Preservation By Design®

SHORT Implant

For More Information, Please Contact Your Local BIOMET 3i Sales Representative.

Challenging Clinical Cases

In areas with minimal bone height, providing implant treatment may require complex surgicalprocedures, such as:

• A sinus lift procedure in the maxilla

• Vertical ridge augmentation in the mandible due to the proximity to the mandibular nerve

3i T3 Surface

Blasted and acid-etched implant surface with an average roughness of 1.4µm on the full length of the implant.2

Reduced vertical bone height above the inferior alveolar nerve canal.

Initial Bone-to-Implant Contact (IBIC)

The dimensions of the surgical instrumentation and the 3i T3 Short Implant provide a tight implant-to-osteotomy fit, to assist with primary stability.1

The 3i T3® Short Implant’s length and features provide a familiar surgical protocol without the need for vertical grafting procedures in some

challenging clinical cases:

1. Gubbi P†, Towse R†. Quantitative and Qualitative Characterization of Various Dental Implant Surfaces. Poster Presentation: European Association for Osseointegration, 20th Annual Meeting; October 2012; Copenhagen, Denmark. To view the poster, please visit www.biomet3i.com/Pdf/Posters/Poster_421_EAO_Final.pdf

2. Meltzer AM‡. Primary stability and initial bone-to-implant contact: The effects on immediate placement and restoration of dental implants. J Implant Reconstr Dent. 2009;1(1):35-41.

3. Boitel N, Andreoni C, Grunder U‡, Naef R, Meyenberg K‡. A Three Year Prospective, Multicenter, Randomized-Controlled Study Evaluating Platform-Switching for the Preservation of Peri-implant Bone Levels. Academy of Osseointegration, 26th Annual Meeting: 2011 March 3-5; Washington DC. To view the poster, please visit www.biomet3i.com/Resource%20Center/Publications%20of%20Interest/Platform_Switching_for_the_Preservation_of%20Peri_Implant%20Bone%20Levels.pdf. A BIOMET 3i sponsored study.

† The authors conducted this research while employed at BIOMET 3i. ‡ Dr.’s Grunder, Meltzer and Meyenberg have f inancial relationships with BIOMET 3i LLC resulting from speaking

engagements, consulting engagements and other retained services.

Platform switching* of the implant can help preserve crestal bone.3

Minimal bone height under the maxillary sinus.

* Placement of a smaller diameter restorative component than the diameter of the implant seating surface.

Introducing the SHORT Implant

Introducing the SHORT Implant

4. Gubbi P†, Towse R†. Quantitative and Qualitative Characterization of Various Dental Implant Surfaces. Poster Presentation: European Association for Osseointegration, 20th Annual Meeting; October 2012; Copenhagen, Denmark. To view the poster, please visit www.biomet3i.com/Pdf/Posters/Poster_421_EAO_Final.pdf

†The authors conducted this research while employed at BIOMET 3i.

New surgical kit designed specifically to support site preparationand placement of 3i T3® Short Implants

Coarse and fi ne micron surface features are designed to create an average mean surface roughness value of 1.4µm along the

full length of the implant.4

Coarse and f ine micron features

Coarse:(10+ microns)via resorbable calcium phosphate media blast

Fine:(1-3 microns)via Dual Acid-Etching (DAE) on top of the blasted surface

Option for nano-scale features along the full length of the implantvia Discrete Crystalline Deposition (DCD®) of calcium phosphate

* This product is not available in the United States of America. This product is also not available in certain other markets. Please contact your local BIOMET 3i Sales Representative for availability in your market.

Surgical Kit - BSISK*

NEW!

Global Headquarters4555 Riverside DrivePalm Beach Gardens, FL 334101-800-342-5454Outside the U.S.: +1-561-776-6700Fax: +1-561-776-1272www.biomet3i T3.com

BIOMET 3iDental Iberica S.L.WTC Almeda Park, Ed. 1, Planta 1ªPl. de la Pau, s/n08940, Cornellà de Llobregat(Barcelona) SpainPhone: +34-93-470-55-00Fax: +34-93-371-78-49

3i T3, DCD and Preservation By Design are registered trademarks of BIOMET 3i LLC. Providing Solutions – One Patient At A Time is a trademark of BIOMET 3i LLC. ©2014 BIOMET 3i LLC.

All trademarks herein are the property of BIOMET 3i LLC unless otherwise indicated. This material is intended for clinicians only and is NOT intended for patient distribution. This material is not to be redistributed, duplicated, or disclosed without the express written consent of BIOMET 3i. For additional product information, including indications, contraindications, warnings, precautions, and potential adverse effects, please visit the BIOMET 3i Website: www.ifu.biomet3i.com.

ART1237REV A 07/14

JoinUs

FollowUs

WatchUs

DownloadIt

EC REP

* This product is not available in the United States of America. This product is also not available in certain other markets. Please contact your local BIOMET 3i Sales Representative for availability in your market.

SHORT Implant Ordering Information:

Description Item #

6mm(D)

5mm(D)

Description Item #

5mm(D) x 5mm(L) BOES5055mm(D) x 6mm(L) BOES506

6mm(D) x 5mm(L) BOES6056mm(D) x 6mm(L) BOES606

Description Item #

6mm(D)

5mm(D)

Description Item #

5mm(D) x 5mm(L) BNES5055mm(D) x 6mm(L) BNES506

6mm(D) x 5mm(L) BNES6056mm(D) x 6mm(L) BNES606

External Hex Implants With DCD®*External Hex Implants*

For More Information, Please Contact Your Local BIOMET 3i Sales Representative.

Want to learn more about using 3i T3® Short Implants in challenging clinical cases?

VISIT:www.biomet3i.com