1

Artist: unknown. Purchased from a commercial site.

Design: This little fan angel is constructed with three-pieces-of-wood. The body is one-piece: the wings are another piece and the halo is the third. The wings and halo are stapled onto the backside of the body.

Timber: unknown.

2

Artist: unknown. Purchased from a commercial site.

Design: This cute little fan alligator is constructed from two-pieces-of-wood: one for the body, the other for the fans.

Timber: unknown

3

Artist: unknown. Purchased from a commercial site.

Design: This “good luck” fan bird is constructed from two-pieces-of-wood. One is the bird’s body and tail: the other is the wings. The tail is positioned into a rounded style. The wings compliment the tail with a sweeping curve. A thread is woven through the interlock to stabilize the construction.

Timber: unknown

4

Artist: unknown. Purchased from a commercial site.

Design: This “good luck” fan bird is constructed with two-pieces-of-wood. The bird’s body and tail are one-piece and the wings are the other piece that is nestled down into the first. The tail is a flat fan: the wings have a slight sweep up toward the head. A thread is woven through the interlock for stability.

Timber: unknown