zenithinteriors.comzenithinteriors.com

Artica

zenithinteriors.com

ArticaArtica is a soft seating family with clean, minimalist lines.

ARTICA LOUNGE CHAIR AND DINING CHAIRFEATURES The clean, minimalist lines of the Artica family are available as a lounge chair in four leg and a four legged dining chair.

FINISHESFully upholstered in approved contract fabric, vinyl or leather. Lounge chair and sofa are available with removable covers, all models are available with the choice of stainless steel or white lacquered base.

CERTIFICATION

DESIGN Rafa Garcia

KEZ-2015FF2.0i-2006

Furniture & Fi�ngs

zenithinteriors.com

ARTICA LOUNGE CHAIR AND DINING CHAIR

STANDARD & OPTIONAL FEATURES/FINISHES

DINING CHAIR

LOUNGE CHAIR4 LEG BASE

Timber frame • •Fully upholstered • •Removable cover --- •Stainless steel base • •White lacquered base • • • Standard feature – Not available + Optional feature

DIMENSIONS

Artica dining chair

Artica lounge chair-4 leg

Artica lounge chair-swivel base

Artica sofa

450760

590

590

590590

450

760

670670

460

470

760

670670

460

450760

1260670

460

640

670

500

670

450640

670

500

670

640450

670

1090

1260

640

zenithinteriors.com

ARTICA LOUNGE CHAIR AND DINING CHAIRCARE & MAINTENANCESTAINLESS STEEL (POLISHED OR SATIN)Do not use abrasive materials. Clean the surface with a soft cloth and alcohol.ALUMINIUM (POLISHED, SATIN OR ANODISED)Use a solution of water and alcohol and a soft cloth. Dry well and do not use abrasive materials.CHROMED AND NICKEL-PLATED These finishes require specific care to avoid the formation of oxide coating on the surface. Therefore, for chrome-plated surfaces, we recommend that you regularly clean the surface with a soft cloth impregnated in alcohol and then dry the surface well. For nickel-plated surfaces, we recommend that you regularly clean them with a wet cloth and dry immediately. Do not use abrasive materials.EPOXY FINISHES In order to avoid the formation of oxide coating, we recommend that you regularly clean the surface with a soft cloth impregnated in alcohol and then dry immediately. Do not use abrasive materials.LACQUERED FINISHESIn order to avoid the formation of oxide coating, we recommend that you regularly clean the surface with a soft cloth impregnated in alcohol and then dry immediately. Do not use abrasive materials.NATURAL FINISH (BEECH, MUKALI, OAK OR ASH)We recommend that you regularly clean the surface with a soft cloth and specific products for wood. Do not use abrasive materials.STAINED FINISH (BEECH, MUKALI, OAK OR ASH)We recommend that you regularly clean the surface with a soft cloth and specific products for wood. Do not use abrasive materials.LACQUERED FINISHES (MDF)We recommend that you regularly clean the surface with a soft cloth and specific products for wood. Do not use abrasive materials.POLYREY FINISHESClean the Polyrey surface with a soft cloth and with appropriate products for wood.Do not use abrasive products.GLASSAvoid the use of abrasive materials that can alter or scratch the surface. Always use soft cloths. For tempered and acid-treated glass, especially on the lacquered or acid-treated side, it is recommended that you use a soft cloth, slightly dampened with water.TEXTILES – GENERALVacuum fabric regularly using an upholstery attachment, and low suction or brush with a firm upholstery brush. Turn & rotate loose cushions regularly. Treat spills and stains as soon as possible. Gently blot spills away with a dry cloth. Do not apply any liquid cleaner to the fabric as this may result in permanent marking. Dry in the shade away from direct heat and sunlight. Allow to dry thoroughly before reuse. Avoid exposure of fabrics & leather to direct sunlight, as this is likely to cause fading & damage.LEATHERRemove any dust in order to facilitate the natural breathing of leather. To do so, it is recommended to use a soft, dry cloth. Do not use bristles that may damage the surface. Avoid prolonged direct exposure to sunlight or direct heat sources in order to preserve the natural humidity and colour of the leather. In order to avoid leather dehydration and maintain its elasticity, it is recommended that you regularly (every 6 months) apply special creams for furs; pay special attention to areas that are more exposed to use, such as seats, arms and the top section of the back piece. Removing stains is very difficult. However, good results can be obtained by applying soapy water (a neutral soap) with a soft cloth right away. It must be rinsed properly and immediately dried. Do not, under any circumstances, use alcohol, acetone, detergents or any other type of abrasive substances.