application for approval of additional equipment for approval of additional equipment applicant to...
TRANSCRIPT
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Jen French/JP Creignou
Address 134 Riviera Way NE, St. Petersburg FL. 33704
Telephone 07774919184, 727 894-9714
Email [email protected]/[email protected]
SKUD 18 Hull / Sail No. 051
Name of equipment Chute hatch cover
Description of equipment’s function To stop water from entering the spinnaker chute
Relationship to control points N/A
Dimensions Triangular shape of the SKUD 18 bow, Mark II
Construction materials and method Sail cloth material
Method of fixing equipment to boat Fixed with self tapers and bungee cord
Ability to remove the equipment whilst afloat The equipment cannot be removed during racing
Is this a one-off or will it be produced in quantity X One-Off Production
If for production, who will manufacture the equipment?
Comments This application is referencing application number 76-290611 approved on June 30, 2011.
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 141-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Jen French/JP Creignou
Address 134 Riviera Way NE, St. Petersburg FL. 33704
Telephone 07774919184, 727 894-9714
Email [email protected]/[email protected]
SKUD 18 Hull / Sail No. 051
Name of equipment Crew Seat Adjuster Mounts
Description of equipment’s function
Hold crew seat in place and adjusts for movement fore and aft on original tracks
Relationship to control points Control points do not change
Dimensions Quick release levers
Construction materials and method Stainless steel and plastic
Method of fixing equipment to boat Locking levers to seat track
Ability to remove the equipment whilst afloat Bolted using original seat track
Is this a one-off or will it be produced in quantity X One-Off Production
If for production, who will manufacture the equipment? N/A
Comments
Will allow crew to move fore and aft independently (cannot adjust while racing). Adaptation for easy levers to compensate for visual impairment. This application is referencing application number 35_220807 approved May 12, 2008 and 97_070812 approved August 8, 2012.
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 142-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Jen French/JP Creignou
Address 134 Riviera Way NE, St. Petersburg FL. 33704
Telephone 07774919184, 727 894-9714
Email [email protected]/[email protected]
SKUD 18 Hull / Sail No. 051
Name of equipment Foot hold and pedestal
Description of equipment’s function Hold helm feet in one place while sailing
Relationship to control points Control points do not change
Dimensions 8” x8” pedestal with Velcro
Construction materials and method Plastic and Velcro
Method of fixing equipment to boat Stainless steel bar secured to original tracks
Ability to remove the equipment whilst afloat
Unbolt from seat track (feet can easily be pulled from Velcro out of position by helmperson)
Is this a one-off or will it be produced in quantity X One-Off Production
If for production, who will manufacture the equipment? N/A
Comments
Will not prevent sailor from exiting the cockpit or seat. Keeps skipper comfortably in seat and maintains skippers ability to steer the boat especially in heavy wind conditions. This application is referencing application number 20_030707 approved July 3, 2007 and 102_130812 approved August 21, 2012.
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 143-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Jen French/JP Creignou
Address 134 Riviera Way NE, St. Petersburg FL. 33704
Telephone 07774919184, 727 894-9714
Email [email protected]/[email protected]
SKUD 18 Hull / Sail No. 051
Name of equipment Cleat bracket for kite uphaul cleat
Description of equipment’s function A bracket is mounted to the foredeck to hold the kite uphaul cleat
Relationship to control points After control point
Dimensions N/A
Construction materials and method Fiberglass
Method of fixing equipment to boat Stainless steel screws attach to the foredeck
Ability to remove the equipment whilst afloat Not without tools
Is this a one-off or will it be produced in quantity X One-Off Production
If for production, who will manufacture the equipment? N/A
Comments
Relocating of cleat for better ergonomics and easier to locate controls (especially for visually impaired sailors). This application is referencing application number 23_250707 approved August 8, 2007, 75_280611 approved on June 28, 2011.
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 144-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Jen French/JP Creignou
Address 134 Riviera Way NE, St. Petersburg FL. 33704
Telephone 07774919184, 727 894-9714
Email [email protected]/[email protected]
SKUD 18 Hull / Sail No. 051
Name of equipment Adjuster on jib tack
Description of equipment’s function
A stainless steel adjuster with line is attached between the bow fitting and the tack of the jib
Relationship to control points N/A
Dimensions N/A
Construction materials and method Stainless steel slug and standard line
Method of fixing equipment to boat Line
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity X One-Off Production
If for production, who will manufacture the equipment? N/A
Comments
The use of the adjuster allows the visually impaired crew to rig and unrig the jib, much more easily than the standard supplied shackles. This application is referencing application number 71_280611 approved on June 28, 2011.
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 145-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Jen French/JP Creignou
Address 134 Riviera Way NE, St. Petersburg FL. 33704
Telephone 07774919184, 727 894-9714
Email [email protected]/[email protected]
SKUD 18 Hull / Sail No. 051
Name of equipment Spin sheet block and cleat
Description of equipment’s function Replacement of spin sheet and block to harken fittings
Relationship to control points No control points changed
Dimensions N/A
Construction materials and method Harken
Method of fixing equipment to boat Bolted and shackle
Ability to remove the equipment whilst afloat N/A
Is this a one-off or will it be produced in quantity X One-Off Production
If for production, who will manufacture the equipment? Harken
Comments There is no change of control point. Hardware changed from Ronstan to Harken. This application is in reference to application 105_180812 approved August 21, 2012, 106_180812 approved August 21, 2012
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 146-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Brolgas
Description of equipment’s function
Brolga Rigging Screws
Relationship to control points
The Brolga rigging screws are used to adjust standing rigging (shrouds and lowers) tension of the Selden rigg. As crew Niki Birrell has impaired hand function on his right hand the Brolgas allow the crew to easily change side stay tension in between racing without assistance.
Dimensions For 3mm Dyform, 6mm diameter rigging screw. adjustment 45mm. Same tensile strength as Dyform
Construction materials and method As constructed by Brolga, stainless steel rigging screw
Method of fixing equipment to boat
Swaged on to rigging shrouds, and attached to chain plates by split pins.
Ability to remove the equipment whilst afloat Not able to remove whilst afloat
Is this a one-off or will it be produced in quantity One-Off X Production
If for production, who will manufacture the equipment?
Manufactured by Brolga http://www.apsltd.com/c-1329-calibratedturnbuckles.aspx
Comments As per application number 65_120611 & 98_070812
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 148-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Control line tails
Description of equipment’s function
Relationship to control points After
Dimensions
Construction materials and method Bungee cord attached to the end of the tails
Method of fixing equipment to boat
Bungee/tails run through saddles on each side of the boat and the bungee is tied off on the inboard side of the transom (as per photos)
Ability to remove the equipment whilst afloat
Is this a one-off or will it be produced in quantity One-Off Production
If for production, who will manufacture the equipment?
Comments As per application number 108_180812
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 148-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Cunningham S hooks
Description of equipment’s function
The hooks enable the Cunningham to be easily attached to the mainsail
Relationship to control points On top of Cunningham control line
Dimensions 50mm long
Construction materials and method S/S block
Method of fixing equipment to boat Tied
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 149-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Fairing pads under cowling
Description of equipment’s function
The pads create a smoother entry for the spinnaker when it gets retracted into the spinnaker bag
Relationship to control points Under front of cowling
Dimensions 200 x 300mm
Construction materials and method Closed cell foam
Method of fixing equipment to boat Glued
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity One-Off
If for production, who will manufacture the equipment?
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 150-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Floor grip tape
Description of equipment’s function The tape enables the sailors to maintain grip on the cockpit floor
Relationship to control points On cockpit floor
Dimensions 300 x 300mm
Construction materials and method Adhesive grip tape
Method of fixing equipment to boat Glued
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased form chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 151-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Halyard cleat and bag
Description of equipment’s function
Allows main halyard to be locked off without damaging the rope and mainsail and jib halyards to be stored without tangling..
Relationship to control points Allows main halyard to be locked off without damaging the rope and mainsail and jib halyards to be stored without tangling..
Dimensions N/A
Construction materials and method Stainless steel and mesh/sail cloth
Method of fixing equipment to boat
2 stainless bolts through the mast support post and two stainless screws to attach bag
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity One-Off
If for production, who will manufacture the equipment? NA
Comments
As per application number as per 70_190611. Replaces the plastic supplied cleat, which wears the rope and the combination of these two changes, allows the visually impaired crew to quickly release both halyards in an emergency.
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 152-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Jib backing line
Description of equipment’s function
Fixed length of line between jib traveler car and starboard end of jib track crew to prevent boat being stuck head to wind during tacking
Relationship to control points ixed to jib traveler car
Dimensions N/A
Construction materials and method
Spectra rope tied to jib traveler, lead through starboard end of jib track and tied off on control bar
Method of fixing equipment to boat
Rope is tied onto jib traveller car and tied around and taped to control bar
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity One-Off Production
If for production, who will manufacture the equipment? Used by crew to prevent boat being stuck head to wind during tacking
Comments As per application number 89_120112
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 153-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Adjustable jib tack
Description of equipment’s function
A stainless steel adjuster is attached between the bow fitting and the tack of the jib
Relationship to control points N/A
Dimensions N/A
Construction materials and method Stainless steel
Method of fixing equipment to boat Stainless steel pins
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity One-Off Production
If for production, who will manufacture the equipment? -
Comments As per application number 71_280611. The use of this adjuster with quick pins, allows the visually impaired crew to rig and unrig the jib, much more easily that the standard supplied shackels
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 154-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Keel bulb pin fairing
Description of equipment’s function The fairing fills in the bulb pin holes
Relationship to control points On bulb pins
Dimensions 10 x 10mm
Construction materials and method Polyester filler
Method of fixing equipment to boat Glued
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 155-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Keel, fin & bulb weight
Description of equipment’s function Keel (combined board and bulb)
Relationship to control points
Dimensions
Construction materials and method Lead shot, method provided from manufacturer.
Method of fixing equipment to boat
Ability to remove the equipment whilst afloat
Is this a one-off or will it be produced in quantity One-Off Production
If for production, who will manufacture the equipment?
Comments As per application number 82_081111, 72_280611 & 103_130812, permission is sought to repair the fins of both boats to bring them up to the maximum weight (163kgs) allowable by the class rules
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 156-300812
Date Received August 30 2012
Approved Yes No
Date Approved / Declined August 30 2012
Technical Committee Comments
Date Applicant Advised August 30 2012
Date Posted to Website August 30 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Removal of vang ram and replacement with standard vang system
Description of equipment’s function
Replacement of boom support strut on Mk 2 SKUD with standard kicking strap system, similar to what is on Mk 1 SKUD
Relationship to control points Kicking strap is mounted between boom and mast step
Dimensions N/A
Construction materials and method Rope and metal/plastic pulleys/eyelets
Method of fixing equipment to boat Stainless steel fixings and rope
Ability to remove the equipment whilst afloat Not without tools
Is this a one-off or will it be produced in quantity One-Off Production -
If for production, who will manufacture the equipment? -
Comments
As per application number 74_280611 & 80_060911. Many have already adopted the traditional vang system instead of the compression vang of the Selden mast. Using the MK I boom makes it simple to implement the traditional vang system. This will also allow legacy equipment to be used as spare.
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 157-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Rod Steering system
Description of equipment’s function
The rod steering system can be easily used by the helmsperson, with minimal play in the steering of the rudders, and load on the helmsperson
Relationship to control points Directly attached to the rudder arm
Dimensions Carbon fibre rod 20mm and 22mm of various lengths, and carbon fibre
Construction materials and method Carbon fibre plate and carbon fibre rod.
Method of fixing equipment to boat
Steering plates are fixed with rivets to the tiller arms. Rod steering is fixed with quick release pins and universal rubber joints to helm seat
Ability to remove the equipment whilst afloat Not without tools
Is this a one-off or will it be produced in quantity One-Off
If for production, who will manufacture the equipment?
Comments As per application number 66130611
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 158-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Rudder tie downs
Description of equipment’s function Prevent rudders from falling out of case
Relationship to control points On rudder cases
Dimensions 200mm long x 2
Construction materials and method Rope
Method of fixing equipment to boat Tied
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 159-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Spinnaker bag tabs
Description of equipment’s function Tabs lift the spinnaker bag off the floor of the boat
Relationship to control points On spinnaker bag
Dimensions 50mm
Construction materials and method Webbing
Method of fixing equipment to boat Sewn
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity One-Off
If for production, who will manufacture the equipment?
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 160-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Spinnaker chute cover
Description of equipment’s function
To keep water from entering the spinnaker chute
Relationship to control points N/A
Dimensions Triangular shape to fit SKUD 18 MK 2 bow
Construction materials and method Waterproof fabric
Method of fixing equipment to boat Lashed, glued and bungee cord
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity One-Off Production
If for production, who will manufacture the equipment?
Comments As per application number 109_180812
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 161-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Spinnaker halyard cleat
Description of equipment’s function A bracket is mounted to the foredeck to hold the kite uphaul cleat
Relationship to control points After control point
Dimensions Flat plate is approx 2 x 3 in
Construction materials and method Carbon fibre
Method of fixing equipment to boat Stainless steel screws attach the plate to the foredeck
Ability to remove the equipment whilst afloat Not without tools
Is this a one-off or will it be produced in quantity One-Off Production
If for production, who will manufacture the equipment? -
Comments As per application number 75_280611. Relocating of cleat for better ergonomics and easier to locate controls
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 162-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Spinnaker jam stopper
Description of equipment’s function
The loop stops the spinnaker head from jamming underneath the stay T balls on mast
Relationship to control points On mast side stay and fore stay fittings
Dimensions 100mm
Construction materials and method 4mm shock cord
Method of fixing equipment to boat Tied
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 163-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Rudder tie downs
Description of equipment’s function Prevent rudders from falling out of case
Relationship to control points On rudder cases
Dimensions 200mm long x 2
Construction materials and method Rope
Method of fixing equipment to boat Tied
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 164-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Spinnaker sheet cleats
Description of equipment’s function
Cleats fitted to cleat port and starboard spinnaker sheets to stop them from falling over the side of the board and dragging in the water.
Relationship to control points N/A
Dimensions As per photo
Construction materials and method Ronstan cleats
Method of fixing equipment to boat Bolted/screwed
Ability to remove the equipment whilst afloat
Is this a one-off or will it be produced in quantity One-Off Production
If for production, who will manufacture the equipment?
Comments As per application number 105_180812
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 165-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Park St, MONA VALE, NSW 2103, AUSTRALIA
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, AUS064, AUS 025
Name of equipment Adjustable spinnaker tack line
Description of equipment’s function
Adjust the length of the Spinnaker tack line to optimize trimming of sail is the same as current system with addition of a cleat for adjustment
Relationship to control points No control point currently defined
Dimensions 14 ft long
Construction materials and method 4mm spectra line and off the shelf cam cleat or V cleat
Method of fixing equipment to boat
Line starts at tack of spinnaker run inside the pole with knot at 36.4 inches then run back to cleat. End of line tied for safety. A floating block may be used at end of tack line for 2:1 purchase
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity One-Off
If for production, who will manufacture the equipment?
Comments As per application number 59_041110. It is the same as current system with addition of a cleat for adjustment
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 166-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Plastic removed off spreader adjusters
Description of equipment’s function This allows for the spreaders to be adjusted to meet the class rules
Relationship to control points On mast spreaders
Dimensions 100mm long
Construction materials and method Plastic
Method of fixing equipment to boat Removed
Ability to remove the equipment whilst afloat N/A
Is this a one-off or will it be produced in quantity One-Off
If for production, who will manufacture the equipment?
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 167-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Rubber shoe on spreader ends
Description of equipment’s function To prevent spinnaker from tearing on spreader ends
Relationship to control points On spreader ends
Dimensions 100mm long
Construction materials and method Plastic
Method of fixing equipment to boat Tape
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 168-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Tacking line indicators on deck
Description of equipment’s function The indicators are used for judging lay lines
Relationship to control points On side deck
Dimensions 300 x 300mm
Construction materials and method Plastic
Method of fixing equipment to boat Glued
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 169-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Teflon tape on front of mast
Description of equipment’s function The tape allows for the sail to slide more easily over the mast
Relationship to control points On bottom of mast
Dimensions 400mm long
Construction materials and method Teflon tape
Method of fixing equipment to boat Glued
Ability to remove the equipment whilst afloat Yes
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 170-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Daniel Fitzgibbon
Address 13/18-20 Part St, Mona vale 2103, NSW Australia
Telephone 61434992828
Email [email protected]
SKUD 18 Hull / Sail No. AUS 047, 025, 064
Name of equipment Wind indicator
Description of equipment’s function To indicate wind direction
Relationship to control points Top of mast
Dimensions 200 x 200mm
Construction materials and method Plastic
Method of fixing equipment to boat Screw
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity Production
If for production, who will manufacture the equipment? Can be purchased from chandlery
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 171-300812
Date Received August 30, 2012
Approved Yes No
Date Approved / Declined August 30, 2012
Technical Committee Comments
Date Applicant Advised August 30, 2012
Date Posted to Website August 30, 2012
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name Alexandra Rickham / Niki Birrell
Address WPNSA, Osprey Quay, Portland, UK DT5 1SA
Telephone
Email [email protected]
SKUD 18 Hull / Sail No. GBR045/057
Name of equipment Adjustable spinnaker tack line
Description of equipment’s function
Adjust the spinnaker tack line to optimism sail trim
Relationship to control points
Dimensions 2 meters of 4mm line. 2 meters 4mm shock cord
Construction materials and method 4mm line, cam cleat, pulleys, fairlead, shock cord
Method of fixing equipment to boat Bolts and self tappers
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity �yes One-Off � Production
If for production, who will manufacture the equipment?
Comments Standard system with cleat for tackling adjustability. Same as application 58.
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 172-230413
Date Received April 23, 2013
Approved Yes � No
Date Approved / Declined May 5, 2013
Technical Committee Comments Similar to Applications 58, 95 & 166
Date Applicant Advised May 6, 2013
Date Posted to Website May 6, 2013
Application for Approval of Additional Equipment Applicant to complete.
Applicant’s Name Marta Zanetti
Address Via San Mauro 5 - 34151 Trieste
Telephone +39 3398640541
Email [email protected]
SKUD 18 Hull / Sail No. ITA54
Name of equipment Crew seat.
Description of equipment’s function
Crew seat modified in accordance to new class rules July 2013.
Relationship to control points
Dimensions
Height max: cm 39,5 Width: cm 50 Depth of the seat: cm 40 Backrest and side of the seat: cm 13 Backrest and side: 100% of the seat width and length Weight: kg 6
Construction materials and method Mixer fiberglass and carbon
Method of fixing equipment to boat Attached to the standard tracks at 4 points with bolts.
Ability to remove the equipment whilst afloat If necessary.
Is this a one-off or will it be produced in quantity � One-Off
If for production, who will manufacture the equipment?
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 173_210713
Date Received July 21, 2013
Approved Yes � No
Date Approved / Declined August 7, 2013
Technical Committee Comments Subject to check at the IFDS Worlds Kinsale
Date Applicant Advised August 26, 2013
Date Posted to Website August 26, 2013
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name John McRoberts
Address 1269 McKenzie Ave, Victoria, BC, V8P 2L8 Canada
Telephone 250 661 7602
Email [email protected]
SKUD 18 Hull / Sail No. 58
Name of equipment Jib backing line
Description of equipment’s function
Fixed length of line between jib traveler car and starboard end of jib Track, used by crew to prevent boat being stuck head to wind during tacking
Relationship to control points Fixed to jib traveler car
Dimensions N/A
Construction materials and method
Spectra rope tied to jib traveler, lead through starboard end of jib track and tied off on control bar
Method of fixing equipment to boat
Rope is tied onto jib traveller car and tied around and taped to control bar
Ability to remove the equipment whilst afloat yes
Is this a one-off or will it be produced in quantity x One-Off Production
If for production, who will manufacture the equipment? N/A
Comments As per application number 89_120112
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 174_050713
Date Received July 5, 2013
Approved Yes No
Date Approved / Declined July 22, 2013 Technical Committee Comments
Date Applicant Advised July 29, 2013
Date Posted to Website July 29, 2013
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name John McRoberts
Address 1269 McKenzie Ave
Telephone 250 661 7602
Email [email protected]
SKUD 18 Hull / Sail No. 58
Name of equipment Adjustable spinnaker tack line 2:1
Description of equipment’s function
Adjust the length of the Spinnaker tack line to optimize trimming of sail, is the same as current system with addition of a cleat for adjustment
Relationship to control points No control point currently defined
Dimensions 14 ft long
Construction materials and method
4mm spectra line and off the shelf cam cleat or V cleat
Method of fixing equipment to boat
Line starts at tack of spinnaker run inside the pole with knot at 36.4 inches then run back to cleat. End of line tied for safety. A floating block may be used at end of tack line for 2:1 purchase
Ability to remove the equipment whilst afloat No
Is this a one-off or will it be produced in quantity x One-Off Production
If for production, who will manufacture the equipment? N/A
Comments As per application number 59_041110. It is the same as current system with addition of a cleat for adjustment
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 175_050713
Date Received July 5, 2013
Approved Yes No
Date Approved / Declined July 22, 2013 Technical Committee Comments
Date Applicant Advised July 29, 2013
Date Posted to Website July 29, 2013
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name John McRoberts
Address 1269 McKenzie Ave Victoria BC V8P 2L8 Canada
Telephone 250 661 7602
Email [email protected]
SKUD 18 Hull / Sail No. CAN058
Name of equipment Crew seat safety strap
Description of equipment’s function
To safely secure crew in seat, while on starboard tack & reach leg. crew has short stump, left leg amputation, causing profound lack of stability on starboard. For safety reasons we require a belt around crew's waist, which will be cleated on the starboard side only on starboard tack. This will only prevent crew falling whilst sailing, it will not project weight further to windward.
Relationship to control points N/A
Dimensions N/A
Construction materials and method N/A
Method of fixing equipment to boat
A block will be each attached to existing spinnaker sheet pad eye with a jam cleat on starboard deck aft of shrouds
Ability to remove the equipment whilst afloat N/A
Is this a one-off or will it be produced in quantity �x One-Off � Production
If for production, who will manufacture the equipment? N/A
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 176_220813
Date Received August 22, 2013
Approved Yes � No
Date Approved / Declined August 26, 2013
Technical Committee Comments
Date Applicant Advised August 26, 2013
Date Posted to Website August 26, 2013
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name John McRoberts
Address 1269 McKenzie Ave Victoria BC V8P 2L8 Canada
Telephone 250 661 7602
Email [email protected]
SKUD 18 Hull / Sail No. CAN058
Name of equipment Crew seat modification
Description of equipment’s function
Reduction of crew seat longitudinal dimension from 500mm to 450mm as per new Class Rules C.3.3.c, July 2013
Relationship to control points N/A
Dimensions N/A
Construction materials and method Cut back fibreglass of Hansa produced crew seat
Method of fixing equipment to boat N/A
Ability to remove the equipment whilst afloat N/A
Is this a one-off or will it be produced in quantity �x One-Off � Production
If for production, who will manufacture the equipment? N/A
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 177-220813
Date Received August 22, 2013
Approved Yes � No
Date Approved / Declined August 26, 2013
Technical Committee Comments
Date Applicant Advised August 26, 2013
Date Posted to Website August 26, 2013
Application for Approval of Additional Equipment Applicant to complete
Applicant’s Name John McRoberts
Address 1269 McKenzie Ave Victoria BC V8P 2L8 Canada
Telephone 250 661 7602
Email [email protected]
SKUD 18 Hull / Sail No. CAN058
Name of equipment Keel weight
Description of equipment’s function
Reduction of keel weight to 160 kg as per new Class Rules, C.8.3, July 2013
Relationship to control points N/A
Dimensions N/A
Construction materials and method Removed 3kg of ball bearings from keel fin
Method of fixing equipment to boat N/A
Ability to remove the equipment whilst afloat N/A
Is this a one-off or will it be produced in quantity �x One-Off � Production
If for production, who will manufacture the equipment? N/A
Comments
Detailed drawings, plans or photographs of the equipment including the position of equipment within the boat - Attach as JPG or PDF
Applicant should email the completed form and attachments to [email protected]
Administration Only
Application Number 178_220813
Date Received August 22, 2013
Approved Yes � No
Date Approved / Declined August 26, 2013
Technical Committee Comments
Date Applicant Advised August 26, 2013
Date Posted to Website August 26, 2013