armatex sf 15 - insulation manufacturermid-mountain.com/wp-content/uploads/datasheets/armatex sf...

1
Mid-Mountain Materials, Inc. • Telephone (800) 382-2208 (206) 762-7600 • Fax (206) 762-7694 PO Box 800 • 2731 - 77th Avenue SE, Suite 100 • Mercer Island, WA 98040 [email protected] • www.mid-mountain.com THE FINAL BARRIER AGAINST ABRASION, CHEMICALS AND HEAT ARMATEX ® SF 15 SILICONE COATED FIBERGLASS ARMATEX ® SF 15 SILICONE COATED FIBERGLASS is comprised of a light weight per square yard. ARMATEX ® SF 15 SILICONE COATED FIBERGLASS does not sup- ® SF 15 SILICONE COATED FIBERGLASS is an ideal choice for protection of equipment and personnel. This product is not suitable for outdoor use. AVERAGE PHYSICAL PROPERTIES Coating Cured Silicone Rubber Color Various Tensile Strength, lbs/in, nominal Bursting Strength, psi 329 Thickness, inches, nominal 0.016 Temperature Rating Base Fabric 1000°F 538°C Coating 450°F 232°C Weight, oz/sy, nominal 16 Width, inches 60 (+/- 5%) Standard Roll Size 50 LY MIL-I 24244 MIL-Y-1140 MIL-I-24244 ASTM E162 E84.84a Tolerance is +/- 10% unless otherwise stated. The technical data presented herein are indicative of representative No warranties are expreSFed or implied as application conditions are beyond our control.

Upload: vuongnguyet

Post on 21-May-2018

213 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Armatex SF 15 - Insulation Manufacturermid-mountain.com/wp-content/uploads/datasheets/Armatex SF 15.pdfARMATEX® SF 15 SILICONE COATED FIBERGLASS is comprised of a light weight per

Mid-Mountain Materials, Inc. • Telephone (800) 382-2208 • (206) 762-7600 • Fax (206) 762-7694PO Box 800 • 2731 - 77th Avenue SE, Suite 100 • Mercer Island, WA 98040

[email protected] • www.mid-mountain.com

THE FINAL BARRIER AGAINST ABRASION,CHEMICALS AND HEAT

ARMATEX® SF 15SILICONE COATED FIBERGLASSARMATEX® SF 15 SILICONE COATED FIBERGLASS is comprised of a light weight

per square yard. ARMATEX® SF 15 SILICONE COATED FIBERGLASS does not sup-

® SF 15 SILICONE

COATED FIBERGLASS is an ideal choice for protection of equipment and personnel.

This product is not suitable for outdoor use.

AVERAGE PHYSICAL PROPERTIES

Coating Cured Silicone Rubber

Color Various

Tensile Strength, lbs/in, nominal

Bursting Strength, psi 329

Thickness, inches, nominal 0.016

Temperature Rating

Base Fabric 1000°F • 538°C

Coating 450°F • 232°C

Weight, oz/sy, nominal 16

Width, inches 60 (+/- 5%)

Standard Roll Size 50 LY

MIL-I 24244 • MIL-Y-1140

MIL-I-24244 • ASTM E162 •E84.84a

Tolerance is +/- 10% unless otherwise stated.

The technical data presented herein are indicative of representative

No warranties are expreSFed or implied as application conditions are beyond our control.