Application Information DetailsDAYLIGHTING

Lighting Application Sciences, LLCJennifer@lasllc.net

July 2012

1 of 2

Job Name: Rep. Agency Name: Address: Telephone: Fax: Email:

1. A scaled or dimensioned site plan via e-mail• Drawing files (.dwg) are preferred and will provide the quickest turn-around.• Drawings that must be traced will require a longer turn-around time.• Dwg files should have any x-refs bound and be clean as possible of layers and blocks which are not necessary for the lighting layout.• Clearly mark the areas to be illuminated.

2. Layout Type Daylight only (skip #3 if daylight only) Daylight and electric light

3. Fixture type(s): Specify each luminaire type on your projectEach manufacturer: Source: HPS MH CF LED Other: Wattage: Required MaximumMounting height: Required MaximumLight loss factor: IES file (or file number if available):

4. Window Glass InformationColor: Transmissivity:

Transparent Diffused Reflectance:

ExteriorWall color:

Type of activity:

Adjacent building hts:

Latitude/Longitude:

Orientation:

Time of day:

Date:

Sky condition:(Reference chart on page 2)

Or send copies of marked cut sheets

Or send copies of marked cut sheets

5. Site InformationInterior

Reflectances: / /

Areas considered for daylighting:

Type of activity:

Readings taken: at grade ′ above grade

Room dimensions:

Length: Width: Height:

Owner or code requirements:

For prompt and accurate lighting layouts, please provide as much information as you have available

Application Information DetailsDAYLIGHTING

Lighting Application Sciences, LLCJennifer@lasllc.net

July 2012

2 of 2

7. RevisionsMark up the previous lighting layout using Adobe PDF, CAD, or handwritten notes, then send the document to us electronically; include the job’s reference number in the subject of the email.

8. Other Project Information

6. In order to correctly calculate daylight conditions, provide building sections with the following:• Roof geometry• Overhangs• Interior ceiling elements and/or height changes• Locations and dimensions of light passage elements (i.e.

windows, skylights, clerestories

• Exterior shading elements (i.e. porches, building mounted shades)

• Permanent furniture within rooms (i.e. kitchen counters, built-in cabinets

A.I.D.D. TIPSRECOMMENDATIONS FOR SITE CONDITIONS

TIPS is a list of recommendations for site elements that will be considered in daylighting calculations.

DaylightingWeather Conditions:

Time of Day: 9:00am; 12:00pm; 3:00pm or a combinationExact Dates: We recommend a date in either summer, winter, or both.

Site Location:Orientation: Clearly mark on plan: North, South, East, WestSky Settings: If a sky setting is not chosen, daylighting will be calculated using one of the partly cloudy choices.

Type Gradation Group Indicatrix Group Description of luminance distribution1 I 1 CIE Standard Overcast Sky

Steep luminance gradation towards zenith, azimuthal uniformity2 I 2 Overcast, with steep luminance gradation and slight brightening towards the sun3 II 1 Overcast, moderately graded with azimuthal uniformity4 II 2 Overcast, moderately graded and slight brightening towards the sun5 II 1 Sky of uniform luminance6 III 2 Partly cloudy sky, no gradation towards zenith, slight brightening towards the sun.7 III 3 Partly cloudy sky, no gradation towards zenith, brighter circumsolar region8 III 4 Partly cloudy sky, no gradation towards zenith, distinct solar corona9 III 2 Partly cloudy, with obscure sun10 IV 3 Partly cloudy, with brighter circumsolar region11 IV 4 White-blue sky with distinct solar corona12 V 4 CIE Standard Clear Sky, low luminance turbidity13 V 5 CIE Standard Clear Sky, polluted atmosphere14 VI 5 Cloudless turbid sky with broad solar corona15 VI 6 White-blue turbid sky with broad solar corona