antik series - westcoast windows...the westcoast open out antik range offers a choice of top hung,...
TRANSCRIPT
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
AN
TIK
S
ER
IES
A N T I K S E R I E S
OPEN OUT WINDOWS
OPEN OUT DOORS
The Antik series combines a traditional look with modern design. Beautiful, stylish windows that will add character to your home.
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
‘U’ values are calculated in accordance with EN ISO 10077-2. Table declares 28mm double glazed/36mm triple glazed values.
All Westcoast windows are manufactured to specification. The product selector summarises tested and calculated performance
achievable by category and may vary according to frame size, glazing specification and other factors. For specific performance data,
please consult Westcoast Windows technical support department.
A N T I K W I N D O W S PRODUCT SELECTOR
Open OutWindows
Open In Windows
U-ValueW / m2K
Acoustic Attenuation
Secured by Design
Internal Cleaning
Internal Maintenance
30 Minute Fire Rating
TSG180 Top Hung Reversible 4 1.4/1.2 44 4 4 4 4
TSG45 Top Hung Projecting 4 1.4/1.2 44 4 4 4
SSG90 Side Hung Projecting 4 1.4/1.2 44 4 4 4
SHG Side Hung 4 1.4/1.2 44 4
THG Top Hung 4 1.4/1.2 44
BHG Bottom Hung 4 1.4/1.2 44
FKG Fixed Light 4 1.4/1.2 44 4 4
SBDUvalue
OPEN OUT
OPEN IN
The Westcoast open out Antik range offers a choice of top hung, side hung and bottom
hung windows including casements hung on butts, 90o projecting and fully reversible hinge
mechanisms, together with a range of suited fixed lights and insulated panels.
Simple to operate and with an elegant traditional ovolo styling, the system provides slim
transom and mullion details between all types of opening windows, fixed lights and panels,
together with moulded glazing bar options.
dB
AN
TIK
S
ER
IES
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T S G 1 8 0 TOP HUNG REVERSIBLE WINDOW
APPLICATION
For multi-storey buildings where cleaning and/or reglazing is to be
carried out internally.
FUNCTION
The concealed projecting reversible hinge allows the sash to be fully
reversed with all the action externally so the operation of the sash
never interferes with curtains, blinds or internal fitments.
The easy glide mechanism incorporates integral safety restrictors
which automatically engage when opening and when in the fully
reversed cleaning position. Concealed multipoint espagnolette
locking provides superior closing tightness for weatherproofing and
acoustic attenuation and offers a secure night ventilation position.
IRONMONGERY
Concealed Hinges: Top swing reversible hinges incorporating integral
opening and fully reversed (cleaning position) restrictors.
Espagnolette: Concealed multipoint locking wedge bolts with night
vent position receivers.
Handle: Satin anodised espagnolette handle.
A wide range of optional ironmongery items are available,
please contact us for further information.
Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.
The red line on the above graph indicates the minimum frame sizes that will provide an unobstructed area of 0.33m2 and at least 450mm high and 450mm wide, in order to satisfy the requirements of Approved Document B.
200400
600
800
1000
1200
1400
1600
1800
400 600 800 1000 1200
= Min/Max sizes
W1400 1600 1800 2000
H
ANTIK
SBD 44dBU1.4
U1.2
HEAD
CILL
JAMB
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T H E S Y S T E M S TA N DA R D S
CONSTRUCTION
Composite construction combining extruded aluminium alloy
profiles to EN AW 6060-T6 and close grained, laminated North
European Redwood, durability Class 3 as defined in BS EN 350.
Other timber species can be specified.
Timber frame and casement sections are precision machined
and assembled with pinned and glued comb joints. Mullions and
transoms are assembled with mortice and tenon joints.
External aluminium frame profiles are assembled with sealed
mitred joints by means of crimped angle cleats, bonded with PIB
tape and mechanically fixed with stainless steel pins to internal
timber members.
Windows are fully weatherstripped with EPDM or silicone slot seals.
MANUFACTURE
All windows and doors are purpose made to specification in
accordance with BS 644 : 2009 and EN 14351-1 : 2006.
APPEARANCE
Aluminium profiles are chemically pre-treated and powder coated
in any standard RAL colour in accordance with BS 6496 : 1984.
Standard gloss level 75% +/- 5%. Other gloss levels can be specified.
Timber is fully factory finished with a two or three coat spray
applied water based clear lacquer gloss level 35%, paint to NCS/
RAL specification gloss level 40% or a wide range of standard stain
finishes gloss level 35%.
GLASS AND GLAZING
Windows and doors are factory double or triple glazed to
specification in accordance with BS 6262 : 1982 with 28mm, 36mm
or 48mm dual sealed units constructed to EN 1279-2 : 2002 and
safety glazed where applicable in accordance with BS 6206 : 1981
and Building Regulation 2000 Approved Document K.
Products are typically externally bead glazed employing a drained
and ventilated glazing system with sealed units incorporating warm
edge composite super spacers and argon gas filling as standard.
Sealed units are supported on setting blocks and dry glazed with
EPDM gaskets.
All commercially available high performance glass types can
be specified to meet particular requirements for thermal
insulation, acoustic attenuation, solar control, safety, security
and fire protection where applicable.
PERFORMANCE
All Westcoast products can be considered as genuinely high
performance but frame size, glazing and other factors can, however,
directly affect performance levels. Westcoast technical support
staff should be consulted if particular data is required or for advice
on how to achieve the most cost effective solution for specific
performance targets.
WEATHERTIGHTNESS
Products comply with the following minimum performance standards
when tested in accordance with:
EN 1026 : 2000 (air permeability)
EN 1027 : 2000 (watertightness)
EN 12211 : 2000 (wind resistance)
Air Permeability: 600 Pa (Class 4)
In accordance with EN 12207 : 2000
Watertightness: 900 Pa (Class E900)
In accordance with EN 12208 : 2000
Wind Resistance: 2000 Pa (Class A5)
In accordance with EN 12210 : 2000
Exposure Category : 2000
In accordance with BS 6375 : Part 1 : 2009
THERMAL INSULATION
Products can be glazed to provide whole window ‘U’ values ranging
from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO
10077-2 : 2012.
ACOUSTIC ATTENUATION
Double and triple glazed products can be specified to achieve tested
sound reductions in a range from 31 to 48dB(Rw) in accordance with
EN ISO 10140- 2 : 2012.
SECURED BY DESIGN
All principle products have been tested to comply with PAS 24: 2016.
FIRE RESISTANCE
A selection of fixed and opening lights are classified EI45 and EI245
in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to
EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.
TESTING
A continuous programme of internal and 3rd party independent
testing ensures that Westcoast products remain at the very forefront
of fenestration technology.
INSTALLATION
Westcoast windows and doors are supplied to site fully factory
finished and glazed for installation into prepared openings.
A comprehensive design and installation service is offered.
MAINTENANCE
Maintenance is limited to periodic washing of external aluminium and
glass surfaces with water containing a mild detergent. Internal timber
should be cleaned with a damp cloth or polished.
Ironmongery items are made from corrosion resistant materials
and require only annual inspection and lubrication of appropriate
moving parts.
Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T S G 4 5 TOP HUNG PROJECTING WINDOW
Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.
The red line on the above graph indicates the minimum frame sizes that will provide an unobstructed area of 0.33m2 and at least 450mm high and 450mm wide, in order to satisfy the requirements of Approved Document B.
200400
600
800
1000
1200
1400
1600
1800
400 600 800 1000 1200
= Min/Max sizes
W1400 1600 1800 2000
H
APPLICATION
For single storey buildings or high level balcony locations where
cleaning can be carried out from within the building and reglazing
is to be carried out externally.
FUNCTION
The window has a top hung open out action, the sash being hung on
a pair of concealed friction hinges. An opening angle of up to 80° can
be achieved to enable external surfaces to be cleaned from within the
building (max safe reach 850mm).
Concealed multipoint espagnolette locking provides superior closing
tightness for weatherproofing and acoustic attenuation and offers a
secure night ventilation position.
IRONMONGERY
Concealed Hinges: Top hung projecting friction hinges.
Espagnolette: Concealed multipoint locking wedge bolts with night
vent position receivers.
Handle: Satin anodised espagnolette handle.
A wide range of optional ironmongery items are available,
please contact us for further information.
ANTIK
SBD 44dBU1.4
U1.2
HEAD
CILL
JAMB
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T H E S Y S T E M S TA N DA R D S
CONSTRUCTION
Composite construction combining extruded aluminium alloy
profiles to EN AW 6060-T6 and close grained, laminated North
European Redwood, durability Class 3 as defined in BS EN 350.
Other timber species can be specified.
Timber frame and casement sections are precision machined
and assembled with pinned and glued comb joints. Mullions and
transoms are assembled with mortice and tenon joints.
External aluminium frame profiles are assembled with sealed
mitred joints by means of crimped angle cleats, bonded with PIB
tape and mechanically fixed with stainless steel pins to internal
timber members.
Windows are fully weatherstripped with EPDM or silicone slot seals.
MANUFACTURE
All windows and doors are purpose made to specification in
accordance with BS 644 : 2009 and EN 14351-1 : 2006.
APPEARANCE
Aluminium profiles are chemically pre-treated and powder coated
in any standard RAL colour in accordance with BS 6496 : 1984.
Standard gloss level 75% +/- 5%. Other gloss levels can be specified.
Timber is fully factory finished with a two or three coat spray
applied water based clear lacquer gloss level 35%, paint to NCS/
RAL specification gloss level 40% or a wide range of standard stain
finishes gloss level 35%.
GLASS AND GLAZING
Windows and doors are factory double or triple glazed to
specification in accordance with BS 6262 : 1982 with 28mm, 36mm
or 48mm dual sealed units constructed to EN 1279-2 : 2002 and
safety glazed where applicable in accordance with BS 6206 : 1981
and Building Regulation 2000 Approved Document K.
Products are typically externally bead glazed employing a drained
and ventilated glazing system with sealed units incorporating warm
edge composite super spacers and argon gas filling as standard.
Sealed units are supported on setting blocks and dry glazed with
EPDM gaskets.
All commercially available high performance glass types can
be specified to meet particular requirements for thermal
insulation, acoustic attenuation, solar control, safety, security
and fire protection where applicable.
PERFORMANCE
All Westcoast products can be considered as genuinely high
performance but frame size, glazing and other factors can, however,
directly affect performance levels. Westcoast technical support
staff should be consulted if particular data is required or for advice
on how to achieve the most cost effective solution for specific
performance targets.
WEATHERTIGHTNESS
Products comply with the following minimum performance standards
when tested in accordance with:
EN 1026 : 2000 (air permeability)
EN 1027 : 2000 (watertightness)
EN 12211 : 2000 (wind resistance)
Air Permeability: 600 Pa (Class 4)
In accordance with EN 12207 : 2000
Watertightness: 900 Pa (Class E900)
In accordance with EN 12208 : 2000
Wind Resistance: 2000 Pa (Class A5)
In accordance with EN 12210 : 2000
Exposure Category : 2000
In accordance with BS 6375 : Part 1 : 2009
THERMAL INSULATION
Products can be glazed to provide whole window ‘U’ values ranging
from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO
10077-2 : 2012.
ACOUSTIC ATTENUATION
Double and triple glazed products can be specified to achieve tested
sound reductions in a range from 31 to 48dB(Rw) in accordance with
EN ISO 10140- 2 : 2012.
SECURED BY DESIGN
All principle products have been tested to comply with PAS 24: 2016.
FIRE RESISTANCE
A selection of fixed and opening lights are classified EI45 and EI245
in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to
EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.
TESTING
A continuous programme of internal and 3rd party independent
testing ensures that Westcoast products remain at the very forefront
of fenestration technology.
INSTALLATION
Westcoast windows and doors are supplied to site fully factory
finished and glazed for installation into prepared openings.
A comprehensive design and installation service is offered.
MAINTENANCE
Maintenance is limited to periodic washing of external aluminium and
glass surfaces with water containing a mild detergent. Internal timber
should be cleaned with a damp cloth or polished.
Ironmongery items are made from corrosion resistant materials
and require only annual inspection and lubrication of appropriate
moving parts.
Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
S S G 9 0 SIDE HUNG PROJECTING WINDOW
Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.
The red line on the above graph indicates the minimum frame sizes that will provide an unobstructed area of 0.33m2 and at least 450mm high and 450mm wide, in order to satisfy the requirements of Approved Document B.
200400
600
800
1000
1200
1400
1600
1800
400 600 800 1000 1200
= Min/Max sizes
W1400 1600 1800 2000
H
APPLICATION
For single storey buildings or high level balcony locations where
cleaning can be carried out from within the building and reglazing is to
be carried out externally.
FUNCTION
The window has a side hung open out action, the sash being hung on
a pair of concealed friction hinges. An opening angle of 90° can be
achieved to enable external surfaces to be cleaned from within the
building (max safe reach 850mm).
Concealed multipoint espagnolette locking provides superior closing
tightness for weatherproofing and acoustic attenuation and offers a
secure night ventilation position.
IRONMONGERY
Concealed Hinges: Side hung projecting friction hinges.
Espagnolette: Concealed multipoint locking wedge bolts with night
vent position receivers.
Handle: Satin anodised espagnolette handle.
A wide range of optional ironmongery items are available,
please contact us for further information.
ANTIK
SBD 44dBU1.4
U1.2
HEAD
CILL
JAMB
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T H E S Y S T E M S TA N DA R D S
CONSTRUCTION
Composite construction combining extruded aluminium alloy
profiles to EN AW 6060-T6 and close grained, laminated North
European Redwood, durability Class 3 as defined in BS EN 350.
Other timber species can be specified.
Timber frame and casement sections are precision machined
and assembled with pinned and glued comb joints. Mullions and
transoms are assembled with mortice and tenon joints.
External aluminium frame profiles are assembled with sealed
mitred joints by means of crimped angle cleats, bonded with PIB
tape and mechanically fixed with stainless steel pins to internal
timber members.
Windows are fully weatherstripped with EPDM or silicone slot seals.
MANUFACTURE
All windows and doors are purpose made to specification in
accordance with BS 644 : 2009 and EN 14351-1 : 2006.
APPEARANCE
Aluminium profiles are chemically pre-treated and powder coated
in any standard RAL colour in accordance with BS 6496 : 1984.
Standard gloss level 75% +/- 5%. Other gloss levels can be specified.
Timber is fully factory finished with a two or three coat spray
applied water based clear lacquer gloss level 35%, paint to NCS/
RAL specification gloss level 40% or a wide range of standard stain
finishes gloss level 35%.
GLASS AND GLAZING
Windows and doors are factory double or triple glazed to
specification in accordance with BS 6262 : 1982 with 28mm, 36mm
or 48mm dual sealed units constructed to EN 1279-2 : 2002 and
safety glazed where applicable in accordance with BS 6206 : 1981
and Building Regulation 2000 Approved Document K.
Products are typically externally bead glazed employing a drained
and ventilated glazing system with sealed units incorporating warm
edge composite super spacers and argon gas filling as standard.
Sealed units are supported on setting blocks and dry glazed with
EPDM gaskets.
All commercially available high performance glass types can
be specified to meet particular requirements for thermal
insulation, acoustic attenuation, solar control, safety, security
and fire protection where applicable.
PERFORMANCE
All Westcoast products can be considered as genuinely high
performance but frame size, glazing and other factors can, however,
directly affect performance levels. Westcoast technical support
staff should be consulted if particular data is required or for advice
on how to achieve the most cost effective solution for specific
performance targets.
WEATHERTIGHTNESS
Products comply with the following minimum performance standards
when tested in accordance with:
EN 1026 : 2000 (air permeability)
EN 1027 : 2000 (watertightness)
EN 12211 : 2000 (wind resistance)
Air Permeability: 600 Pa (Class 4)
In accordance with EN 12207 : 2000
Watertightness: 900 Pa (Class E900)
In accordance with EN 12208 : 2000
Wind Resistance: 2000 Pa (Class A5)
In accordance with EN 12210 : 2000
Exposure Category : 2000
In accordance with BS 6375 : Part 1 : 2009
THERMAL INSULATION
Products can be glazed to provide whole window ‘U’ values ranging
from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO
10077-2 : 2012.
ACOUSTIC ATTENUATION
Double and triple glazed products can be specified to achieve tested
sound reductions in a range from 31 to 48dB(Rw) in accordance with
EN ISO 10140- 2 : 2012.
SECURED BY DESIGN
All principle products have been tested to comply with PAS 24: 2016.
FIRE RESISTANCE
A selection of fixed and opening lights are classified EI45 and EI245
in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to
EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.
TESTING
A continuous programme of internal and 3rd party independent
testing ensures that Westcoast products remain at the very forefront
of fenestration technology.
INSTALLATION
Westcoast windows and doors are supplied to site fully factory
finished and glazed for installation into prepared openings.
A comprehensive design and installation service is offered.
MAINTENANCE
Maintenance is limited to periodic washing of external aluminium and
glass surfaces with water containing a mild detergent. Internal timber
should be cleaned with a damp cloth or polished.
Ironmongery items are made from corrosion resistant materials
and require only annual inspection and lubrication of appropriate
moving parts.
Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
S H G SIDE HUNG WINDOW
Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.
The red line on the above graph indicates the minimum frame sizes that will provide an unobstructed area of 0.33m2 and at least 450mm high and 450mm wide, in order to satisfy the requirements of Approved Document B.
200400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
400 600 800 1000 1200
= Min/Max sizes
W1400 1600 1800 2000
H
APPLICATION
For all building types where there is no requirement for internal
cleaning or reglazing.
FUNCTION
The traditional side hung open out action provides large unobstructed
openings and is particularly suitable for ground floor and balcony
locations or for escape purposes.
IRONMONGERY
Butt Hinges: Satin anodised finish with integral hinge protection.
Espagnolette: Concealed multipoint locking wedge bolts with night
vent position receivers.
Friction Stay: 90° handle operated hold open friction stay.
Handle: Satin anodised espagnolette handle.
A wide range of optional ironmongery items are available, including
Swedish traditional stormhook and latch devices.
ANTIK
SBD 44dBU1.4
U1.2
HEAD
CILL
JAMB
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T H E S Y S T E M S TA N DA R D S
CONSTRUCTION
Composite construction combining extruded aluminium alloy
profiles to EN AW 6060-T6 and close grained, laminated North
European Redwood, durability Class 3 as defined in BS EN 350.
Other timber species can be specified.
Timber frame and casement sections are precision machined
and assembled with pinned and glued comb joints. Mullions and
transoms are assembled with mortice and tenon joints.
External aluminium frame profiles are assembled with sealed
mitred joints by means of crimped angle cleats, bonded with PIB
tape and mechanically fixed with stainless steel pins to internal
timber members.
Windows are fully weatherstripped with EPDM or silicone slot seals.
MANUFACTURE
All windows and doors are purpose made to specification in
accordance with BS 644 : 2009 and EN 14351-1 : 2006.
APPEARANCE
Aluminium profiles are chemically pre-treated and powder coated
in any standard RAL colour in accordance with BS 6496 : 1984.
Standard gloss level 75% +/- 5%. Other gloss levels can be specified.
Timber is fully factory finished with a two or three coat spray
applied water based clear lacquer gloss level 35%, paint to NCS/
RAL specification gloss level 40% or a wide range of standard stain
finishes gloss level 35%.
GLASS AND GLAZING
Windows and doors are factory double or triple glazed to
specification in accordance with BS 6262 : 1982 with 28mm, 36mm
or 48mm dual sealed units constructed to EN 1279-2 : 2002 and
safety glazed where applicable in accordance with BS 6206 : 1981
and Building Regulation 2000 Approved Document K.
Products are typically externally bead glazed employing a drained
and ventilated glazing system with sealed units incorporating warm
edge composite super spacers and argon gas filling as standard.
Sealed units are supported on setting blocks and dry glazed with
EPDM gaskets.
All commercially available high performance glass types can
be specified to meet particular requirements for thermal
insulation, acoustic attenuation, solar control, safety, security
and fire protection where applicable.
PERFORMANCE
All Westcoast products can be considered as genuinely high
performance but frame size, glazing and other factors can, however,
directly affect performance levels. Westcoast technical support
staff should be consulted if particular data is required or for advice
on how to achieve the most cost effective solution for specific
performance targets.
WEATHERTIGHTNESS
Products comply with the following minimum performance standards
when tested in accordance with:
EN 1026 : 2000 (air permeability)
EN 1027 : 2000 (watertightness)
EN 12211 : 2000 (wind resistance)
Air Permeability: 600 Pa (Class 4)
In accordance with EN 12207 : 2000
Watertightness: 900 Pa (Class E900)
In accordance with EN 12208 : 2000
Wind Resistance: 2000 Pa (Class A5)
In accordance with EN 12210 : 2000
Exposure Category : 2000
In accordance with BS 6375 : Part 1 : 2009
THERMAL INSULATION
Products can be glazed to provide whole window ‘U’ values ranging
from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO
10077-2 : 2012.
ACOUSTIC ATTENUATION
Double and triple glazed products can be specified to achieve tested
sound reductions in a range from 31 to 48dB(Rw) in accordance with
EN ISO 10140- 2 : 2012.
SECURED BY DESIGN
All principle products have been tested to comply with PAS 24: 2016.
FIRE RESISTANCE
A selection of fixed and opening lights are classified EI45 and EI245
in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to
EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.
TESTING
A continuous programme of internal and 3rd party independent
testing ensures that Westcoast products remain at the very forefront
of fenestration technology.
INSTALLATION
Westcoast windows and doors are supplied to site fully factory
finished and glazed for installation into prepared openings.
A comprehensive design and installation service is offered.
MAINTENANCE
Maintenance is limited to periodic washing of external aluminium and
glass surfaces with water containing a mild detergent. Internal timber
should be cleaned with a damp cloth or polished.
Ironmongery items are made from corrosion resistant materials
and require only annual inspection and lubrication of appropriate
moving parts.
Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T H G TOP HUNG WINDOW
Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.
200400
600
800
1000
1200
1400
1600
1800
400 600 800 1000 1200
= Min/Max sizes
W1400 1600 1800 2000
H
APPLICATION
For all building types where high level windows are to be remote
operated and where there is no requirement for internal cleaning
or reglazing.
FUNCTION
The traditional top hung open out action provides large unobstructed
openings and is particularly suitable for operation via actuator or
manual remote winding gear for natural ventilation or smoke
vent purposes.
IRONMONGERY
Butt Hinges: Satin anodised finish with integral hinge protection
to maximise free vent areas when fitted with manual or motorised
remote operating mechanisms.
Manual remote operating gear is supplied face fixed to the window.
Motorised remote operating mechanisms can be supplied face fixed
or concealed.
ANTIK
44dBU1.4
U1.2
HEAD
CILL
JAMB
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T H E S Y S T E M S TA N DA R D S
CONSTRUCTION
Composite construction combining extruded aluminium alloy
profiles to EN AW 6060-T6 and close grained, laminated North
European Redwood, durability Class 3 as defined in BS EN 350.
Other timber species can be specified.
Timber frame and casement sections are precision machined
and assembled with pinned and glued comb joints. Mullions and
transoms are assembled with mortice and tenon joints.
External aluminium frame profiles are assembled with sealed
mitred joints by means of crimped angle cleats, bonded with PIB
tape and mechanically fixed with stainless steel pins to internal
timber members.
Windows are fully weatherstripped with EPDM or silicone slot seals.
MANUFACTURE
All windows and doors are purpose made to specification in
accordance with BS 644 : 2009 and EN 14351-1 : 2006.
APPEARANCE
Aluminium profiles are chemically pre-treated and powder coated
in any standard RAL colour in accordance with BS 6496 : 1984.
Standard gloss level 75% +/- 5%. Other gloss levels can be specified.
Timber is fully factory finished with a two or three coat spray
applied water based clear lacquer gloss level 35%, paint to NCS/
RAL specification gloss level 40% or a wide range of standard stain
finishes gloss level 35%.
GLASS AND GLAZING
Windows and doors are factory double or triple glazed to
specification in accordance with BS 6262 : 1982 with 28mm, 36mm
or 48mm dual sealed units constructed to EN 1279-2 : 2002 and
safety glazed where applicable in accordance with BS 6206 : 1981
and Building Regulation 2000 Approved Document K.
Products are typically externally bead glazed employing a drained
and ventilated glazing system with sealed units incorporating warm
edge composite super spacers and argon gas filling as standard.
Sealed units are supported on setting blocks and dry glazed with
EPDM gaskets.
All commercially available high performance glass types can
be specified to meet particular requirements for thermal
insulation, acoustic attenuation, solar control, safety, security
and fire protection where applicable.
PERFORMANCE
All Westcoast products can be considered as genuinely high
performance but frame size, glazing and other factors can, however,
directly affect performance levels. Westcoast technical support
staff should be consulted if particular data is required or for advice
on how to achieve the most cost effective solution for specific
performance targets.
WEATHERTIGHTNESS
Products comply with the following minimum performance standards
when tested in accordance with:
EN 1026 : 2000 (air permeability)
EN 1027 : 2000 (watertightness)
EN 12211 : 2000 (wind resistance)
Air Permeability: 600 Pa (Class 4)
In accordance with EN 12207 : 2000
Watertightness: 900 Pa (Class E900)
In accordance with EN 12208 : 2000
Wind Resistance: 2000 Pa (Class A5)
In accordance with EN 12210 : 2000
Exposure Category : 2000
In accordance with BS 6375 : Part 1 : 2009
THERMAL INSULATION
Products can be glazed to provide whole window ‘U’ values ranging
from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO
10077-2 : 2012.
ACOUSTIC ATTENUATION
Double and triple glazed products can be specified to achieve tested
sound reductions in a range from 31 to 48dB(Rw) in accordance with
EN ISO 10140- 2 : 2012.
SECURED BY DESIGN
All principle products have been tested to comply with PAS 24: 2016.
FIRE RESISTANCE
A selection of fixed and opening lights are classified EI45 and EI245
in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to
EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.
TESTING
A continuous programme of internal and 3rd party independent
testing ensures that Westcoast products remain at the very forefront
of fenestration technology.
INSTALLATION
Westcoast windows and doors are supplied to site fully factory
finished and glazed for installation into prepared openings.
A comprehensive design and installation service is offered.
MAINTENANCE
Maintenance is limited to periodic washing of external aluminium and
glass surfaces with water containing a mild detergent. Internal timber
should be cleaned with a damp cloth or polished.
Ironmongery items are made from corrosion resistant materials
and require only annual inspection and lubrication of appropriate
moving parts.
Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
B H G BOTTOM HUNG WINDOW
Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.
200400
600
800
1000
1200
1400
1600
1800
400 600 800 1000 1200
= Min/Max sizes
W1400 1600 1800 2000
H
APPLICATION
For smoke control ventilation in all building types.
FUNCTION
The bottom hung open out action provides large unobstructed
openings and is particularly suitable for smoke vent purposes when
fitted with automatic remote operating mechanisms.
IRONMONGERY
Butt Hinges: Satin anodised finish with integral hinge protection to
maximise free areas when fitted with motorised remote operating
smoke control mechanisms.
ANTIK
44dBU1.4
U1.2
HEAD
CILL
JAMB
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T H E S Y S T E M S TA N DA R D S
CONSTRUCTION
Composite construction combining extruded aluminium alloy
profiles to EN AW 6060-T6 and close grained, laminated North
European Redwood, durability Class 3 as defined in BS EN 350.
Other timber species can be specified.
Timber frame and casement sections are precision machined
and assembled with pinned and glued comb joints. Mullions and
transoms are assembled with mortice and tenon joints.
External aluminium frame profiles are assembled with sealed
mitred joints by means of crimped angle cleats, bonded with PIB
tape and mechanically fixed with stainless steel pins to internal
timber members.
Windows are fully weatherstripped with EPDM or silicone slot seals.
MANUFACTURE
All windows and doors are purpose made to specification in
accordance with BS 644 : 2009 and EN 14351-1 : 2006.
APPEARANCE
Aluminium profiles are chemically pre-treated and powder coated
in any standard RAL colour in accordance with BS 6496 : 1984.
Standard gloss level 75% +/- 5%. Other gloss levels can be specified.
Timber is fully factory finished with a two or three coat spray
applied water based clear lacquer gloss level 35%, paint to NCS/
RAL specification gloss level 40% or a wide range of standard stain
finishes gloss level 35%.
GLASS AND GLAZING
Windows and doors are factory double or triple glazed to
specification in accordance with BS 6262 : 1982 with 28mm, 36mm
or 48mm dual sealed units constructed to EN 1279-2 : 2002 and
safety glazed where applicable in accordance with BS 6206 : 1981
and Building Regulation 2000 Approved Document K.
Products are typically externally bead glazed employing a drained
and ventilated glazing system with sealed units incorporating warm
edge composite super spacers and argon gas filling as standard.
Sealed units are supported on setting blocks and dry glazed with
EPDM gaskets.
All commercially available high performance glass types can
be specified to meet particular requirements for thermal
insulation, acoustic attenuation, solar control, safety, security
and fire protection where applicable.
PERFORMANCE
All Westcoast products can be considered as genuinely high
performance but frame size, glazing and other factors can, however,
directly affect performance levels. Westcoast technical support
staff should be consulted if particular data is required or for advice
on how to achieve the most cost effective solution for specific
performance targets.
WEATHERTIGHTNESS
Products comply with the following minimum performance standards
when tested in accordance with:
EN 1026 : 2000 (air permeability)
EN 1027 : 2000 (watertightness)
EN 12211 : 2000 (wind resistance)
Air Permeability: 600 Pa (Class 4)
In accordance with EN 12207 : 2000
Watertightness: 900 Pa (Class E900)
In accordance with EN 12208 : 2000
Wind Resistance: 2000 Pa (Class A5)
In accordance with EN 12210 : 2000
Exposure Category : 2000
In accordance with BS 6375 : Part 1 : 2009
THERMAL INSULATION
Products can be glazed to provide whole window ‘U’ values ranging
from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO
10077-2 : 2012.
ACOUSTIC ATTENUATION
Double and triple glazed products can be specified to achieve tested
sound reductions in a range from 31 to 48dB(Rw) in accordance with
EN ISO 10140- 2 : 2012.
SECURED BY DESIGN
All principle products have been tested to comply with PAS 24: 2016.
FIRE RESISTANCE
A selection of fixed and opening lights are classified EI45 and EI245
in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to
EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.
TESTING
A continuous programme of internal and 3rd party independent
testing ensures that Westcoast products remain at the very forefront
of fenestration technology.
INSTALLATION
Westcoast windows and doors are supplied to site fully factory
finished and glazed for installation into prepared openings.
A comprehensive design and installation service is offered.
MAINTENANCE
Maintenance is limited to periodic washing of external aluminium and
glass surfaces with water containing a mild detergent. Internal timber
should be cleaned with a damp cloth or polished.
Ironmongery items are made from corrosion resistant materials
and require only annual inspection and lubrication of appropriate
moving parts.
Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
F KG FIXED LIGHT WINDOW
Note: Size limits also depend on the weight of the glazing. For further information please contact our Technical Department.
Circular windows are available for diameters between 585mm and 1585mm. All circular windows are supplied triple glazed.
APPLICATION
Direct glazed fixed light frame to suite with open out windows
and doors.
FUNCTION
The fixed light can be used in vision areas and at spandrel locations
as part of a screen assembly when opaque glazed or when fitted with
aluminium sandwich panels.
The frames can also be fitted with fixed or moveable blade aluminium
and glass louvres.
SBD
Our fixed light frame
can also accommodate
louvres and many
types of spandrel and
sandwich panels,
please contact us for
further information.
200400
600
800
1000
1200
1400
1600
1800
2000
2200
2400
2600
400 600 800 1000 1200
= Min/Max sizes
W1400 1600 1800 2000 2200 2400 2600
H
ANTIK
44dBU1.4
U1.2
HEAD
CILL
JAMB
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
T H E S Y S T E M S TA N DA R D S
CONSTRUCTION
Composite construction combining extruded aluminium alloy
profiles to EN AW 6060-T6 and close grained, laminated North
European Redwood, durability Class 3 as defined in BS EN 350.
Other timber species can be specified.
Timber frame and casement sections are precision machined
and assembled with pinned and glued comb joints. Mullions and
transoms are assembled with mortice and tenon joints.
External aluminium frame profiles are assembled with sealed
mitred joints by means of crimped angle cleats, bonded with PIB
tape and mechanically fixed with stainless steel pins to internal
timber members.
Windows are fully weatherstripped with EPDM or silicone slot seals.
MANUFACTURE
All windows and doors are purpose made to specification in
accordance with BS 644 : 2009 and EN 14351-1 : 2006.
APPEARANCE
Aluminium profiles are chemically pre-treated and powder coated
in any standard RAL colour in accordance with BS 6496 : 1984.
Standard gloss level 75% +/- 5%. Other gloss levels can be specified.
Timber is fully factory finished with a two or three coat spray
applied water based clear lacquer gloss level 35%, paint to NCS/
RAL specification gloss level 40% or a wide range of standard stain
finishes gloss level 35%.
GLASS AND GLAZING
Windows and doors are factory double or triple glazed to
specification in accordance with BS 6262 : 1982 with 28mm, 36mm
or 48mm dual sealed units constructed to EN 1279-2 : 2002 and
safety glazed where applicable in accordance with BS 6206 : 1981
and Building Regulation 2000 Approved Document K.
Products are typically externally bead glazed employing a drained
and ventilated glazing system with sealed units incorporating warm
edge composite super spacers and argon gas filling as standard.
Sealed units are supported on setting blocks and dry glazed with
EPDM gaskets.
All commercially available high performance glass types can
be specified to meet particular requirements for thermal
insulation, acoustic attenuation, solar control, safety, security
and fire protection where applicable.
PERFORMANCE
All Westcoast products can be considered as genuinely high
performance but frame size, glazing and other factors can, however,
directly affect performance levels. Westcoast technical support
staff should be consulted if particular data is required or for advice
on how to achieve the most cost effective solution for specific
performance targets.
WEATHERTIGHTNESS
Products comply with the following minimum performance standards
when tested in accordance with:
EN 1026 : 2000 (air permeability)
EN 1027 : 2000 (watertightness)
EN 12211 : 2000 (wind resistance)
Air Permeability: 600 Pa (Class 4)
In accordance with EN 12207 : 2000
Watertightness: 900 Pa (Class E900)
In accordance with EN 12208 : 2000
Wind Resistance: 2000 Pa (Class A5)
In accordance with EN 12210 : 2000
Exposure Category : 2000
In accordance with BS 6375 : Part 1 : 2009
THERMAL INSULATION
Products can be glazed to provide whole window ‘U’ values ranging
from 1.4Wm2K to less than 0.8Wm2K in accordance with EN ISO
10077-2 : 2012.
ACOUSTIC ATTENUATION
Double and triple glazed products can be specified to achieve tested
sound reductions in a range from 31 to 48dB(Rw) in accordance with
EN ISO 10140- 2 : 2012.
SECURED BY DESIGN
All principle products have been tested to comply with PAS 24: 2016.
FIRE RESISTANCE
A selection of fixed and opening lights are classified EI45 and EI245
in accordance with EN 13501- 2 : 2007 + A1 : 2009 when tested to
EN1364- 1 : 1999 and EN 1634- 1 : 2014 respectively.
TESTING
A continuous programme of internal and 3rd party independent
testing ensures that Westcoast products remain at the very forefront
of fenestration technology.
INSTALLATION
Westcoast windows and doors are supplied to site fully factory
finished and glazed for installation into prepared openings.
A comprehensive design and installation service is offered.
MAINTENANCE
Maintenance is limited to periodic washing of external aluminium and
glass surfaces with water containing a mild detergent. Internal timber
should be cleaned with a damp cloth or polished.
Ironmongery items are made from corrosion resistant materials
and require only annual inspection and lubrication of appropriate
moving parts.
Since our policy is one of continuous improvement, we reserve the right to change without prior notice the specifications and methods of construction described in this document. No responsibility whatsoever can be accepted for any errors or omissions in, or misrepresentations of the contents. Details shown are for guidance purposes only and may vary according to circumstances. For specific information, refer to Westcoast Windows Systems Limited. Copyright reserved.
T E L : 0 1 3 5 9 2 4 1 9 4 4 E M A I L : I N F O @ W E S T C O A S T W I N D O W S . C O M W W W . W E S T C O A S T W I N D O W S . C O M
C-CTransom
A-AMullion
B-BMullion for fixed sidelight
D-DTransom for fixed lower light
E-ETransom for fixed upper light
156
111
11
1
15
6
11
1
93
49
93
49
94
94
94 94
4994
A A
B B
C
CD
DE
E
Drawing No. :Scale:
Detail :System :
WINDOW SYSTEMANTIK 28
S0061:5 @ A4
A N T I K O P E N O U T W I N D O W S TRANSOM & MULLION DETAILS
System: Antik 28 | Detail: Window System | Drawing No: S006 | Scale: 1:5 @ A4