architecture // branding // concept // design // interiors...
TRANSCRIPT
CAT B Layout Plan
GROUND Floor Plan
1:100 @ A3 1:50 @ A1
GROUND Floor Plan
1:100 @ A3. 1:50 @ A1
CLIENT:Place2Be - Asset management development team
PROJECT
13//14 - ANGEL GATE326 City Road,London, EC1V 2PT.
Architecture // Branding // Concept // Design // Interiors
mail // [email protected] mobile // 07989555882 www // c3mstudio.com
PROCUREMENT TEAM
MAIN CONTRACTOR TBC
SPECIALIST LIFT CONTRACTOR TBC
STRIP OUT WORKS AMBIT
PROJECT MANAGEMENT QUEST COST
MEP CONSULTANT WATTS*
STRUCTURAL ENGINEER HAYNE TILLET STEEL*
APPROVED INSPECTOR JMP *
PD / CDM SHORE ENGINEERING *
ARCHITECT c➂M studio
REF: Drawing Name:
Drawing Description:
Scale:
Notes:
Do not scale from this drawing except via scale bar and for pricing purposes only.
Check all dimensions on site before fabrication or setting outThis document is copyright and may not be reproduced without permission
All existing drawings have been produced with survey information supplied by Place2Be.
Survey information is authored by previous fit out Architect
C3M Studio take no responsibility for the accuracy of the information produced.
Revision Reason For Issue Date
COM STUDIO3
00 01 04 02 00 01 04 02
N
SALES PLAN
CAT B Layout Plan
First Floor Plan
1:100 @ A3 1:50 @ A1
FIRST Floor Plan
1:100 @ A3. 1:50 @ A1
CLIENT:Place2Be - Asset management development team
PROJECT
13//14 - ANGEL GATE326 City Road,London, EC1V 2PT.
Architecture // Branding // Concept // Design // Interiors
mail // [email protected] mobile // 07989555882 www // c3mstudio.com
PROCUREMENT TEAM
MAIN CONTRACTOR TBC
SPECIALIST LIFT CONTRACTOR TBC
STRIP OUT WORKS AMBIT
PROJECT MANAGEMENT QUEST COST
MEP CONSULTANT WATTS*
STRUCTURAL ENGINEER HAYNE TILLET STEEL*
APPROVED INSPECTOR JMP *
PD / CDM SHORE ENGINEERING *
ARCHITECT c➂M studio
REF: Drawing Name:
Drawing Description:
Scale:
Notes:
Do not scale from this drawing except via scale bar and for pricing purposes only.
Check all dimensions on site before fabrication or setting outThis document is copyright and may not be reproduced without permission
All existing drawings have been produced with survey information supplied by Place2Be.
Survey information is authored by previous fit out Architect
C3M Studio take no responsibility for the accuracy of the information produced.
Revision Reason For Issue Date
COM STUDIO3
00 01 04 02 00 01 04 02
N
SALES PLAN
CAT B Layout Plan
SECOND Floor Plan
1:100 @ A3 1:50 @ A1
SECOND Floor Plan
1:100 @ A3. 1:50 @ A1
CLIENT:Place2Be - Asset management development team
PROJECT
13//14 - ANGEL GATE326 City Road,London, EC1V 2PT.
Architecture // Branding // Concept // Design // Interiors
mail // [email protected] mobile // 07989555882 www // c3mstudio.com
PROCUREMENT TEAM
MAIN CONTRACTOR TBC
SPECIALIST LIFT CONTRACTOR TBC
STRIP OUT WORKS AMBIT
PROJECT MANAGEMENT QUEST COST
MEP CONSULTANT WATTS*
STRUCTURAL ENGINEER HAYNE TILLET STEEL*
APPROVED INSPECTOR JMP *
PD / CDM SHORE ENGINEERING *
ARCHITECT c➂M studio
REF: Drawing Name:
Drawing Description:
Scale:
Notes:
Do not scale from this drawing except via scale bar and for pricing purposes only.
Check all dimensions on site before fabrication or setting outThis document is copyright and may not be reproduced without permission
All existing drawings have been produced with survey information supplied by Place2Be.
Survey information is authored by previous fit out Architect
C3M Studio take no responsibility for the accuracy of the information produced.
Revision Reason For Issue Date
COM STUDIO3
00 01 04 02 00 01 04 02
N
SALES PLAN
CAT B Layout Plan
Third Floor Plan
1:100 @ A3 1:50 @ A1
THIRD Floor Plan
1:100 @ A3. 1:50 @ A1
CLIENT:Place2Be - Asset management development team
PROJECT
13//14 - ANGEL GATE326 City Road,London, EC1V 2PT.
Architecture // Branding // Concept // Design // Interiors
mail // [email protected] mobile // 07989555882 www // c3mstudio.com
PROCUREMENT TEAM
MAIN CONTRACTOR TBC
SPECIALIST LIFT CONTRACTOR TBC
STRIP OUT WORKS AMBIT
PROJECT MANAGEMENT QUEST COST
MEP CONSULTANT WATTS*
STRUCTURAL ENGINEER HAYNE TILLET STEEL*
APPROVED INSPECTOR JMP *
PD / CDM SHORE ENGINEERING *
ARCHITECT c➂M studio
REF: Drawing Name:
Drawing Description:
Scale:
Notes:
Do not scale from this drawing except via scale bar and for pricing purposes only.
Check all dimensions on site before fabrication or setting outThis document is copyright and may not be reproduced without permission
All existing drawings have been produced with survey information supplied by Place2Be.
Survey information is authored by previous fit out Architect
C3M Studio take no responsibility for the accuracy of the information produced.
Revision Reason For Issue Date
COM STUDIO3
00 01 04 02 00 01 04 02
N
SALES PLAN