approved weathering systems for the cladding industry ... · jones & woolman (u.k.) limited...

9
Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias and Features

Upload: lytuyen

Post on 27-Jul-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

Jones & Woolman (U.K.) LimitedEstablished 1979

Approved Weathering Systemsfor the Cladding Industry

Architectural Fascias and Features

Page 2: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

contents

1introduction

Jones & Woolman (U.K.) Limited is at the leading edge of claddingpenetrations and weathering systems for the construction industry. Theflexibility of our unique system gives benefits over traditional weatheringsystems and are achievable on site at the installation stage. Ourweathering system accommodates all types of cladding.

The specially developed weathering systems have been successfullytested using accelerated weathering tests, ie heat ageing, water immersion,freeze/thaw cycling and uv light cycling by British Steel (now Corus) inrelation to long term adhesion, ageing and weather-scaling performance.

The company carries out all its own installations in order to keep a tightcontrol over site procedures. Site application difficulties have beenovercome by development of surface preparation agents and additivesfor adjusting the curing properties according to ambient conditions.

Our systems allow the hole to be cut wherever the opening is requiredand the soaker is made to fit, regardless of the positions of crowns andtroughs or profile shape. The roofing contractor does not need to takeinto account obstructions and can order soakers without detailed surveysor measurements. Penetrations weathered within 300mm of opening, norequirement to flash back to the ridge.

■ Comprehensive warranty up to 25 years

■ Systems approved by Kingspan & other leading manufacturers

■ Fully compliant with current building regulations

■ BS EN ISO 9001: 2000 Quality accreditation

■ Full manufacturing and installation facilities

■ Full design, advice and site surveys, including curb loading andstructural trimmer requirements

■ QA+ AWM Pioneer Insured Guarantee Scheme approved contractor

■ Installations throughout the UK, Ireland and in Europe

Structural weathering at Bradford City Football Club. numerous columns, ties andother structural steels needed to be aesthetically pleasing as well as effectivelyweatherproofed.

High level GRP nosing and fascia panels, supplied and fitted at Valley ShoppingCentre, Dublin.

Typical installation weathered within 300mm of penetration.

Steelwork penetrations through membrane roof.

introduction

load bearing curbs

non-load bearing upstands for flues andducts, sunpipes, louvre vents, etc

in-situ weathering

access hatches, rooflights, roof windows, etc

weathering structures

weathering to vertical cladding

GRP fascias and architectural features

PVC and polypropylene fabrications

1

2

3

4

5, 6

7

8, 9

10,11

11

Page 3: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

2 load bearing curbs

3non-load bearing upstands for flues and ducts,sunpipes, louvre vents, etc

Typical J & W Installation

■ Form the opening■ Fit curb upstand, can be perpendicular to

the floor or to the roof pitch■ Fit internal liners if required■ Weather the roof and curb, including

drainage and water deflection■ Fit input unit (window, fan, hatch etc) if

required.

The roof cladding can be completed sothat it is weathertight, we then form theopening and complete the weathering at amore convenient time.

Our systems are designed to allow themounting and fixing of ancillary equipment byus or others.

Allows for last minute positional changes.

There is no restriction in size, shape or positionrelative to the roof profile.

We can advise on the need for additionalstructural trimmers, these are oftenunnecessary.

Internal finishes are aesthetically pleasing.Using data from composite sheetmanufacturers we can determine by calculationif additional structural trimmers are required.

Typical J & W Installation

■ Form the opening■ Fit upstand, can be perpendicular to the

floor or to the roof pitch■ Weather the roof and upstand, including

drainage and water deflection.

The roof cladding can be completed sothat it is weathertight, we then form theopening and complete the weathering at amore convenient time.

Allows for last minute positional changes.

There is no restriction in size, shape or positionrelative to the roof profile.

SVP complete by J & W – we also supply andfit a range of natural air vents.

This installation shows louvre vents skewedacross the roof but perpendicular to the floor.

Sunpipes and louvre vents.

Page 4: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

4 in-situ weathering

5access hatches, rooflights, roof windows, etc

A significant area of our work involves in-situweathering. Our systems are virtuallymaintenance free and carry our full warrantyup to a period of 25 years. Cost effectivesolutions to difficult details.

This installation shows a plantroom withweathering and GRP enclosures.

We also design and fit valley gutters, rakingand hips.

These images show a before and after in-situweathering installation.

Jones & Woolman (UK) Ltd can supply and fit awide range of roof units or we can make & fitload bearing curbs to suit customers units.

We have a unique installation system for Veluxand similar windows such that this type of unitcan be installed in all types of roofs includinglow pitch roofs.

These images show a number of 1200mmdiameter polycarbonate roof lights on loadbearing curbs, and an internal view showing aliner, all supplied and fitted by Jones &Woolman (UK) Ltd. No additional structuraltrimmers are required.

This installation shows an access hatch withpolycarbonate dome. Options includepolycarbonate pyramids and insulatedaluminium lids, load bearing curb andweathering.

This image shows a 3m x 3m clear openingremovable access cover, designed and fitted byJones & Woolman (UK) Ltd.

Page 5: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

6 access hatches, rooflights, roof windows, barrel vaults

7weathering to structures

Our unique inclined load bearing curbsystem allows Velux and similar windows tobe installed in all types of low pitch roofs. Thistype of window normally requires a roof pitchof at least 15 deg.

This image shows windows on KingspanKS1000RT.

We have successfully completed theweathering of a large number of stadia wherecolumns, supports, ties, struts etc penetratevarious cladding including composite, singleskin, in plane grp rooflight areas, both roof andvertical walls.

Amongst our sites are: Manchester United,Charlton Athletic, Swansea City, West HamUnited, Bradford City, Walsall F.C., and DundalkGreyhound Stadium.

Page 6: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

8 weathering to vertical cladding

9weathering to vertical cladding

We have developed systems for individual andmultiple penetrations thro’ various claddingsystems. The images show our installation at amedical facility in London.

The system was fully pressure tested. Theimages show multiple and single weatheredpenetrations during testing at Windtech inTelford.

This part elevation shows just some of the 400plus penetrations.

These images show two of the completedpenetrations at the medical facility in London.

The images represent just a few of the manyinstallations that we have successfullycompleted throughout the UK, Ireland andEurope.

Page 7: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

10 GRP fascias and architectural features

11GRP fascias and architectural features

PVC and polypropylene fabrications

GRP lends it self well to the forming ofcomplex shapes and curves often unachievablein PPC steel or aluminium. We can offertechnical advice to ensure an aestheticallypleasing and economical solution. The imagesshow a small selection of completed contracts.

The image shows a GRP entrance canopy.Survey, design, make, fit and in-situ weatheringall by Jones & Woolman (UK) Ltd. The flexibilityof our systems overcame steelwork setoutdiscrepancies.

The images show GRP feature & weathering, aGRP canopy and GRP column facings.

The GRP bullnose was manufactured to finishthe prow of a prestigious building nearManchester. The installer was unable toachieve the desired shape in aluminium.

The images show more examples of GRPfascias, features, and internal GRP columns– including award winning projects.

We are experts in the design and manufactureof plastic fabrications.

Page 8: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

12 contact us

TELEPHONE +44 (0) 1922 712111

FAX +44 (0) 1922 712539

EMAIL SALES [email protected]

SALES [email protected]

CONTRACTS [email protected]

TECHNICAL [email protected]

TECHNICAL [email protected]

GENERAL [email protected]

WEB www.jonesandwoolmanuk.com

Jones & Woolman (U.K.) Limited

Croxstalls Road, Bloxwich, Walsall

West Midlands WS3 2XU

Page 9: Approved Weathering Systems for the Cladding Industry ... · Jones & Woolman (U.K.) Limited Established 1979 Approved Weathering Systems for the Cladding Industry Architectural Fascias

Jones & Woolman (U.K.) LimitedCroxstalls Road, Bloxwich, Walsall, West Midlands WS3 2XU

Tel: +44 (0) 1922 712111 Fax: +44 (0) 1922 712539

Email: [email protected] www.jonesandwoolmanuk.com