UV LAMPSTATUS

PW-AF-032419

Planet Water’s AquaFill Drinking Water Solutionprovides establishments that have an existing‘unpotable’ water supply, the capability to purifythis water to drinking water quality standards.

The AquaFill system also includes four (4) waterdispensing units that can be positioned at fourdifferent locations in the building for convenientwater access using reusable water bottles.

4-Stage Filtration

Ultrafiltration (UF) Membrane (0.01 Micron)

Mesh Filter (60 Microns)

Activated Carbon Filtration

Ultraviolet (UV) Disinfection (at Dispenser POU)

Four, high outputXylem (FloJet)

pumps on-board

Aluminum, diamond plate lockable

enclosure

Door mountedinput and outputpressure gauges

UF filterhollow fibermembrane

Chlorinecleaning

input

Meshfilter

Air purgehand pump forfilter cleaning

Activatedcarbon filter

Electriccontrol boxA/C to D/Cconverter

Suppliesbox

Automaticfilter flushsolenoid

PW-AF-032419

With the AquaFill system, drinking water isdistributed throughout the facility by four, wallmount, point-of-use water dispensers.

Each dispenser is equipment with the following:

• Stainless steel, corrosion-proof enclosure.

• Plastic components made with antimicrobialmaterial that inhibits the growth of mildewand mold

• UV disinfection - which concludes stage 4 ofAquaFill’s filtration process at the point-of-use.

• UV lamp status indicator lights that providefeedback on when to replace the UV bulb.

• Optical bottle sensor for ease of filling andhands-free operation.

• Water dispensing with a smooth, laminar flowthus minimizing splashing when filling.

• A spill area that hooks directly to a drain hose.

• An LED display that communicates ‘plastic’water bottle waste saved based on theamount of water dispensed.

UV Lamp statusindicator lights

Optical bottlesensor

Waterdispenser

Spill areaand drain

Stainlesssteel

enclosure

Ultraviolet (UV)Disinfection

Chamber

UV LAMPSTATUS

PW-AF-032419

Filtration System Specification

Item Specification

Enclosure dimensions 130 * 80 * 38 cm

Enclosure material Aluminium plate

UF membrane material Modified PVC

UF membrane fiber ID/OD dimension 1.0mm and 1.7mm

UF filtration precision 100,000 daltons

UF membrane area 12.5 m2

Working pressure 0.1 to 0.3 MPa

pH tolerance range 2 to 12

Applicable water temperature 5 to 40�

Designed water production flow 1,200 liters per hour

Source water turbidity ≤ 15 NTU

Filtrate water turbidity < 0.5 NTU

Silt Density Index (SDI) < 1.0

Microbial pathogen removal rate > 99.99%

Cleaning process Chlorine liquid soak + air purge

Filtration system power source input 110V - 240V / 50 - 60 Hz

Water pump quantity (units) 4 units, one for each dispensing unit

Water pump power rating (each unit) 120 W for each pump

Back flush solenoid valve frequency 30 seconds flush every 30 minutes

Low pressure shutdown protection Below 0.1 MPa

High pressure shutdown protection Above 0.3 Mpa

Dispensing Unit Specification

PW-AF-032419

Item Specification

Enclosure dimensions 65 * 46 * 14cm (21cm with tray)

Enclosure material Stainless steel (18 gauge)

Mounting type Wall mount

Water access area material ABS plastic (Silver ion, anti-microbial)

Designed water production flow 5 liters per minute

Activation sensor Electronic / no-hands

Auto shut-off timer setting 20 seconds

Power source input 110V - 240V / 50 - 60 Hz

System rating For Indoor use only

UV lamp status LED indicator lights (3)

UV dosage (uW-sec/sm2) >30,000

UV sterilization rate 99.90%

UV chamber Stainless steel (polished)

UV lamp rated life 8,000 hours