api 572 practise question

58
API 572: Inspection of Pressure Vessels (Towers, Drums, Reactors, Heat Exchangers, and Condensers) PUSAT PEMBANGUNAN TENAGA INDUSTRI (PUSPATRI) 5 th – 9 th November 2007

Upload: marcos-domiciano

Post on 18-Apr-2015

342 views

Category:

Documents


19 download

TRANSCRIPT

Page 1: API 572 Practise Question

API 572: Inspection of Pressure Vessels

(Towers, Drums, Reactors, HeatExchangers, and Condensers)

PUSAT PEMBANGUNAN TENAGA INDUSTRI(PUSPATRI)

5th – 9th November 2007

Page 2: API 572 Practise Question

Sample of API 572 Question

46. Several different method are used to construct pressure vessel.

Most pressure vessel are constructed today using ____________construction.

1. Welded2. Hot forged3. Riveted4. Multilayer

Page 3: API 572 Practise Question
Page 4: API 572 Practise Question

Sample of API 572 Question

47. The most common material used to construct pressure vessel is:

1. Titanium2. Austenitic stainless steel3. Monel4. Carbon steel

Page 5: API 572 Practise Question
Page 6: API 572 Practise Question

Sample of API 572 Question

48. Construction codes are periodically revised as the design of

pressure vessel improve and as new construction materials become

available. A pressure vessel should be maintained according to the:

1. Requirements under which it was designed and constructed

2. Standards and specification of the owner/user3. Principle and specifications of the jurisdiction4. Guidelines of the NBIC

Page 7: API 572 Practise Question

Sample of API 572 Question

49. The basic reasons for inspection are:

1. To meet the pre-requisites of the ASME codes2. To fulfill the provisions of the API 5103. To satisfy the requirement of OSHA4. To determine the physical condition of the vessel and to

determine the type, rate and causes of deterioration.

Page 8: API 572 Practise Question
Page 9: API 572 Practise Question

Sample of API 572 Question

50. Metal losses are not always constant but are a function of such variables as:

1. Chemicals, caustic, inorganic and organic acids2. Excessive pressure3. Low temperature4. None of the above

Page 10: API 572 Practise Question
Page 11: API 572 Practise Question

Sample of API 572 Question

51. Erosion is the attrition of a surface caused by:

1. Loss of material caused by sulfur and chloride2. Attrition of material cased by acid or caustic attack3. The impingement of solid particles or liquid drops4. Wearing down of a material caused by oxidation.

Page 12: API 572 Practise Question
Page 13: API 572 Practise Question
Page 14: API 572 Practise Question

Sample of API 572 Question

101. Which of the following is the principal method of inspecting non-

metallic linings?

• UT• Spark testing• Visual• Profile radiofraphy

Page 15: API 572 Practise Question

Sample of API 572 Question

52. Many problems with pressure vessel are caused by faulty fabrication. Which item on the following list is not related to

faulty fabrication.

1. Poor welding2. Chloride stress corrosion cracking3. Improper heat treatment4. Dimensional tolerance

Page 16: API 572 Practise Question
Page 17: API 572 Practise Question

Sample of API 572 Question

92. Which of the following are causes of faulty fabrication?

• Improper fit• Poor welding• Improper heat treatment• All the above

Page 18: API 572 Practise Question
Page 19: API 572 Practise Question

Sample of API 572 Question

53. The external inspection of a pressure vessel should start with:

1. Vessel foundation and anchor bolts2. Ladders, stairways, platforms or walkways connected or

bearing on the vessel3. Nozzles and connecting piping4. Protective coating and insulation.

Page 20: API 572 Practise Question
Page 21: API 572 Practise Question

Sample of API 572 Question

54. If an internal inspection of a vessel is not the initial one, the first

step is to:

1. Make a walk around visual check of the vessel2. Review the previous records of the vessel to be inspected3. Check with the vessel operators for unusual operating

conditions4. Make a preliminary manway inspection

Page 22: API 572 Practise Question
Page 23: API 572 Practise Question

Sample of API 572 Question

88. What API standard is used for air cooled heat exchangers?

• 945• 510• 574• 661

Page 24: API 572 Practise Question
Page 25: API 572 Practise Question

Sample of API 572 Question

93. External inspections of pressure vessels should start with which of

the following:

• Ladders, stairways• Ladders, foundations• Guy wires, support• Nozzles, anchor bolts

Page 26: API 572 Practise Question
Page 27: API 572 Practise Question

Sample of API 572 Question

95. The condition of concrete support is determined by

• RT• Hydrostatic testing• Hammering• Visual inspection with some picking and scrapping

Page 28: API 572 Practise Question
Page 29: API 572 Practise Question

Sample of API 572 Question

97. “U” bolts on guy wires should be installed so that the “U” bolts is

against the:

• Either live or dead end of wire• Live or long end of wire• Dead or short end of wire• None of the above

Page 30: API 572 Practise Question
Page 31: API 572 Practise Question

Sample of API 572 Question

94. The most important conditions to check when examining metallic

linings are:

• That there is no corrosion• That no holes or cracks exist• That linings are properly installed• All the above

Page 32: API 572 Practise Question
Page 33: API 572 Practise Question

Sample of API 572 Question

Which of the following is not a tool for measuring thickness of vessel

shells?

1. Acoustic emission transducers2. Ultrasonic instrument3. Radiography with steps gages4. Corrosion button and depth drilling

Page 34: API 572 Practise Question
Page 35: API 572 Practise Question

Sample of API 572 Question

98. Temporary repairs to scattered pitting may be made by using

which of the following;

• Epoxy based materials• Metallic linings• Concrete• rubber

Page 36: API 572 Practise Question
Page 37: API 572 Practise Question

Sample of API 572 Question

Creep is dependent upon three factors. Two of these factors are:

• Stress, pH• Pressure time• Stress, time• Temperature, pressure

Page 38: API 572 Practise Question
Page 39: API 572 Practise Question

Sample of API 572 Question

101. Which of the following is the principal method of inspecting non-

metallic linings?

• UT• Spark testing• Visual• Profile radiofraphy

Page 40: API 572 Practise Question
Page 41: API 572 Practise Question

Sample of API 572 Question

103: Excess thickness in a vessel can result from which of the Following?

• Temperature increase• Corrosion allowance• Using nominal plate thickness in lieu of exact value

calculated• Number 2 & 3

Page 42: API 572 Practise Question
Page 43: API 572 Practise Question

Sample of API 572 Question

104. The selection of tools for the measurement of thickness depends on several factors. One of these is:

• Accuracy desired• Temperature of surface• Type of product contained in the vessel.• Cleanliness of surface to be examined.

Page 44: API 572 Practise Question
Page 45: API 572 Practise Question

Sample of API 572 Question

105. Which of the following is the most important factor in determining the frequency of inspection interval?

• The erosion rate at critical sections• The rate of deterioration and the remaining corrosion

allowance• The rate of deterioration and the remaining thickness• The Operating temperature and pressure

Page 46: API 572 Practise Question
Page 47: API 572 Practise Question

Sample of API 572 Question

106. Which of the following is not likely location of corrosion for a

heat exchanger?

1. Where dissimilar metals are in close contact2. On the external surface of the shell3. On the outside surface of tubes midway between baffles4. On the bottoms of shells in contact with non-corrosive

deposits

Page 48: API 572 Practise Question
Page 49: API 572 Practise Question

Sample of API 572 Question

123. A pressure vessel is in service and has no corrosion data available. Where should thickness readings be taken?

1. At least one of each shell course, head and nozzle2. One in each quadrant of each shell course and head3. One in each quadrant on each shell course at one-foot

intervals4. At one foot spacing on each shell course

Page 50: API 572 Practise Question
Page 51: API 572 Practise Question

Sample of API 572 Question

129. What cleaning methods would apply for wet sulfide cracking?

1. Power wire brushing2. Power chipping3. Hot water, steaming and abrasive grit blasting4. High pressure water blasting

Page 52: API 572 Practise Question
Page 53: API 572 Practise Question

Sample of API 572 Question

Page 54: API 572 Practise Question
Page 55: API 572 Practise Question
Page 56: API 572 Practise Question
Page 57: API 572 Practise Question

Sample of API 572 Question

Page 58: API 572 Practise Question