as an independent protection and control specialist, rts

RTS Consulting – Automation | 11 Dansk Ct, Etobicoke, ON M9W 5N6 | 416-798-2511 | www.rtsperfectplant.com

RTS specializes in providing power system “protection, control, telecommunication” (PCT) panels/cubicles for all levels of electrical power transmission, distribution and generation. Whether for electrical utilities, renewable installations, industrial sites or the transport sector. We design and manufacture PCT panels for a large range of applications, including: ➢ Substation automation equipment ➢ Substation control panels and mimic control boards ➢ Metering & fault recording ➢ Transformer Automatic Voltage Control (AVC) systems ➢ Generator, transformer, feeder, busbar and mesh corner protection ➢ Digital control systems

RTS can provide standard 19” rack type panels or custom-sized panels tailored to suit specific demands. Panels can be rear access or front access swing frame style where substation space is limited.

With customer satisfaction as our top priority, along with stringent quality manufacturing processes in place at every level of production, RTS products are compliant with the

industry's statutory and regulatory requirements. All RTS products are manufactured and consequently, processed in compliance to international standards, to which the

ISO certificate 900I:2015 awarded to RTS bears witness.

As an independent protection and control specialist, RTS can deliver engineered solutions and products using equipment from all the major manufacturers.


Protection

Panels ➢ Feeder Protection Panels ➢ Transformer Protection

Panels ➢ Bus Coupler Protection

Panels ➢ Shunt Capacitor Protection

Panels ➢ Series Reactor Protection

Panels ➢ Load Shedding Protection

Panels ➢ Busbar Protection Panels ➢ Generator Protection Panel ➢ Motor Protection Panel ➢ Protection Panels for

Transition Grid

Substation

Automation Panels

➢ SAS Network Panels ➢ Automatic Bus Transfer

Scheme Panels ➢ Automatic Capacitor

Control System Panels ➢ Server And Gateway

Panels

Metering

Panels

➢ Advanced Metering Infrastructure System (AMI Panels)

➢ Automatic Meter Reading System (AMR Panels)

Protection & Control Panel

Deliverables

RTS’s protection and control panels may house various equipment, including:

▪ Protection & Control IEDs ▪ Meters and Fault Recorders ▪ Control Switches & Mimic Panels ▪ Network Switches & GPS Clocks ▪ PLC Equipment ▪ Industrial Computers & HMI Monitors

RTS is excited to work with you on your panel fabrication requirements, in whtever context as you see fit:

▪ Fabricating Custom Panels/Racks ▪ Procurement of Electrical Components & IEDs ▪ Mounting and Installation of Electrical Equipment ▪ Quality Assurance Checks (Buzz Tests, etc.) ▪ Panel FAT/SAT ▪ Installation of Panels and Inter-Panel Cabling


PROTECTION RELAY PANELS Line Feeder Protection Panels

▪ Line differential protection ▪ Distance protection ▪ Directional over current protection ▪ Breaker Failure Protection ▪ Auto re-close & synchronizing check scheme

Transformer Protection Panels

▪ Differential Protection Panels ▪ REF protection (Residual Earth Fault) ▪ SEF protection (Sensitive Earth Fault) ▪ Over current protection ▪ Breaker failure protection

Load Shedding Protection

Scheme

▪ Over voltage/under voltage protection

▪ Over frequency/under frequency protection

Bus Coupler Relay Panel / Bus

Section Relay Panel

▪ Over current protection

▪ Breaker failure protection

Busbar Protection Relay

Panel

▪ Busbar differential protection

▪ Breaker failure protection

CONTROL PANELS

Automatic Changeover Switching Equipment (ACSE)

The automatic control function is responsible for the automatic switching scheme and interlock for breakers. In order to achieve this function, the intelligent electronic device (IED) collects inputs for breaker status, protection relays, and other data related to power such as voltage and volt-ampere reactive (VAR) values. This function is derived from the same IED used in the panel to divert the control through the supervisory control and data acquisition system (SCADA) system.

Automatic Bus Transfer Scheme (ABTS)

The automatic bus transfer scheme (ABTS) is an automatic switching scheme in substations which performs in parallel with some transformers. In the event of the power transformer failure, the remaining transformers continue to operate to feed the entire load without interruption of supply. The ABTS scheme can be achieved through a programmable IED or remotely controlled through the supervisory control and data acquisition (SCADA) system.


Automatic Capacitor Control System (ACCS) The automatic capacitor control system (ACCS) provides automatic control for capacitor banks to improve the power factor and reduce the volt-ampere reactive (VAR) value in the network, thereby helping to reduce losses in power lines, the control logic performed by gathering voltage, current, and breaker status of the busbar and the incomers. This control can be achieved through an IED which can calculate the VAR values and drive a logic based on these values.

Automatic Voltage Control (AVC/RTCC)

Automatic voltage control monitors the voltage of a power transformer and keeps the load voltage in the controlled setting value. This control is performed using a control IED which sends control output to a tap -changer for the transformer. A signal can be sent to raise or lower the tap, depending on voltage setting.

SPECIAL PANELS

Annunciator & Marshalling Kiosk Panel

These panels are used to display substation signals and provide continuous signal recording and printing.

Mosaic Control Panel

This device is used to control switching equipment and the measurement of energy in all bays. The control and indicator arrangement are constructed of mosaic tiles on the front side of the panel. The use of tiles allow for easy modification and bay extension for future expansion.

Metering Panels

These panels are used to measure energy for tariffs.

Data Retrieval / Station Evaluation Panel (DTR/SEP)

The DTR/SEP Panels relay in all panels to ensure seamless communication through one system. It is used to download and upload data from remote area protection and management equipment at a master station headquarters.

Programmable Logic Controller (PLC) Panels

Our programmable logic controller panels feature sophisticated programming logic using the most popular PLC brands. Interposing Relay Panels (IRP)

An interposing relay panel is used to send signals and status between the control centre and electrical components such as motor control centers, motors, pumps, lighting, and so on.


Our Partners Find Us Contact Us

Head Office: Canada Ph: +1 416-798-2511(Canada)

11 Dansk Court +1 (855)437-1387 (USA) Toronto Sales: [email protected] Ontario M9W 5N6 Enquiries: [email protected]

www.rtsperfectplant.com

USA Office 1997 Annapolis Exchange Parkway, Suite 300 Annapolis MD 21401

Brazilian Office Rua Francisco Dias Velho 66

Brooklin, Sao Paulo SP CEP 04581 -000

Our

Customers

as an independent protection and control specialist, rts

Documents