black Roof Shingle 0.409 19.6 28.1 52.3 None

Detected

T4716126 Black Felt Paper 0.209 95.2 3.3 1.5 None

Detected

Page 1 of 2

LEGEND: None

METHOD: CHATFIELD & EPA/600/R-93/116

LIMIT OF DETECTION: Varies with the weight and constituents of the sample (<1%)

REGULATORY LIMIT: >1% by weight

This report relates only to the samples tested or analyzed and may not be reproduced, except in full,without written approval by CEI Labs, Inc. CEI Labs makes no warranty representation regarding theaccuracy of client submitted information in preparing and presenting analytical results. Interpretation ofthe analytical results is the sole responsibility of the client.

Page 2 of 2

ANALYST: APPROVED BY:Tianbao Bai, Ph.D., CIHLaboratory Director

Kamila Reichert

SECTION IV

Photographic Log

Apex Asbestos Assessment 710 Beechwood Anderson, South Carolina

710 A&B Beechwood Avenue in Anderson, South Carolina

Vinyl Flooring

Vinyl floor tile

Apex Asbestos Assessment 710 Beechwood Anderson, South Carolina

Wood Floor

SECTION V

SC DHEC Asbestos Inspector License

asbestos & lead based paint assessment & lead based paint assessment ... nad plm - nad...

Documents