arocs - intercounty truck & van ltd · 2019. 12. 20. · om473 15.6l displacement inline 6-cylinder...
TRANSCRIPT
-
ArocsRange Guide
− Construction industry transport − On-road and off-road − 18t – 250t
-
Product groups
Standard models- Optimised for power, robustness and efficiency- Fully configurable with a wide range of cabs
and engines- Available with air suspension or steel suspension- Suitable for on-road or on/off-road work,
depending on model
Grounder- Designed for heavy-duty applications. Capable
of handling extreme loads or extreme terrain- Reinforced chassis- Heavy-duty steel suspension- High capacity axles up to 16t available on
some models- Off-road wheels and tyres available
(20" and 24" sizes)- Available as Tractor, Rigid, Tipper and Concrete
Mixer chassis- Higher design weights are possible - up to 22t, 35.8t
or 44.8t for 2, 3, and 4 axle vehicles respectively- Note that the legal maximum weights in the UK
remain unchanged (maximums of 18t, 26t and 32t respectively)
- Heavy-duty air suspension models (e.g. 2033 L, 3363 LS) are also available, and share most features of the Grounder range, although they are not referred to as Grounder models
Loader- Provides high payload capability for concrete mixer
and some tractor unit applications- Some restrictions on configuration: - 8x4/4 concrete mixer and 4x2 tractor units only - 7.7L and 10.7L engines (up to 335kW/456hp) - Special lightweight equipment
Heavy-haulage- Gross Combination Weights in excess of 44t are
available with appropriate equipment. Selection of this equipment is done only through the choice of a control code and is not retrofittable:
– G0A – GCM 44 - 68t– G0B – GCM 44 - 80t– G0C / G0D - GCM 44 - 120t, G0D over
120t (double drive axles)For more information, and for weights in excess of these, please contact Product Management.- Operation at the maximum axle loads allowed under UK STGO legislation is not possible on every model. Correct specification of the vehicle frame, axles, suspension, trailer couplings, wheels and tyres is essential
- An appropriate choice of driveline must also be made to suit the customer and application. This is not automatic and involves selection of the correct engine, clutch (or Turbo Retarder Clutch), gearbox, drive programme, axles and axle ratio
Loader
-
Rigid wheel configurationStandard
Steel SuspensionRigid Tipper Mixer
4x218xx
3600-660018xx K
3600-6600
4x418xx A
3600-450018xx AK
3600-4500
6x2/4
6x2
6x426xx
3600-570026xx K
3300-540026xx B
3300-4200
6x6
8x2/4
8x4/432xx
4250-635032xx K
4250-635032xx B*
4250-6050
8x4
8x6/4
8x8/4
All intermediate wheelbases are available at 300mm intervals
*Also available as a Loader model**Also available as a Heavy-duty air suspension model
Wheelbase
-
Standard GrounderAir Suspension Steel Suspension
Rigid Tipper Mixer Rigid Tipper Mixer
18xx L3600-6600
18xx LK3300-6600
20xx**3300-6600
20xx K**3300-6600
20xx A3600-4500
20xx AK3600-4500
25xx L VLA (22.5”)3150-4050
25xx L ENA3900-6000
26xx L DNA3900-6000
26xx L3600-5700
26xx LK3300-5400
33xx**3600-5700
33xx K3300-5400
33xx A3600-5100
33xx AK3600-4200
32xx L ENA4250-6050
32xx L4250-6350
32xx LK4250-6350
32xx LB* 4250-6050
41xx4250-6350
41xx K4250-6350
41xx B4250-6050
32xx L ENA3600-5700
32xx LK ENA3600-5700
32xx LB ENA3600-5700
41xx K4550-6050
41xx AK4850-5450
-
Tractor wheel configuration
Available overhangs are shown in blue*Also available as a Loader modelWheelbase
Standard Grounder Heavy-DutySteel Suspension Air Suspension Steel Suspension Air Suspension
4x2 18xx LS*330036003900
750 / 1050
20xx S3300360039001000
20xx LS330036003900
750 / 1050
4x4 18xx AS3300360039001000
20xx AS3300360039001000
6x2/2 25xx LS VLA(22.5”)2550
1050
6x2/4 25xx LS VLA(22.5”)2550
1050
6x2 25xx LS ENA33003450
750
26xx LS DNA33003450
750
6x4 26xx S3300345036003900750
26xx LS330034503900
750
33xx S3300345036003900750
33xx LS330034503900
750
6x6 33xx AS360039004200750
8x4/4 SLT 41xx S SLT3900
750
8x6/4 SLT 41xx AS SLT4200
750
8x8/4 SLT 41xx AS SLT4200
750
-
EnginesDesignation Power Rating Torque Gearboxes*
kW / hp @ rpm Nm @ rpm
OM9367.7L displacementInline 6-Cylinder
xx24 175 / 238 2200 1000 1200-1600PowerShift 3 Automated Transmission8 Speed Overdrive12 Speed Direct Drive
Synchromesh Manual Transmission 9 Speed Direct Drive
xx27 200 / 272 2200 1100 1200-1600
xx30 220 / 299 2200 1200 1200-1600
xx32 235 / 320 2200 1300 1200-1600
xx35 260 / 354 2200 1400 1200-1600
OM47010.7L displacementInline 6-Cylinder
xx33 240 / 326 1600 1700 1100PowerShift 3 Automated Transmission12 Speed Direct Drive12 Speed Overdrive16 Speed Overdrive
Synchromesh Manual Transmission16 Speed Direct Drive16 Speed Overdrive
xx36 265 / 360 1600 1800 1100
xx40 290 / 394 1600 1900 1100
xx43 315 / 428 1600 2100 1100
xx46 335 / 456 1600 2200 1100
OM47112.8L displacementInline 6-Cylinder
xx42 310 / 421 1600 2100 1100
xx45 330 / 449 1600 2200 1100
xx48 350 / 476 1600 2300 1100
xx51 375 / 510 1600 2500 1100
xx53 390 / 530 1600 2600 1120
OM47315.6L displacementInline 6-Cylinder
xx52 380 / 517 1600 2600 1100PowerShift 3 Automated Transmission12 Speed Direct Drive12 Speed Overdrive16 Speed Overdrive
Synchromesh Manual Transmission16 Speed Overdrive
xx58 425 / 578 1600 2800 1100
xx63 460 / 625 1600 3000 1100
*Gearboxes available depend on model, GVM, engine rating and driveline ratios
-
Cabs
Dimensions (mm) Availability
Length Width Engine Tunnel Headroom Beds
A B Std Max
CompactSpace M 2300 320 1065 1400 0 1*
2300 170 1215 1400 0 1*
ClassicSpace S 1700 2300 320 1310 1400 0 0
2300 170 1460 1400 0 0
M 2000 2300 320 1310 1600 0 1*
2300 170 1460 1600 0 1*
L 2300 2300 320 1310 1600 1 1
2300 170 1460 1600 1 1
2300 Flat 1640 1600 1 1
StreamSpace L 2300 2300 320 1635 1840 1 2
2300 170 1785 1840 1 2
2300 Flat 1970 1840 1 2
2500 Flat 1970 1830 1 2
BigSpace L 2300 2500 Flat 1990 1910 1 2
Many Arocs models can be specified for on-road or off-road operation. This affects legal requirements including safety systems, spray suppression and front underride protection.On-road – Vehicle category N3 – Code V0SAll models with
-
Issued by Mercedes-Benz Truck Marketing, Tongwell, Milton Keynes, MK15 8BA. Telephone 0800 090 090. www.mbtrucks.co.uk
The contents of this brochure are not binding and the right is reserved to make modifications without notice. Please consult your local Mercedes-Benz Dealer for further information. MBT059/November 2019.
Paint zones
Cab Paint LZ31Mirrors
LZ33Grille
LZ37Detachable Cab Parts
LZ38Front Bumper
LZ40Air Deflector & Side Collars
LZ43Side Collars
LZ44Air Deflector
LZ46Door Extensions & Toolboxes
Additional paint codes:LZ50 Chassis Note that wheel hubs and fuel tank straps remain in MB7350 nova grey
LZ71 Platform or tipper body painting Only with factory supplied body
LZ55 Wheels
F6V MirrorCam bracket, top cover chrome, lower cover painted in cab colour. This option code additionally paints the trim cover at the bottom of the window. The MirrorCam arm always remains black